Strategies for molecular designing of novel low-band-gap electrically conducting polymers

Molecular designing of low-band-gap electrically conducting polymers continues to be a major challenge of the field of electrically conducting polymers. Such polymers are expected to show not only good intrinsic conductivity but also possibly a good transparency in the visible spectrum for their use as infrared sensors/detectors. Low-band-gap polymers can also be of great interest as new polymeric materials for nonlinear optics. Various routes presently followed to achieve this designing with special reference to the donor-acceptor polymers and important results obtained with this route are briefly reviewed.     

A novel spectrofluorimetric method for the determination of DNA

A new simple, selective and sensitive fluorescence quenching method was developed to determine nucleic acids (DNA) with the 9-anthracenecarboxylic acid (ACA)-cetyl trimethyl-ammonium bromide (CTAB) system. The fluorescence intensity of ACA was decreased by the addition (CTAB). However, the fluorescence intensity of the system increased dramatically when DNA was added to the solution. The fluorescence enhancement is probably based on the DNA interaction with CTAB. Under the optimum conditions, the changes of fluorescence intensity in the absence and presence of nucleic acids was proportional to the concentration of nucleic acids over the range 0.08-1.0 microg mL(-1) for CT (calf thymus) DNA or FS (fish sperm) DNA. Its detection limits are 0.02 microg mL(-1) for CT DNA and 0.019 microg mL(-1) for FS DNA. Based on this approach, a new quantitative method for DNA assay is presented in this paper.     

A novel method for the spectrophotometric determination of nitrite in water

A rapid, simple, selective and sensitive method for the spectrophotometric determination of nitrite in water has been developed and optimum reaction conditions along with other analytical parameters have been evaluated. Nitrite reacts with barbituric acid in acidic solution to give the nitroso derivative, violuric acid. At analytical wavelength of 310 nm, Beer's law is obeyed over the concentration range 0.00–3.22 ppm of nitrite. The molar absorptivity is 15330 ± 259.7 (95%) with pooled standard deviation of 355.57 and R.S.D. of 2.32%. As well as the method is sensitive (2.99 × 10⁻³ μg NO₂ cm⁻²) and selective, it tolerates most of the potential interferents. It has been successfully applied to nitrite determination in natural waters by use of a calibration graph with determination limit of 1.66 μg NO₂ in 100 mL working solution corresponding to minimum 9.5 ppb NO₂–N in water samples. Lower concentrations of nitrite (3.0 μg NO₂/L sample) is precisely analyzed by using the method of dilution with sample, with R.S.D. of lower than 0.5%. The results were compared with standard N-(1-naphtyl)ethylenediamine dihydrochloride method and very good agreement between the data was observed. The method can easily be applied in the field.     

A novel method for the determination of phospholipids in starch matrixes

A method is proposed for the determination of phospholipids in a starch matrix. It is based on the chemical gelation of starch in a mixture starch-phosphatidylcholine using dimethyl sulfoxide followed by the quantification of phosphorus in the gel formed by ³¹P NMR in the presence of a standard, tributyl phosphate. The method makes possible the determination of phospholipid concentrations below one percent in no relation to its state in the starch matrix.     

A novel 1,10-phenanthroline-sensitive membrane sensor for potentiometric determination of Hg(II) and Cu(II)cations

