Superparamagnetic-like behavior and spin-orbit coupling in (Co,Zn)RE4W3O16 tungstates (RE=Nd, Sm, Eu, Gd, Dy and Ho)

Magnetic susceptibility measurements carried out on (Co,Zn)RE₄W₃O₁₆ compounds revealed a disordered state of magnetic moments above 4.2 K for all compounds under study, and a weak response to magnetic field and temperature for ZnSm₄W₃O₁₆ and ZnEu₄W₃O₁₆ samples. The temperature independent component of magnetic susceptibility has a negative value for ZnGd₄W₃O₁₆ and a positive one for the rest of the tungstates, indicating a domination of van Vleck contribution. The magnetization isotherms of majority of the tungstates under study revealed both spontaneous magnetic moments and hysteresis characteristic for the superparamagnetic-like behavior with blocking temperature T_B∼30 K, except for ZnEu₄W₃O₁₆. Fitting procedure of the Landé factor revealed that the stronger the orbital contribution, the weaker the superparamagnetic effect, namely for ZnRE₄W₃O₁₆. In case of CoRE₄W₃O₁₆ a significant participation of the Co²⁺ moment in the spontaneous magnetization was observed.     

Phase stability in the LnCa2Mn2O7 (Ln=Pr, Nd, Sm and Gd) Ruddlesden-Popper series

The synthesis of the Ruddlesden-Popper series, LnCa₂Mn₂O₇, (Ln=Pr, Nd, Sm and Gd) is described and their structure and electronic properties investigated. The reduction in size of the A-site cation causes an increase in the distortion of their orthorhombic structures (space group Cmcm). All of these compounds form with a perovskite impurity, the amount of which increases on reduction of the cation size. The synthesis temperature also alters the amount of perovskite impurity in the phase, but only to a lower limit, implying the perovskite phase is intrinsic to the material and that a phase equilibrium exists between the layered Ruddlesden-Popper and perovskite phases, which is controlled by the cation size. The magnetic susceptibility show transitions characteristic of the perovskite phase, therefore little direct information can be obtained about the Ruddlesden-Popper phases, except that ferromagnetism is not observed in any of these materials.     

Adiabatic small polaron-hopping conduction in Ln0.85Ca0.15MnO3 (Ln=Nd, Pr and Sm) perovskites

Polycrystalline bulk ferromagnetic insulating (FMI) Ln_0.85Ca_0.15MnO₃ (Ln=Nd, Pr and Sm) samples are prepared by standard solid-state reaction route and characterized. Powder X-ray diffraction (XRD) data of the manganites show single-phase character. Existing theoretical models predict that the high temperature (T>θ_D/2, θ_D being the Debye temperature) dc conductivity (σ_dc) of these samples is due to adiabatic small polaron-hopping conduction. Greaves’ and Mott's variable range hopping (VRH) conduction mechanisms are not suitable to explain the σ_dc data at low temperature (T<θ_D/2).     

First-principles study on the crystal, electronic structure and mechanical properties of hexagonal Al3RE (RE = La, Ce, Pr, Nd, Sm, Gd) intermetallic compounds

The structural properties, elastic properties and electronic structures of hexagonal Al₃RE intermetallic compounds are calculated by using first-principles calculations based on density functional theory. Since there exists strong on-site Coulomb repulsion between the highly localized 4f electrons of RE atoms, we present a combination of the GGA and the LSDA+U approaches in order to obtain the appropriate results. The GGA calculated lattice constants for the hexagonal Al₃RE intermetallic compounds are in good agreement with available experimental values. The results of cohesive energy indicate that these compounds can be stable under absolute zero Kelvin and the stability of Al₃Gd is the strongest in all of the hexagonal Al₃RE compounds. The densities of states for GGA and LSDA+U approaches are also obtained for the Al₃RE intermetallic compounds. The mechanical properties are calculated from the GGA method in this paper. According to the computed single crystal elastic constants, Al₃La, Al₃Sm and Al₃Gd are mechanically unstable, while Al₃Ce, Al₃Pr and Al₃Nd are stable. The polycrystalline elastic modulus and Poisson’s ratio have been deduced by using Voigt-Reuss-Hill (VRH) approximations, and the calculated ratio of bulk modulus to shear modulus indicates that Al₃La compound is ductile material, but Al₃Ce, Al₃Pr, Al₃Nd, Al₃Sm and Al₃Gd are brittle materials.     

