Synthesis and characterization of the monomeric imides Ar'MNAr' ' (M = Ga or In; Ar' or Ar' ' = terphenyl ligands) with two-coordinate gallium and indium

Reaction of Ar'MMAr' (M = Ga or In) with N3Ar' ' (Ar' = C6H3-2,6-Dipp2, Dipp = C6H3-2,6-Pri2, Ar' ' = C6H3-2,6(Xyl-4-But)2) afforded the first monomeric imides of heavier group 13 elements with two-coordinate metals. Planar, trans-bent structures with short M-N bond distances were observed, which are consistent with lone pair character at both M and N and a bond order less than the formally expected triple one.     

The "diindene" ArInInAr (Ar = C(6)H(3)-2,6-Dipp(2), Dipp = C(6)H(3)-2,6-Pr(i)(2)). Dimeric versus monomeric in(I) aryls: para-substituent effects in terphenyl ligands

The synthesis and structure of a "diindene" with significant metal-metal bonding are described. It has an In-In distance of 2.9786(5) A, an In-In-C angle of 121.23(6) degrees , and an In-In bond order that is probably less than unity.     

Structures,bonding, and reaction chemistry of the neutral organogallium(I) compounds (GaAr)n(n = 1 or 2) (Ar = terphenyl or related ligand): an experimental investigation of Ga-Ga multiple bonding

The synthesis, structure, and properties of several new organogallium(I) compounds are reported. The monovalent compounds GaAr* (Ar* = C(6)H(3)-2,6-Trip(2), Trip = C(6)H(2)-2,4,6-Pr(i)()(3), 1), GaAr# (Ar# = C(6)H(3)-2,6(Bu(t)Dipp)(2), Bu(t)Dipp = C(6)H(2)-2,6-Pr(i)(2)-4-Bu(t)(), 4), and the dimeric (GaAr')(2) (Ar' = C(6)H(3)-2,6-Dipp(2), Dipp = C(6)H(3)-2,6-Pr(i)(2), 6) were synthesized by the reaction of "GaI" with (Et(2)O)LiAr*, (Et(2)O)LiAr# (3), or (LiAr')(2). Compounds 1 and 4 were isolated as green crystals, whereas 6 was obtained as a brown-red crystalline solid. All three compounds dissolved in hydrocarbon solvents to give green solutions and almost identical UV/visible spectra. Cryoscopy of 1 and 6 showed that they were monomeric in cyclohexane. Crystals of 1 and 4 were unsuitable for X-ray crystal structure determinations, but an X-ray data set for 6 showed that it was weakly dimerized in the solid with a long Ga-Ga bond of 2.6268(7) A and a trans-bent CGaGaC core array. The 1,2-diiodo-1,2-diaryldigallane compounds [Ga(Ar*)I](2) (2), [Ga(Ar#)I](2) (5), and [Ga(Ar')I](2) (7) were isolated as byproducts of the synthesis of 1, 4, and 6. The crystal structures of 2 and 7 showed that they had planar ICGaGaCI core arrays with Ga-Ga distances near 2.49 A, consistent with Ga-Ga single bonding. Treatment of 1, 4, and 6 with B(C(6)F(5))(3) immediately afforded the 1:1 donor-acceptor complexes ArGa[B(C(6)F(5))(3)] (Ar = Ar*, 8; Ar#, 9; Ar', 10) that featured almost linear gallium coordination, Ga-B distances near the sum of the covalent radii of gallium and boron, as well as some close Ga...F contacts. Compound 1 also reacted with Fe(CO)(5) under ambient conditions to give Ar*GaFe(CO)(4) (11), which had been previously synthesized by the reaction of GaAr*Cl(2) with Na(2)Fe(CO)(4). Reaction of 1 with 2,3-dimethyl-1,3-butadiene afforded the compound [Ar*GaCH(2)C(Me)C(Me)CH(2)]2 (12) that had a 10-membered 1,5-Ga(2)C(8) ring with no Ga-Ga interaction. Stirring 1 or 6 with sodium readily gave Na(2)[Ar*GaGaAr*] (13) and Na(2)(Ar'GaGaAr') (14). The former species 13 had been synthesized previously by reduction of GaAr*Cl(2) with sodium and was described as having a Ga-Ga triple bond because of the short Ga-Ga distance and the electronic relationship between [Ar*GaGaAr*](2-) and the corresponding neutral group 14 alkyne analogues. Compound 14 has a similar structure featuring a trans-bent CGaGaC core, bridged by sodiums which were also coordinated to the flanking aryl rings of the Ar' ligands. The Ga-Ga bond length was found to be 2.347(1) A, which is slightly (ca. 0.02 A) longer than that reported for 13. Reaction of Ga[N(Dipp)C(Me)](2)CH, 15 (i.e., GaN(wedge)NDipp(2)), which is sterically related to 1, 4, and 6, with Fe(CO)(5) yielded Dipp(2)N(wedge)NGaFe(CO)(4) (16), whose Ga-Fe bond is slightly longer than that observed in 11. Reaction of the less bulky LiAr"(Ar"= C(6)H(3)-2,6-Mes(2)) with "GaI" afforded the new paramagnetic cluster Ga(11)Ar(4)" (17). The ready dissociation of 1, 4, and 6 in solution, the long Ga-Ga distance in 6, and the chemistry of these compounds showed that the Ga-Ga bonds are significantly weaker than single bonds. The reduction of 1 and 6 with sodium to give 13 and 14 supplies two electrons to the di-gallium unit to generate a single bond (in addition to the weak interaction in the neutral precursor) with retention of the trans-bent geometry. It was concluded that the stability of 13 and 14 depends on the matching size of the sodium ion, and the presence of Na-Ga and Na-Ar interactions that stabilize their Na(2)Ga(2) core structures.     

