Photochemical arene exchange in the naphthalene complex [CpRu(η<Superscript>6</Superscript>-C <Subscript>10</Subscript>H<Subscript>8</Subscript>)]<Superscript>+</Superscript>

The cation [CpRu(η⁶-C₁₀H₈)]⁺ was shown to exchange naphthalene for other arenes under visible-light irradiation to form the complexes [CpRu (η⁶-arene)]⁺ (arene = C₆H₆, 1,4-C₆H₄Me₂, 1,3,5-C₆H₃Me₃, or 1,2,4,5-C ₆H₂Me₄) in 70–95% yields. The reaction rate of exchange decreases in the series arene = 1,4-C₆H₄Me₂ > C₆H₆ > 1,3,5-C₆H₃Me₃ > 1,2,4,5-C ₆H₂Me₄ >> C₆Me₆ and increases with the coordinating ability of the solvent in the order CH₂Cl₂ < THF—CH₂Cl₂ mixture (1: 1) < acetone.     

Experimental Determination of the Isotherm at 15°C of the System Mg<Superscript>2+</Superscript>/Cl<Superscript>−</Superscript>, SO<Subscript>4</Subscript><Superscript>2</Superscript>–H<Subscript>2</Subscript>O

Summary.  The diagram of the ternary system Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O was established at 15°C by means of analytical and conductimetric measurements. Three compounds were found in this diagram, which are MgSO₄·6H₂O, MgSO₄·7H₂O, and MgCl₂·6H₂O. The solubility field of MgSO₄·7H₂O is important whereas those of MgSO₄·6H₂O and MgCl₂·6H₂O are small. The compositions (mass-%) of the two invariant points determined by the two methods are: MgSO₄:MgCl₂=2.73:33.80 and MgSO₄: MgCl₂=3.38:28.91. Both the measured and the calculated isotherm at 15°C have been used for modelling of the diagram Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O between 0 and 35°C. The polythermal invariant point was approximately located between 15 and 10°C.  Corresponding author. E-mail: ariguib@planet.tn Received October 16, 2002; accepted (revised) December 3, 2002 Published online April 24, 2003 RID="a" ID="a" Dedicated to Prof. Dr. Heinz Gamsj?ger on the occasion of his 70^th birthday     

Thermal arene exchange in the naphthalene complex [CpRu(η<Superscript>6</Superscript>-C<Subscript>10</Subscript>H<Subscript>8</Subscript>)]<Superscript>+</Superscript>

Naphthalene in the [CpRu(⁶−C₁₀H₈)]⁺ complex (1) is substituted for other arenes under reflux in 1,2-dichloroethane to form the [CpRu(⁶-arene)]⁺ cations (arene = C₆H₆, 1,2-C₆H₄Me₂, 1,2,4,5-C₆H₂Me₄, or C₆Me₆) in 70–80% yields. The reaction is accelerated in the presence of a catalytic amount of acetonitrile. The structure of [1]PF₆ was established by X-ray diffraction.     

Platinum–Ruthenium Cluster Complexes from the Reaction of Ru<Subscript>3</Subscript>(CO)<Subscript>12</Subscript> with Pt(PBu<Superscript>t</Superscript><Subscript>3</Subscript>)<Subscript>2</Subscript>

Three new platinum–ruthenium complexes: Pt₃Ru₃(PBu^t ₃)₃(CO)₁₂, 8, Pt₅Ru₃(PBu^t ₃)₃(CO)₁₂, 9 and PtRu₃(PBu^t ₃)₂(CO)₈(μ₃-PBu^t)(μ-H)₂, 10 were obtained from the reaction of Ru₃(CO)₁₂ with Pt(PBu^t ₃)₂. Compound 8 was obtained from this reaction when conducted at 25 °C. Compounds 9 and 10 were obtained when the reaction was conducted at 68 °C. The structure of 8 consists of a central triangular cluster of three ruthenium atoms with one Pt(PBu^t ₃) group bridging each of the three Ru–Ru bonds. The structure of 9 consists of a capped pentagonal bipyramidal cluster of eight metal atoms that is formed formally by the addition of two platinum atoms to 8. The structure of 10 contains a triangular cluster of three ruthenium atoms with a Pt(PBu^t ₃) group bridging one of the Ru–Ru bonds. A t-butyl phosphido ligand formed by degradation of a molecule of PBu^t ₃ bridges the three ruthenium atoms. This report is dedicated to the memory of Professor F. A. Cotton for his many pioneering contributions to inorganic and metal cluster chemistry.     

