Determination of cobalt in the presence of high concentrations of zinc by differential pulse polarography

Summary Cobalt(II) can be determined in 0.1 mol/l Na₃citrate + 0.1 mol/l NH₄Cl + 0.08% dimethylglyoxime as supporting electrolyte in the presence of a 50 000-fold excess of zinc by differential pulse polarography. The limit of determination is 4.2×10^–5 mol/l Co (2.5 mg/l). Linear calibration curves are obtained within the range of 1×10^–7 to 5×10^–6 mol/l cobalt without zinc and in the presence of 5×10^–3 mol/l Zn. The analytical method developed is suitable for the determination of cobalt in zinc plant solutions.

---

Cobaltbestimmung in Gegenwart hoher Zinkkonzentrationen mit Hilfe der Differential-Puls-Polarographie

     

Determination of Mo(VI) with 2-benzylideneiminobenzohydroxamic acid (2-BIBH) in urine by cathodic stripping voltammetry

Summary Controlled adsorptive accumulation of Mo(VI)-2-BIBH at the hanging mercury drop electrode (HMDE) provides the basis for the direct stripping measurement of Mo(VI) in nanomolar concentration. The cathodic stripping response is evaluated with respect to experimental parameters such as preconcentration time, preconcentration potential and others. A differential pulse cathodic stripping voltammetric method for the determination of Mo(VI) with 2-BIBH in urine is proposed. The detection limit is 10^–9 mol/l Mo(VI), standard deviation for 5×10^–8 mol/l is ±1.58×10^–9 mol/l.

---

Bestimmung von MolybdÄn(VI) mit 2-BenzylideniminobenzohydroxamsÄure (2-BIBH) in Harn durch kathodische Stripping-Voltammetrie

     

Spectrofluorimetric determination of benzodiazepinooxazoles

Summary A study of fluorescence properties of Cloxazolam and Oxazolam has been carried out. pK_a-values were calculated and a spectrofluorimetric method was developed in acidic hydroalcoholic medium for the determination of the drugs. The fluorescence intensity was linear with the concentration up to at least 6.00×10^–6 mol/l for Cloxazolam and 5.17×10^–6 mol/l for Oxazolam. Detection limits obtained were 2.91×10^–8 mol/l and 4.56×10^–8 mol/l for Cloxazolam and Oxazolam, respectively. Spectrofluorimetric methods were applied to the determination of both drugs in pharmaceuticals and errors lower than 2.5% were obtained. Spectrophotometric determination methods were also developed.     

Determination of traces of iron with the catalytic maximum wave in differential pulse polarography

Summary A differential pulse polarographic method for the determination of iron employing the catalytic maximum wave has been studied. A well-defined differential pulse polarographic peak for iron(III) in Britton-Robinson buffer solution containing 50 mol/l N-(2-hydroxyethyl) ethylenediamine N,N,N-triacetic acid (HEDTA) and 5 mmol/l KBrO₃ is observed in the potential range from +0.2 to –0.3 V vs. SCE. The peak current is very large compared to that of the Fe(III)/EDTA complex, being proportional to the concentration of iron(III) between 1.00×10^–8 and 3.58×10^–6 mol/l under optimum conditions. The relative standard deviations for 3.58×10^–7 mol/l and 1.79×10^–6 mol/l iron(III) were 1.38 and 0.54%, respectively (n=5), and the calculated detection limit was 5.2×10^–9 mol/l iron(III). The method has been applied to the determination of iron in fresh snow and rain waters.

---

Spurenbestimmung von Eisen mit Hilfe der katalytischen Maximumsstufe in der Differential-Puls-Polarographie

Zusammenfassung Das Verfahren beruht auf der Tatsache, daß in Britton-Robinson-Puffer (mit 50 mol/l HEDTA und 5 mmol/l KBrO₃) im Potentialbereich von +0,2 bis –0,3 V gegen SKE ein gut definierter puls-polarographischer Peak für Eisen(III) auftritt. Der Peakstrom ist im Vergleich zu dem des Fe(III)/EDTA-Komplexes sehr groß und ist unter optimalen Bedingungen im Konzentrationsbereich von 1,00·10^–8 bis 3,58·10^–6 mol/l der Eisen(III)-Konzentration proportional. Die relative Standardabweichung beträgt 1,38% bzw. 0,54% (n=5) für 3,58·10^–7 mol/l bzw. 1,79·10^–6 mol/l Fe(III). Die berechnete Nachweisgrenze liegt bei 5,2·10^–9 mol/l Fe(III). Das Verfahren wurde zur Eisenbestimmung in Schnee- und Regenwasser eingesetzt.