Au(2)Tl(2)(C(6)Cl(5))(4)].(CH(3))(2)C=O: a luminescent loosely bound butterfly cluster with a Tl(I)-Tl(I) interaction

By reaction of NBu(4)[Au(C(6)Cl(5))(2)] with TlPF(6) in acetone the complex [Au(2)Tl(2)(C(6)Cl(5))(4)].(CH(3))(2)C=O is obtained, which shows a butterfly type arrangement of metals through short Au(I)-Tl(I) and Tl(I)-Tl(I) interactions. The last one is likely to be responsible for its luminescence behavior.     

Synthesis and characterisation of selected group 14 derivatives of the 2,5-(CF3)2C6H3 (Ar) ligand

Selected group 14 tetrahalides EX(4) (E = Si, Ge or Sn; X = Cl or Br) have been reacted in various molar ratios with ArLi, where Ar = 2,5-(CF(3))(2)C(6)H(3). The compounds Ar(2)SiCl(2)1, Ar(3)SiF 3, Ar(2)Si(OH)(2)4, Ar(2)GeCl(2)7, Ar(2)Ge(Br)Ge(Br)Ar(2)8, Ar(3)SnCl 10, Ar(4)Sn 11 and Ar(3)SnBr 12 have been isolated, and characterised by single-crystal X-ray diffraction, elemental analysis and (19)F solution-state NMR spectroscopy.     

Synthesis of Pd3Tl and Pd6Tl2 complexes based on a trinuclear aryl-palladium(II) complex acting as a metallaligand toward thallium(I) through Tl-arene and Tl-I bonds

The metallaligand [(PdIL(2))(3)(C(6)Me(3)-1,3,5)] (L(2) = 4,4'-di-tert-butyl-2-2'-bipyridine = tbbpy) reacts with TlOTf to afford the complex [{(PdIL(2))(3)C(6)Me(3)-1,3,5}Tl]OTf, which exists in the solid state as a 2:1 mixture of monomer and dimer, both showing Tl(I)-I and Tl(I)-η(6)-mesitylene bonds. In solution, only the monomer is observed. Heating of toluene solutions of [(PdIL(2))(3)(C(6)Me(3)-1,3,5)] affords the dinuclear complex [(PdIL(2))(2)(C(6)HMe(3)-1,3,5)].     

