Anti-plane analysis on a finite crack in a one-dimensional hexagonal quasicrystal strip

The anti-plane fracture problem for a finite crack in a one-dimensional hexagonal quasicrystal strip is analyzed. By using Fourier transforms, the mixed boundary value problems are reduced to the dual integral equations. The solution of the dual integral equations is then expressed by the complete elliptic integrals of the first and the third kinds. The expressions for stress, strains, displacements and field intensity factors of the phonon and phason fields near the crack tip are obtained exactly. The path-independent integral derived by a conservation law equals the energy release rate, which can be used as a fracture criterion for a mode III fracture problem.     

Stress intensity factors for interface crack in finite size specimen using a generalized variational approach

A generalized variational approach together with eigenfunction expansion is applied to determine the stress intensity factors for interface crack in finite size specimen. Application is also made of the complex potentials such that a complex stress intensity factor with components corresponding to the Mode I and II stress intensity factors can be identified with one of the leading coefficients in the eigenfunction expansion. Obtained are the numerical values of the stress intensity factors for an interface edge crack in a bimaterial rectangular specimen. The outside boundary is subjected to uniform stress normal and parallel to the crack. Solutions are also obtained for the same crack aand specimen geoinetry is subjected to a pair of equal and opposite concentrated forces along the open end away from the edge crack. The third example pertains to the case of three-point bending where the centre concentrated load is directed along the interface dividing the two materials. Numerical results are obtained for four different combinations of the bimaterial specimen with an interface edge crack.     

Crack problem under shear loading in cubic quasicrystal

IntroductionQuasicrystalasanewstructureofsolidmatter[1,2 ]bringsprofoundnewideastothetraditionalcondensedmatterphysicsandencouragesconsiderabletheoreticalandexperimentalstudiesonthephysicalandmechanicalpropertiesofthematerial,includingtheelasticitytheoryofthequasicrystal,manyvaluableresultsweregiven[3～ 5 ].Defectsinthematerialwereobservedsoonafterthediscoveryofthequasicrystal[6 ,7].Cracksareonetypeofdefects,theirexistencegreatlyinfluencesthephysicalandmechanicalpropertiesofthequasicrystalinem…     

ANTI-PLANE FRACTURE ANALYSIS OF FUNCTIONALLY GRADIENT MATERIAL INFINITE STRIP WITH FINITE WIDTH

The special case of a crack under mode III conditions was treated, lying parallel to the edges of an infinite strip with finite width and with the shear modulus varying exponentially perpendicular to the edges. By using Fourier transforms the problem was formulated in terms of a singular integral equation. It was numerically solved by representing the unknown dislocation density by a truncated series of Chebyshev polynomials leading to a linear system of equations. The stress intensity factor (SIF) results were discussed with respect to the influences of different geometric parameters and the strength of the non-homogeneity. It was indicated that the SIF increases with the increase of the crack length and decreases with the increase of the rigidity of the material in the vicinity of crack. The SIF of narrow strip is very sensitive to the change of the non-homogeneity parameter and its variation is complicated. With the increase of the non-homogeneity parameter, the stress intensity factor may increase, decrease or keep constant, which is mainly determined by the strip width and the relative crack location. If the crack is located at the midline of the strip or if the strip is wide, the stress intensity factor is not sensitive to the material non-homogeneity parameter.     

疲劳裂纹闭合研究的进展

本文阐述了疲劳裂纹闭合的四种诱发机制,介绍了疲劳裂纹闭合现象测量的几种方法并结合作者的工作进行了评述.文中详细地介绍和探讨了材料、应力比、试样几何尺寸、环境及载荷谱等因素对裂纹闭合现象的影响,指出了目前研究工作中存在的问题.并对今后开展研究工作的方向提出了看法.     

Interfacial crack problem in layered soft ferromagnetic materials in uniform magnetic field

The magnetoelastic plane strain problem of an interfacial Griffith crack between two dissimilar soft ferromagnetic elastic materials subjected to a uniform magnetostatic field is considered within the framework of linear magnetoelasticity. By making use of the Fourier integral transform technique, the mixed boundary problem is then reduced to a pair of singular integral equations of the second kind. Solutions of the singular integral equations are obtained numerically by means of a Jacobi polynomial expansion method. Effects of the magnetic field, the combinations of the magnetic properties of materials and the geometric parameters on the magnetoelastic stress intensity factors in the vicinity of crack tip are shown graphically.     

