Synthesis and photoluminescence properties of the high-brightness Eu3+-doped Sr3Bi(PO4)3 phosphors

A series of orange reddish emitting phosphors Eu³⁺-doped Sr₃Bi(PO₄)₃ have been successfully synthesized by conventional solid-state reaction, and its photoluminescence (PL) properties have been investigated. The excitation spectra reveal strong excitation bands at 392 nm, which match well with the popular emissions from near-UV light-emitting diode chips. The emission spectra of Sr₃Bi(PO₄)₃:Eu³⁺ phosphors invariably exhibit five peaks assigned to the ⁵D₀→⁷F_J (J=0, 1, 2, 3, 4) transitions of Eu³⁺ and have dominating emission peak at 612 nm under 392 nm excitation. The luminescence intensity was enhanced with increasing Eu³⁺ content and the emission reached the maximum intensity at x=0.05 in Sr₃Bi(PO₄)₃:xEu³⁺. The energy transfer behavior in the phosphors was discussed. The Commission Internationale de lEclairage (CIE) chromaticity coordinates, the quantum efficiencies, and the decay curves of the entitled phosphors excited under 392 nm are also investigated. The experimental results indicate that the Eu³⁺-doped Sr₃Bi(PO₄)₃ phosphors are promising orange reddish-emitting phosphors pumped by near-UV light.     

Violet-blue-shift of emission and enhanced luminescent properties of Ca3(PO4)2:Ce3+ phosphor induced by substitution of Gd3+ ions

Ca₃(PO₄)₂:1mol%Ce³⁺/xGd³⁺ (where x = 0.5, 1.0, 3.0 and 5.0 mol%) phosphors were synthesized by the conventional combustion synthesis method. The X-ray diffraction patterns showed their rhombohedral structure with space group of R3c. The optical properties including reflectance, excitation and emission were investigated. The band gaps of the phosphors were calculated from diffuse reflectance spectra data using the Kubelka–Munk function. The photoluminescence (PL) excitation spectra exhibited the broadband 4f–5d transition of Ce³⁺ ions centered at ~265 nm. The PL emission properties of the Ca₃(PO₄)₂:Ce³⁺/Gd³⁺ phosphors were studied as a function of the Gd³⁺ ion concentration. The Ca₃(PO₄)₂:Ce³⁺/Gd³⁺ phosphor had a wide emission band ranging from 320 to 400 nm, and peaking at 365 nm. This emission is ascribed to the transition from the higher 5d band to ²F_7/2, ²F_5/2 states of the Ce³⁺ ion. The 365 nm peak shifted to longer wavelengths with increasing concentration of the Gd³⁺ ion. The CIE chromaticity diagram of Ca₃(PO₄)₂:Ce³⁺/Gd³⁺ phosphor showed tunable emission colour from violet to violet-blue, suggesting that this phosphor can act as a source of violet-blue colour for application in information displays, phototherapy and photoluminescent liquid crystal displays.     

White LED based on nano-YAG:Ce3+/YAG:Ce3+,Gd3+ hybrid phosphors

Nano-YAG:Ce³⁺ and YAG:Ce³⁺,Gd³⁺ phosphors were synthesized by glycothermal method. The X-ray diffraction (XRD) measurements showed that the samples can be well-crystallized at 600 °C. The transition electron microscope (TEM) showed that the particles have sizes mostly in the range between 35 and 100 nm. The YAG:Ce nano-phosphor had a wide emission band ranging from blue to yellow peaking at 532 nm, due to the transition from the lowest 5d band to ²F_7/2, ²F_5/2 states of the Ce³⁺ ion. Red-shift of emission peak wavelength from 532 nm to 568 nm has been achieved as doping Gd³⁺ ions into the YAG:Ce³⁺ to substitute some Y³⁺ ions. White LEDs were fabricated by combining GaN (460 nm) chip with the YAG:Ce³⁺ and YAG:Ce³⁺,Gd³⁺. Color rendering index of the white LED as a function of the ratios of theses two kinds of phosphors was studied. As the ratio of YAG:Ce³⁺,Gd³⁺ phosphor increased, the color rendering index of the LED improved significantly under the forward bias of 20 mA. As the ratio of YAG:Ce³⁺ and YAG:Ce³⁺,Gd³⁺ was 11:9, the white LED had a color rendering index, CIE chromaticity coordinates and color temperature T_c of 85, (0.3116, 0.3202) and 6564 K, respectively.     