Different reactivity of the heavier group 14 element alkyne analogues Ar'MMAr' (M = Ge, Sn; Ar' = C6H3-2,6(C6H3-2,6-Pri2)2) with R2NO

The reactions of the digermanium and ditin alkyne analogues Ar'MMAr' (M = Ge or Sn) with R2NO, (R2NO = Me2C(CH2)3CMe2NO or N2O), result in complete MM bond cleavage to afford the germylene :Ge(Ar')ONR2 or the germanium(II) or tin(II) hydroxides {M(Ar')(micro-OH)}2.     

Synthesis, structural characterization, and spectroscopy of the cadmium-cadmium bonded molecular species Ar'CdCdAr' (Ar' = C6H3-2,6-(C6H3-2,6-Pri2)2)

The synthesis and first structural characterization of a cadmium-cadmium bonded molecular compound Ar'CdCdAr' (Ar' = C6H3-2,6-(C6H3-2,6-Pri2)2) are reported. The existence of the Cd-Cd bond was established by 113Cd NMR spectroscopy and X-ray diffraction (Cd-Cd = 2.6257(5) A). Like its group 12 analogue Ar'ZnZnAr', DFT calculations showed that Ar'CdCdAr' had significant p-character in the Cd-Cd sigma-bonding HOMO.     

Phosphine-ligated induced formation of thallium(I) full Pt3TlPt3 sandwich versus "open-face" TlPt3 sandwich with triangular Pt3(mu2-CO)3(PR3)3 units: synthesis and structural/spectroscopic analysis of triphenylphosphine [(mu3-Tl)Pt3(mu2-CO)3(PPh3)3]+ and its (mu3-AuPPh3)Pt3 analogue

This research constitutes an operational test to assess the influence of platinum-attached phosphine ligands in the formation process of "open-face" TlPt3 or "full" Pt3TlPt3 sandwich clusters. Accordingly, the reaction of TlPF6 with triphenylphosphine Pt4(mu2-CO)5(PPh3)4, under essentially identical boundary conditions originally used to prepare (90% yield) the triethylphosphine "full" Pt3TlPt3 sandwich, [(mu6-Tl)Pt6(mu2-CO)6(PEt3)6]+ (3) ([PF6]- salt), from Pt4(mu2-CO)5(PEt3)4 was carried out to see whether it would likewise afford the unknown triphenylphosphine Pt3TlPt3 sandwich analogue of or whether the change of phosphine ligands from sterically smaller, more basic PEt3 to PPh3 would cause the product to be the corresponding unknown triphenylphosphine "open-face" TlPt3 sandwich that would geometrically resemble the known bulky tricyclohexylphosphine [(mu3-Tl)Pt3(mu2-CO)3(PCy3)3]+ sandwich (2a). Both the structure and composition of the resulting "open-face" sandwich product, [(mu3-Tl)Pt3(mu2-CO)3(PPh3)3]+ (1a) ([PF6]- salt), were unequivocally established from a low-temperature CCD X-ray crystallographic determination. The calculated Pt/Tl atom ratio (3/1) of 75%/25% is in excellent agreement with that of 72(3)%/28(5)% obtained from energy-resolved measurements on a single crystal with a scanning electron microscope. Crystals (80% yield) of the orange-red were characterized by solid-state/solution IR and variable temperature 205Tl and 31P{1H} NMR spectra; the 31P{1H} spectra provide convincing evidence that is exhibiting dynamic behavior at room temperature in CDCl3 solution. The corresponding new "open-face" (mu3-AuPPh3)Pt3 sandwich, [(mu3-AuPPh3)Pt3(mu2-CO)3(PPh3)3]+ (1b) ([PF6]- salt), was quantitatively obtained from by reaction with AuPPh3Cl and spectroscopically characterized by IR and 31P{1H} NMR spectra. A comparative geometrical evaluation of the observed steric dispositions of the platinum-attached PR3 ligands in the "open-face" (mu3-Tl)Pt3 sandwiches of (with PPh3) and the known (with PCy3) and in the known "full" Pt3TlPt3 sandwich of (with PEt3) along with the considerably different observed steric dispositions of the PR(3) ligands in the known "open-face" (mu3-AuPCy3)Pt3 sandwich of (with PCy3) and in the known "full" Pt3AuPt3 sandwich of (with PPh(3)) has been performed. The results clearly indicate that, in contradistinction to the known triphenylphosphine Pt3AuPt3 sandwich of , PPh3 and bulkier PCy3 ligands of Pt3(mu2-CO)3(PR3)3 units are sterically too large to form "full" Pt3TlPt3 sandwiches. In other words, the nature of the thallium(I) sandwich-product in these reactions is sterically controlled by size effects of the phosphine ligands. Comparative examination of bridging carbonyl IR frequencies of and with those of closely related "open-face" and "full" sandwiches provides better insight concerning the relative electrophilic capacities of Tl+, Au+, and [AuPR3]+ components in forming sandwich adducts with Pt3(mu2-CO)3(PR3)3 nucleophiles.     

