系列Sm3+配合物的合成、结构及光物理性能

采用水热方法合成了4种Sm³⁺配合物, 即{[SmZn(2,5-pdc)₂(tp)_0.5(H₂O)]·2H₂O}_n(1), [Sm₂Zn₂(C₆H₅COO)₁₀(Imh)₂(H₂O)₂](2), {[Sm₂(NO₂C₆H₄COO)₆(H₂O)₄]·H₂O}_n(3)和{[SmN(CH₂COO)₃(H₂O)₂]·H₂O}_n(4)[2,5-pdc=2,5-吡啶二羧酸根, tp=对苯二甲酸根, C₆H₅COO=苯甲酸根, Imh=咪唑, NO₂C₆H₄COO=对硝基苯甲酸根, N(CH₂COO)₃=氨三乙酸根]. 通过单晶X射线衍射确定了其晶体结构. 在室温下测定了其红外光谱、 紫外-可见-近红外光谱以及在近红外区和可见区的发射光谱. 结果表明, 4种配合物在近红外区或可见区均出现Sm³⁺离子的特征发射. 这是形成配合物后, Zn-配体部分和配体对Sm³⁺离子发光的敏化作用所致. 此外, 讨论了不同有机配体或d过渡金属离子对Sm³⁺离子发光的影响, 并分析了配合物中Sm³⁺离子的近红外发射带位移、 劈裂和加宽的原因.     

锌(Ⅱ)配合物的超分子设计及对甲醇蒸气的吸附性能

采用饱和蒸气扩散技术, 将2,4-二羟基苯甲醛缩异烟酰腙(H₂dhbi)配体分别与Zn(ClO₄)₂·6H₂O和Zn(NO₃)₂·6H₂O进行配位作用, 得到2种不同配位模式的金属-有机框架材料[(dhbi)₂Zn₂·8H₂O]_n(1)和{[(dhbi)₂(H₂O)₂Zn₂]·4DMF]}_n(2). 利用X射线单晶衍射、 热分析技术(TG-DTA)和X射线粉末衍射(PXRD)等方法进行了结构表征. 进一步将配位聚合物1和2用于对甲醇分子的吸附性能研究, 结果表明, 化合物1是一种理想的微孔材料, 其对甲醇分子的吸附能力为化合物2的近5倍, 采用PLATON对材料的孔隙体积进行计算得到化合物1和2的孔隙率分别为38.2%和5.5%.     

Preparation, properties, and reactions of metal-containing heterocycles: Part CV. Synthesis and structure of polyoxadiphosphaplatinaferrocenophanes

A series of novel heterobimetallic crown ether-like polyoxadiphosphaplatinaferrocenophanes cis-[1,1′-Fc(CH₂O(CH₂CH₂O)_nCH₂CH₂PPh₂)₂]PtCl₂ (n=1–3) (4a–c) was synthesized in good yield by cyclization of the bis(phosphine) ligands 1,1′-Fc(CH₂O(CH₂CH₂O)_nCH₂CH₂PPh₂)₂ (n=1–3) (3a–c) and (PhCN)₂PtCl₂ under high dilution conditions in CH₂Cl₂. The bisphosphines 3a–c are obtained by reaction of the corresponding diols 1,1′-Fc(CH₂O(CH₂CH₂O)_nCH₂CH₂OH)₂ (n=1–3) (1a–c) with: (i) CH₃SO₂Cl in CH₂Cl₂ and (ii) LiPPh₂ in THF. Although the X-ray crystal structure of 4a shows that the cavity is large enough for the encapsulation of small metal cations, inclusion experiments of 4a–c with Group 1 cations, and Mg²⁺, or NH₄⁺ in solution applying NMR titration and cyclovoltammetric methods reveal no evidence for the formation of host–guest complexes for 4a,b. In the case of 4c only the addition of Na⁺ or K⁺ leads to an insignificant effect.     

