邻苯三酚红多壁碳纳米管糊电极为传感器分析制药和生物样品中异丙基肾上腺素（英文）

异丙基肾上腺素(ISPR)是一种重要的邻苯二酚胺类药物,广泛用于治疗心脏疾病.然而,过量服用该药对人体非常危险.本文采用邻苯三酚红修饰多壁碳纳米管糊电极(PGRMMWCNTPE)制备了一种新型传感器,用于高灵敏度检测水溶液中的ISPR.采用计时电流法、循环伏安法和方波伏安法考察了PGRMMWCNTPE电极电催化氧化ISPR性能.通过伏安数据计算了ISPR氧化的催化反应速率常数、电子传递系数和扩散系数.在ISPR浓度0.8–570μmol/L范围内建立了线性标准曲线,检测限为0.47μmol/L ISPR.将该传感器用于尿液和药物样品中ISPR检测得到满意结果.     

电氧化异丙肾上腺素的纳米复合电催化剂：用作传感器

在金纳米粒子(AuNPs)上经苯硫酚衍生物(3,4二羟基苯基-偶氮-苯硫酚, DAT)自组装制得了一种新型纳米复合物,用于修饰玻璃碳电极(GCE/AuNP-DAT).采用循环伏安法研究了该新型电极的性质,并将其用作异丙肾上腺素(IP)电催化剂,考察了该纳米复合物的电催化活性,从而得到反应机理和催化反应速率常数.由于GCE/AuNP-DAT电极对尿酸氧化没有电催化活性,因此可将IP的氧化信号从该改进电极中分离出来,从而排除了尿酸对IP测定的干扰.该电极可作为传感器,当用于差动脉冲伏安法测定IP时,线性动态范围为1.0–1500.0μmol/L,检测极限为0.46μmol/L.     

氧化石墨烯-石墨烯纳米复合物传感器检测 对乙酰氨基酚和对氨基苯酚

本文通过简单超声法制备了氧化石墨烯-石墨烯(GO-Gr)碳复合材料,通过扫描电镜和电化学方法进行表征。将其修饰在玻碳电极表面,成功构建了用于对乙酰氨基苯酚(APAP)和对氨基苯酚(PAP)检测的电化学传感器。采用差分脉冲伏安法(DPV)测定APAP和PAP,线性检测范围为0.1～70μmol/L和0.3～60μmol/L,检出限为0.02 和0.1μmol/ L。同时,构建的传感器还表现出良好的稳定性和抗干扰能力,可用于实际样品的检测。     

电氧化异丙肾上腺素的纳米复合电催化剂:用作传感器（英文）

在金纳米粒子(AuNPs)上经苯硫酚衍生物(3,4二羟基苯基-偶氮-苯硫酚,DAT)自组装制得了一种新型纳米复合物,用于修饰玻璃碳电极(GCE/AuNP-DAT).采用循环伏安法研究了该新型电极的性质,并将其用作异丙肾上腺素(IP)电催化剂,考察了该纳米复合物的电催化活性,从而得到反应机理和催化反应速率常数.由于GCE/Au NP-DAT电极对尿酸氧化没有电催化活性,因此可将IP的氧化信号从该改进电极中分离出来,从而排除了尿酸对IP测定的干扰.该电极可作为传感器,当用于差动脉冲伏安法测定IP时,线性动态范围为1.0–1500.0μmol/L,检测极限为0.46μmol/L.     

苯并噻唑和铁氧化物纳米粒子修饰的磁性棒碳糊电极上肼的电催化氧化反应：同时检测肼和苯酚

开发了一种磁性Fe3O4纳米粒子和2-(3,4-二羟苯基)苯并噻唑(DPB)修饰的磁性棒碳糊电极(MBCPE)用于电化学检测肼.首先将DPB自组装在Fe3O4纳米粒子上,然后将此复合物吸附于设计的MBCPE上. MBCPE电极将磁性纳米粒子吸引到电极表面.所得新型电极具有高的导电性和大的有效比表面积,因而对肼的电催化氧化反应有非常大的电流响应.采用伏安法、扫描电镜、电化学阻抗谱、红外光谱和紫外-可见光谱对修饰电极进行了表征.采用伏安法研究了在磷酸盐缓冲溶液(pH=7.0)中MBCPE/Fe3O4NPs/DPB电极上肼的电化学行为.作为电化学传感器, MBCPE/Fe3O4NPs/DPB电极对肼氧化反应表现出极高的电催化活性.在DPB存在下,肼的氧化电势下降,但其催化电流增加.电催化电流与肼浓度在0.1–0.4和0.7–12.0μmol/L二个区间内表现出线性关系,检测限为18.0 nmol/L.另外,研究了MBCPE/Fe3O4NPs/DPB电极同时检测肼和苯酚的性能.伏安实验结果显示,苯酚的线性区域为100–470μmol/L,检测限为24.3μmol/L.采用此电极检测了水样品中的肼和苯酚.     