Synthesis and characterization of HC[C(Me)N(C(6)H(3)-2,6-i-Pr(2))](2)MX(2) (M = Al, X = Cl, I; M = Ga, In, X = Me, Cl, I): sterically encumbered beta-diketiminate group 13 metal derivatives

A series of group 13 metal complexes featuring the beta-diketiminate ligand [[(C(6)H(3)-2,6-i-Pr(2))NC(Me)](2)CH](-) (i.e., [Dipp(2)nacnac](-), Dipp = C(6)H(3)-2,6-i-Pr(2)) have been prepared and spectroscopically and structurally characterized. The chloride derivatives Dipp(2)nacnacMCl(2) (M = Al (3), Ga (5), In (8)) were isolated in good yield by the reaction of 1 equiv of Dipp(2)nacnacLi.Et(2)O (2) and the respective metal halides. The iodide derivatives Dipp(2)nacnacMI(2) (M = Al (4), Ga (6), In (9)), which are useful for reduction to afford M(I) species, were made by a variety of routes. Thus, 4 was obtained by treatment of the previously reported Dipp(2)nacnacAlMe(2) with I(2), whereas the gallium analogue 6 was obtained as a product of the reaction of "GaI" with Dipp(2)nacnacLi.Et(2)O, and 9 was obtained by direct reaction of InI(3) and the lithium salt. The methyl derivatives Dipp(2)nacnacMMe(2) (M = Ga (7), In (10)), which are analogous to the previously reported Dipp(2)nacnacAlMe(2), were synthesized by the reaction of GaMe(3) with Dipp(2)nacnacH (1) or by reaction of the indium chloride derivative 8 with 2 equiv of MeMgBr in diethyl ether. The compounds 3-10 exist as colorless, air- and moisture-sensitive crystalline solids. Their X-ray crystal structures feature nearly planar C(3)N(2) arrays in the Dipp(2)nacnac ligand backbone with short C-C and C-N distances that are consistent with a delocalized structure. However, there are large dihedral angles between the C(3)N(2) plane and the N(2)M metal coordination plane which have been attributed mainly to steric effects. The relatively short M-N distances are consistent with the coordination numbers of the metals and the normal/dative character of the nitrogen ligands. The compounds were also characterized by (1)H and (13)C NMR spectroscopy. (1)H NMR data for 7 revealed equivalent methyl groups whereas the spectrum of 10 displayed two In-Me signals which indicated that ring wagging was slow on the (1)H NMR time scale.     