Synthesis and structural behavior of the P-functional organotin chlorides [Ph2P(CH2)3]2SnCl2, Ph2P(CH2)3SnCl2Me, and Ph2P(CH2)nSnCl3 (n=2, 3)

The P-functional organotin dichloride [Ph₂P(CH₂)₃]₂SnCl₂ (3) is synthesized by reaction of Ph₂P(CH₂)₃MgCl with SnCl₄ independently of the molar ratio of the starting compounds. The corresponding organotin trichlorides Ph₂P(CH₂)_nSnCl₂R (4: n=2, R=Cl; 5: n=3, R=Cl; 6: n=3, R=Me) are formed in a cleavage reaction of Ph₂P(CH₂)_nSnCy₃ (n=2, 3) with SnCl₄ or MeSnCl₃, respectively. The main features of the crystal structures of 3–6 are both intra- and intermolecular PSn coordinations and the existence of intermolecular Sn---ClSn bridges. For further characterization of the title compounds, the adducts 4(Ph₃PO)₂ (7) and 5(Ph₃PO) (8), as well as the P-oxides and P-sulfides of 3–6 (9–15), are synthesized. The results of crystal structure analyses of 7, 11, 12, and 14 are reported. The structures of 9–15 are characterized by intramolecular P=XSn interactions (X=O, S). A first insight into the structural behavior of the compounds 3–15 in solution is discussed on the basis of multinuclear NMR data.     

Molecular motion and phase transition in perovskite-type (CH3)nNH4−nSnCl3 (n=1–4) studied by proton NMR spin–lattice relaxation

Powder X-ray diffraction, ¹¹⁹Sn NMR spectra, and ¹H NMR spin–lattice relaxation times, T₁, were measured for (CH₃)_nNH_4−nSnCl₃ (n=1–4). From the Rietveld analysis, it is shown that all four compounds crystallize into deformed perovskite-type structures at room temperature. The temperature dependence of ¹H T₁ was analyzed in terms of the CH₃ reorientation and other motions of the whole cation. Except for the phase transition in CH₃NH₃SnCl₃, which is from monoclinic to rhombohedral at 331 K, ¹H T₁ was continuously changed at other phase transitions in this compound as well as in the n=2–4 compounds, suggesting that the transitions are not caused by the change of the motional state of the cation but by an instability of the [SnCl₃]_nⁿ⁻ perovskite lattice.     

新型氯桥连一维链结构Cd(Ⅱ)配位聚合物的合成、 结构及蓝光性能

利用2-乙酰基吡啶(acpy) 和2-邻甲基苯胺在甲醇中回流反应得到新型希夫碱配体2-{1-[(2-甲基苯基) 亚氨基]-乙基}吡啶)(mpep) , 通过溶剂热法将acpy和mpep与氯化镉反应得到2种新型氯桥连一维之字链结构Cd(Ⅱ) 配位聚合物{[Cd(mpep) ]Cl₂}_n(配合物1)和{[Cd(acpy) ]Cl₂}_n(配合物2). 利用单晶X射线衍射、 核磁共振氢谱、 元素分析和红外光谱对配合物1和配合物2进行结构表征. 结果表明, 配合物1和配合物2均为一维之字链状结构. 在配合物1中, Cd与mpep配体中2个氮原子和4个氯原子配位, 呈六配位顺式八面体构型, 并通过2个Cl原子桥连形成一维之字链状结构. 在配合物2中, 中心金属Cd(Ⅱ) 与acpy中的氮原子、 氧原子和4个氯原子配位, 也呈六配位顺式八面体构型, 进一步通过Cl原子桥连相邻金属形成一维之字链状结构. 在3种不同极性的溶剂(CH₃OH, CH₃CN和 CH₂Cl₂)中, 两种配位聚合物均呈现蓝色荧光(390~433 nm) , 说明2种配位聚合物具有弱溶剂效应; 在固态室温下两种配位聚合物也呈现蓝色荧光, 最大发射波长分别为440和473 nm. 固态最大发射波长比溶液中红移的原因是分子中存在氢键, 降低了基态与激发态之间的能级差. 在室温下, 配合物1和配合物2在3种溶液和固态中均显示出较长的荧光寿命(19.08~60.20 μs) .     