---

---

This work was supported in part by a Grant-in-Aid for Scientific Research from Hokkaido-prefecture, 1982.     

Determination of traces of vanadium with the catalytic maximum wave in differential pulse polarography

Summary A differential pulse-polarographic method has been studied for the determination of vanadium employing the catalytic maximum wave. A well-defined differential pulse polarographic peak is observed in the potential range from –0.2 to –0.7 V vs. SCE for vanadium(V) in 10 mmol 1^–1 NaCl containing 10 mmol 1^–1 acetic acid, 40 mmol 1^–1 pyrocatechol, and 2.5 mmol 1^–1 KBrO₃. The peak current is very large and proportional to the concentration of vanadium(V) between 1×10^–7 and 1×10^–6 mol 1^–1. The relative standard deviation at 0.5 mol l^–1 vanadium(V) was 2.06% (n=7). This method has been successfully applied to the determination of vanadium in standard materials such as pond sediment.

---

Spurenbestimmung von Vanadium mit Hilfe der katalytischen Maximumsstufe in der Differential-Puls-Polarographie

Zusammenfassung Ein gut definierter differentialpuls-polarographischer Peak wurde für Vanadium(V) in 10 mmol/l NaCl-Lösung, die 10 mmol/l Essigsäure, 40 mmol/l Brenzcatechin und 2,5 mmol/l KBrO₃ enthielt, beobachtet (Potentialbereich –0,2 bis –0,7 V gegen SCE). Der Peakstrom ist sehr groß und die Vanadiumkonzentration im Bereich von 1×10^–7 bis 1×10^–6 mol/l proportional. Die relative Standardabweichung betrug 2,06% (n=7) bei 0,5 mol/l Vanadium(V). Das Verfahren wurde mit gutem Erfolg zur Vanadiumbestimmung in Standardproben (z.B. Teichsediment) eingesetzt.

     

Polarographic study of a benzodiazepinooxazole: Oxazolam

Summary The polarographic behaviour of 10-chloro-2,3, 7,11b-tetrahydro-2-methyl-11b-phenyloxazolo-[3,2-d][1,4]-benzodiazepin-6(5H)-one (Oxazolam) was studied in the pH range 1–12. The reduction processes of Oxazolam and its hydrolysis product are irreversible and their currents are predominantly diffusion-controlled. The linear relationship between current and Oxazolam concentration in sulphuric acid medium permits its polarographic determination up to 6.08×10^–5 mol/l. The detection limit was 1.52×10^–7 mol/l (50 ppb). The reproducibility of the method in terms of relative standard deviation was 1.74% and 1.85% for ten determinations at 1.48×10^–5 mol/l and 1.37×10^–6 mol/l levels, respectively. The method developed was applied to the determination of the compound in its formulations, Hializan-10 mg, obtaining errors lower than 2%.

---

Polarographische Untersuchung eines Benzodiazepinoxazols: Oxazolam

     

Determination of sulphhydryl compounds in physiological fluids by liquid chromatography with polarographic detection

Summary A polarographic detector with a horizontal, fast dropping mercury electrode has been applied for the determination of thiols in physiological fluids. To establish suitable detection conditions first some basic studies on the polarographic behaviour of penicillamine, glutathione and cysteine were performed. This type of detection shows a high selectivity and reasonably low detection limits for sulphhydryl compounds. Detection limits of 6×10^–7 mol l^–1 for penicillamine and cysteine and 8×10^–7 mol l^–1 for glutathione were found. A good linearity has been observed over a concentration range of three orders. The detector has successfully been applied to the determination of penicillamine in urine and serum samples.

---

Bestimmung von Sulfhydrylverbindungen in physiologischen Flüssigkeiten durch Flüssigkeits-Chromatographie mit polarographischer Detektion

Zusammenfassung Ein polarographischer Detektor mit horizontaler, schnell tropfender Quecksilberelektrode wurde zur Bestimmung von Thiolen in physiologischen Flüssigkeiten angewendet. Zur Feststellung geeigneter Bedingungen wurden zunächst grundlegende Untersuchungen zum polarographischen Verhalten von Penicillamin, Glutathion und Cystein durchgeführt. Das Verfahren bietet hohe Selektivität und niedrige Nachweisgrenzen (6 · 10^–7 mol/l für Penicillamin und Cystein, 8 · 10^–7 mol/l für Glutathion). Linearität besteht über drei Größenordnungen. Der Detektor wurde mit gutem Erfolg für die Penicillaminbestimmung in Harn und Serum verwendet.