Synthesis and characterization of the homologous M-M bonded series Ar'MMAr' (M = Zn, Cd, or Hg; Ar' = C6H3-2,6-(C6H3-2,6-Pr(i)2)2) and related arylmetal halides and hydride species

The synthesis and structural characterization of the first homologous, molecular M-M bonded series for the group 12 metals are reported. The compounds Ar'MMAr' (M = Zn, Cd, or Hg; Ar' = C(6)H(3)-2,6-(C(6)H(3)-2,6-Pr(i)(2))(2)) were synthesized by reduction of the corresponding arylmetal halides by alkali metal/graphite (Zn or Hg) or sodium hydride (Cd). These compounds possess almost linear C-M-M-C core structures with two-coordinate metals. The observed M-M bonds distances were 2.3591(9), 2.6257(5), and 2.5738(3) A for the zinc, cadmium, and mercury species, respectively. The shorter Hg-Hg bond in comparison to that of Cd-Cd is consistent with DFT calculations which show that the strength of the Hg-Hg bond is greater. The arylmetal halides precursors (Ar'MI)(1 or 2), and the highly reactive hydrides (Ar'MH)(1 or 2), were also synthesized and fully characterized by X-ray crystallography (Zn and Cd) and multinuclear NMR spectroscopy. The arylzinc and arylcadmium iodides have iodide-bridged dimeric structures, whereas the arylmercury iodide, Ar'HgI, is monomeric. The arylzinc and arylcadmium hydrides have symmetric (Zn) or unsymmetric (Cd) mu-H-bridged structures. The Ar'HgH species was synthesized and characterized by spectroscopy, but a satisfactory refinement of the structure was precluded by the contamination of monomeric Ar'HgH by Ar'H. It was also shown that the decomposition of Ar'Cd(mu-H)(2)CdAr' at room temperature leads to the M-M bonded Ar'CdCdAr', thereby supporting the view that the reduction of the iodide proceeds via the hydride intermediate.     

Rhenium(I) and technetium-99m(I) fac-tricarbonyl complexes with 4-(imidazolin-2-yl)-3-thiabutanoic acid derivatives as tridentate ligands: Synthesis and structural characterization

Two rhenium(I) tricarbonyl complexes, with the monoanionic tridentate NSO type ligand, 4-(imidazolin-2-yl)-3-thiabutanoic acid and 4-(N-ethylimidazolin-2-yl)-3-thiabutanoic acid were synthesized and isolated in pure form. Both complexes were characterized by spectroscopic methods and elemental analysis. The solid-state structure of 4-(imidazolin-2-yl)-3-thiabutanoic acid and of both complexes was established by X-ray crystallography. The geometry about the rhenium is octahedral. The analogous technetium-99m complexes were also prepared quantitatively by the reaction of both ligands with the fac-[^99mTc(CO)₃(H₂O)₃]⁺ synthon and their identity was established by chromatographic comparison to their rhenium congeners.     

Tl(I), Fe(II), and Co(II) complexes supported by a monoanionic N,N,N'-heteroscorpionate ligand bis(3,5-di-tertbutylpyrazol-1-yl)-1-CH2NAr (Ar = 2,6-iPr2C6H3)

The lithium salt (L)Li(THF) (L- = bis(3,5-di-tertbutylpyrazol-1-yl)-1-CH2NAr, Ar = 2,6-iPr2C6H3) can be readily prepared from lithium bis(3,5-di-tertbutylpyrazol-1-yl)methide and the N-methyleneaniline H2C=NAr. This N,N,N'-heteroscorpionate lithium reagent can be transmetalated with Tl(OTf), FeCl2(THF)(1.5), and CoCl2 to yield the (L)Tl, (L)FeCl, and (L)CoCl complexes, respectively. Single crystal structural data for compounds (L)Li(THF), (L)Tl, (L)FeCl, and (L)CoCl reveal in each case the hapticity of the sterically demanding, monoanionic L- ligand to be kappa3-N3.     

