A simple spectrophotometric method for determination of isoxsuprine hydrochloride in pharmaceuticals

A spectrophotometric method has been developed for the determination of isoxsuprine hydrochloride and its dosage forms, based on its coupling reaction with diazotized sulphanilic acid. The yellow chromophore has an absorption maximum at 440 nm. Beer's law holds over the range 0.8-8 mu/ml in the final solution.     

Rapid titrimetric and spectrophotometric assay methods for the determination of lamivudine in pharmaceuticals using iodate and two dyes

One titrimetric and two spectrophotometric methods, which are simple, sensitive and rapid, are described for the assay of lamivudine in bulk drug and in tablet dosage forms using potassium iodate and two dyes, methyl orange and indigocarmine, as reagents. In titrimetry, an aqueous solution of lamivudine is titrated directly with iodate in an acidic medium, and in the presence of an excess of bromide using methyl orange as an indicator. After the decoloration of the red color of methyl orange, the residual bromine is titrated iodometrically to a starch endpoint. Spectrophotometric methods involve the addition of a known excess of iodate in an acidic medium and in the presence of an excess of bromide followed by the determination of residual bromine by the reaction with a fixed amount of either methyl orange and measuring the absorbance at 520 nm (method A), or indigo carmine and measuring the absorbance at 610 nm (method B). In all methods, the amount of iodate which reacted corresponds to the amount of lamivudine content. The titrimetric method is applicable over the 1.5–8.0 mg range. The systems obey Beer’s law for 0.5–5.0 μg/mL (method A) and 1.25–12.5 μg/mL (method B). The calculated apparent molar absorptivity values are found to be 3.3 × 10⁴ and 9.3 × 10³ L mol⁻¹ cm⁻¹, for method A and method B, respectively, and the corresponding Sandell sensitivity values are 6.94 and 24.62 ng/cm². The limits of detection and quantification are also reported for both spectrophotometric methods. Intra-and interday precision and accuracy for the developed methods have been evaluated. The methods were successfully applied to the assay of lamivudine in tablet form and the results were compared with those of a reference method by applying the Student’s t-test and F-test. No interference was observed from common tablet adjuvants. The accuracy and reliability of the methods were further ascertained by recovery experiments using the standard addition technique. The text was submitted by the authors in English.     

Bromatometric assay of simvastatin in pharmaceuticals

Titrimetric and spectrophotometric methods are proposed for the determination of simvastatin (SMT) in bulk drug and in tablets. The methods employ bromate-bromide mixture in acid medium as the brominating agent and iron (III) and thiocyanate as auxiliary regents. In titrimetry, SMT is treated with a measured excess of bromate-bromide mixture in HCl medium, and after a definite time, the unreacted bromine is determined iodometrically. In spectrophotometric method, the residual bromine is reduced by iron (II) and the resulting iron (III) is complexed with thiocyanate, and the absorbance is measured at 470 nm. In both methods, the amount of in situ generated bromine corresponds to the SMT content. The experimental conditions are optimized. Titrimetry is applicable over 1–10 mg range and the calculations are based on the molar ratio of 1: 0.666 (SMT: KBrO3). In spectrophotometric method, Beer’s law is obeyed over the concentration range 1–10 µg/mL. The calculated molar absorptivity is 3.02 × 10⁴ L/mol cm and the corresponding sandel sensitivity being 0.0081 µg/cm². The limit of detection (LOD) and limit of quantification (LOQ) are calculated to be 0.10 and 0.31 µg/mL, respectively. The intra-day and inter-day precision calculated from the analysis of pure SMT were less than 2 and 2.7%, respectively. The methods were satisfactorily applied to the determination of SMT in tablets, and no interferences from common tablet excipients were observed. The validity of the methods was further ascertained by parallel assay by an established technique and by recovery studies.     

Use of hydroxylamine hydrochloride in the titrimetric determination of manganese in pyrolusite

A procedure is described for the determination of total manganese in pyrolusite. The sample is decomposed with hydroxylamine hydrochloride solution. The residue left after filtration is fused with sodium carbonate and extracted again with hydroxylamine hydrochloride solution. A suitable aliquot is titrated with EDTA at pH 10, with Eriochrome Black T as indicator, after masking of interfering elements.     

A simple spectrophotometric method for the determination of nylidrin hydrochloride, isoxsuprine hydrochloride and salbutamol sulphate in pharmaceutical preparations

A simple spectrophotometric method for the determination of nylidrin hydrochloride, isoxsuprine hydrochloride and salbutamol sulphate is described, based on measurement of the orangeyellow species produced when the drugs are coupled with diazotized benzocaine (p-aminoethyl benzoate) in trimethylamine medium. The method is applicable over the range 1-12 mug ml for isoxsuprine hydrochloride and nylidrin hydrochloride and 1-8 mug ml for salbutamol sulphate. The method is a modification of the Bratton-Marshall reaction and is simple, reproducible, accurate and more sensitive than those cited in the literature.     