苯并噻唑和铁氧化物纳米粒子修饰的磁性棒碳糊电极上肼的电催化氧化反应:同时检测肼和苯酚（英文）

开发了一种磁性Fe_3O_4纳米粒子和2-(3,4-二羟苯基)苯并噻唑(DPB)修饰的磁性棒碳糊电极(MBCPE)用于电化学检测肼.首先将DPB自组装在Fe_3O_4纳米粒子上,然后将此复合物吸附于设计的MBCPE上.MBCPE电极将磁性纳米粒子吸引到电极表面.所得新型电极具有高的导电性和大的有效比表面积,因而对肼的电催化氧化反应有非常大的电流响应.采用伏安法、扫描电镜、电化学阻抗谱、红外光谱和紫外-可见光谱对修饰电极进行了表征.采用伏安法研究了在磷酸盐缓冲溶液(pH=7.0)中MBCPE/Fe_3O_4NPs/DPB电极上肼的电化学行为.作为电化学传感器,MBCPE/Fe_3O_4NPs/DPB电极对肼氧化反应表现出极高的电催化活性.在DPB存在下,肼的氧化电势下降,但其催化电流增加.电催化电流与肼浓度在0.1–0.4和0.7–12.0μmol/L二个区间内表现出线性关系,检测限为18.0 nmol/L.另外,研究了MBCPE/Fe_3O_4NPs/DPB电极同时检测肼和苯酚的性能.伏安实验结果显示,苯酚的线性区域为100–470μmol/L,检测限为24.3μmol/L.采用此电极检测了水样品中的肼和苯酚.     

CuNi/β-环糊精/还原氧化石墨烯修饰电极电化学检测多巴胺

建立了一种循环伏安法制备CuNi/β-环糊精/还原氧化石墨烯修饰玻碳电极(CuNi/β-CD/ERGO/GCE)的方法。通过多巴胺在该修饰电极上的电化学行为发现,该电化学传感器实现了快速、灵敏的测定多巴胺。该传感器用差分脉冲伏安法(DPV)测定多巴胺时,其电化学响应电流与多巴胺浓度在0.01~20μmol/L之间呈线性关系,检测限为8 nmol/L。该传感器用于尿液样品中的多巴胺检测,回收率在95.6%~107.2%之间。     

修饰的多壁碳纳米管糊电极用于生物与制药样品中苄丙酮香豆素电催化氧化和测定（英文）

采用一种简单灵敏的方法开发了在多壁碳纳米管修饰的ZnCrFeO_4糊电极(MWCNTs/ZnCrFeO_4/CPE)表面测定苄丙酮香豆素的新型传感器.运用循环伏安法、差示脉冲伏安法、计时电流法和电化学阻抗谱考察了该化学修饰电极上苄丙酮香豆素的电化学性能.结果表明,MWCNTs/ZnCrFeO_4/CPE电极对苄丙酮香豆素氧化表现出较高的电催化活性,在pH=4时,产生峰值氧化电流约0.97 vs Ag/AgCl参比电极.当苄丙酮香豆素浓度在0.02–920.0μmol/L范围内,该峰电流与其呈线性关系,检测极限(3σ)为0.003μmol/L.另外,运用差示脉冲伏安法测定了MWCNTs/ZnCrFeO_4/CPE电极上苄丙酮香豆素的催化反应速率常数和扩散系数.     