Crack shielding and material deterioration in damaged materials: an antiplane shear fracture problem

Summary A simple damage evolution model is proposed for a quasibrittle material in the framework of continuum damage mechanics. The model is used to obtain a closed form solution for a mode-III stationary crack under small scale damage conditions. It is found that the crack tip stress intensity factor is reduced, i.e., the crack is shielded by the damage. However, this shielding effect is completely offset by the material deterioration caused by the damage. It also holds for steady state crack growth. When the most effective shielding is reached for the stationary crack, the zone dominated by the stress intensity factor shrinks to the crack tip. The results for the antiplane shear problem should shed some light on the in- plane fracture problem. Received 4 August 1997; accepted for publication 7 October 1997     

有限长轴承非稳态油膜力自由-移动边界问题的有限条解法

讨论了不可压缩流体润滑的动载径向滑动轴承油膜压力分布的自由移动边界问题的有限条解法．将自由边界问题转化为全域(矩形域)的具有不等式约束的微分方程的边值问题,进一步化为具有不等式约束的泛函极值问题。借助有限条法在矩形域上离散这个泛函,得到了一个特殊的二次泛函的规化问题。通过变量平移变换,使其化为标准的二次规划问题。然后借助于牛顿非光滑算法,迭代求解非线性的互补方程。给出了有限长轴承真实的油膜应力分布。对于所求解方程的系数矩阵的高度稀疏性。给出了紧缩存储算法。节省了存储空间和减少了计算量。算例表明该方法是有效的。     

Propagation of an anti-plane moving crack in a functionally graded piezoelectric strip

Summary The propagation of an anti-plane moving crack in a functionally graded piezoelectric strip (FGPS) is studied in this paper. The governing equations for the proposed analysis are solved using Fourier cosine transform. The mixed boundary value problems of the anti-plane moving crack, which is assumed to be either impermeable or permeable, are formulated as dual integral equations. By appropriate transformations, the dual integral equations are reduced to Fredholm integral equations of the second kind. For the impermeable crack, the stress intensity factor (SIF) of the crack in the FGPS depends on both the mechanical and electric loading, whereas, the SIF for the permeable crack depends only on the mechanical loading. The results obtained show that the gradient parameter of the FGPS and the velocity of the crack have significant influence on the dynamic SIF.Support from the Research Grants Council of the Hong Kong Special Administrative Region, China (Project No. HKU 7081/00E) is acknowledged. Support from the National Natural Science Foundation of China (Project No. 10072041) is also acknowledged.     

Effects of the weak/micro-discontinuity of interface on the fracture behavior of a functionally graded coating with an inclined crack

The mechanical model was established for the anti-plane fracture problem of a functionally graded coating–substrate system with a coating crack inclined to the weak/micro-discontinuous interface. The Cauchy singular integral equation for the crack was derived using Fourier integral transform, and the Lobatto–Chebyshev collocation method put up by Erdogan and Gupta was used to get its numerical solution. Finally, the effects of the weak/micro-discontinuity of the interface on SIFs were analyzed, the “affected regions” corresponding to the two crack tips have been obtained and their engineering significance was discussed. It was indicated that, for the crack tip in the corresponding “affected region”, to reduce the weak-discontinuity of the interface and to make the interface micro-discontinuous are the two effective ways to reduce the SIF, and the latter way always has more remarkable SIF-reduction effect. For the crack tip outside the “affected region”, its SIF is mainly influenced by material stiffness, and to prevent such a tip from growing toward the interface “softer coating and stiffer substrate” is a more advantageous combination than “stiffer coating and softer substrate”.     

Introducing new cracked finite elements and a method for SIF calculation of cracks

Two different types of 8-node cracked quadrilateral finite element are presented for fracture applications. The first element contains a central crack and the other one includes an edge crack. The introduced elements are applicable in 2D problems. The crack is not physically modeled within the element, but instead, its effects on the stiffness matrix are taken into account by utilizing linear fracture mechanics laws. Furthermore, a simple and practical procedure is proposed for calculation of stress intensity factor (SIF) by employing proposed cracked elements. Several numerical examples are presented to evaluate the capabilities of the proposed elements and procedure.     

含中心裂纹任意截面柱体扭转时的应力强度因子计算

本文提出了一组应力函数,采用边界配置方法计算了含中心裂纹不同截面形状柱体扭转时的应力强度因子。有关椭圆截面柱体的算例表明,本文方法具有良好的精度。同时,文中给出了圆、椭圆和矩形等不同截面柱体的计算结果。     

Anti-plane analysis of semi-infinite crack in piezoelectric strip

Using the complex variable function method and the technique of the conformal mapping, the fracture problem of a semi-infinite crack in a piezoelectric strip is studied under the anti-plane shear stress and the in-plane electric load. The analytic solutions of the field intensity factors and the mechanical strain energy release rate are presented under the assumption that the surface of the crack is electrically impermeable. When the height of the strip tends to infinity, the analytic solutions of an infinitely large piezoelectric solid with a semi-infinite crack are obtained. Moreover, the present results can be reduced to the well-known solutions for a purely elastic material in the absence of the electric loading. In addition, numerical examples are given to show the influences of the loaded crack length, the height of the strip, and the applied mechanical/electric loads on the mechanical strain energy release rate.     