Mercury complex [(HOCH<Subscript>2</Subscript>)<Subscript>3</Subscript>CNH<Subscript>3</Subscript>]<Stack><Subscript>2</Subscript><Superscript>+</Superscript></Stack> [HgI<Subscript>4</Subscript>]<Superscript>2−</Superscript>: Synthesis and structure

The complex [(HOCH₂)₃CNH₃] ₂ ⁺ [HgI₄]^2? (I) was synthesized by reacting (trioxymethyl)methylammonium iodide with mercury dioide (2: 1 mol/mol) in acetone. X-ray crystallography shows that the complex consists of two types of crystallographically independent [(HOCH₂)₃CNH₃]⁺ cations and tetrahedral anions [HgI₄]^2? (IHgI, 106.49(2)°–113.99(4)°; Hg-I, 2.7849(8)-2.8105(8) Å. [(HOCH₂)₃CNH₃]⁺ cations are linked via hydrogen bonds O…H-N and O-H…N (O…N, 2.84–2.92 Å) to form polymer chains, which are cross-linked with one another via anions (I…H, 2.81, 2.82 Å).     

Structure of sulfanilamide-containing cobalt(III) dioximates with the [ZrF<Subscript>6</Subscript>]<Superscript>2−</Superscript> and [BF<Subscript>4</Subscript>]<Superscript>−</Superscript> anions

The complexes [Co(DH)₂(Sam)₂]₂[ZrF₆]·5H₂O (I) and [Co(DH)₂(Sam)₂][BF₄]·H₂O (II), where DH^? is the dimethylglyoxime monoanion, and Sam is para-aminobenzenesulfamide (sulfanilamide, white streptocid), were synthesized, and their crystal structures were determined by X-ray diffraction analysis. The coordination polyhedron of the Co³⁺ atom is an N₆ octahedron formed by four nitrogen atoms of the two dimethylglyoxime residues and two nitrogen atoms of the Sam fragments. The latter are realized in virtually parallel orientation relative to the polyhedron of the metal atom and its equatorial plane; the average value of the dihedral angles is 26.8(1)°, and there is π-π interaction between the benzene rings of the Sam fragments and the π delocalized equatorial metallocycle. The deviation of the cobalt atom from the four-angle plane is up to 0.009(1) Å. The (Co-N)_DH? and (Co-N)_Sam distances in the [Co(DH)₂(Sam)₂]⁺ complex cations vary from 1.892(2) Å to 1.907(3) Å and from 2.000(2) Å to 2.012(2) Å, respectively. The [ZrF₆]^2? and [BF₄]^? complex anions play the major role in crystal formation; they produce a substantial effect on the formation of a complex system of hydrogen bonds.     

Chemical Bonding in the Complexes XeF<Stack><Subscript>5</Subscript><Superscript>+</Superscript></Stack>XF<Stack><Subscript>6</Subscript><Superscript>−</Superscript></Stack> (X = P,As, Sb,and Bi)

Ab initio quantum-chemical calculations of the complexes XeF ₅ ⁺ XF ₆ ^? (X = P, As, Sb, and Bi) were performed with the use of relativistic pseudopotentials for heavy atoms and full-electron basis sets. The chemical bonds were characterized by the parameters of critical points (electron density, its Laplacian, total electron energy, and its kinetic and potential components). It was demonstrated that the interaction between the XeF ₅ ⁺ cation and the XF ₆ ^? anion in XeF ₅ ⁺ XF ₆ ^? follows a key-lock scheme involving directed interactions of bridging fluorine atoms F_b → Xe and that the structuring function of the lone electron pair of the Xe atom is to compensate the destabilizing electrostatic interaction between the Xe and X atoms bearing excess positive charges.     