Synthesis,photophysical properties,and photocatalytic applications of Bi doped NaTaO3 and Bi doped Na2Ta2O6 nanoparticles

Phase formation and photophysical properties of bismuth doped sodium tantalum oxide (perovskite, defect pyrochlore) nanoparticles prepared by a hydrothermal method were studied in detail. It was revealed that the synthesis conditions like NaOH concentration and bismuth precursor (NaBiO₃·2H₂O) markedly affect the crystal structure of sodium tantalum oxide. At low NaOH concentration and high bismuth precursor (NaBiO₃·2H₂O) content, Bi doped Na₂Ta₂O₆ (defect pyrochlore) phase was predominantly formed, while at higher NaOH concentration, Bi doped NaTaO₃ (perovskite) phase was formed. It was observed that the defect pyrochlore (Bi doped Na₂Ta₂O₆) phase was formed and stabilized by the presence of dopant precursor (NaBiO₃·2H₂O). The chemical analysis of the samples confirmed the doping of Bi³⁺ cations in both phases. Doping of bismuth enabled visible light absorption up to 500 nm in perovskite and defect pyrochlore type sodium tantalum oxide. Bi doped NaTaO₃ samples showed better performance for the photocatalytic degradation of rhodamine B than that of Bi doped Na₂Ta₂O₆, under visible light irritation (λ>420 nm). The present results shed light on phase formation of sodium tantalate and these results are useful in understanding properties of NaTaO₃ based compounds, synthesized by the hydrothermal method.     

Aqueous synthesis and enhanced photocatalytic activity of ZnO/Fe2O3 heterostructures

We report a facile synthesis of ZnO/Fe₂O₃ heterostructures based on the hydrolysis of FeCl₃ in the presence of ZnO nanoparticles. The material structure, composition, and its optical properties have been examined by means of transmission electron microscopy, scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and diffuse reflectance UV–visible spectroscopy. Results obtained show that 2.9 nm-sized Fe₂O₃ nanoparticles produced assemble with ZnO to form ZnO/Fe₂O₃ heterostructures. We have evaluated the photodegradation performances of ZnO/Fe₂O₃ materials using salicylic acid under UV-light. ZnO/Fe₂O₃ heterostructures exhibited enhanced photocatalytic capabilities than commercial ZnO due to the effective electron/hole separation at the interfaces of ZnO/Fe₂O₃ allowing the enhanced hydroxyl and superoxide radicals production from the heterostructure.     

Synthesis and luminescence properties of lead-halide based organic–inorganic layered perovskite compounds (CnH2n+1NH3)2PbI4 (n=4, 5, 7, 8 and 9)

This paper describes the synthesis and characterization of organic–inorganic layered perovskite compounds, (C_nH_2n+1NH₃)₂PbI₄ (n=4, 5, 7, 8 and 9). The effect of the number of carbon atoms on luminescence properties has been examined. Thin films of microcrystalline (C_nH_2n+1NH₃)₂PbI₄ fabricated by spin-coating are highly oriented, with the c-axis perpendicular to the substrate surface. Temperature-dependent optical absorption spectra reveal that (C_nH_2n+1NH₃)₂PbI₄ films (n=4, 7, 8 and 9) show the structural phase transitions. The excitonic structures of (C_nH_2n+1NH₃)₂PbI₄ vary with the number of carbon atoms of the alkyl chain length. At low temperatures below 100 K, the lowest-energy free-exciton band of (C_nH_2n+1NH₃)₂PbI₄ (n=7, 8 and 9) split into three fine-structure levels. In contrast to (C_nH_2n+1NH₃)₂PbBr₄ films, (C_nH_2n+1NH₃)₂PbI₄ (n=7, 8 and 9) shows no triplet exciton emission, but it shows the Stokes-shifted emission from bound excitons.     