双(2,4-二甲基戊二烯基)氯化钆的合成及晶体结构

合成双(2,4-二甲基戊二烯基)氯化钆{[2,4-(CH₃)₂C₅H₅]₂GD_cl}₂,并测定了晶体结构.晶体为单斜晶系,P2₁/n空间群.晶胞参数a=0.89141(18)nm,b=1.4486(3)nm,c=1.15925(15)nm,β=92.996(18)°,V=1.4949(4)nm³,Z=3.     

Synthesis and structure of two lanthanide complexes with isonicotinic acid N-oxide (HL): [Ln(L)2(H2O)4]n·(NO3)n·n(H2O) (Ln = Sm or Tb)

Two new lanthanide complexes of isonicotinic acid N-oxide (HL), namely [Ln(L)₂(H₂O)₄]_n·(NO₃)_n·n(H₂O) for Ln = Sm or Tb, have been synthesized and characterized by spectroscopic and crystallographic methods. IR spectra suggest that isonicotinic acid N-oxide acts as a O,O′-bidentate ligand, the N-oxide group as well as the nitrate group are not involved in coordination. Single crystal analyses have shown that both complexes are isomorphous, where the Ln(III) centers are eight coordinated by four O atoms of four water ligands and other four O atoms of two isonicotinic acid N-oxide ligands. The carboxylate groups are only involved in the bidentate syn–syn bridging mode into infinite chains. Hydrogen bonds between aqua ligands, lattice molecules, nitrate and N-oxide groups are formed giving a three-dimensional network.     

新型双苯并环己酮芳亚胺镍(Ⅱ)催化降冰片烯与甲基丙烯酸丁酯共聚合

采用自制的新型双苯并环己酮芳亚胺镍催化剂双苯并环己酮-2,6-二甲基苯亚胺镍(Ⅱ)(Ni{C₁₀H₈(O)C[2,6-C₆H₃(CH₃)₂N]CH₃}₂, C1)和双苯并环己酮-2,6-二氯苯亚胺镍(Ⅱ)(Ni{C₁₀H₈(O)C[2,6-C₆H₃Cl₂N]CH₃}₂, C2)与三五氟苯硼[B(C₆F₅)₃]结合, 在一定的反应条件下可高效催化降冰片烯(NB)与甲基丙烯酸正丁酯(n-BMA)的乙烯基加成共聚合. 提出了催化聚合时存在的可能失活机理; 研究了不同单体投料比对催化活性、 产率及产物性能的影响. 根据Kelen-Tüdõs方法分别估算出2种单体在不同催化体系下的竞聚率, 即当催化体系为C1/B(C₆F₅)₃时, 竞聚率r_n-BMA=0.02, r_NB=16.28, r_NB·r_n-BMA=0.32; 当催化体系为C2/B(C₆F₅)₃时, r_n-BMA=0.01, r_NB=64.83, r_NB·r_n-BMA=0.65. 结果表明, 2种单体在2种体系催化下均为无规共聚合.     

具有螺旋结构的金属镍有机-无机配位聚合物的合成及表征

在水热体系中合成了3个中心金属为镍离子, 以六配位扭曲八面体构型形成的具有螺旋结构的配位聚合物{[Ni₂L₂(bib)₂·2H₂O]·5H₂O}_n(1), [Ni₂L₂(bpy)]_n(2)和{[Ni₂L₂(bibpip)₂·2H₂O]·6H₂O}_n(3)[H₂L=4,4'-三苯胺二甲酸; bib=1,3-二(咪唑基)苯; bpy=4,4-联吡啶; bibpip=1,4-二(4-咪唑苄基)哌嗪]. 通过单晶及粉末X射线衍射、 红外光谱、 元素分析和热重分析对这3种化合物进行了表征. 结果表明, 化合物1属于单斜晶系, C2/c空间群, 其骨架为具有{4²·6⁵·8}拓扑结构的二维层结构; 化合物2属于斜方晶系, Fdd2空间群, 其骨架为具有{4⁸·5⁴·6³}拓扑结构的三维超分子网络; 化合物3属于三斜晶系, P\begin{array}{c}\bar{1}\end{array}空间群, 为1个五重穿插的三维超分子网络, 其骨架具有{4⁴·6²}拓扑结构.     