Synthesis and luminescence of La2BaZnO5 phosphors

A modified synthesis of La₂BaZnO₅ phosphors activated with rare earths Eu³⁺, Tb³⁺, Pr³⁺ and Sm³⁺, and ns² ion Bi³⁺ is reported. RE₂BaZnO₅ compounds are conventionally prepared by two step solid state reaction. In the first step, carbonates or similar precursors are intimately mixed and heated at 900 °C to decompose the precursors to oxides. To eliminate the unwanted phases like BaRE₂O₄, the resulting powders are reheated at 1100 °C for long time. We prepared La₂BaZnO₅ phosphors activated with various activators by replacing the first step by combustion synthesis. Results on photoluminescence are presented. PL results on Eu³⁺ and Tb³⁺ are in good agreement with the literature reports. PL emission from Sm³⁺, Pr³⁺ and Bi³⁺ had not been reported earlier. Excitation spectrum of Eu³⁺ is dominated by a charge transfer band around 318 nm, while for the other rare earths a band at 240 nm is always present. This is attributed to the host absorption.     

A potential red emitting K4Ca(PO4)2: Eu3+ phosphor for white light emitting diodes

Europium (III) ions doped red phosphors K₄Ca(PO₄)₂ were prepared first time by high temperature solid state reaction method. The prepared phosphors structure was examined by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) analyses. The thermal properties of the synthesized phosphor were investigated by differential scanning calorimetry (DSC) analysis. Photoluminescence (PL) spectra of K₄Ca(PO₄)₂:Eu³⁺ phosphors have shown strong red emission at 618 nm (⁵D₀→⁷F₂) with near UV an excitation wavelength of λ_exc=394 nm (⁷F₀→⁵L₆). In addition, the decay curves and CIE color coordinate measurements are also carried out. Hence, emission and excitation characterization of synthesized phosphors shows that the phosphors may be a promising red component for the application in the white light emitting diodes (WLEDs).     

Enhanced photoluminescence intensity of Y2O3: Eu3+ Sheets by codoping Pr3+ and involved energy transfer mechanisms

Y₂O₃: Eu³⁺ has been widely applied as red phosphors in the fields of displaying and illumination. Here, we report the enhanced luminescence intensity of Y₂O₃: Eu³⁺ by codoping Pr³⁺ ion. The Pr³⁺ and Eu³⁺ doped Y₂O₃ microsheets with high aspect ratio were synthesized by a simple route combining chemical precipitation and pyrolysis, which could emit intense red light centered at 610 nm under the 254 and 365 nm UV excitation. The fluorescence measurement indicated that the luminescence intensity of Y₂O₃: Eu³⁺, Pr³⁺ did not increase monotonously with increasing Pr³⁺ concentration. The highest improvement of the photoluminescence intensity of Y₂O₃:Eu³⁺ was realized in the sample doped with 2 mol% Pr³⁺, which was of 17.8% higher than the whole intensity of only Eu³⁺ doped Y₂O₃.The mechanism analysis based on SEM, XRD, fluorescence spectra, and simplified energy level diagram indicated that (1) energy transfer process between Pr³⁺ and Eu³⁺, (2) crystallinity, and (3) symmetry should respond for this nonmonotonous variation phenomenon by competition with each other. For energy transfer process between Pr³⁺ and Eu³⁺, it was suggested that the cross relaxation of ⁵D₀ + ⁷F₁(Eu³⁺)?³P₀ + ³H₆(Pr³⁺) and the efficient energy transfer from ³P₀ state of Pr³⁺ to ⁵D₁ energy level of Eu³⁺ lead to the improvement of the population of the ⁵D₀ state of Eu³⁺ so that the 610 red emission of Eu³⁺ ion was accordingly enhanced.     