---

---

Dedicated to Prof. Dr. H. Weisz on occasion of his 60th birthday

---

On leave from the Technical University of Gdansk     

Determination of methamphetamine in urine samples with sodium 1,2-naphthoquinone-4-sulphonate

Optimal conditions have been studied for the determination of methamphetamine in urine samples by an extractive-spectrophotometric method with sodium 1,2-naphthoquinone-4-sulphonate (NQS) as reagent. These conditions are: NaHCO₃ pH 10, NQS 6.3 × 10^–3 mol/l and heating for 5 min at 45°C. The accuracy and precision of the method were tested. The detection limits were 0.2 mg/l in the standard and 0.9 mg/l when 5 ml of urine sample were taken. The standard deviation of blank urine was evaluated from 12 different samples. The relative errors found in the determination of methamphetamine in urine were lower than 10% if the methamphetamine-amphetamine ratio was higher than 4.     

Pharmacokinetic detection of penicillin excreted in urine using a totally internally reflected resonance light scattering technique with cetyltrimethylammonium bromide

A quantitative analysis method for penicillins including ampicillin (AmP), benzyl penicillin (BP), oxacillin (OA) and amoxycillin (AmO) is proposed that makes use of the totally internally reflected resonance light scattering (TIR-RLS) signal from the penicillin at the H₂O/CCl₄ interface in the presence of cetyltrimethylammonium bromide (CTMAB), and enables the pharmacokinetics of penicillin taken orally and excreted through urine to be monitored. Penicillin is coadsorbed with CTMAB at the H₂O/CCl₄ interface in neutral solution, resulting in the formation of ion associates that display greatly enhanced TIR-RLS signals (maximum at 368–372 nm). This enhanced TIR-RLS intensity was found to be proportional to the penicillin concentration over the range 0.2×10^–6 to 2.2×10^–6 mol L^–1, with limits of determination (3) of 5.0×10^–8 to 7.0×10^–8 mol L^–1. Pharmacokinetics studies performed using the present method show that the excretion of orally-taken ampicillin through urine has a half-time of 1.05 h and an excremental quantum over 8 h of 49.3%, respectively.     

Potentiometrische Cyanidbestimmung in Gegenwart von Hexacyanochromat(III)

Zusammenfassung Im Konzentrationsbereich 2 · 10^–4–3 · 10^–3 Mol/l lassen sich Cyanidionen in Gegenwart von 0,01 Mol/l [Cr(CN)₆]^3– potentiometrisch bestimmen. Als Indicatorelektrode diente eine Silberjodidmembranelektrode oder eine jodierte Silberelektrode. Zusatz von festem AgJ erhöht die Reproduzierbarkeit.

---

Potentiometric determination of cyanide in presence of hexacyanochromate(III)

2×10^–4–3×10^–3 Mol/l of cyanide can be determined in presence of 0.01 Mol/l of [Cr(CN)₆]^3–. Indicator electrode is a silver iodide membrane or an iodized silver electrode. Solid AgI is added for improved reproducibility.

---

---

Herrn Prof. H. L. Schläfer danke ich sehr für sein Interesse an dieser Arbeit.Der Deutschen Forschungsgemeinschaft danke ich für finanzielle Unterstützung.     

Die kinetische polarographische Stufe des Urans in Gegenwart von Chlorat-Ionen

An increase of the 2nd polarographic uranium(VI) wave has been observed in the presence of chlorate ions in HClO₄–NaClO₄, or HClO₄–NaClO₄–NaCl supporting electrolyte, resp. The polarographic measurements at different temperatures and at various perchloric acid concentrations show that this increase is due to a kinetic U(III)-U(IV) current. The activation parameters of the U(III)-U(IV) oxidation reaction with ClO₃ ^– have been calculated usingKautecky's method.The approximately 5fold increase of the 2nd polarographic wave allows the determination of small amounts of uranium (10^–5–10^–6 mole/l).