Determination of biguanide groups in polyhexamethylene biguanide hydrochloride by titrimetric methods.

The biguanide concentration of polyhexamethylene biguanide hydrochloride (PHMB-HCl) was measured by non-aqueous titration with HClO4, argentometric titration, the Kjeldhal method, and colloidal titration. The summation value of non-aqueous titration and argentometric titration corresponded to two titrable nitrogens in five nitrogens per one unit of PHMB-HCl, and consisted with the result of the Kjeldhal method to the five nitrogens. The colloidal titration of PHMB-HCl at pH 2.05 was equal to that with the two nitrogens. The relative standard deviations of non-aqueous titration, argentometric titration, the Kjeldhal method, and colloidal titration were 0.50% for 8 runs, 0.13% for 7 runs, 3.61% for 6 runs, and 0.69% for 6 runs, respectively.     

流动注射光度法测定药物中的盐酸氯丙嗪

在pH 4.04的HAc-NaAc缓冲液中, 刚果红与盐酸氯丙嗪在室温下迅速结合生成缔合物, 且缔合物在480 nm处有最大吸收. 基于此建立了流动注射光度法测定药物中盐酸氯丙嗪的含量. 方法线性范围为0.25～50.0 μg/mL, 检出限为0.082 μg/mL, 测定频率达80次/h.     

Stability-indicating assay for pivmecillinam hydrochloride and pivmecillinam hydrochloride capsules.

A high-pressure liquid chromatographic assay has been developed for pivmecillinam hydrochloride and pivmecillinam hydrochloride capsules. The method separates five reported degradation products and a number of esterified, related compounds. The accuracy of this method is comparable to the published ultraviolet assay and the relative standard deviation of a series of six replicate assays was better than +/- 0.7%.     

NMR assay of ephedrine hydrochloride in tablets

A rapid NMR method is described for the determination of ephedrine hydrochloride. The relative standard deviations are 1.5% and 1.2% for the pure drug and tablets respectively. The results for synthetic mixtures and tablets are comparable to those obtained by the B.P. 1973 method. In addition, the NMR spectrum furnishes a specific means of identification of ephedrine.     

A validated HPLC method for assay of morphine hydrochloride and hydromorphone hydrochloride in pharmaceutical injections

Summary A sensitive and rapid routine HPLC method is proposed for quantitative estimation of morphine hydrochloride and hydromorphone hydrochloride in pharmaceutical dosage forms. The drugs were chromatographed on a C₁₈ reversed-phase column; the mobile phase was acetonitrile-water, 35:65 (v/v), containing sodium dodecyl sulphate (0.5%, w/v), as ion pairing reagent, and acetic acid (0.4% v/v). Detection was at 230 nm. The optimized method was validated and linearity (r>0.999), precision, and accuracy were found to be acceptable within the concentration ranges 86–124 μg mL⁻¹ for morphine hydroloride and 60–180 μg mL⁻¹ for hydromorphone hydrochloride. The method is being used to investigate the stability of morphine hydrochloride and hydromorphone hydrochloride in solution used for intramuscular injection.     

Electrochemical characterisation of nefazodone hydrochloride and voltammetric determination of the drug in pharmaceuticals and human serum

Nefazodone, an antidepressant was electrochemically studied in various buffer systems and at different pH using glassy carbon electrode. Nefazodone was electrochemically oxidized at all pH values. According to the linear relation between the peak current and the nefazodone concentration differential pulse (DPV) and square wave (SWV) voltammetric methods for its quantitative determination in pharmaceuticals and human serum were developed. For analytical purposes, a very well resolved diffusion controlled voltammetric peak was obtained in 0.1 M H₂SO₄ at 0.99 and 1.03 V for DPV and SWV techniques, respectively. The linear response was obtained in the ranges of 8×10⁻⁷ to 6×10⁻⁴ M with a detection limit of 2.1×10⁻⁷ M for DPV and 1.17×10⁻⁷ M for SWV techniques. The repeatability and reproducibility of the methods were within 1.03, 0.81% relative standard deviations (R.S.D.) for peak currents and 0.40, 0.20% R.S.D. for peak potentials, for DPV and SWV, respectively. Precision and accuracy of the developed method was checked by recovery studies. The proposed methods were successfully applied to the individual tablet dosage form and human serum.     