Photoluminescence and thermoluminescence characterization of Eu- and Dy -activated Ca3(PO4)2 phosphor

Rare-earth-doped polycrystalline Ca₃(PO₄)₂:Eu, Ca₃(PO₄)₂:Dy and Ca₃(PO₄)₂:Eu,Dy phosphors prepared by a modified solid-state synthesis has been studied for its X-ray diffraction, thermoluminescence (TL) and photoluminescence (PL) characteristics. The PL emission spectra of the phosphor suggest the presence of Eu³⁺ ion in Ca₃(PO₄)₂:Eu and Dy³⁺ ion in Ca₃(PO₄)₂:Dy lattice sites. The TL glow curve of the Ca₃(PO₄)₂:Eu compounds has a simple structure with a prominent peak at 228 °C, while Ca₃(PO₄)₂:Dy peaking at 146 and 230 °C. TL sensitivity of phosphors are compared with CaSO₄: Dy and found 1.52 and 1.20 times less in Ca₃(PO₄)₂:Eu and Ca₃(PO₄)₂:Dy phosphors, respectively. The Ca₃(PO₄)₂:Eu,Dy phosphors shows switching behavior under two different excitation wavelengths and enhancement in PL intensity of Dy³⁺ ions were reported. The paper discusses the photoluminescence and thermoluminescence behavior of Eu³⁺ and Dy³⁺ ion in Ca₃(PO₄)₂ hosts, it may be applicable to solid-state lighting as well as thermoluminescence dosimetry applications.     

Emission-tunable phosphors Ca9MgM′ (PO4)7: Eu2+,Mn2+ (M′=Li,Na, K) for white light-emitting diodes

A series of single-composition phosphors Ca₉MgM′(PO₄)₇:xEu²⁺, yMn²⁺ (CMM′ P:Eu²⁺, Mn²⁺; M′=Li, Na, K; 0.003≤x≤0.03; 0 ≤y≤0.1) were synthesized by solid state reactions. Upon excitation at 337 nm, phosphors Ca₉MgM′ (PO₄)₇: Eu²⁺ exhibit strong blue emissions centered at 417 (Ca₉MgLi(PO₄)₇:Eu²⁺), 457 (Ca₉MgNa(PO₄)₇:Eu²⁺), and 453 (Ca₉MgK(PO₄)₇:Eu²⁺) nm respectively, which correspond to the 4f⁶5d¹→4f⁷ transitions of Eu²⁺ ions, Through an effective resonance-type energy transfer, CMM′P:Eu²⁺,Mn²⁺ phosphors exhibit a series of colors by adjusting the concentration of Mn²⁺. The result indicates that CMM′P:Eu²⁺,Mn²⁺ can be potentially used as a UV excited phosphor for white light-emitting diodes (LEDs).     

Synthesis and photoluminescent behavior of Eu3+-doped alkaline-earth tungstates

Eu³⁺-doped alkaline-earth tungstates MWO₄ (M=Ca²⁺, Sr²⁺, Ba²⁺) were prepared by a polymeric precursor method based on the Pechini process. The polymeric precursors were calcined at 700 °C for 2 h in order to obtain well-crystallized powders and then characterized by X-ray diffraction (XRD), thermogravimetric analysis (TG), scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy and photoluminescence spectroscopy (PL). All prepared samples showed a pure crystalline phase with scheelite-type structure confirmed by XRD. It was noted that the charge-transfer band shifted from 260 to 283 nm when calcium is replaced by strontium. However, this band was not observed for Eu³⁺-doped barium tungstate. Upon excitation at 260 nm, the emission spectra are dominated by the red ⁵D₀→⁷F₂ transition at 618 nm. By analyzing of the emission lines, it was inferred that Eu³⁺ ions occupy low symmetry sites in the host lattice. It was also found that Eu³⁺-doped SrWO₄ displays better chromaticity coordinates and greater luminescence intensity than the other samples.     

