Na/Mn摩尔比对层状O2结构Liy[Li1/6Mn5/6]O2的晶体结构及化学组成的影响

层状材料;Na/Mn摩尔比对层状O2结构Liy[Li1/6Mn5/6]O2的晶体结构及化学组成的影响     

层状碳及层状碳/硫酸铅复合材料的制备与应用

碳酸钾或碳酸钠颗粒作催化剂基底,采用化学气相沉积（CVD）制得类似于石墨烯的层状碳材料,并经原位化学沉积可得层状碳/硫酸铅复合材料. 用X射线衍射（XRD）、热重分析、扫描电镜（SEM）和透射电镜（TEM）分析与测试样品. 结果表明,层状碳为无定型碳层,复合材料为无定型碳层与附着其上的细小硫酸铅颗粒的复合. 上述层状碳和复合材料作为负极添加剂应用于铅酸电池中,测试了电池电化学性能. 结果表明,电池大电流放电比容量和循环寿命均明显提高. 通过电化学交流阻抗谱图（EIS）、充放电曲线和负极失效后的SEM照片证实,加入添加剂能够降低反应阻抗、减小极化及有效抑制极板硫酸盐化.     

原位聚合法制备聚丙烯酸甲酯/ZnAl层状双氢氧化物插层纳米复合材料及其形貌特征

近 2 0年来 ,聚合物 /层状无机物纳米复合材料引起了广泛关注 ,与聚合物材料相比 ,该类纳米复合材料在力学、热稳定性、阻燃、气体阻隔等性能方面都有显著增强 .但所报道的绝大部分无机物均采用蒙脱土为代表的层状硅酸盐[1～ 3] ,而以层状双氢氧化物 (Layered double hydroxide,LDH)为基础制备的聚合物 /层状无机物纳米复合材料的报道极少 .LDH是由水镁石结构中的二价阳离子 (M2 + )被三价阳离子 (M3+ )取代而形成的 ,层上产生的剩余正电荷被吸附在层间的阴离子平衡 .与层状硅酸盐相比 ,L DH层间电荷密度高 ,层与层之间相互作用强 ,导…     

SDS/正癸醇/甘油与SDS/正癸醇/甲酰胺液晶结构

以极性有机物为溶剂制备展状液晶已经引起重视,但关于极性有机溶剂对层状液晶结构和稳定性影响的研究还很不够.我们曾以~2H NMR测量研究了以甲酰胺代替甘油为溶剂,对非水层状液晶SDS/C_(10)H_(21)OH/溶剂体系稳定性的影响.本文则以小角X射线衍射测量,研究以甲酰胺代替甘油后,对层状液晶SDS/C_(21)H_(21)OH/溶剂体系结构的影响。     

聚合物/层状硅酸盐插层纳米复合材料的研究

简述了聚合物 /层状硅酸盐插层纳米复合材料方面的研究进展。阐述了层状硅酸盐的结构与性质以及纳米复合材料形成过程的热力学原理。重点介绍了尼龙、聚丙烯等聚合物的层状硅酸盐插层纳米复合材料的现状和技术发展趋势     

聚丙烯/层状双氢氧化物纳米复合材料研究进展

聚丙烯/层状双氢氧化物纳米复合材料是近年来开发的新型聚合物基复合材料,具有与纯聚合物基体不同的结晶行为,而且表现出优异的机械力学性能、耐热性能、阻燃性能和耐紫外线功能等,有着广泛的应用前景。本文首先对层状双氢氧化物的结构、组成与制备方法进行简要介绍,然后重点阐述了聚丙烯/层状双氢氧化物纳米复合材料的制备、分散结构表征、结晶行为以及力学和热学等性能方面的研究进展,最后对其应用前景进行展望。     

Triton X-100/正癸醇/水层状液晶制备泡囊

利用层状结构在超声振荡下可以弯曲变形的特点 ,以TritonX 100/n C10H21OH/H2O体系生成的层状液晶为介质制备泡囊,所得泡囊分布比较均匀 ,囊径在0.2～0.5μm之间.研究了层状液晶组成、pH、超声振荡时间等因素对所制泡囊的 ζ电位及微极性的影响.     