The effect of the Bi source on optical properties of Bi2Te3 nanostructures

nanostructures were synthesized by using different Bi sources via a simple solvothermal process, in which and BiCl₃ were used as the Bi sources. Optical properties of nanostructures prepared with and BiCl₃ as the Bi sources were investigated by micro-Raman spectroscopy. The Raman scattering spectrum of hexagonal nanoplates prepared by using as the Bi source shows that the infrared (IR) active mode A_1u, which must be odd parity and is Raman forbidden for bulk crystal due to its inversion symmetry, is greatly activated and shows up clearly in the Raman scattering spectrum. We attribute the appearance of the infrared active A_1u mode in the Raman spectrum to crystal symmetry breaking of hexagonal nanoplates. However, the Raman scattering spectrum of nanostructures with irregular shape prepared by using as the Bi source only exhibits the two characteristic Raman modes of crystals. Micro-Raman measurements on nanostructures with different morphologies offer us a potential way to tailor optical properties of nanostructures by controlling the morphologies of the nanostructures, which is very important for practical applications of nanostructures in thermoelectric devices.     

Electronic and magnetic properties of layered LnFePO (Ln=La and Ce)

Effects of the replacement of La with Ce on the electronic and magnetic properties of a layered superconductor LaFePO (T_c=∼5 K) were studied. Polycrystalline samples of CeFePO, prepared by a solid-state reaction, showed metallic conduction down to 2 K without exhibiting superconducting transition, although the resistivity decreased largely at temperatures below 30 K. Further, they showed an apparent positive magnetoresistance (MR) below ∼2 K, superposed on a negative MR. Temperature dependence of magnetic susceptibility is decomposed to a temperature-sensitive Curie-Weiss component presumably due to the Ce³⁺ ions with a magnetic moment of 1.98μ_B and a less temperature-sensitive component attributable to itinerant electrons. The magnetic interaction between Ce³⁺ ions and itinerant electrons in CeFePO likely suppresses the superconducting transition observed in LaFePO.     

Low temperature synthesis and characterization of rare earth orthoferrites LnFeO3 (Ln=La, Pr and Nd) from molten NaOH flux

Rare earth orthoferrites of the general formula LnFeO₃ (Ln=La, Pr and Nd) phases have been synthesized for the first time in molten NaOH flux at a temperature as low as 400 ^°C. The flux-grown oxides were characterized by XRD, SEM, EDX, FT-IR and temperature dependent electrical resistivity measurements. The crystal structures of these materials have been refined by the Rietveld profile analysis method using powder XRD data. All these oxides crystallize in the orthorhombic structure (space group Pbnm, no. 62) and exhibit insulating behavior. As-synthesized samples show three active IR absorption bands for Fe-O stretching vibration (ν₁ mode) and O-Fe-O deformation vibration (ν₂ mode). In the KOH flux on the other hand, no product formation is observed, thus providing evidence for the differences in the two alkali fluxes.     

Molecular materials derived from MPc (M=Fe, Pb, Co) and 1,8-dihydroxiantraquinone thin films: Formation, electrical and optical properties