Luminescence properties of Eu3+ and Sm3+ coactivated Gd(III) tungstate phosphor for light-emitting diodes

Rare-earth ions coactivated red phosphors Gd_0.2RE_1.8(WO₄)₃ (RE=Eu³⁺ and Sm³⁺) were synthesized by conventional solid-state reaction using boric acid as a flux agent. The samples were characterized by X-ray diffractometer (XRD), energy-dispersive X-ray spectrometer (EDS) and luminescence spectrometer (LS). The results showed that the Eu–Sm system exhibits higher emission intensity than those of the Eu single-doped system and Sm separate-doped system under ultraviolet (UV) radiation. Samarium(III) ions are effective in broadening and strengthened absorptions around 400 nm. Furthermore, it exhibits enhanced luminescence emission. when the mole ratio of boric acid is about 0.16, the luminescence capability is optimum. Two strongest lines at ultraviolet (394 nm) and blue (465 nm) in excitation spectra of these phosphors match well with the output wavelengths of UV and blue GaN-based light-emitting diodes (LEDs) chips.     

Synthesis and luminescence properties of a broad-band red phosphor Ca3Si2O7:Eu2+ for warm white light-emitting diodes

Single-phase broad-band red-emitting Ca₃Si₂O₇:Eu²⁺ phosphors, with photoluminescence features that qualify them as candidates for white light-emitting diodes applications, were successfully synthesized via a modified solid-state reaction method that employed H₃BO₃ as a flux. The phosphors produced have an intense broad red emission band, with a peak at 603 nm, a full width at half maximum of 110 nm, and color coordinates of (0.550, 0.438). Concentration quenching occurred at 0.01 mol Eu²⁺. The discussion of the results shows that Eu²⁺ ions should be accommodated at the Ca-sites of the lattice, dipole–dipole interactions should predominantly govern the energy transfer mechanism among them, and the critical distance between them is ～31 Å.     

Synthesis and luminescence properties of Gd6MoO12:Yb3+, Er3+ phosphor with enhanced photoluminescence by Li+ doping

Yb³⁺/Er³⁺ co-doped Gd₆MoO₁₂ and Yb³⁺/Er³⁺/Li⁺ tri-doped Gd₆MoO₁₂ phosphors were prepared by adjusting the annealing temperature via the high temperature solid-state method. Under the excitation of 980 nm semiconductor, the upconversion luminescence properties were investigated and discussed. In the experimental process, we get the optimum Yb³⁺ concentration and the concentration quench effect will happen while the concentration extends the given region. According to the Yb³⁺ concentration quenching effects, the critical distance between Yb³⁺ ions had been calculated. The measured UC luminescence exhibited a strong red emission near 660 nm and green emission at 530 nm and 550 nm, which are due to the transitions of Er³⁺(⁴F_9/2, ²H_11/2, ⁴S_3/2) → Er³⁺(⁴I_15/2). Then the effect of excitation power density in different regions on the upconversion mechanisms was investigated and the calculated results demonstrate that the green and red upconversion is a two-photon process. A possible mechanism was discussed. After Li⁺ ions mixing, the upconversion emission enhanced largely, and the optimum Li⁺ concentration was obtained while fixed the Yb³⁺ and Er³⁺ on the above optimum concentration. This enhancement owns to the decrease of the local symmetry around Er³⁺ after Li⁺ ions doping into the system. This result indicates that Li⁺ is a promising candidate for improving luminescence in some case.     

Microwave sol-gel process of KGd(WO4)2:Ho3+/Yb3 phosphors and their upconversion photoluminescence properties

Double tungstate KGd_1−x(WO₄)₂:Ho³⁺/Yb³⁺ phosphors with doping concentrations of Ho³⁺ and Yb³⁺ (x=Ho³⁺+Yb³⁺, Ho³⁺=0.05, 0.1, 0.2 and Yb³⁺=0.2, 0.45) were successfully synthesized by the microwave sol–gel method, and the upconversion mechanisms were investigated in detail. The synthesized particles formed after heat-treatment at 900 °C for 16 h showed a well crystallized morphology with particle sizes of 2–5 μm. Under excitation at 980 nm, the UC intensities of KGd_0.7(WO₄)₂:Ho_0.1Yb_0.2 and KGd_0.5(WO₄)₂Ho_0.05Yb_0.45 particles exhibited yellow emissions based on a strong 550-nm emission band in the green region and a strong 655-nm emission band in the red region, which were assigned to the ⁵S₂/⁵F₄→⁵I₈ and ⁵F₅→⁵I₈ transitions, respectively. The Raman spectra of the doped particles indicated the presence of strong peaks at higher frequencies of 764, 812, 904, 984, 1050, 1106, 1250 and 1340 cm⁻¹ induced by the disorder of the [WO₄]²⁻ groups with the incorporation of the Ho³⁺ and Yb³⁺ elements into the crystal lattice or by a new phase formation.     

