光子晶体光纤超连续谱产生过程中色散波的孤子俘获研究

基于光子晶体光纤中脉冲演化遵循的非线性薛定谔方程, 用数值模拟的方法分别研究了飞秒脉冲在单零色散点和双零色散点光子晶体光纤中超连续谱的产生和色散波的孤子俘获现象. 结果表明: 与单零色散点光子晶体光纤相比, 双零色散点光子晶体光纤产生的超连续谱既包含了蓝移色散波, 又包含了红移色散波, 且当满足群速度匹配时, 孤子通过四波混频不仅能俘获蓝移色散波, 而且能俘获红移色散波, 从而产生新的俘获波频谱成分. 为了清楚地观察脉冲传输的时频特性, 通过模拟交叉相关频率分辨光学开关技术, 得到了孤子俘获色散波的演化过程. 关键词： 超连续谱 色散波 孤子俘获 光子晶体光纤     

An efficient method for supercontinuum generation in dispersion-tailored Lead-silicate fiber taper

In this paper we theoretically study the broadband mid-IR supercontinuum generation (SCG) in a lead-silicate microstructured fiber (the glass for simulation is SF57). The total dispersion of the fiber can be tailored by changing the core diameter of the fiber so that dispersion profiles with two zero dispersion wavelengths (ZDWs) can be obtained. Numerical simulations of the SCG process in a 4 cm long SF57 fiber/fiber taper seeded by femto-second pulses at telecommunications wavelength of 1.55 µm are presented. The results show that a fiber taper features a continuous shift of the longer zero dispersion wavelength. This extends the generated continuum to a longer wavelength region compared to fibers with fixed ZDWs. The phase-matching condition (PMC) is continuously modified in the fiber taper and the bandwidth of the generated dispersive waves (DWs) is significantly broadened.     

光子晶体光纤反常色散区抽运产生超连续谱的相干特性分析

使用复互相干度的定义对超连续谱的相干性进行了数值计算,得到了不同功率抽运情况下的脉冲谱展宽以及超连续谱相干性的变化.结果表明孤子自频移以及色散波辐射是抽运波长位于光纤反常色散区情况下超连续谱展宽的主要物理机理,而超连续谱的相干性则主要受到调制不稳定性的影响.调制不稳定性放大抽运脉冲自身携带的随机噪声,使得非线性效应产生的光谱成分具有随机的相位与幅度,引起超连续谱相干性的下降. 抽运功率越高, 调制不稳定性增益越高,噪声对超连续谱产生的作用越强, 超连续谱的相干性越差.要获得高相干的超连续谱, 需采用峰值功率较小的脉冲进行抽运.要获得大谱宽高相干的超连续谱, 则需要合理选择抽运脉冲功率.     

光子晶体光纤包层可见光及红外宽带色散波产生

对光子晶体光纤包层3个空气孔之间节区的传光特性进行了分析, 对比了纤芯与包层节区传光的模场面积、非线性系数及色散特性, 得到光子晶体光纤包层节区具有小芯、高非线性的特点.在包层空气孔较大的情况下, 得到了双零色散曲线.根据色散曲线, 分析了色散波产生的相位匹配特性, 得到了色散波中心波长随抽运波长及功率的变化规律.制备出了所设计的光子晶体光纤, 实验得到了在可见光及红外大于300 nm的宽带色散波, 并给出了色散波随抽运波长及功率的变化规律.实验和理论分析结果一致, 为波长变换及超连续宽带光源的研究奠定了基础. 关键词： 光子晶体光纤 色散波 相位匹配 非线性     

双零色散光子晶体光纤中超连续谱的产生及控制

 通过数值模拟飞秒脉冲在具有双零色散波长的光子晶体光纤中的传输过程,详细分析了超连续谱的产生和控制机制.结果表明：中心波长处于反常色散区的泵浦脉冲在高阶非线性和高阶色散等作用的调制下,将演化为基孤子和正常色散区的两个色散波|该色散波进而经与之相位匹配的基孤子相干加强而使频谱展宽形成超连续谱,同时两个色散波上出现了干涉引起的振荡现象.进一步对比三种结构的光子晶体光纤中超连续谱的特点,定量分析了两色散波对超连续谱的限制作用,阐述了结构参量对超连续谱的影响.基于上述结论,结合对色散波的中心波长与光子晶体光纤的色散曲线、结构参量之间关系的分析,提出了设计光子晶体光纤的结构来控制超连续谱的方法.作为例证,通过优化光子晶体光纤结构理论上实现了频谱分量覆盖可见光区的平坦超连续谱.     