Torsional impact response of a penny-shaped crack in a functional graded strip

The torsional impact response of a penny-shaped crack in a nonhomogeneous strip is considered. The shear modulus is assumed to be functionally graded such that the mathematics is tractable. Laplace and Hankel transforms were used to reduce the problem to solving a Fredholm integral equation. The crack tip stress field is obtained by considering the asymptotic behavior of Bessel function. Explicit expressions of both the dynamic stress intensity factor and the energy density factor were derived. And it is shown that, as crack driving force, they are equivalent for the present crack problem. Investigated are the effects of material nonhomogeneity and strip‘s highness on the dynamic fracture behavior.Numerical results reveal that the peak of the dynamic stress intensity factor can be suppressed by increasing the nonhomogeneity parameter of the shear modulus, and that the dynamic behavior varies little with the adjusting of the strip‘ s highness.     

一种计算三维裂纹应力强度因子的新方法

构造了一种新的三维奇异单元,提出了一种有效计算三维裂纹应力强度因子新的数值方法。该方法的计算结果与理论解和Newman解结果一致;与Panson等方法相比所使用的自由度数大大减小。结果表明该方法是一种高效、稳定可靠的计算方法。     

应用修正的虚裂纹模型研究混凝土结构的三维裂缝扩展

本文在虚裂纹模型中引入初裂强度因子的概念以研究混凝土结构的三维裂缝扩展。虚裂纹的扩展由裂纹尖端的初裂强度因子和虚裂纹所传递的软化应力共同控制。将软化应力分析曲线分段线性化进行模拟,这使问题得到很大程度的简化,同时又保证了解的必要精度。对所建立的有限元基本方程组建议了一次性的求解方法,可以不进行迭代,这既保持了解的稳定,又减轻了计算工作量。     

Asymptotic fields in the finite element analysis of electrically permeable interface cracks in piezoelectric bimaterials

Summary The interface crack problem for a piezoelectric bimaterial based on permeable conditions is studied numerically. To find the singular electromechanical field at the crack tip, an asymptotic solution is derived in connection with the conventional finite element method. For mechanical and electrical loads, the complex stress intensity factor for an interface crack is obtained. The influence of the applied loads on the electromechanical fields near the crack tip is also studied. For a particular case of a short crack with respect to the bimaterial size, the numerical results are compared with the exact analytical solutions, obtained for a piezoelectric bimaterial plane with an interface crack.One author (V.G.) gratefully acknowledges the support provided by the Alexander von Humboldt Foundation of Germany.accepted for publication 7 June 2004     

Transient response of a cracked piezoelectric strip under arbitrary electro-mechanical impact

By using the well-developed integral transform methodology, the dynamic response of stress and electric displacement around a finite crack in an infinite piezoelectric strip are investigated under arbitrary dynamic anti-plane loads. The dynamic stress intensity factors and electric displacement are obtained analytically. It is shown that the dynamic crack-tip stress and electric field still have a square-root singularity. Numerical computations for the dynamic stress intensity factor show that the electric load has a significant influence on the dynamic response of stress field. The higher the ratio of the crack length to the width of the strip, the higher the peak value of the dynamic stress intensity factor is. On the other hand, the dynamic response of the electric field is determined solely by the applied electric load. The electric field will promote or retard the propagation of the crack depending on the time elapse since the application of the external electro-mechanical loads. The project supported by the National Natural Science Foundation of China and the Post-Doctor Science Foundation of China     

Crack growth under alternating loading

Crack propagation under alternating loading is investigated. Relations between the growth rate of a fatigue defect and loading parameters and the expression for the stress intensity factor are derived for compression of a cracked solid taking into account the possible contact of the crack faces. A model for the deformation of a small region near the crack tip is proposed which allows one to formulate the conditions of residual opening of a growing fatigue crack. The experimental data obtained in tests of steel samples are compared with the results of calculation using the developed procedure. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 49, No. 5, pp. 190–198, September–October, 2008.     

含表面半椭圆裂纹板裂纹尖端应力强度因子的三维光弹分析

本文用三维光弹法得到了含表面半椭圆裂纹板拉伸载荷下应力强度因子 K_Ⅰ沿整个裂纹前缘的分布及由不同裂纹深度引起的有限厚度效应,得到的实验结果与理论结果进行了比较和分析,并对角点上的奇异性进行了定性分析.