Ca8Mg(SiO4)4Cl2:Ce3+, Tb3+: A potential single-phased phosphor for white-light-emitting diodes

A single-phased white-light-emitting phosphor Ca₈Mg(SiO₄)₄Cl₂:Ce³⁺, Tb³⁺ (CMSC:Ce³⁺, Tb³⁺) is synthesized by a high temperature solid-state reaction method, and its photoluminescence properties are investigated. The obtained phosphor exhibits a strong excitation band between 250 and 410 nm, matching well with the dominant emission band of a UV light-emitting-diode (LED) chip. Energy transfer from Ce³⁺ to Tb³⁺ ions has been investigated and demonstrated to be a resonant type via a dipole–dipole mechanism. The energy transfer efficiency as well as the critical distance is also estimated. Furthermore, the phosphors can generate light from yellow-green through white and eventually to blue by properly tuning the relative ratio of Ce³⁺ to Tb³⁺ ions grounded on the principle of energy transfer. The results show that this phosphor has potential applications as a single-phased phosphor for UV white-light LEDs.     

Luminescent properties of Mg3Ca3(PO4)4: Eu2+ blue-emitting phosphor for white light emitting diodes

A blue-emitting phosphor, Eu²⁺-activated Mg₃Ca₃(PO₄)₄ phosphor was synthesized by conventional solid-state reaction. X-ray powder diffraction (XRD) analysis confirmed the phase formation. Photoluminescence (PL) results showed that Mg₃Ca₃(PO₄)₄: Eu²⁺ could be efficiently excited by UV–visible light from 250 to 430 nm, which matched well with the emission wavelengths of near-UV and UV LED chips. The effects of the doped-Eu²⁺ concentration in Mg₃Ca₃(PO₄)₄: Eu²⁺ on the PL were also investigated. The result reveals that Mg₃Ca₃(PO₄)₄: Eu²⁺ is a potential blue-emitting phosphor for white LEDs.     

Optical study of rare earth activated NaBa0.45Sr0.55PO4 phosphor

Dy³⁺ and Eu²⁺ activated triple phosphate NaBa_0.45Sr_0.55PO₄ phosphors were prepared by facile combustion synthesis. Excellent emission observed when NaBa_0.45Sr_0.55PO₄:Dy³⁺ and NaBa_0.45Sr_0.55PO₄:Eu²⁺ excited at 348 nm and 354 nm wavelength respectively. From a powder X-ray diffraction (XRD) analysis, the formation of compound with a trigonal–hexagonal scalenohedral structure was confirmed. In the photoluminescence spectra, the NaBa_0.45Sr_0.55PO₄:Dy³⁺ phosphor emits two distinctive colours: a blue band centred at 482 nm and a yellow band at 576 nm originating from Dy³⁺ whereas NaBa_0.45Sr_0.55PO₄:Eu²⁺ emits blue colour at 470 nm. Also, surface morphology has been studied by scanning electron microscope (SEM). Phosphors exhibit a strong absorption in the range of 340–400 nm and chromatic properties indicated that present phosphor is a hopeful candidate for near ultra violet light emitting diodes (nUV LEDs).     

Synthesis and luminescence properties of green phosphors Ca6Sr4(Si2O7)3Cl2:Eu2+ for white light emitting diodes

Divalent europium-activated chlorosilicate Ca₆Sr₄(Si₂O₇)₃Cl₂:Eu²⁺ phosphors were synthesized by a conventional solid-state reaction under reductive atmosphere. These phosphors can be efficiently excited by UV–visible light from 320 to 420 nm, which matches that of a near UV-emitting InGaN chip. Under the 360 nm excitation, Ca₆Sr_3.97(Si₂O₇)₃Cl₂:0.03Eu²⁺ phosphor shows a strong and broad emission centering at 515 nm, which is attributed to the 5d→4f transition of Eu²⁺ ion. The mechanism of concentration quenching was determined to be the dipole–dipole interaction and the critical energy-transfer distance of Eu²⁺ was calculated as 3.31 nm. The CIE chromaticity coordinates of Ca₆Sr_3.96(Si₂O₇)₃Cl₂:0.03Eu²⁺ phosphor are (0.127, 0.770) according to the emission spectrum. It can be expected that Ca₆Sr₄(Si₂O₇)₃Cl₂:Eu²⁺ phosphor is a promising candidate as the green component for near-ultraviolet InGaN-based white LED.     