Preparation, characterization, and applications of a 1,10-phenanthrolinium cation (phenH(+))-sensitive potentiometric sensor are described. The sensor incorporates a liquid polymeric membrane consisting of phenH-tetraphenylborate, nitrophenyloctyl ether, and poly(vinyl chloride) as ion exchanger, plasticizer, and polymeric support, respectively. The sensor exhibits a fast and Nernstian response to phenH(+) over the concentration range of 6 x 10(-6)-2 x 10(-4) M with a monovalent cationic slope of 58.0+/-0.5 mV/log[phenH(+)] in acetate buffer of pH 4.2. The sensor is successfully applied to the monitoring of the potentiometric titration of Hg(II) and Cu(II) ions with phen solution in the presence of citrate and acetate buffers of pH 4.2, respectively. Sharp inflection breaks (90-180 mV) at 1:1 (metal:phen reaction) are obtained in the presence of chloride and thiocyanate background. This stoichiometry is explained by the formation of insoluble [HgCl(2)(phen)], [Hg(SCN)(2)(phen)], and [Cu(SCN)(2)(phen)] complexes. Optimization of each titration and the effect of foreign ions are evaluated. The method offers the advantages of adequate sensitivity, accuracy, and selectivity for the determination of mercury and copper in pharmaceutical, rock, and tea samples. The results are in good agreement with those obtained using the standard atomic absorption spectrometric and United States Pharmacopeial methods.     

A novel ferroin membrane sensor for potentiometric determination of iron

A novel potentiometric approach for both batch and flow injection determination of iron(II) and/or iron(III) is described. It is based on the formation and monitoring of ferroin with a PVC membrane sensor containing ferroin-TPB as an electroactive component plasticized with 2-nitrophenyl phenyl ether. The sensor exhibits fast Nernstian response for ferroin with a cationic calibration slope of 30 +/- 0.2 mV/concentration decade down to 4 x 10(-7)M ferroin (0.03 ppm Fe) at pH 3-9. Interferences from common inorganic cations are negligible or can be eliminated by a pretreatment with DDC. The ferroin sensor was successfully applied to the determination of iron contents in water, alloys, rocks and pharmaceuticals. The results show good correlation with data obtained by the standard spectrophotometric ferroin method, the coefficient of correlation is better than 0.7%.     

A novel kinetic-spectrophotometric method for determination of nitrites in water

A simple, selective and sensitive kinetic method for the determination of nitrite in water was developed. The method is based on the catalytic effect of nitrite on the oxidation of methylene blue (MB) with bromate in a sulfuric acid medium. During the oxidation process, absorbance of the reaction mixture decreases with the increasing time, inversely proportional to the nitrite concentration. The reaction rate was monitored spectrophotometrically at λ = 666 nm within 30 s of mixing. Linear calibration graph was obtained in the range of 0.005–0.5 μg mL⁻¹ with a relative standard deviation of 2.09 % for six measurements at 0.5 μg mL⁻¹. The detection limit was found to be 0.0015 μg mL⁻¹. The effect of different factors such as acidity, time, bromate concentration, MB concentration, ionic strength, and order of reactants additions is reported. Interference of the most common foreign ions was also investigated. The optimum experimental conditions were: 0.38 mol L⁻¹ H₂SO₄, 5 × 10.4 mol L⁻¹ KBrO₃, 1.25 × 10.5 mol L⁻¹ MB, 0.3 mol L⁻¹ sodium nitrate, and 25°C. The proposed method was conveniently applied for the determination of nitrite in spiked drinking water samples.     

Capillary zone electrophoresis method for the simultaneous determination of cations in honey

A capillary electrophoresis system for the simultaneous determination of cations in honey samples has been developed. The complete separation and quantification of K+, Ca2+, Na+, Mg2+, Mn2+, Ni2+ and Li+, which represent more than 99% of the total content of cations in honey, can be achieved in 4 min with only a dilution and filtration of the honey sample. Electrolyte solution was composed by 10 mM imidazole as the carrier buffer and background absorbance provider and acetic acid as the complexing agent (pH 3.60). The running voltage was + 25 kV at 25 degree C. Indirect UV detection was achieved at 185 nm. Under the optimum conditions the detection limits ranged from 0.02 to 48.2 mg/kg and the quantification limits have ranged from 0.41 to 48.7 mg/kg. Precision data in honey samples analysed have shown repeatability and reproducibility RSD (%) lower than 2.84 and 6.62%, respectively. Recoveries of cations in honey samples analysed have ranged from 88.5 to 101.8%. These cations were identified by their relative migration times with regard to Ba2+ migration time used as reference standard and they were quantified by using an external standard calibration. Twenty-five honey samples were analysed to test the proposed method. Mean contents of 1.22 x 10(3), 93, 85, 54, 11, 1.9 and 2.3 mg/kg were found, respectively, for K+, Ca2+, Na+, Mg2+, Mn2+, Ni2+ and Li+ cations in analysed honeys. These results were similar than the obtained by other authors.     