Synthesis and Structure of the bismuth complex [Ph<Subscript>3</Subscript>PrP]<Stack><Subscript>4</Subscript><Superscript>+</Superscript></Stack>[Bi<Subscript>4</Subscript>I<Subscript>16</Subscript>]<Superscript>4−</Superscript>

The complex [Ph₃P] ₄ ⁺ [Bi₄I₁₆]^4? · 2 Me₂C=O (I) was synthesized by the reaction of triphenyl(propyl)phosphonium iodide with bismuth iodide in acetone. The crystal structure of complex I was determined by X-ray crystallography. It contains, in addition to solvent molecules, two types of crystallographically independent tetrahedral tetraphenyl(propyl)phosphonium cations and tetranuclear anions [Bi₄I₁₆]^4? in a chair conformation with the bismuth atoms being in an octahedral coordination. The Bi-I distances in the anion vary within 2.8768(4)–3.2524(4) Å.     

Synthesis and structure of novel coordination compounds based on [Re<Subscript>6</Subscript>Q<Subscript>8</Subscript>(CN)<Subscript>6</Subscript>]<Superscript>4–</Superscript> (Q = S,Se) and (SnMe<Subscript>3</Subscript>)<Superscript>+</Superscript>

The reactions of SnMe₃Cl with salts of the cluster anionic complexes [Re₆Q₈(CN)₆]^4? (Q = S, Se) gave novel complexes [{(SnMe₃)₂(OH)}₂{SnMe₃}₂{Re₆S₈(CN)₆}] (I), (Me₄N)₂[{SnMe₃(H₂O)}₂{Re₆Se₈(CN)₆}] (II), [{(SnMe₂)₄(μ₃-O)}₂{Re₆Se₈(CN)₆}] (III), and [(SnMe₂)₄(μ₃-O)₂(μ₂-OH)₂(H₂O)₂][{SnMe_{3 2}{Re₆Se₈(CN)₆}] (IV). The structures of I–IV were determined by X-ray diffraction. Compounds I, IV have the chain structures with the CN-SnMe₃-NC bridges between the cluster anions [Re₆Q₈(CN)₆]^4?. Compound II contains isolated fragments {SnMe₃(H₂O)}₂{Re₆Se₈(CN)₆}^2?. In the polymer framework of compound III, the cluster anionic complexes [Re₆Se₈(CN)₆]^4? are bound by the complex cations [(SnMe₂)₄(μ₃-O)₂]⁴⁺ formed due to the hydrolysis of the initial (SnMe₃)Cl.     

Framework coordination polymer based on the [Re<Subscript>3</Subscript>Mo<Subscript>3</Subscript>S<Subscript>8</Subscript>(CN)<Subscript>6</Subscript>]<Superscript>6–</Superscript>heterometallic cluster anions and Cd<Superscript>2+</Superscript> cations

A new coordination polymer, [Cd(NH₃)₄]₂{Cd[Re₃Mo₃S₈(CN)₆]}·1.5H₂O (I), was prepared by the reaction between solutions of Cd(CH₃COO)₂ · 2H₂O in aqueous ammonia and CaK₄[Re₃Mo₃S₈(CN)₆] · 8H₂O in water. The crystals are cubic, space group Fm3m (Prussian blue structural type); a = 15.0268(4) Å (CIF file CSD no. 431555). According to ESR data, compound I is paramagnetic, g-factor is 2.298. Thermal stability investigation by TGA and powder X-ray diffraction showed that elimination of coordinated NH₃ molecules is accompanied by sample amorphization.     

Synthesis and Characterization of the Face-Centered Cubic Clusters [(Me<Subscript>3</Subscript>tacn)<Subscript>8</Subscript>M<Subscript>8</Subscript>Pt<Subscript>6</Subscript>(CN)<Subscript>24</Subscript>]<Superscript>12+</Superscript> (M = Cr,Mo)