Synthesis and reactivity of fluoro complexes: Part 2. Rhodium(I) fluoro complexes with alkene and phosphine ligands. Synthesis of the first isolated rhodium(I) bifluoride complexes. Structure of [Rh3(mu3-OH)2(COD)(3)](HF2) by X-ray powder diffraction

The reaction between [Rh(mu-OH)(COD)](2) (COD = 1,5-cyclooctadiene) and 73% HF in THF gives [Rh(3)(mu(3)-OH)(2)(COD)(3)](HF(2)) (1). Its crystal structure, determined by ab initio X-ray powder diffraction methods (from conventional laboratory data), contains complex trimetallic cations linked together in 1D chains by a mu(3)-OH...F-H-F...HO-mu(3) sequence of strong hydrogen bonds. The complex [Rh(mu-F)(COE)(2)](2) (COE = cyclooctene; 2), prepared by reacting [Rh(mu-OH)(COE)(2)](2) with NEt(3).3HF (3:2), has been characterized. Complex 1 reacts with PR(3) (1:3) to give [RhF(COD)(PR(3))] [R = Ph (3), C(6)H(4)OMe-4 (4), (i)Pr (5), Cy (6)] that can be prepared directly by reacting [Rh(mu-OH)(COD)](2) with 73% HF and PR(3) (1:2:2). The reactions of 1 with PPh(3) or Et(3)P have been studied by NMR spectroscopy at different molar ratios. Complexes [RhF(PEt(3))(3)] (7), [RhF(COD)(PEt(3))] (8), and [RhF(PPh(3))(3)] (9) have been detected. The complex [Rh(F)(NBD)(iPr(3)P)] (NBD = norbornadiene; 10) was prepared by the sequential treatment of [Rh(mu-OMe)(NBD)](2) with 1 equiv of NEt(3).3HF and (i)Pr(3)P. The first isolated bifluoride rhodium(I) complexes [Rh(FHF)(COD)(PR(3))] [R = Ph (11), (i)Pr (12), Cy (13)], obtained by reacting fluoro complexes 3, 5, and 6 with NEt(3).3HF (3:1), have been characterized. The crystal structures of 3 and 11 have been determined.     

Synthesis and reactivity of Ir(I) and Ir(III) complexes with MeNH2, Me2C=NR (R = H, Me), C,N-C6H4{C(Me)=N(Me)}-2, and N,N'-RN=C(Me)CH2C(Me2)NHR (R = H, Me) ligands