柔性ZnNi/Al-LDHs/碳纤维复合材料的制备及光-电催化特性

本文采用电化学方法,制备了一种便于回收和分离的柔性锌镍/铝层状双羟基/碳纤维(ZnNi/Al-LDHs/CFs) 复合材料. 采用X 射线衍射、红外光谱、场发射扫描电镜、电感耦合等离子体原子发射光谱和电化学阻抗光谱技术表征了ZnNi/Al-LDHs/CFs 复合材料的结构、形貌和光电催化性能. 与单独使用Zn/Al-LDHs/CFs 作为光催化剂或Ni/Al-LDHs/CFs 作为电催化剂相比较,ZnNi/Al-LDHs/CFs 复合材料显示了良好的光-电双功能催化特性,既可被用作乙醇和甲醇氧化的电催化剂,也可光电协同催化 2,6-二氯苯酚降解.     

LiNi1/3Co1/3Mn1/3O2的Si/F复合掺杂及电化学性能

以共沉淀法合成的(Ni_1/3Co_1/3Mn_1/3)(OH)₂为前驱体，在氧气氛中合成了层状正极材料LiNi_1/3Co_1/3Mn_1/3O₂，用F、Si离子复合掺杂的方法对其进行改性。X射线粉末衍射(XRD)分析表明，复合掺杂没有改变晶体的六方单相层状结构。扫描电镜(SEM)观察到产物呈类球形且颗粒均匀，平均粒径在0.1～0.2 μm。循环伏安(CV)性能显示，复合掺杂提高了该材料中Li⁺离子脱-嵌过程的可逆性。电化学阻抗谱(EIS)测试结果表明，复合掺杂降低了该材料的电化学极化，抑制其在循环过程中电化学反应阻抗的增加。复合掺杂后的层状材料首次放电容量为172.8 mAh·g^-1 (0.2C)，20次循环后仍有166.4 mAh·g^-1。     

丁苯三嵌段共聚物/改性纳米层状白泥复合弹性体的力学性能

热塑性弹性体;混杂纳米复合材料;丁苯三嵌段共聚物/改性纳米层状白泥复合弹性体的力学性能     

Liquid–liquid equilibria of water/acetic acid/1-butanol system — effects of sodium (potassium) chloride and correlations

Sodium and potassium chloride were experimentally shown to be effective in modifying the liquid–liquid equilibrium (LLE) of water/acetic acid/1-butanol system in favour of the solvent extraction of acetic acid from an aqueous solution with 1-butanol, particularly at high salt concentrations. Both the salts enlarged the area of the two-phase region; decreased the mutual solubilities of water and marginally decreased the concentrations of 1-butanol and acetic acid in the aqueous phase while significantly increased the concentrations of the same components in the organic phase. These effects essentially increased the heterogeneity of the system, which is an important consideration in designing a solvent extraction process. The equilibrium data were well correlated by Eisen–Joffe equation with respect to the overall molar ratio of salt to water in the liquid phases. By expressing the salt–solvent interaction parameters as a third order polynomial of salt concentration in the liquid phase, Tan's modified NRTL model [T.C. Tan, Trans. Inst. Chem. Eng., Part A 68 (1990) 93–103.] for solvent mixtures containing salts or dissolved non-volatile solutes was able to provide good correlation of the present LLE data. Using the regressed salt concentration coefficients for the salt–solvent interaction parameters and the solvent–solvent interaction parameters obtained from the same system without salt, the calculated phase equilibria compared satisfactorily well with the experimental data.     