Synthesis of novel conducting polymers by cyclopolymerization of dipropargyl derivatives

Cyclopolymerization of dipropargyl derivatives which leads to new conjugated polymers was examined by various transition-metal catalyst systems. The highly colored polymers with average molecular weights of 10000–47000 were soluble in common organic solvents. Poly(dipropargyl derivatives) which possess polyene structures having cyclic recurring units in the polymer backbone, have been investigated for their physical properties such as solubility, the nature of doping process, electrical conductivity, and oxidation stability.     

毛细管电泳-化学发光联用新方法检测色氨酸

基于色氨酸对三(1,10-菲咯啉)钌(Ⅱ)[Ru(phen)32+]-Ce(Ⅳ)体系化学发光的增强作用,结合毛细管电泳分离技术,提出了一种毛细管电泳-化学发光检测色氨酸的新方法。在最优化的分离和检测条件下,该方法测定色氨酸的线性范围为5.0×10-7～2.0×10-5mol/L,检测限为7.6×10-8mol/L。将其应用于复方氨基酸注射液(18AA)中L-色氨酸含量的测定,结果满意。     

甲氧苄啶的毛细管电泳快速检测新方法

建立了毛细管电泳高频电导法测定药物和尿液中的甲氧苄啶。考察了各种条件对分离和检测的影响。以4.0 mmol/L HAc 体积分数10%甲醇(pH4.0)为电泳介质,分离电压20.0 kV,重力虹吸进样。在优化条件下,甲氧苄啶峰形良好,出峰时间小于6 min,线性范围为1.5~120.0μg/mL,检出限0.5μg/mL。该方法样品处理过程简单,可用于药物制剂的质量控制和临床检验。     

Interacting stereo-irregular chains: A model for conducting polymers

Interacting stereo-irregular chains of hydrogen atoms, which simulate the topological structure of many conducting polymers, are generated by a computer and solved numerically with the unrestricted Hartree–Fock method with a modified spin polarized potential. The electron localization is investigated, and a mechanism for the interchain tunneling is discovered. Local antiferromagnetic ordering is derived which may explain the AF behavior observed in some conducting polymers.     

Rapid capillary zone electrophoresis method for the determination of metal cations in beverages

A rapid and reliable capillary zone electrophoresis method for the determination of inorganic cations was developed. The complete separation of K⁺, Ba²⁺, Ca²⁺, Na⁺, Mg²⁺, Mn²⁺, Ni²⁺, Cd²⁺, Li⁺ and Cu²⁺ can be achieved in 4 min with a simple electrolyte composed by 10 mM imidazole as the carrier buffer and background absorbance provider and acetic acid as the complexing agent (pH 3.60). Injection was performed hydrostatically by elevating the sample at 10 cm for 30 s. The running voltage was +25 kV at room temperature. Indirect UV-absorption detection was achieved at 185 nm. The detection limit was in the range between 0.06 mg/l (Mg²⁺) and 0.57 mg/l (K⁺) and the quantification limits ranged from 0.10 mg/l (Ni²⁺) to 0.80 mg/l (Cu²⁺). The calibration graphs were linear in the concentration range from the quantification limit till at least 1 g/l in K⁺, 10 mg/l in Ba²⁺, Ca²⁺, Mg²⁺, Mn²⁺, Ni²⁺ and Cd²⁺, 40 mg/l in Na⁺ and 12 mg/l in Li⁺ and Cu²⁺. The repeatability, intraday and interday analysis were ≤1.55% and ≤3.64% for migration time and ≤3.38% and ≤3.63% for peak area. The method developed has been applied to several beverage samples with only a simple dilution and filtration treatment of the sample. The proposed method is simple, fast, cheap and it is achieved with common products in either laboratory. For these reasons, it is a very useful method for routine analysis.     