---

---

Mit 2 Abbildungen     

Simultaneous determination of sodium dodecyl sulphate and sodium linear-dodecylbenzenesulphonate with 1-stearyl-4-(4-aminonaphthylazo)-pyridinium bromide by spectrophotometry

A rapid and sensitive spectrophotometric method for the simultaneous determination of sodium dodecyl sulphate (SDS) and sodium linear-dodecylbenzenesulphonate (DBS) with 1-stearyl-4-(4-aminonaphthylazo)-pyridinium bromide (SAPB) is described using the difference at the maximum absorption wavelength of the SDS- and the DBS-ion associate. SDS and DBS have been determined independently by measuring their respective absorbances at the maximum absorption wavelength. The apparent molar absorptivities of the SDS- and the DBS-ion associate are 8.0×10⁴ l mol^–1 cm^–1 at 445 nm and 4.5×10⁴ l mol^–1 cm^–1 at 424 nm, respectively. The calibration graph for SDS is linear in the range from 0.1 to 1.0×10^–6 mol/l in the presence of 1.2×10^–6 mol/l DBS and for DBS from 0.8 to 2.0×10^–6 mol/l in the presence of 8.0×10^–7 mol/l SDS. The relative standard deviation (n=15) for 8.0×10^–7 mol/l SDS is 3.4% and for 1.6×10^–6 mol/l DBS 2.1%. The proposed method has been applied to the simulatenous determination of SDS and DBS in river water samples.     

Fluorescence high-performance liquid chromatography of trace microamounts of phosphate by oxidation of thiamine to thiochrome

Summary A highly sensitive fluorescence high-performance liquid chromatography, based on the fluorescence of thiochrome which is formed from oxidation of thiamine by the molybdoheteropoly acid of phosphate has been developed for the determination of trace microamounts of phosphate. The method permits the determination of phosphate in the range of 0.1 to 1.0 ng as P/10 l sample solution (3.23×10^–7 to 3.23×10^–6 mol l^–3 as P or PO₄), and it may be possible to apply the proposed method to the microanalysis of phosphate in various biological samples.

---

Fluorescenz-HPLC von Spuren-Phosphat durch Oxidation von Thiamin zu Thiochrom

     

KMnO4-OP Chemiluminescence system for FIA determination of hydrogen peroxide

A fast and simple KMnO₄-OP chemiluminescence system for flow-injection analysis of hydrogen peroxide is described. When a mixture of sample and OP is injected into acidic KMnO₄, solution in a flow-cell, strong chemiluminescence occurs. The response is linear to the concentration of hydrogen peroxide in the range of 1.0 × 10^–8 to 6.0 × 10^–5 mol/l with 0.1 mol/l permanganate, and the upper limit of linear response could be extended to 6 × 10^–3 mol/l by increasing the permanganate concentration. The relative standard deviation of the method is between 1.6 and 2.3%. The detection limit is 6.0 × 10^–9 mol/l. This method is suitable for automatic and continuous analysis and has been successfully tested for determination of hydrogen peroxide in rain water. The chemiluminescence intensity was found to be remarkably enhanced in the presence of the OP micellar system.     

New effective and selective extractants for separation and determination of silver

Summary Isopropyl-N-alkylthiocarbamates have been studied as extractants for preconcentration of silver trace amounts and for separation of silver macroquantities. It has been shown that the 0.05M reagents in chloroform extract trace amounts of silver with high distribution coefficients from HNO₃, H₂SO₄, HClO₄ and HCl solutions in wide range of their concentrations. The highest selectivity is obtained when HNO₃, H₂SO₄ or HClO₄ solutions are used. Besides silver only mercury and palladium are extracted. When HC1 solutions are used, gold is also transferred into organic phase. Isopropyl-N-alkylthiocarbamates are effective for extraction of silver from its concentrated (up to 1M) solutions, particularly from HNO₃ solutions: more than 99.9% of silver is extracted even at 2-fold reagent excess. Some characteristics of reagents themselfes have been investigated, such as dissociation, protonation, distribution between organic and aqueous phases and association in organic solvents. The thion forms are found to be predominant. Silver is extracted as coordination solvated compounds Ag(HL) _n X, where X=Cl, Br, J, NO₃. Sulfur serves as a donor atom for their formation.The procedures for silver determination in geological samples by flame atomic absorption (3×10^–7%) and atomic emission (1×10^–7%) have been developed. The procedures for atomic emission determination of 23 trace elements (5×10^–8–1×10^–5%) and for electrothermal atomic absorption determination of 17 trace elements (4×10^–9–8×10^–6%) in high purity silver have also been developed.