Complexes [Ir(Cp*)Cl(n)(NH2Me)(3-n)]X(m) (n = 2, m = 0 (1), n = 1, m = 1, X = Cl (2a), n = 0, m = 2, X = OTf (3)) are obtained by reacting [Ir(Cp*)Cl(mu-Cl)]2 with MeNH2 (1:2 or 1:8) or with [Ag(NH2Me)2]OTf (1:4), respectively. Complex 2b (n = 1, m = 1, X = ClO 4) is obtained from 2a and NaClO4 x H2O. The reaction of 3 with MeC(O)Ph at 80 degrees C gives [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(NH2Me)]OTf (4), which in turn reacts with RNC to give [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(CNR)]OTf (R = (t)Bu (5), Xy (6)). [Ir(mu-Cl)(COD)]2 reacts with [Ag{N(R)=CMe2}2]X (1:2) to give [Ir{N(R)=CMe2}2(COD)]X (R = H, X = ClO4 (7); R = Me, X = OTf (8)). Complexes [Ir(CO)2(NH=CMe2)2]ClO4 (9) and [IrCl{N(R)=CMe2}(COD)] (R = H (10), Me (11)) are obtained from the appropriate [Ir{N(R)=CMe2}2(COD)]X and CO or Me4NCl, respectively. [Ir(Cp*)Cl(mu-Cl)]2 reacts with [Au(NH=CMe2)(PPh3)]ClO4 (1:2) to give [Ir(Cp*)(mu-Cl)(NH=CMe2)]2(ClO4)2 (12) which in turn reacts with PPh 3 or Me4NCl (1:2) to give [Ir(Cp*)Cl(NH=CMe2)(PPh3)]ClO4 (13) or [Ir(Cp*)Cl2(NH=CMe2)] (14), respectively. Complex 14 hydrolyzes in a CH2Cl2/Et2O solution to give [Ir(Cp*)Cl2(NH3)] (15). The reaction of [Ir(Cp*)Cl(mu-Cl)]2 with [Ag(NH=CMe2)2]ClO4 (1:4) gives [Ir(Cp*)(NH=CMe2)3](ClO4)2 (16a), which reacts with PPNCl (PPN = Ph3=P=N=PPh3) under different reaction conditions to give [Ir(Cp*)(NH=CMe2)3]XY (X = Cl, Y = ClO4 (16b); X = Y = Cl (16c)). Equimolar amounts of 14 and 16a react to give [Ir(Cp*)Cl(NH=CMe2)2]ClO4 (17), which in turn reacts with PPNCl to give [Ir(Cp*)Cl(H-imam)]Cl (R-imam = N,N'-N(R)=C(Me)CH2C(Me)2NHR (18a)]. Complexes [Ir(Cp*)Cl(R-imam)]ClO4 (R = H (18b), Me (19)) are obtained from 18a and AgClO4 or by refluxing 2b in acetone for 7 h, respectively. They react with AgClO4 and the appropriate neutral ligand or with [Ag(NH=CMe2)2]ClO4 to give [Ir(Cp*)(R-imam)L](ClO4)2 (R = H, L = (t)BuNC (20), XyNC (21); R = Me, L = MeCN (22)) or [Ir(Cp*)(H-imam)(NH=CMe2)](ClO4)2 (23a), respectively. The later reacts with PPNCl to give [Ir(Cp*)(H-imam)(NH=CMe2)]Cl(ClO4) (23b). The reaction of 22 with XyNC gives [Ir(Cp*)(Me-imam)(CNXy)](ClO4)2 (24). The structures of complexes 15, 16c and 18b have been solved by X-ray diffraction methods.     

Cyclopentadienyl pentafluorophenylthiolate complexes of molybdenum and tungsten as novel polydentate ligands of thallium(I); dynamic NMR studies and crystal structures of two derivatives [MoTl(SC6F5)2L2Cp] (L = SC6F5 or CO)

New bimetallic complexes [MTl(SC₆F₅)₂L₂Cp] (L = SC₆F₅, M = Mo (1a), W (1b); L = CO, M = Mo (4)) are characterised; crystal structures of 1a and 4 show unusual polydentate coordination of thallium(I) by [Mo(SC₆F₅)₂L₂Cp)]⁻ and var. temp. ¹⁹F NMR studies, supported by conductivity measurements and cation exchange, indicate restricted rotation of C₆F₅ groups and reversible decoordination of Tl⁺ in more polar solvents.     

Involvement of a binuclear species with the Re-C(O)O-Re moiety in CO2 reduction catalyzed by tricarbonyl rhenium(I) complexes with diimine ligands: strikingly slow formation of the Re-Re and Re-C(O)O-Re species from Re(dmb)(CO)3S (dmb = 4,4'-dimethyl-2,2'-bipyridine, S = solvent)