飞秒脉冲在硅波导中产生超连续谱的研究

利用非线性薛定谔方程对飞秒脉冲在硅波导中的传输以及超连续谱的产生进行了研究,计算和分析了色散参量及非线性损耗在超连续谱的产生过程中的影响.结果表明,孤子分裂是飞秒脉冲在硅波导中产生超连续谱的主要机理.飞秒脉冲中心波长与波导零色散点的相对位置对超连续谱的产生有极大影响.当中心波长位于近零色散点的反常色散区时,孤子分裂现象最明显,谱宽远大于在零色散波长及正常色散处入射时的情况,并且达到稳定展宽所需波导长度最短.其次,高阶色散的大小也会影响光谱展宽,三阶色散绝对值较小时,能够获得较大的展宽.另外,由于双光子吸收效应带来大量损耗,限制了谱宽,并且随着初始脉冲功率的逐渐增大,展宽出现饱和现象. 关键词： 超连续谱 孤子分裂 色散 硅波导     

纳米光纤的色散特性及其超连续谱产生

通过数值计算,分析了纳米光纤的色散特性,并比较了纳米光纤中不同直径和不同材料的色散特性.结果表明：二氧化硅纳米光纤有两个零色散波长,随光纤直径的增大,其色散曲线趋于平坦,零色散波长也随之发生改变;硅光纤只有一个零色散波长,且随着直径的增大,零色散波长向长波方向移动.采用广义非线性薛定谔方程来描述超短激光脉冲在纳米光纤中的传输演化过程,利用分步傅里叶方法求解方程.比较了超短脉冲在光纤不同色散区传输时,色散对超连续谱产生的影响以及脉冲波形的演化.在正常色散区,超连续谱谱宽很窄,而在零色散区和反常色散区则可产生 关键词： 色散 超连续谱产生 非线性光学 纳米光纤     

光子晶体光纤产生飞秒超连续谱的实验研究

研究了飞秒脉冲经过光子晶体光纤时超连续谱产生的物理机制。采用输出波长可调谐的钛宝石光参量放大器作为泵浦源,光纤光谱仪测量不同泵浦功率和不同泵浦波长条件下光子晶体光纤产生的超连续谱的光谱图,对进行了归一化处理后的不同泵浦功率和不同泵浦波长条件下的超连续谱进行对比,分析影响光子晶体光纤超连续谱差异的物理机制。实验结果表明,当泵浦波长不变时,随着入射泵浦脉冲平均功率的增大,波峰增多,谱宽也逐渐加宽并伴随着出现能量向短波方向集中的现象,泵浦功率到达一定强度时,超连续谱的宽度最后到达饱和,谱的包络趋于稳定;入射光功率稳定在300 mW时,超连续谱的宽度和形状皆受到泵浦波长影响,在760～840 nm范围内,泵浦波长越长,波峰数越多,泵浦脉冲波长离零色散点越近,光子晶体光纤产生的超连续谱谱宽会越宽,超连续谱的形状相对越平坦。     

泵浦波长对光子晶体光纤产生超连续谱的影响

采用钛宝石光参量放大器作为泵浦源,利用其输出波长可调谐性,研究了不同泵浦波长对光子晶体光纤中产生超连续谱的影响,结果表明光子晶体光纤中零色散点处的群时延和1.4 μm处的OH根离子的吸收对超连续谱的平坦度影响很大,并且泵浦波长离光纤的零色散点越远,产生的超连续谱平坦度越差,甚至在可见光区产生的各个频率峰还只是分离的,没有形成超连续谱.当泵浦波长为1.2 μm时,获得了带宽为300 nm~1350 nm的超连续谱,谱宽超过了两个倍频程.     

Supercontinuum generation in short tellurite microstructured fibers pumped by a quasi-cw laser

We investigate supercontinuum (SC) generation in highly nonlinear tellurite microstructured fibers pumped by a continuous wave (cw)/quasi-cw laser. We investigate two types of tellurite fibers. One type has the constant core diameter, and the other type has a longitudinally varying core diameter. For the fibers with a constant core diameter, when pumped in the anomalous dispersion region, the SC is symmetric in a fiber that has a zero dispersion wavelength close to the pump wavelength. For the fibers with a longitudinally varying diameter, the calculated phase-matching conditions show that they have a broad wavelength range of dispersive waves, and therefore the measured SC spectrum can be broader than one octave. In this work, the fiber lengths are as short as several tens of centimeters, and the pump power is in the watt level.     