电沉积Cu_2O在无酶葡萄糖传感器中的应用

采用电化学沉积法在玻碳电极表面制备了Cu_2O,利用X射线衍射(XRD)和扫描电镜(SEM)对Cu_2O的微观结构和表面形貌进行了表征,通过循环伏安法和计时电流法研究了Cu_2O对葡萄糖的电催化氧化性能。结果表明:该修饰电极对葡萄糖有良好催化作用,葡萄糖检测的线性范围为5.0μmol/L~6.23mmol/L,检测限(S/N=3)为0.4μmol/L。该传感器制备简单,稳定性和重复性好,可用于实际样品的测定。     

扑热息痛在Nafion-石墨烯-纳米金复合膜修饰电极上的电化学行为

利用Nafion,石墨烯(GS)和纳米金(AuNs)的N,N-二甲基甲酰胺(DMF)分散液制备了一种新型纳米复合膜修饰碳糊电极(CPE),建立了一种测定扑热息痛(PCT)的新方法。采用扫描电镜(SCE)对修饰电极进行了表征;利用循环伏安法(CV)研究了PCT在修饰电极上的电化学行为。利用微分脉冲溶出伏安法(DPSV)优化了测定PCT的试验条件。结果表明:PCT在Nafion/GS/AuNs修饰电极上于0.43V处出现了一灵敏的氧化峰(Epa),其电极过程受扩散控制。同时利用氧化峰可以进行微量PCT的检测,其峰电流(ip)与PCT浓度(c)在0.5～10μmol/L和10～900μmol/L范围内均呈良好的线性关系,相关系数分别为0.9968和0.9973,检出限(S/N=3)为0.1μmol/L。复合膜修饰电极稳定性较好,可用于实际药品中扑热息痛的含量的快速检测。     

Electrochemical detection of dihydromyricetin using a DNA immobilized ethylenediamine/polyglutamic modified electrode

A novel voltammetric sensor, based on DNA immobilized on the surface of an ethylenediamine/polyglutamic (En/PGA) modified glassy carbon electrode (GCE), was constructed and used for determination of dihydromyricetin (DMY). The electrochemical behaviour of DMY at this sensor was investigated in pH 3.6 NaAc-HAc buffer solutions by cyclic voltammetry (CV) and differential pulse anodic voltammetry (DPV). The oxidation of DMY is an adsorption-controlled irreversible process. The oxidation mechanism was proposed and discussed. It was found that the modified electrode exhibited a linear voltammetric response for DMY in the range of 4.0 × 10(-8) mol L(-1) to 2 × 10(-6) mol L(-1), with a detection limit of 2 × 10(-8) mol L(-1). The method was also applied successfully to detect DMY in an ampelopsis sample with satisfactory results.     

Electrocatalytic Oxidation of Calcium Folinate on Carboxyl Graphene Modified CuxO/Cu Electrode

Carboxyl graphene modified Cu_xO/Cu electrode was fabricated. The bare copper electrode was firstly anodic polarized in 1.0 mol/L NaOH solution in order to get Cu_xO nanoparticles, then the carboxyl graphene (CG) was electrodeposited on the Cu_xO/Cu electrode by cyclic potential sweeping. The electrocatalytic oxidation behaviors of calcium folinate (CF) at the graphene modified Cu_xO/Cu electrode were investigated by cyclic voltammetry. A positive scan polarization reverse catalytic voltammetry was used to obtain the pure catalytic oxidation current. The graphene modified Cu_xO/Cu electrode was served as the electrochemical sensor of CF, a highly sensitivity of 22.0 μA·(μmol/μL)^-1cm^-2 was achieved, and the current response was linear with increasing CF concentration in the range of 2.0×10^-7 mol/L to 2.0×10^-5 mol/L, which crossed three orders of magnitude, and the detection limit was found 7.6×10^-8 mol/L (S/N=3). In addition, the proposed sensor was successfully applied in determination of CF in drug sample.     

Voltammetric determination of isoproterenol using a 5-amino-2’,4’-dimethoxybiphenyl-2-ol modified carbon nanotube paste electrode

A new electrochemical sensor for determination of isoproterenol(IP) is described.The sensor is based on carbon paste electrode (CPE) modified with 5-amino-2’,4’-dimethoxybiphenyl-2-ol(5ADMB) and takes the advantages of carbon nanotubes(CNTs). Under the optimum pH of 7.0,the oxidation of IP occurs at a potential about 210 mV less positive than that of the unmodified CPE. The oxidation currents increased linearly with two concentration intervals of IP,one is 0.09 to 20.0 |xmol/L and,the other is 20.0 to 400.0μmol/L.The detection limit(3σ) obtained by square wave voltammetry(SWV) was 39.0 nmol/L.The practical application of the modified electrode was demonstrated by determining IP in IP ampoule,urine and human blood serum samples.     