A novel capillary electrophoresis method for the determination of d-serine in neural samples

A capillary electrophoresis method has been developed for the determination of d-serine in neural samples. d/l-serine was tagged with naphthalene-2,3-dicarboxaldehyde (CBI-d/l-Ser), and the separation of CBI-d/l-Ser enantiomer was achieved by using a dual chiral selector system consisting of β-cyclodextrin (β-CD) and chiral micelles formed by sodium deoxycholate (SDC). No resolution was observed when either β-CD or SDC was used alone. Moreover, the combined use of β-CD with achiral micelles of sodium dodecylsulfate (SDS) exhibited no resolving effect. With laser induced fluorescence detection, the limit of detection was 3.0 × 10⁻⁸ M Ser. Under the separation conditions selected, no other amino acids co-eluted with l-/d-Ser enantiomers. Using the present method, d-Ser level in Aplysia ganglia homogenates was found to vary significantly from animal to animal. Interestingly, d-Ser was not detected in single neurons isolated from Aplysia ganglia.     

A novel chemiluminescent method for the determination of salicylic acid in bactericidal solutions

A new flow-injection procedure has been developed for the determination of salicylic acid based on the enhancement of the chemiluminescence from the cerium(IV)-Tween 20 reaction by salicylic acid in acidic medium. The method is simple, selective and sensitive with a detection limit of 2.5x10(-9) g mL(-1). It is applicable to the determination of salicylic acid in the concentration range of 4.0x10(-9)-1.1x10(-6) g mL(-1). The relative standard deviation (RSD) is 0.85% for 4.0x10(-7) g mL(-1) salicylic acid (n=11). The method has been successfully applied to the determination of salicylic acid in bactericidal solutions. Furthermore, it is suggested that light emission from cerium(IV)-Tween 20 reaction is probably because of the formation of singlet oxygen 1O2* and the emitter is excited oxygen molecular pairs O2(1delta(g))O2(1sigma(g)-).     

A novel method for the determination of synthetic colors in ice cream samples

A simple method has been developed for the extraction, separation, and determination of synthetic colors in ice cream samples. The process involves the breakdown of emulsion by neutral detergents (Triton X-100 and Tween 20) followed by extraction with petroleum ether for removal of fat. The aqueous colored solution obtained is treated with 5% acetic acid, and the uptake of color is carried out by a wool-dyeing technique. The color is eluted from the wool with 5% ammonia solution, the solution is evaporated to dryness, and the residue is dissolved in 60% ethanol for paper chromatography using trisodium citrate-ammonia-water (2 + 5 + 95, w/v/v) as the mobile phase. The colored spots from the paper chromatogram are cut and eluted with 60% ethanol, and the absorbance is measured at the respective lambda maximum corresponding to the Rf value of the appropriate standard. The recoveries of 6 colors, including sunset yellow FCF (SSYFCF), tartrazine, carmoisine, ponceau 4R, brilliant blue FCF (BBFCF), and fast green FCF from spiked samples with either detergent were found to be >90%. However, recoveries of erythrosine were 21 and 65% with Triton X-100 and Tween 20, respectively. Indigo carmine could not be recovered at all because of its fugitive property in 5% ammonia solution, which is used to strip the color from the wool. The sensitivity of the method with the use of Tween 20 is 1 ppm (1 microg/g) for the colors in spiked ice cream samples. With this method, we analyzed samples of 20 branded colored ice cream. The results showed the presence of tartrazine (8.4-43.3 ppm), SSYFCF (23.5-117.6 ppm), carmoisine (traces-53.2 ppm), erythrosine (3.5 ppm), and BBFCF (4.1 ppm) in the ice cream samples. Apart from 2 samples of tuttifruity, all of the ice cream samples showed the presence of permitted synthetic colors below the permissible level of 100 ppm established by the Prevention of Food Adulteration Act of India.