Generation of mid-infrared supercontinuum by designing circular photonic crystal fiber

A circular photonic crystal fiber (C-PCF) based on As₂Se₃ is designed, which has three zero dispersion wavelengths and flat dispersion. Using this fiber, a wide mid-infrared supercontinuum (MIR-SC) can be generated by launching a femtosecond pulse in the first anomalous dispersion region. The simulation results show that the MIR-SC is formed by soliton self-frequency shift and direct soliton spectrum tunneling on the long wavelength side and self-phase modulation, soliton fission on the short wavelength side. Further, optical shocking and four-wave mixing (FWM) are not conducive to the long-wavelength extension of MIR-SC, while the number and intensity of fundamental solitons have a greater effect on the short-wavelength extension of MIR-SC. The generation of optical shocking waves, FWM waves and fundamental solitons can be obviously affected by changing the fiber length and input pulse parameters, so that the spectrum range and flatness can be adjusted with great freedom. Finally, under the conditions of 4000 W pulse peak power, 30 fs pulse width, 47 mm fiber length, and 0 initial chirp, a wide MIR-SC with a coverage range of 2.535 μm-16.6 μm is obtained. These numerical results are encouraging because they demonstrate that the spread of MIR-SC towards the red and blue ends can be manipulated by choosing the appropriate incident pulse and designing optimized fiber parameters, which contributes to applications in such diverse areas as spectroscopy, metrology and tomography.     

高非线性光子晶体光纤深紫外超连续谱的研究

光子晶体光纤作为光学非线性良好介质,对超连续谱产生具有重要作用。深紫外超连续谱光源在许多应用中有急切的需求,然而由于实验条件和光纤参数等方面的影响,利用高非线性光子晶体光纤产生深紫外(<280 nm)超连续谱的报道较少。通过理论和实验研究了高非线性光子晶体光纤在深紫外区的频率变换,并分析其产生的物理机理。使用钛宝石飞秒激光器将实验室自制的光子晶体光纤在反常色散区泵浦,研究了不同泵浦功率和泵浦波长对深紫外区超连续谱的影响,结果表明：泵浦波长固定为860 nm时,深紫外频率光谱展宽范围随泵浦功率的增加而逐渐展宽;泵浦功率固定为0.4 W时,泵浦波长的增加不仅展宽超连续谱范围而且极大的提高了深紫外区光谱的转换效率。当泵浦波长为870 nm,泵浦功率为0.4 W,实验所用光子晶体光纤长度为1.45 m,零色散波长为825 nm时,光子与色散波的交叉相位调制使深紫外基模超连续谱扩展到最短波长212 nm。     

Design of solid core photonic bandgap fibers for visible supercontinuum generation

We present a numerical study of two dimensional solid core photonic bandgap fiber design criteria for their particular application to blue/visible supercontinuum generation. By exploiting their strong frequency-dependent dispersion when compared to index guiding micro-structured fibers, we highlight the design of solid core photonic bandgap fibers to fulfill group index matching conditions between the first ejected optical soliton and the trapped dispersive wave generated in the visible wavelength range. We study how these matching conditions depend on the opto-geometrical parameters of the micro-structured cladding, and we use frequency-domain numerical simulations to determine the expected supercontinuum spectral characteristics for selected cases. We investigate design criteria to generate short wavelengths by pumping in such photonic bandgap fibers in different pulse duration regimes and we identify a novel class of short wavelength (blue/visible) supercontinuum generation in the 3rd bandgap of a typical structure by pumping into the 2nd bandgap through a high attenuation spectral region.     

Wideband supercontinuum generation in tapered tellurite microstructured fibers

Enhanced soliton trapping of dispersive waves in a tapered tellurite microstructured fiber pumped by a 1556 nm femtosecond fiber laser is demonstrated. The short wavelength edge of supercontinuum light is extended from 960 to 600 nm after tapering the tellurite microstructured fiber, which is caused by the enhanced soliton trapping of dispersive waves owing to the changing group velocities in tapered fibers. Wide-band supercontinuum light source spanning from 600 to >2400 nm is generated in tapered tellurite micro-structured fibers. Our experimental and simulated results show that short length (several centimeters) zero-dispersion-wave length decreasing highly nonlinear fiber has a potential for generating wideband supercontinuum light source expanding from visible to mid-infrared region.     

Impact of the self-steepening effect on soliton spectral tunneling in PCF with three zero dispersion wavelengths

This work presents a numerical investigation of the self-steepening(SS) effect on the soliton spectral tunneling(SST) effect in a photonic crystal fiber(PCF) with three zero dispersion wavelengths. Interestingly, the spectral range and flatness can be flexibly tuned by adjusting the SS value. When the SS coefficient increases, the energy between solitons and dispersion waves is redistributed, and the red-shifted soliton forms earlier in the region of long wavelength anomalous dispersion. As a consequence, the SST becomes more obvious. The findings of this work provide interesting insights in regard to the impact of the SST effect on tailored supercontinuum generation.     