Semiconductor-like thin films were grown using metallic phthalocyanines (MPc) (M=Fe, Pb, Co) and 1,8 dihydroxiantraquinone as initial compounds. The morphology of the deposited films was studied by using scanning electron microscopy and atomic force microscopy. The powder and thin-film samples of the synthesized materials, deposited by vacuum thermal evaporation, showed the same intra-molecular bonds as in IR spectroscopy studies, which suggests that the evaporation process does not alter these bonds. The optical band gap values of C₆₀H₂₈N₈O₈Fe, C₆₀H₂₈N₈O₈Pb and C₆₀H₂₈N₈O₈Co calculated from the absorption coefficient were found to be 1.60, 1.89 and 1.75 eV, respectively, arising from non-direct transitions. The effect of temperature on conductivity was also measured in these samples. It was found that the temperature-dependent electric current in all cases showed a semiconductor behavior with conductivities in the order of 10⁻⁶ Ω⁻¹ cm⁻¹ where the highest value corresponded to the cobalt material. The linear dependence observed in the films implies only one type of conduction mechanism in all cases, with mean activation energies of the order of 1.55, 1.77 and 1.50 eV for iron, lead and cobalt-based thin films, respectively.     

Structural deformation monitored by vibrational properties and orbital modeling in (Pb,Sm)TiO3 systems

Pb_1−xSm_xTiO₃ (PST) powders with x varying from 0 to 0.1 were obtained by the polymeric precursor method, a soft chemical route. The vibrational properties relating tetragonal to pseudo-cubic phase transition were studied by Raman spectroscopy. The results obtained showed that the phase transition is extremely dependent upon the samarium content and presents a diffuse behavior. Monitoring of the oxygen 2p and titanium 3d orbitals was performed by the periodic mechanical quantum method, revealing the changes that occur with the distribution and contribution of the hybrid orbitals due to the samarium influence.     

Optical properties of the filled tetrahedral semiconductors LiZnX (X=N, P, and As)

We present first principles calculations of the electronic and the optical properties of the filled tetrahedral compounds LiZnN, LiZnP, and LiZnAs performed with the full potential linearized augmented plane wave method within the local density approximation. The origin of the small gap of LiZnN is attributed to the strong p-d coupling in this compound. The assignments of the structures in the optical spectra and band structure transitions are discussed in detail. The predicted values of the dielectric constants for LiZnP and LiZnAs are close to those of the binary compounds GaP and GaAs, respectively.     

Biomolecule-assisted hydrothermal synthesis of Sb2S3 and Bi2S3 nanocrystals and their elevated-temperature oxidation behavior for conversion into α-Sb2O4 and Bi2O3

We have developed a novel biomolecule-assisted hydrothermal method to prepare Sb₂S₃ and Bi₂S₃ nanocrystals with various sizes and shapes, in which cysteine combined with other sulfur source can exert the synergistic effect on products. The samples were characterized XRPD, TEM, HRTEM, FESEM, and PL techniques. First, we prepared a series of Sb₂S₃ and Bi₂S₃ nanocrystals by simply adjusting the composition of sulfur sources under hydrothermal conditions. Then, we studied the elevated-temperature oxidation behavior of these sulfides in air, which can lead to the formation of α-Sb₂O₄ and Bi₂O₃ samples at 600 °C for 3 h. The optical properties of the α-Sb₂O₄ and Bi₂O₃ samples were also discussed.     

Phase- and shape-controlled synthesis of cadmium hydroxyl chloride microstructures via an ammonia-assisted conversion of 1D CdQCl (Q=quinoline) complex microwires

In this paper we reported a NH₃·H₂O-assisted solvothermal route for successful synthesis of cadmium hydroxyl chlorides (Cd_x(OH)_yCl_z) microstructures with different phases and shapes, employing 1D CdQCl (Q=quinoline) complex microwires as the precursor. Experiments contained two processes: firstly, CdQCl complex microwires with 500–600 nm in diameter and several hundreds of micrometers in length were prepared by the complexation between CdCl₂·2.5H₂O and quinoline at room temperature; then, CdQCl microwires were solvothermally treated at 150 °C for 10 h in the presences of different amounts of NH₃·H₂O to produce Cd_x(OH)_yCl_z microstructures with various phases and shapes. The as-obtained precursor and Cd_x(OH)_yCl_z microstructures were characterized by scanning electron microscopy, transmission electron microscopy, Infrared spectrometry and X-ray powder diffraction. Experiments showed that hexagonal Cd(OH)Cl was obtained from water–methanol system, while rhombohedral Cd₄(OH)₅Cl₃ from methanol system. Also, it was found that the shapes of Cd_x(OH)_yCl_z could be tuned by the amounts of NH₃·H₂O. Furthermore, the UV diffuse reflection and photoluminescence spectra of the precursor and Cd_x(OH)_yCl_z were also investigated.     