Length dependence of coherent electron transportation in metal–alkanedithiol–metal and metal–alkanemonothiol–metal junctions

We have applied the elastic-scattering Green’s function theory to study the coherent electron transportation processes in both metal–alkanedithiol–metal (gold–[S(CH₂)_nS]–gold, n = 8–14) and metal–alkanemonothiol–metal (gold–[H(CH₂)_nS]–gold, n = 8–14) at the hybrid density functional theory level. It is shown that the current decreases exponentially with the molecular length. At the low temperature limit the electron decay rate, β, for alkanedithiol junction is found to be around 0.30/CH₂ at 1.0 V bias, much smaller than the calculated value of 0.60/CH₂ for alkanemonothiol junction. The decay rate for alkanedithiol junction at the room temperature is neither sensitive to the activation of the Au–S stretching vibrational mode nor to the external bias. The calculated current–voltage characteristics and decay rates for both junctions are in excellent agreement with the corresponding experimental results.     

Macrocyclic gold(I) complexes and [2]catenanes containing carbonyl functionalized diacetylide ligands

The carbonyl derivatized bis(alkyne) O=C(4-C₆H₄OCH₂CCH)₂ was converted into the imine derivatives RN=C(4-C₆H₄OCH₂CCH)₂ [R=OH, NHC(O)NH₂, NHC₆H₃-2,4-(NO₂)₂] and into the 4-bromomethyl-1,3-dioxolane derivative BrCH₂C₂H₃O₂C(4-C₆H₄OCH₂CCH)₂. The alkyne units in these compounds react with [AuCl(SMe₂)] in the presence of base to form the corresponding digold(I) diacetylide complexes, that exist as insoluble oligomers or polymers. They reacted with the diphosphines Ph₂PZPPh₂ [Z=CC, trans-HC=CH and (CH₂)_n, n=3–5] to give macrocyclic gold(I) complexes of the type [Au₂(μ-LL)(μ-PP)], where LL is the diacetylide and PP the diphosphine ligand. The ability of these macrocyclic complexes to self-assemble to [2]catenanes has been studied. The ketone and imine derivatives do not form [2]catenanes because the orientation of the aryl groups is unfavorable, but the 1,3-dioxolane derivatives may catenate if the ring size is optimum.     

Study of the reaction of 1,1-bis(trimethylsilyl)-2-phenylethylene with some acyl chlorides in the presence of AlCl3

1,1-Bis(trimethylsilyl)-2-phenylethylene (1), which has been synthesized from the Peterson reaction between (Me₃Si)₃CLi and benzaldehyde, reacts with various acyl chlorides (RCOCl, R = Me, Et, iso-Pr, n-Bu, iso-Bu, iso-C₅H₁₁, PhCH₂, PhCH₂CH₂) in the presence of AlCl₃ to give -silyl-,β-unsaturated enones 3a–3h with high E stereoselectivity along with trans-,β-unsaturated ketones 4a–4h. The enones 3 can be partially converted into the ketones 4 with an excess of AlCl₃. Reaction of 1 with RCOCl, (R = Ph, CH₃CH=CH) afforded only the ketones 4. Yields were dependent on time and the amounts of AlCl₃ used.     