Extraction of cobalt(Ⅱ) from aqueous solution by N,N'-carbonyl difatty amides

The development of economic and environmentally friendly extractants to recover cobalt metal is required due to the increasing demand for this metal.In this study,solvent extraction of Co(Ⅱ) from aqueous solution using a mixture of N,N’-carbonyl difatty amides(CDFAs) synthesised from palm oil as the extractant was carried out.The effects of various parameters such as acid,contact time,extractant concentration,metal ion concentration and stripping agent and the separation of Co(Ⅱ) from other metal ions such as Fe(Ⅱ),Ni(Ⅱ),Zn(Ⅲ) and Cd(Ⅱ) were investigated.It was found that the extraction of Co(Ⅱ) into the organic phase involved the formation of 1:1 complexes.Co(Ⅱ) was successfully separated from commonly associated metal ions such as Fe(Ⅱ),Ni(Ⅱ),Zn(Ⅲ) and Cd(Ⅱ).Co(Ⅱ) stripping from the loaded organic phase was studied in aqueous solution.These results are useful to recover Co(Ⅱ) from aqueous solution utilising(CDFAs) as an extractant.     

Initial study of two-phase laminar flow extraction chip for sample preparation for gas chromatography

A sample preparation method for gas chromatography using a two-phase, laminar flow extraction PDMS/glass chip has been developed. A stable two-phase laminar interface was obtained by surface modification, and the organic extraction phase and the aqueous sample phase were separated effectively when the two-phase laminar flows exit the chip. Experiments were conducted on the chip to extract ephedrine from aqueous solution. Good reproducibility was obtained over the entire range of ephedrine concentration using the extraction chips (CV range 2.7%-4.5%). Effects of salt and solvent on extraction efficiency were studied.     

Aqueous two‐phase systems based on deep eutectic solvents and their application in green separation processes

As a new environmentally friendly separation technology, deep eutectic solvent based aqueous two‐phase systems are extensively applied in various fields. Herein, we review recent advances in this field and highlight the possible directions of future developments. This article focuses on the effects of deep eutectic solvent and inorganic salts on the phase equilibrium, the microstructure of deep eutectic solvent based aqueous two‐phase systems, the applications of deep eutectic solvent based aqueous two‐phase systems in separation (proteins, biopolymers, saponins, and organic acids), and removal and recovery technologies for deep eutectic solvent from aqueous two‐phase systems.     

正离子型疏水改性聚氧乙烯单成相组分双水相系统的相行为

对正离子型疏水改性聚氧乙烯(HM-EO)单成相组分双水相系统的相行为进行了考察,并分析其电荷特性.HM-EO在水溶液中呈现两亲性,可以形成胶束,进而形成带电的胶束簇集体.通过改变溶液的pH值、盐浓度及添加带相反电荷的表面活性剂SDS,可改变胶束簇集体的带电状态,从而影响系统的相行为.增大pH值,有利于系统的分相.盐的添加也可以增大双水相两相区域,正离子影响次序为K+>Na+,负离子次序为SO42->F->Cl->Br->I-.进一步考察了HM-EO和SDS之间的相互作用,结果表明SDS能与HM-EO形成混合胶束簇集体,改变HM-EO双水相系统的带电特性.     

Separation, concentration and determination of chloramphenicol in environment and food using an ionic liquid/salt aqueous two-phase flotation system coupled with high-performance liquid chromatography

Ionic liquid–salt aqueous two-phase flotation (ILATPF) is a novel, green, non-toxic and sensitive samples pretreatment technique. ILATPF coupled with high-performance liquid chromatography (HPLC) was developed for the analysis of chloramphenicol, which combines ionic liquid aqueous two-phase system (ILATPS) based on imidazolium ionic liquid (1-butyl-3-methylimidazolium chloride, [C₄mim]Cl) and inorganic salt (K₂HPO₄) with solvent sublation. In ILATPF systems, phase behaviors of the ILATPF were studied for different types of ionic liquids and salts. The sublation efficiency of chloramphenicol in [C₄mim]Cl–K₂HPO₄ ILATPF was influenced by the types of salts, concentration of K₂HPO₄ in aqueous solution, solution pH, nitrogen flow rate, sublation time and the amount of [C₄mim]Cl. Under the optimum conditions, the average sublation efficiency is up to 98.5%. The mechanism of ILATPF contains two principal processes. One is the mechanism of IL–salt ILATPS formation, the other is solvent sublation. This method was practical when applied to the analysis of chloramphenicol in lake water, feed water, milk, and honey samples with the linear range of 0.5–500 ng mL⁻¹. The method yielded limit of detection (LOD) of 0.1 ng mL⁻¹ and limit of quantification (LOQ) of 0.3 ng mL⁻¹. The recovery of CAP was 97.1–101.9% from aqueous samples of environmental and food samples by the proposed method. Compared with liquid–liquid extraction, solvent sublation and ionic liquid aqueous two-phase extraction, ILATPF can not only separate and concentrate chloramphenicol with high sublation efficiency, but also efficiently reduce the wastage of IL. This novel technique is much simpler and more environmentally friendly and is suggested to have important applications for the concentration and separation of other small biomolecules.     