Dielectric and optical properties of Ln0.8Lu0.2TiNbO6 (Ln = Ce,Pr, Nd & Sm) ceramics

Ln_0.8Lu_0.2TiNbO₆ (Ln = Ce, Pr, Nd & Sm) are synthesized through conventional solid state ceramic route. The XRD, FT Raman and FT IR studies revealed that the samples have aeschynite orthorhombic symmetry. The samples are sintered at 1230 ^∘C. Using SEM technique, microstructure of the sintered samples is analyzed. The dielectric properties of all the samples in the radio as well as microwave frequencies are studied. UV spectra of the samples are recorded and the optical band gap is estimated from the Tauc's plots. The samples are found to be photoluminescent materials with emissions at violet and green regions.     

Fabrication, study of optical properties and structure of most stable (CdP2)n nanoclusters

CdP₂ nanoclusters were fabricated by incorporation into pores of zeolite Na–X and by laser ablation. Absorption and photoluminescence (PL) spectra of CdP₂ nanoclusters in zeolite were measured at the temperatures of 4.2, 77 and 293 K. Both absorption and PL spectra consist of two bands blue shifted with respect to bulk crystal. We performed the calculations aimed to find the most stable clusters in the size region up to size of the zeolite Na–X supercage. The most stable clusters are (CdP₂)₆ and (CdP₂)₈ with binding energies of 9.30 and 10.10 eV per (CdP₂)₁ formula unit, respectively. Therefore, we attributed two bands observed in absorption and PL spectra to these stable clusters. The Raman spectrum of CdP₂ clusters in zeolite was explained to be originated from (CdP₂)₆ and (CdP₂)₈ clusters as well. The PL spectrum of CdP₂ clusters produced by laser ablation consists of the asymmetric band with low-energy tail that has been attributed to emission of both (CdP₂)₈ cluster and CdP₂ microcrystals.     

Some crystallography,chemistry, physics,and thermodynamics of B12O2, B12P2, B12As2, and related alpha-boron type crystals

This paper shows that several alpha-boron type compounds may be useful as high-temperature semiconductors with decent carrier motilities, high electrical resistivity, good optical transparency, good stability under high radiation bombardment, and possess high neutron capture cross-sections. The most promising are B₁₂O₂, B₁₂P₂, and B₁₂As₂. Their relationship to alpha-boron, B₁₃C₂, and other derivative crystals is explained. A study of their chemical and thermodynamic properties indicates how single crystals useful for electronic devices can be grown.     

Synthesis and fluorescence properties of pure and metal-doped spherical ZnS particles from EDTA-metal complexes

Monodispersed spherical ZnS particles as well as doped with Cu, Mn ions were synthesized from metal-chelate solutions of ethylenediamine tetraacetate (EDTA) and thioacetamide (TAA). The characterizations of the ZnS-based particles were investigated via TEM, SEM, XRD, TG/DTA and PL measurements. The sphere size was controlled from 50 nm to 1 μm by adjusting the nucleation temperatures and molar ratio of Zn-EDTA to TAA. The emission intensity continuously increased with the increase of the particle size. When the ZnS microspheres were annealed at 550-800 °C, there were two specific emission bands with the centers at 454 nm and 510 nm, which were associated with the trapped luminescence arising from the surface states and the stoichiometric vacancies, respectively. When Cu²⁺ was introduced into ZnS microspheres, the dominant emission was red-shifted from 454 to 508 nm, fluorescence intensity also sharply increased. However, for the Mn²⁺-doped ZnS, the emission intensity was significantly enhanced without the shift of emission site.