A Sensitive Simultaneous Determination of Adrenalin and Paracetamol on a Glassy Carbon Electrode Coated with a Film of Chitosan/Room Temperature Ionic Liquid/Single‐Walled Carbon Nanotubes Nanocomposite

The present work demonstrates that simultaneous determination of adrenalin (AD) and paracetamol (PAR) can be performed on single‐walled carbon nanotube/chitosan/ionic liquid modified glassy carbon electrode (SWCNT‐CHIT‐IL/GCE). The electro‐oxidations of AD and PAR were investigated with cyclic voltammetry (CV), differential pulse voltammetry (DPV) and also chronoamperometry (CA) methods. DPV experiments showed that the oxidation peak currents of AD and PAR are proportional to the corresponding concentrations over the 1–580 μmol/L and 0.5–400 μmol/L ranges, respectively. The RSD at a concentration level of 15 μmol/L AD and 15 μmol/L PAR were 1.69% and 1.82%, respectively. Finally the modified electrode was used for simultaneous determination of AD and PAR in real samples with satisfactory results.     

在3,4-二羟基肉桂酸介质中以多壁碳纳米管为传感器电催化检测L-半胱氨酸(英文)

A highly sensitive electrochemical sensor was prepared for the determination of L-cysteine using a modified multiwall carbon nanotubes paste electrode in the presence of 3,4-dihydroxycinnamic acid(3,4-DHCA) as a mediator, based on an electrocatalytic process. The results indicate that the electrode is electrocatalytically efficient for the oxidation of L-cysteine in the presence of 3,4-DHCA. The interaction between the mediator and L-cysteine can be used for its sensitive and selective determination. Using chronoamperometry, the catalytic reaction rate constant was calculated to be 2.37 × 102 mol–1 L s–1. The catalytic peak current was linearly dependent on the L-cysteine concentration in the range of 0.4–115 μmol/L. The detection limit obtained by linear sweep voltammetry was 0.25 μmol/L. Finally, the modified electrode was examined as a selective, simple, and precise new electrochemical sensor for the determination of L-cysteine in real samples.     

A NADH Sensor Based on 1,2‐Naphththoquinone Electropolymerized on Multi‐walled Carbon Nanotubes Modified Glassy Carbon Electrode

A new carbon nanotubes modified electrode (poly‐Nq‐MWCNTs/GCE) was fabricated by electropolymerization of 1,2‐naphththoquinone to the surface of multi‐walled carbon nanotubes modified electrode by casting method. The morphology of the nanocomposite was characterized by scanning electron microscopy. Cyclic voltammetry and chronoamperometry were applied to investigate the electrochemical properties of the poly‐Nq‐MWCNTs nanocomposite modified electrode. The result of electrochemical experiments showed that such modified electrode had a favorable catalytic ability to oxidation of β‐nicotinamide adenine dinucleotide (NADH). The resulted sensor was sensitiveness to NADH and achieved 95β of the steady‐state current within 5s. Furthermore, the anodic peak current was linear to the concentration of NADH for the range from 1.0 μM to 0.14 mM. The linear equation was: I(μA) = 0.3987 + 0.1035c (μmol/L), the correlation coefficient r = 0.9962, the detect limit is down to 1 × 10^?7 M (S/N = 3) and the sensitivity is 0.1035 μA/mmol. The well catalytic activity of the sensor was ascribed to the synergistic effect role played by MWCNTs and poly‐Nq. Moreover, the based sensor possesses good stability and reproducibility.     

Construction of a novel electrochemical sensor based on molecularly imprinted polymers for the selective determination of chlorpyrifos in real samples

We present a novel electrochemical sensor based on an electrode modified with molecularly imprinted polymers for the detection of chlorpyrifos. The modified electrode was constructed by the synthesis of molecularly imprinted polymers by a precipitation method then coated on a glassy carbon electrode. The surface morphology of the modified electrode was characterized by using field‐emission scanning electron microscopy and transmission electron microscopy. The performance of the imprinted sensor was thoroughly investigated by using cyclic voltammetry and differential pulse voltammetry. The imprinted electrochemical sensor displayed high repeatability, stability, and selectivity towards the template molecules. Under the optimal experimental conditions, the peak current response of the imprinted electrochemical sensor was linearly related to the concentration of chlorpyrifos over the range 1 × 10⁻¹⁰–1 × 10⁻⁵ mol/L with a limit of detection of 4.08 × 10⁻⁹ mol/L (signal‐to‐noise ratio = 3). Furthermore, the proposed molecularly imprinted electrochemical sensor was applied to the determination of chlorpyrifos in the complicated matrixes of real samples with satisfactory results. Therefore, the molecularly imprinted polymers based electrochemical sensor might provide a highly selective, rapid, and cost‐effective method for chlorpyrifos determination and related analysis.     