气相色谱法检测盐酸氟西汀原料中氯仿和正己烷残留量

采用气相色谱法检测盐酸氟西汀原料中CHCl3和正己烷残留量。色谱柱:DB-17(50%二苯基/50%甲基硅氧烷,0.25mm i.d.×30m,0.25μm);载气:H2(30mL/min),AIR(350mL/min),Make up Const col(N2):35 mL/min;进样口温度:250℃;检测器温度:250℃;柱温:60℃;不分流模式;Split柱流速:2mL/min;进样量:1μL。正己烷在157.2~393.0ng范围内,CHCl3在5.88~117.6ng范围内,峰面积与浓度之间线性性关系良好。检出限:信噪比3∶1时,正己烷LOD:2.62ng;CHCl3LOD:2.94ng。定量限:信噪比10∶1时,正己烷LOQ:2.62ng;CHCl3LOQ:5.88ng。正己烷、氯仿理论塔板数分别为171513、206764。本法可检测盐酸氟西汀原料中有机溶剂残留量,为其质量控制提供依据。     

Spectrophotometric and titrimetric determination of catecholamines

Ammonium metavanadate is used to determine adrenaline, noradrenaline, isopropylnoradrenaline and methyldopa by titrimetric and photometric procedures. Oxidation of these catecholamines produces aminochrome derivatives which can be measured spectrophotometrically at 485 nm. Beer's law is obeyed over the ranges 0.09-0.90 mg for adrenaline, 0.07-0.65 mg for noradrenaline, 0.07-0.75 mg for isopropylnoradrenaline and 0.10-0.95 mg for methyldopa.     

Application of solid-state 35Cl NMR to the structural characterization of hydrochloride pharmaceuticals and their polymorphs

Solid-state (35)Cl NMR (SSNMR) spectroscopy is shown to be a useful probe of structure and polymorphism in HCl pharmaceuticals, which constitute ca. 50% of known pharmaceutical salts. Chlorine NMR spectra, single-crystal and powder X-ray diffraction data, and complementary ab initio calculations are presented for a series of HCl local anesthetic (LA) pharmaceuticals and some of their polymorphs. (35)Cl MAS SSNMR spectra acquired at 21.1 T and spectra of stationary samples at 9.4 and 21.1 T allow for extraction of chlorine electric field gradient (EFG) and chemical shift (CS) parameters. The sensitivity of the (35)Cl EFG and CS tensors to subtle changes in the chlorine environments is reflected in the (35)Cl SSNMR powder patterns. The (35)Cl SSNMR spectra are shown to serve as a rapid fingerprint for identifying and distinguishing polymorphs, as well as a useful tool for structural interpretation. First principles calculations of (35)Cl EFG and CS tensor parameters are in good agreement with the experimental values. The sensitivity of the chlorine NMR interaction tensor parameters to the chlorine chemical environment and the potential for modeling these sites with ab initio calculations hold much promise for application to polymorph screening for a wide variety of HCl pharmaceuticals.     

Chemometric optimization of a SIA promethazine hydrochloride assay method

A sequential injection analysis (SIA) method for the assay of promethazine hydrochloride, based on its oxidation by acidified cerium(IV), was optimized. Three chemometric approaches were applied: (i) factorial design (3³ applied to surface plot and 2³ applied to effect factor) for screening the potential interacting variables, (ii) univariant for optimizing insignificantly interacting variables and (iii) simplex for optimizing potentially interacting variables. The optimum experimental conditions were 30 μl of 0.38 mol/l sulphuric acid, 30 μl of 3.99 × 10^− 3 mol/l cerium(IV), 20 μl of promethazine hydrochloride and 20 μl/s flow rate. The detection limit was 7.032 × 10^− 5 mol/l and the calibration curve was linear up to 1.563 mol/l with a correlation coefficient 0.9998, accuracy range of 89.0-101.5%, relative standard deviation 1.1% (n = 10) and sample frequency at least 20 samples/h. The method was applied to tablet form and validated with the British Pharmacopoeia method. The developed SIA method is fully automated, reproducible, sensitive, rapid and reagent-saving, and therefore suitable for routine control in tablets form.     

Development and publication of new titrimetric methods

Requirements are laid down for the development of titrimetric methods and for writing up the work for publication. The general principles of various types of titration reaction are discussed, and special attention is paid to the parameters which influence chemical reactions.     

Adsorptive stripping voltammetric assay of phenazopyridine hydrochloride in biological fluids and pharmaceutical preparations

A sensitive method for the measurement of phenazopyridine hydrochloride (PAP) by differential pulse polarography (DPP) based on adsorptive stripping technique, using a hanging mercury drop electrode (HMDE) is described. The voltammetric peak is obtained at -0.760 V, which corresponds to the reduction of the azo group in Britton-Robinson buffer. The redox behaviour is reversible. Optimum conditions were found to be: accumulation potential -50 mV (vs. Ag/AgCl), accumulation time 60 s, scan rate 5 mV s(-1), pulse amplitude -100 mV and supporting electrolyte Britton-Robinson buffer (0.04 M, pH=11). The relative standard deviation (at 20 ng ml(-1) level) was +/-0.6% for six measurements. The calculated detection limit was 0.0299 ng ml(-1) with a 60-s accumulation time. The applicability of such a method was evaluated through the assay of PAP in human plasma and urine samples after a simple extraction procedure and in pharmaceutical preparation. The mean recovery was 97+/-2 (100 ng ml(-1) plasma).