Incorporation of a 5d transition metal into the face-centered cubic metal-cyanide cluster geometry is accomplished for the first time with the isolation of a series of compounds featuring [(Me₃tacn)₈M₈Pt₆(CN)₂₄]¹²⁺ (M = Cr, Mo) clusters. Reaction of [(Me₃tacn)Cr(CN)₃] and K₂[PtCl₄] in a boiling aqueous solution generates [(Me₃tacn)₈Cr₈Pt₆(CN)₂₄]Cl₁₂ · 27H₂O (1), wherein Pt^II centers reside at the face-centering sites and the cyanide ligands have reoriented to give Pt^II–C≡N–Cr^III linkages. The cyclic voltammogram obtained for a solution of 1 in DMSO exhibits a quasireversible reduction event centered at E _1/2 = ?1.59 V versus Cp₂Fe^0/1+. Reaction of 1 with K₂[Pt(CN)₄] in aqueous solution affords [(Me₃tacn)₈Cr₈Pt₆(CN)₂₄][Pt(CN)₄]₆ · 6H₂O (2), in which each face of the cubic cluster is capped by a staggered tetracyanoplatinate anion with a Pt–Pt separation of 3.1552(7) Å. Attempts to perform analogous cluster-forming reactions with [(Me₃tacn)Mo(CN)₃] revealed a tendency toward cluster decomposition to give mixtures of insoluble products, including [(Me₃tacn)₈Mo₈Pt₆(CN)₂₄][Pt(CN)₄]₆ · 46H₂O (3) and [(Me₃tacn)₈Mo₈Pt₆(CN)₂₄][Pt(CN)₄]_2.5[Pt(CN)₃Br]₂Br₃ · 6H₂O (4). Crystallographic analyses revealed these compounds to contain the anticipated [(Me₃tacn)₈Mo₈Pt₆(CN)₂₄]¹²⁺ cluster in fully- and partially-capped forms, respectively. Unfortunately, the insolubility of these molybdenum-containing products precluded characterization of the cluster by cyclic voltammetry.     

Study on the thermal behavior of the complexes of the type [PdX<Subscript>2</Subscript>(tdmPz)] (X = Cl<Superscript>−</Superscript>, Br<Superscript>−</Superscript>, I<Superscript>−</Superscript>, SCN<Superscript>−</Superscript>)

Four new mononuclear Pd(II) complexes of the type [PdX₂(tdmPz)] {X = Cl⁻ (1); Br⁻ (2); I⁻ (3); SCN⁻ (4); tdmPz = 1-thiocarbamoyl-3,5-dimethylpyrazole} have been synthesized and characterized by elemental analysis, IR spectroscopy, ¹H and ¹³C{¹H}-NMR experiments. The thermal behavior of the complexes 1–4 has been investigated by means of thermogravimetry (TG) and differential thermal analysis (DTA). From the initial decomposition temperatures, the thermal stability of the complexes can be ordered in the sequence: 3 < 4 ≡ 2 < 1. The final products of the thermal decompositions were characterized as metallic palladium by X-ray powder diffraction.     

Sb(III) fluoride complexes with DL-valine. Crystal structure of molecular complex SbF<Subscript>3</Subscript>{(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>CHCH(<Superscript>+</Superscript>NH<Subscript>3</Subscript>)COO<Superscript>−</Superscript>}

Preparative method in combination with X-ray diffraction and IR spectroscopy is used to study reaction of Sb(III) fluoride with -aminoisovaleric acid (DL-valine) in an aqueous solution in the range of the molar ratios of components (0.25–2) : 1 in the presence of hydrofluoric acid. The molecular complex of Sb(III) fluoride with valine (1 : 1) of the composition SbF₃{(CH₃)₂CHCH(⁺NH₃)COO^–}(I) and valinium tetrafluoro-antimonate(III) monohydrate {(CH₃)₂CHCH(₊NH₃)COOH}SbF₄· H₂O (II) are synthesized for the first time. Crystal structure was determined for the molecular complex I consisting of SbF₃ groups and valine molecules united into polymer chains through bidentate bridging carboxylate groups of amino acid molecules.Translated from Koordinatsionnaya Khimiya, Vol. 31, No. 2, 2005, pp. 125–131.Original Russian Text Copyright © 2005 by Zemnukhova, Davidovich, Udovenko, Kovaleva.     

Interaction of [В<Subscript>10</Subscript>H<Subscript>10</Subscript>]<Superscript>2–</Superscript> and [В<Subscript>12</Subscript>H<Subscript>12</Subscript>]<Superscript>2–</Superscript> with nitro compounds

The interaction of the [B₁₀H₁₀]^2– and [B₁₂H₁₂]^2– anions with aliphatic and aromatic nitro compounds (RNO₂, where R = Et, n-Pr, i-Pr, tert-Bu, Ph) has been studied under irradiation with visible and UV light. It has been shown that, depending on the reaction conditions, both mono- and disubstituted nitro-closo-decaborates can be selectively obtained in yields up to 50%.     