Crystalline calcium phenylphosphonate—thermodynamic data on n-alkylmonoamine intercalations

Lamellar crystalline calcium phenylphosphonate, as anhydrous Ca(HO₃PC₆H₅)₂ and hydrated Ca(HO₃PC₆H₅)₂·2H₂O compounds, were used as hosts for intercalation of polar n-alkylmonoamine molecules of the general formula CH₃(CH₂)_nNH₂ (n=0–4, 7) in water or 1,2-dichloroethane. An increase in the interlayer distance was observed. The exothermic enthalpic values for intercalation increased with the number of carbon atoms and with increasing concentration of the amines. The intercalation followed by a titration procedure in the solid/liquid interface with Ca(HO₃PC₆H₅)₂·2H₂O and Ca(HO₃PC₆H₅)₂ gave the enthalpy/number of carbons correlations: Δ_intH=−(1.74±0.43)–(1.30±0.13)n_c and Δ_intH=−(4.15±0.15)–(1.07±0.03)n_c, for water and 1,2-dichloroethane, respectively. A similar correlation Δ_intH=−(4.27±0.80)–(1.85±0.21)n_c was obtained in water by using the ampoule breaking procedure for Ca(HO₃PC₆H₅)₂·2H₂O. The increase in exothermic enthalpic values with the increase in n-aliphatic carbon atoms is more pronounced for the anhydrous compound and also when using the ampoule breaking procedure. The Gibbs free energies are negative. Positive entropic values favor intercalation in these systems.     

The effect of terminal chain modifications on the mesomorphic properties of 4,4'-disubstituted diphenyldiacetylenes

A variety of terminal chain modifications (Y) were made on the diacetylenes in which X=C_nH_2n+1, C₁₂H₂₅O and F, and Y=CH₂CH(Me)C₂H₅, COCH₃, C≡CC₅H₁₁, C_nF_2n+1C_nH_2n+1 and CH=CHCO₂C₃H₇. Mesomorphic properties were determined by hot stage polarizing microscopy and DSC. These were compared with those for the dialkyl analogues (X=C_mH_2m+1, Y=C_nH_2n+1) and a series of 1- and 2-olefins (Y=CH=CHC_nH_2n+1 and CH₂CH=CHC_nH_2n+1). The 1-olefin series showed wider range nematics than the dialkyl compounds, whereas the above modifications showed either narrow range nematic phases, no mesophase or higher melting temperatures. New transition temperature and enthalpy data are provided for some of the dialkyl and F-alkyl compounds previously reported, for comparisons. Preliminary birefringence data are also included along with the results of some heat and UV stability studies.     

Theoretical study on the intramolecular proton transfer reactions of 3-methyl-5-hydroxyisoxazole and its water complexes

The optimized structures and proton transfer reactions of 3-methyl-5-hydroxyisoxazole and its water complexes (3-M-5-HIO · (H₂O)_n · (n = 0–3)) were computed at B3LYP and MP2 theoretical level. The results indicates that 3-M-5-HIO has four isomers (Ecis, Etrans, K1 and K2), and the keto tautomer, and K2 is the most stable isomer in the gas phase. Hydrogen bonding between 3-M-5-HIO and the water molecules can dramatically lower the barrier by the concerted transfer mechanism. Ecis · (H₂O)₃ → K1 · (H₂O)₃ and Ecis · (H₂O)₂ → K2 · (H₂O)₂ is found to be very efficient. Comparing with the proton transfer mechanism of 5-HIO shows that the methyl substitution prevents the intramolecular proton transfer.     

Synthesis and chemistry of the bis(trimethylsilyl)amido bis-tetrahydrofuranates of the group 2 metals magnesium, calcium, strontium and barium. X-ray crystal structures of Mg[N(SiMe3)2]2·2THF and related Mn[N(SiMe3)2]2·2THF

Transamination reactions utilizing the compound mercuric bis(trimethylsilyl)amide, Hg{N(SiMe₃)₂}₂, in tetrahydrofuran (THF), and the metals Na, Mg, Ca, Sr, Ba and Al have been investigated. Thus the THF solvated compounds Na[N(SiMe₃)₂]·THF and M[N(SiMe₃)₂]₂·2THF, M = Mg, Ca, Sr and Ba (1–4), have been prepared. The X-ray crystal structures of 1 and the related manganese compound Mn[N(SiMe₃)₂]₂·2THF (5) are reported. Interaction of the silylamides, 2–4, with a range of crown ethers apparently proceeded with elimination of silylamine, (Me₃Si)₂NH, and novel ring opening of the crown ethers, generating species containing a donor alkoxide ligand with a vinyl ether function, presumably, ---O(CH₂CH₂O)_nCH=CH₂ (n = 3−5). The silylamides 2–4 were also cleanly converted to the corresponding alkoxides (from ¹H NMR data) in reactions with stoichiometric quantities of 3-ethyl-3-pentanol.     