Production and purification of tartrate dehydrogenase

Tartrate dehydrogenase (TDH) is a stereospecific intracellular enzyme produced byPseudomonas putida. Several methods for separation of nucleic acids from the proteins in cell homogenate were compared in this study. These methods included precipitation (using streptomycin sulfate, manganous sulfate, and protamine sulfate) and aqueous two-phase extraction. Under optimal conditions of separation, a single-step aqueous two-phase extraction followed by back-extraction of the enzyme from enzyme-rich PEG-phase resulted in77% recovery of enzyme. This compared favorably with 50% enzyme recovery using protamine sulfate treatment. Furthermore, the remaining enzyme activity was accounted in the nucleic acid-rich dextran phase and the spent-PEG phase, suggesting that a multistep extraction process would increase enzyme recovery even more. Under the conditions of aqueous two-phase extraction, the selectivity of proteins over nucleic acids was 30, indicating a high degree of separation of proteins and nucleic acids in this process. The experimental data and their implications are presented.

     

十四烷基三甲基氯化铵/十二烷基苯磺酸钠混合表面活性剂双水相体系的萃取性能

研究了十四烷基三甲基氯化铵(TTAC)与十二烷基苯磺酸钠(SDBS)混合表面活性剂水溶液双水相体系的分相情况、萃取性能及两相的微观结构.结果表明,TTAC/SDBS混合表面活性剂水溶液在30℃下能够形成稳定的双水相体系;该双水相体系对亚甲基蓝、靛红都具有一定的萃取分离作用.其上、下两相的微观结构明显不同,这是其能够形成稳定双水相体系且具有萃取作用的重要原因.     

Salt Effects on the Aqueous Two-Phase System of Gemini(12-3-12, 2Br<Superscript>−</Superscript>)/SDS/PEG

The effect of added salts (NaCl, KCl and NaBr) on the aqueous two-phase system (ATPS) formed in mixtures of Gemini(12-3-12, 2Br⁻)/sodium dodecyl sulfate/polyethylene glycol has been investigated. Phase diagrams of the aqueous systems containing Gemini(12-3-12, 2Br⁻), sodium dodecyl sulfate (SDS), polyethylene glycol(PEG) and a salt have been determined experimentally at 313.15 K. The results indicate that the addition of salts not only induces the appearance of ATPS-A (in which anionic surfactant is in excess), shortens the phase separation time, enlarges the regions of ATPS-C (in which cationic surfactant is in excess), and decreases the minimum concentration required for forming an ATPS, but also alters the matching between anionic and cationic surfactants. Extractive experiments also showed that these salts notably enhance the extraction ability of ATPS; the Gemini-rich phase exhibits prominent cohesive action with xylenol orange, regardless of whether or not it is the upper phase or the lower phase.     

Separation of AM(III) by extraction from nitrate solutions using some quaternary benzylammonium salts

Benzyldimethyldodecylammonium nitrate and benzyltrioctylammonium nitrate were used for the extraction of Am(III) from aqueous nitrate solutions. The dependence of the extraction performance for Am(III) on the concentration of nitric acid, the kind and concentration of salting-out agents in the aqueous phase, and the kind of solvent was investigated. Americium is extracted by the above quarternary salts as a R₄NAm(NO₃)₄ associate. The extraction of Am(III) is compared with the extraction of lanthanides. The high differences in the distribution coefficients for lanthanides and americium can be utilized for the separation of lanthanides and americium.