Synthesis,characterization and studies of radiative properties on Eu3+-doped ZnAl2O4

Eu³⁺-doped ZnAl₂O₄ phosphors were successfully synthesized in air atmosphere at 900 °C. The phosphors were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), thermally stimulated luminescence (TSL) and photoluminescence (PL) techniques. The average particle size of the system as determined from SEM was found to be 100–150 nm (for samples annealed at 900 °C). PL spectra of the doped phosphors showed emission peaks corresponding to Eu³⁺ ions. Lifetime studies revealed Eu³⁺ ions to be in two different sites. The asymmetric ratio (I₆₁₆/I₅₉₂) was observed to be about 3.75. This suggested that Eu³⁺ ion entered the host mainly substituting Al³⁺ site distorting the local environment and is partly located on surface of the phosphors. A prominent glow peak at 430 K was observed in the TSL of γ-irradiated Eu³⁺-doped ZnAl₂O₄ phosphors. Trap parameters for this peak have been determined and the probable mechanism for the glow peak is proposed. CIE chromaticity coordinates for the system were evaluated. It was observed that, the system could be employed as a potential red emitting phosphor. Commercial utility of the phosphor was investigated by comparing it with commercial red phosphor. The PL intensity of the as prepared phosphors was 63% of that of the commercial phosphor. Apart from this, various radiative properties such as the Judd–Ofelt intensity parameters, spontaneous emission probabilities, luminescence branching ratios, radiative lifetimes and quantum efficiency were evaluated for the system.     

A novel red phosphor BaZn2(PO4)2:Sm3+, R+ (R=Li,Na, K)

BaZn₂(PO₄)₂:Sm³⁺ phosphor was synthesized by a high temperature solid-state reaction in atmosphere. BaZn₂(PO₄)₂:Sm³⁺ phosphor can be efficiently excited by ultraviolet and blue light, and the emission spectrum consists of three emission peaks at 568, 606 and 660 nm. By increasing the Sm³⁺ doped content, the emission intensity of the phosphor can reach the maximum at 0.02 mol Sm³⁺, then the concentration quenching occurs. By introducing the compensator charge R⁺ (R=Li, Na, K) into the BaZn₂(PO₄)₂:Sm³⁺ phosphor, its emission intensity can be enhanced. The Commission International de l'Eclairage (CIE) chromaticity coordinates of Ba_0.96Zn₂(PO₄)₂:0.02Sm³⁺, 0.02K⁺ phosphor were (x=0.623, y=0.361). The results indicate that BaZn₂(PO₄)₂:Sm³⁺, R⁺ (R=Li, Na, K) may be a promising red phosphor for white light-emitting diodes.     

White-light generation through Ce3+/Mn2+-codoped and Eu2+-doped Ba1.2Ca0.8SiO4 T-phase phosphors

Hexagonal Ba_1.20Ca_0.8?2x?ySiO₄:xCe³⁺,xLi⁺,yMn²⁺ phosphors exhibit two emission bands peaking near 400 and 600 nm from the allowed f–d transition of Ce³⁺ ions and the forbidden ⁴T₁–⁶A₁ transition of Mn²⁺ ions, respectively. The strong interaction between Ce³⁺/Mn²⁺ ions is investigated in terms of energy transfer, crystal field effect, and microstructure by varying their concentrations. They show a higher quenching temperature of 250 °C than that of a commercially used (Ba,Sr)₂SiO₄:Eu²⁺ phosphor (150 °C). Finally, mixtures of these phosphors with green-emissive Ba_1.20Ca_0.70SiO₄:0.10Eu²⁺ are tested and yielded correlated color temperatures from 3500 to 7000 K, and color rendering indices up to 95%.