Experimental investigation of supercontinuum generation in highly nonlinear dispersion-shifted fiber pumped by spectrum-sliced amplified spontaneous emission

Spectral broadening of spectrum-sliced amplified spontaneous emission (SS-ASE) in highly nonlinear, dispersion-shifted fiber in different dispersion regimes is investigated experimentally. We find that, the spectral noise of the amplified SS-ASE pump from Er³⁺-doped fiber amplifier seeds the spectral broadening via four-wave mixing or modulation instability. Stimulated Raman scattering, red-shifted Raman solitons, and blue-shifted dispersion waves all enhance the broadening of the spectrum. The effect of the polarization state of pump on supercontinuum generation is also investigated, and it is found that, linear polarization is more efficient than random polarization for pumping supercontinuum. Supercontinuum with −10 dB bandwidth of 200 nm is generated by launching linearly polarized pump with 33.5 dB m power into anomalous dispersion regime near to zero dispersion wavelength of fiber.     

飞秒激光离焦抽运熔融石英产生超连续白光的实验研究

利用飞秒激光在熔融石英介质中传输产生能量达数毫焦、波长范围覆盖400-900 nm 且光谱分布较为均匀的超连续白光,实验过程中将熔融石英介质离焦放置以避免被击穿. 研究了入射激光能量以及介质离焦距离对超连续白光特性的影响. 结果表明采用高能量的入射激光脉冲离焦抽运介质的方法能够有效避免介质 击穿损伤并提高超连续白光脉冲的能量输出.     

Supercontinuum manipulation based on the influence of chirp on soliton spectral tunneling

The soliton spectral tunneling(SST) effect, as a soliton spectral switching phenomenon, enables a soliton to tunnel through a spectrally limited regime of normal dispersion in the fiber with multiple zero dispersion wavelengths(ZDWs).Since initial chirp can affect the behavior of pulse evolution, we numerically study the influence of chirp on the SST in the process of supercontinuum(SC) occurring in a photonic crystal fiber(PCF) with three ZDWs. The linear chirp is imposed by a phase modulation of input pulse while maintaining a constant pulse duration. Interestingly, it is found that the spectral range and flatness can be flexibly tuned by adjusting the initial chirp value. More specifically, positive chirp facilitates soliton self-frequency shifting(SSFS), making the soliton quickly transfer from one anomalous dispersion regime to another accompanied by the generation of dispersive waves(DWs). In this case, the SST effect further expands the spectral range by enhancing both the red-shift of the fundamental soliton and the blue-shift of DWs, thus generating a broader SC. However, negative chirp suppresses the SST effect, resulting in a smoother SC at the expense of bandwidth.Therefore, the findings in this work provide interesting results relating to the influence of initial chirp on the SST to generate a considerably smoother and broader SC, which is extremely useful in many applications, such as wavelength conversion and SC generation.     

超短激光脉冲在不同色散参量光子晶体光纤中传输的数值模拟

为了使得数值模拟更为精确,采用广义非线性薛定谔方程(GNSE)描述超短激光脉冲在光子晶体光纤中的传输演化过程,并利用二阶分步傅里叶方法通过求解方程,数值计算了相同脉宽和能量的超短脉冲在不同色散参量的光子晶体光纤中非线性传输和超连续谱的产生。比较了超短脉冲在光纤不同色散区传输时,高阶色散和非线性效应对超连续谱的产生以及对脉冲波形演化的影响。结果表明,相对于超短脉冲中心波长位于光子晶体光纤的正常和反常色散区,可以相应获得短波波段和长波波段的超连续谱输出,当超短脉冲中心波长位于零色散波长点时,通过色散和非线性效应的联合作用,更易于产生全波长段的平坦超连续谱。     

高非线性光纤正常色散区产生超连续谱的数值研究

基于广义非线性薛定谔方程,通过数值计算对高非线性光纤正常色散区产生超连续谱进行了研究.结果表明,抽运脉冲的峰值功率、脉冲宽度以及脉冲初始啁啾对该光纤正常色散区超连续谱的形成有极其重要的影响;在高非线性光纤正常色散区产生超连续谱的过程中,三、四阶群速度色散甚至更高阶群速度色散对超连续谱的影响完全可以忽略,但与其他高非线性效应相比,自陡峭效应对超连续谱产生的影响更为明显.高功率超短光脉冲在高非线性光纤正常色散区,得到了没有泵浦成份残余、－20 dB谱宽达400 nm以上而频谱强度起伏小于10 dB的超宽而平坦超连续谱.