Excited-state properties of fac-[Re(dmb)(CO)(3)(CH(3)CN)]PF(6), [Re(dmb)(CO)(3)](2) (where dmb = 4,4'-dimethyl-2,2'-bipyridine), and other tricarbonyl rhenium(I) complexes were investigated by transient FTIR and UV-vis spectroscopy in CH(3)CN or THF. The one-electron reduced monomer, Re(dmb)(CO)(3)S (S = CH(3)CN or THF), can be prepared either by reductive quenching of the excited states of fac-[Re(dmb)(CO)(3)(CH(3)CN)]PF(6) or by homolysis of [Re(dmb)(CO)(3)](2). In the reduced monomer's ground state, the odd electron resides on the dmb ligand rather than on the metal center. Re(dmb)(CO)(3)S dimerizes slowly in THF, k(d) = 40 +/- 5 M(-1) s(-1). This rate constant is much smaller than those of other organometallic radicals which are typically 10(9) M(-1) s(-1). The slower rate suggests that the equilibrium between the ligand-centered and metal-centered radicals is very unfavorable (K approximately 10(-4)). The reaction of Re(dmb)(CO)(3)S with CO(2) is slow and competes with the dimerization. Photolysis of [Re(dmb)(CO)(3)](2) in the presence of CO(2) produces CO with a 25-50% yield based on [Re]. A CO(2) bridged dimer, (CO)(3)(dmb)Re-CO(O)-Re(dmb)(CO)(3) is identified as an intermediate. Both [Re(dmb)(CO)(3)](2)(OCO(2)) and Re(dmb)(CO)(3)(OC(O)OH) are detected as oxidation products; however, the previously reported formato-rhenium species is not detected.     

Synthesis and structures of [[HC(CMeNAr)(2)]Ge(S)X] (Ar = 2,6-iPr(2)C(6)H(3), X = F,Cl, Me): structurally characterized examples with a formal double bond between group 14 and 16 elements bearing a halide

Treatment of [{HC(CMeNAr)2}GeX] (Ar = 2,6-iPr2C6H3, X = Cl (1), F (2)), with elemental sulfur at room temperature smoothly afforded the [{HC(CMeNAr)2}Ge(S)X] (X = Cl (3), F (4)). Compound 4 can also be obtained from 3 with the fluorination reagent Me3SnF. Reaction of 3 with MeLi led to the formation of [{HC(CMeNAr)2}Ge(S)Me] (5). Single-crystal X-ray structural analyses indicate compounds 3-5 are monomeric. The germanium centers adopt four coordinated sites and reside in distorted tetrahedral environment. Compounds 3 and 4 are structurally characterized examples with a formal double bond between group 14 and 16 elements bearing a halide.     

Synthesis and structures of selected triazapentadienate of Li, Mn, Fe, Co, Ni, Cu(I), and Cu(II) using 2,4-N,N'-disubstituted 1,3,5-triazapentadienate anions as ancillary ligands: [N(Ar)C(NMe2)NC(NMe2)N(R)](-) (Ar = Ph, 2,6-(i)Pr2-C6H3; R = H, SiMe3)

Addition reaction of ArN(SiMe 3)M (Ar = Ph or 2,6 - (i) Pr 2-C 6H 3 (Dipp); M = Li or Na) to 2 equivalents of alpha-hydrogen-free nitrile RCN (R = dimethylamido) gave the dimeric [M{N(Ar)C(NMe 2)NC(NMe 2)N(SiMe 3)}] 2 ( 1a, Ar = Ph, M = Li; 1b, Ar = Ph, M = Na; 1c, Ar = Dipp, M = Li). 1d was obtained by hydrolysis of 1c at ambient temperature. Treatment of a double ratio of 1a or 1b with anhydrous MCl 2 (M = Mn, Fe, Co) yielded the 1,3,5-triazapentadienato complexes [M{N(Ph)C(NMe 2)NC(NMe 2)N(SiMe 3)} 2] (M = Mn, 2; Fe, 3; Co, 4) and with NiCl 2.6H 2O gave [M{N(Ph)C(NMe 2)NC(NMe 2)N(H)} 2] (M = Ni, 5). Treatment of an equiv of 1c with anhydrous CuCl in situ and in air led to complexes [{N(Dipp)C(NMe 2)NC(NMe 2)N(SiMe 3)}CuPPh 3] 6 and [Cu{N(Dipp)C(NMe 2)NC(NMe 2)N(H)} 2] 7, respectively. 1c, 1d, and 2- 7 were characterized by X-ray crystallography and microanalysis. 1c, 1d, 5, and 6 were well characterized by (1)H, (13)C NMR, 1c by (7)Li, and 6 by (31)P NMR as well. The structural features of these complexes were described in detail.