Structures of the complex ions [CuCl<Subscript>4</Subscript>]<Superscript>2−</Superscript> and [CuCl<Subscript>5</Subscript>]<Superscript>3−</Superscript>

The electronic structures of the complex ions [CuCl₄]^2? and [CuCl₅]^3? were analyzed in terms of the extended angular overlap model (AOM) with consideration to sd and pd mixing. The total antibonding orbital energies of these ions show no anomalies in the transition from a tetrahedron to a planar square [CuCl₄]^2? and from a trigonal bipyramid to a tetragonal pyramid [CuCl₅]^3?. Presumably, the existence of numerous intermediate forms of these complexes is mainly due to the packing effects rather than the electronic factors.     

Structural investigation of salts containing ions [Pd(NH<Subscript>3</Subscript>)<Subscript>4</Subscript>]<Superscript>2+</Superscript> and [IrF<Subscript>6</Subscript>]<Superscript>2–</Superscript>

Double complex salts (DCS) α-[Pd(NH₃)₄][IrF₆]·H₂O (P2₁/m, a = 6.3181(3) Å, b = 10.8718(5) Å, с = 7.4526(4) Å, β = 103.568(2)°), β-[Pd(NH₃)₄][IrF₆]·H₂O (P2₁/с, a = 8.5773(3) Å, b = 10.8791(4) Å, с = = 12.6741(3) Å, β = 122.497(2)°), [Pd(NH₃)₄]₃[IrF₆]₂Cl₂·H₂O (P-1, a = 7.6080(2) Å, b = 7.6274(2) Å, с = 11.8070(3) Å, β = 122.497(2)°), and [Pd(NH₃)₄]₂[IrF₆]NO₃ (Fm-3m, a = 11.21210(10) Å) have been synthesized and structurally characterized for the first time. The existence of polymorphs for the DCS has been revealed. The influence of the chemical composition of the initial reagents on the reaction course and, respectively, the products, has been demonstrated. A hypothesis on the influence of the second coordination sphere on the formation of one or the other polymorph of the DCS has been suggested. It has been shown that the series α-[Pd(NH₃)₄][МF₆]·H₂O (M = Pt, Pd) exhibits isostructurality.     

Routes to Higher Nuclearity Mixed-Metal Carbonyl Clusters Using the [Rh(η<Superscript>5</Superscript>-C<Subscript>5</Subscript>Me<Subscript>5</Subscript>)(NCMe)<Subscript>3</Subscript>]<Superscript>2+</Superscript> Dication as a Building Block

Reaction of the [Rh(η⁵-C₅Me₅)(NCMe)₃]²⁺ (1) dication with the hexaosmium [Os₆(CO)₁₇]²⁻ (2) dianion leads to the initial formation of [Os₆(CO)₁₇Rh(η⁵-C₅Me₅)] (3). This cluster readily adds CO to form [Os₆(CO)₁₈Rh(η⁵-C₅Me₅)] (4) which has been characterised crystallographically. 3 also adds dihydrogen to give [Os₆H₂(CO)₁₇Rh(η⁵-C₅Me₅)] (5) and undergoes a substitution reaction with PPh₃ to form [Os₆(CO)₁₆(PPh₃)Rh(η⁵-C₅Me₅)] (6). With the [Ru₆(CO)₁₈]²⁻ (7) dianion, [Rh(η⁵-C₅Me₅)(NCMe)₃]²⁺ (1) reacts to form three mixed-metal clusters [Ru₅(CO)₁₅Rh(η⁵-C₅Me₅)] (8), [Ru₆(CO)₁₈Rh(η⁵-C₅Me₅)] (9) and [Ru₆(CO)₁₈Rh₂(η⁵-C₅Me₅)₂] (10). The clusters have been characterised spectroscopically and the structures of 8 and 10 have been confirmed crystallographically. The cluster 8 undergoes a substitution reaction with P(OMe)₃ to form the disubstituted product [Ru₅(CO)₁₃(P(OMe)₃)₂Rh((η⁵-C₅Me₅)] (11) which has also been characterised crystallographically.