Voltammetry as the First Method for Direct Determination of a Novel Antagonist of A2A Adenosine Receptors

In this article, for the first time, the analytical method for determination of a novel antagonist of A_2A adenosine receptors (8‐(4‐methoxyphenyl)‐4‐oxo‐4,6,7,8‐tetrahydroimidazo[2,1‐c][1,2,4]triazine‐3‐carbohydrazide, namely IMT), which can be used as a drug for liver diseases, was presented. For this purpose a commercially available boron‐doped diamond electrode (BDDE) in combination with differential pulse voltammetry (DPV) was applied. It was found by cyclic voltammetry (CV) that IMT displays at BDDE, as a sensor, two well‐defined oxidation peaks at potentials of 0.81 and 1.18 V and one reduction peak at 1.1 V vs. Ag/AgCl in 0.1 mol L^?1 acetate buffer (pH 4.5±0.1). The oxidation and reduction mechanism of IMT was proposed. The developed DPV method allowed the successful determination of IMT in the range of 0.05–50 μmol L^?1 with detection limit equal to 0.0094 μmol L^?1 and without any chemical modifications and electrochemical pretreatment of the electrode surface. The proposed procedure allows the determination of IMT in vitro directly from urine samples.     

基于羧基化多壁碳纳米管修饰玻碳电极快速检测氨基脲的研究

基于羧基化多壁碳纳米管修饰的玻碳电极(CMWCNTs/GCE),构建了一种灵敏检测氨基脲(SEM)的电化学传感器.采用傅里叶变换红外光谱、透射电子显微镜、电化学阻抗谱对修饰材料进行表征.结果表明,羧基化的多壁碳纳米管出现羧基碳氧双键的红外特征峰,管径明显减小,长度变短,电化学阻抗值显著减小.在1 mol/L HAc-NaAc缓冲液中,利用循环伏安法和时间-电流曲线研究了SEM在CMWCNTs修饰电极上的电化学行为.SEM在修饰电极上呈现不可逆的氧化峰.与裸电极相比,氧化峰电流明显增大.在最佳实验条件(pH 7.0,扫描速度为0.1 V/s)下,测得SEM在5.00×10-6~1.09×10-3mol/L浓度范围内与氧化峰电流呈线性关系,线性方程为IP(μA)=-0.472+0.0599C(μmol/L),相关系数r=0.997,检出限为1.88×10-7 mol/L(S/N=3).在实际猪肝样品检测中加标回收率为92.8%~98.0%.     

Development of a Sensor Based on Modified Carbon Paste with Com Iron(III) Protoporphyrin Immobilized on SiNbZn Silica Matrix for L‐tryptophan Determination

In this work, SiO₂/Nb₂O₅/ZnO prepared by the sol‐gel processing method was used as substrate base for immobilization of the protoporphyrin‐IX ion. Iron(III) ion was inserted into the porphyrin ring (SiNbZn‐PPFe). A simple square wave voltammetry method based on a composite sensor carbon paste electrode of this material,designed as EPC‐SiNbZn‐PPFe, was developed and validated successfully for the determination of L‐tryptophan (Trp). The optimum conditions were obtained by using sensor modified with 18.00 mg SiNbZn‐PPFe material, 12.00 mg graphite powder and 6.0 μL mineral oil and phosphate buffer 0.3 mol L⁻¹ pH 7.0. The sensitivity of the sensor was found to be 0.523 AL mol ⁻¹, linear range from 10 to 70 μmol L⁻¹ and limit of detection of 3.28 μmol L⁻¹. Therefore, the developed method was successfully applied for the Trp determination in real samples of pharmaceutical formulation and can be used for routine quality control pharmaceutical formulations containing Trp.