Synthesis, structure and spectroscopic study of Rh polypyridine complexes with phenylcyanamide derivative ligands

Several new Rh^III complexes, [Rh(tpy)(bpy)L](PF₆)₂ (tpy=2,2′:6′,2″-terpyridine, bpy=2,2′-bipyridine, and L=monoanions of phenylcyanamide(pcyd)), 4-methylphenylcyanamide (4-MePcyd), 2,4-dimethylphenylcyanamide (2,4-Me₂pcyd), 4-methoxyphenylcyanamide (4-MeOPcyd), 2-chlorophenylcyanamide (2-Clpcyd) and 2,5-dichlorophenylcyanamide (2,5-Cl₂pcyd) have been synthesized and characterized by elemental analysis, IR, ¹H NMR and electronic absorption spectroscopies. ORTEP drawing of [Rh(tpy)(bpy)(2,5-Cl₂pcyd)](PF₆)₂·1/2CH₃CN shows three pyridyl rings of the tpy ligand that are nearly coplanar, as are the two rings of bpy. The anionic cyanamide group is coordinated end-on by the nitrile nitrogen to the Rh^III. The Rh^III–NCN bond is bent, having an angle of 125.4°. This bent bond is largely determined by the σ-bonding interaction of a cyanamide non-bonding electron pair in a sp² hybrid orbital.     

ansa-Metallocene derivatives XXXIII. 2-Dimethylamino-substituted bis-indenyl zirconium dichloride complexes with and without a dimethylsilyl bridge: syntheses, crystal structures and properties in propene polymerization catalysis

Bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (2-(CH₃)₂N-C₉H₆)₂ZrCl₂, and dimethylsilyl-bridged bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂, were prepared by reaction of the corresponding ligand lithium salts with ZrCl₄ in toluene. Diffractometric structure determinations reveal C₂-symmetric complex geometries for both complexes. An increased electron density at the Zr center of the dimethylamino-substituted complexes is indicated by reduction potentials which are 0.3–0.4 V more negative than those of their unsubstituted analogs. When activated with methyl aluminoxane in toluene solution, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂ catalyzes the polymerization of propene to polymers with a microstructure comparable with that of polymers produced with other Me₂Si-bridged bis(indenyl)ZrCl₂ complexes, but with a substantially increased fraction of i-propyl end groups derived from alkyl exchange between Zr-polymer and Al---Me species.     

Steric effects of the 2-(diphenylphosphino)pyridine bridging ligand in the synthesis of binuclear palladium(II) complexes

Treatment of [Pd{CH₂C(CH₃)CH₂}(Ph₂PPy)Cl] (Ph₂PPy = 2-(diphenylphosphino)pyridine) with cis-[Pd(^tBuNC)₂Cl₂] in dichloromethane affords the mixed isocyanide-tertiary phosphine complex cis-[Pd(^tBuNC)Ph₂PPy)Cl₂], in which the Ph₂PPy is a monodentate P-donor, and [{Pd[CH₂C(CH₃)CH₂]Cl}₂]. The steric effects of the Ph₂PPy bridging ligand in determining the reaction course is discussed. The complex cis-[Pd(^tBuNC)(Ph₂PPy)Cl₂] was crystallographically characterized: P2₁/n, a = 15.143(2), b = 9.527(1), c = 17.517(4) Å, β = 113.96(1)°, V= 2309.4(7) ų, Z = 4. The final R value was 0.044, R^w= 0.046 for the 3078 reflections with I > 3σ(I).