---

Neue wirksame und selektive Extraktionsmittel für die Trennung und Bestimmung von Silber

Zusammenfassung Isopropyl-N-alkylthiocarbamate wurden als Extraktionsmittel für die Anreicherung von Silberspuren und für die Abtrennung von Makromengen Silber geprüft. Es ergab sich, daß solche 0,05M, in Chloroform gelöste Reagenzien Silberspuren mit hohen Verteilungskoeffizienten aus HNO₃, H₂SO₄, HClO₄ und HCl extrahieren. Die beste Selektivität wurde mit HNO₃, H₂SO₄ oder HClO₄erzielt. Neben Silber werden nur Quecksilber und Palladium extrahiert. Verwendet man HCl, so geht auch Gold in die organische Phase. Isopropyl-N-alkylthiocarbamate eignen sich für die Extraktion von Silber aus konzentrierten (bis zu 1M) Lösungen, besonders aus HNO₃: mehr als 99,9% Silber werden mit zweifachem Reagensüberschuß extrahiert. Einige charakteristische Eigenschaften der in Rede stehenden Reagenzien wurden untersucht: z. B. die Dissoziation, die Protonation, die Verteilung zwischen organischer und wäßriger Phase und die Assoziation in organischen Lösungsmitteln. Hauptsächlich liegen diese Reagenzien in Thionform vor. Silber wird als Ag(HL) _n X extrahiert, worin X für Cl, Br, J oder NO₃ steht. Schwefel fungiert als Donatoratom für deren Bildung.Verfahren zur Silberbestimmung in geologischen Proben mit Hilfe der Flammen-Atomabsorption (3×10^–7%) bzw. der atomaren Emission (l×10^–7) wurden ausgearbeitet. Außerdem wurden auch Verfahren zur Bestimmung von 23 Spurenelementen mittels atomarer Emission (5×10^–8 bis 1×10^–5%) und von 17 Spurenelementen mittels elektrothermaler Atomabsorption (4×10^–9 bis 8×10^–6%) in hochgereinigtem Silber entwickelt.

---

---

The paper has been presented at the Fifth European Conference on Analytical Chemistry (Euroanalysis V), Cracow, August 26–31, 1984.     

Spectrofluorimetric determination of trace amounts of Tb(III) using acetylacetone in ethanol solution

Summary The spectrofluorimetric determination of terbium(III) in ethanol (95%) solution of acetylacetone (3×10^–4 mol/l) was studied. Intensive fluorescence of terbium(III) (=545 nm) was observed after excitation of the system (=310 nm). The method proposed is satisfactory for the determination of terbium(III) in the range of 4 to 40 ng/ml (2.5×10^–8 to 2.5×10^–7 mol/l). The effect of other rare earths, common metal ions and anions upon the intensity of the fluorescence emitted by terbium(III) is discussed.

---

Spektrofluorimetrische Bestimmung von Tb(III)-Spuren mit Acetylaceton in Ethanollösung

     

Determination of acipimox in capsules by differential pulse polarography

A differential pulse polarographic (DPP) method has been developed for the determination of acipimox in its pharmaceutical formulations. Using Sörensen buffer pH 6.0 as supporting electrolyte a single, irreversible peak occurred at –0.79 V vs an Ag/AgCl reference electrode. The peak height vs concentration plot was found to be linear over the range of 10^–6 to 6 × 10^–4 mol/l. The detection limit is 60ng/ml. The analysis of a series of 10 Olbetam® 250 mg capsules showed an overall standard deviation of ± 4.18 mg and a S_rel of ± 1.66%, respectively.     

Schnelle coulometrische Mikrobestimmung einzelner Polythionate

Zusammenfassung Das neue Mikrobestimmungsverfahren beruht auf der coulometrischen Titration von S₂O₃ ^2– nach vorheriger Abbaureaktion der Polythionate mit Sulfit bzw. Cyanid. Es werden 10 ml Probelösung (S₄O₆ ^2–: 5 · 10^–5 bis 1 · 10^–3 M; S₅O₆ ^2–; 2,5 · 10^–5 bis 1· 10^–3 M; S₆O₆ ^2–: 1,66 · 10^–5 bis 1 · 10^–3 M) benötigt. Die Titrationskurve wird von einem Schreiber registriert. Die Reproduzierbarkeit der jeweiligen Einzelbestimmung liegt bei VK _p±0,1 bis ± 1,6%.

---

Rapid coulometric microdetermination of individual polythionates

The method described is based on the coulometric titration of S₂O₃ ^2– after a preceding degradation of the polythionates with sulphite or cyanide. 10 ml of sample solution are required (S₄O₆ ^2–: 5× 10^–5 to 1×10^–3 M; S₅O₆ ^2– : 2.5×10^–5 to 1×10^–3 M; S₆O₆ ^2–: 1.66×10^–5 to 1×10^–3 M). The titration curve is recorded. The reproducibility of a single determination is VK _p±0.1 to ± 1.6%.

     

Some N-alkyl-naphthylazo pyridinium salts as new reagents for the spectrophotometric determination of anionic surfactants

Summary Eleven pyridinium azo dyes with straight-chain alkyl groups C_nH_2n+1–(n=6–18) and bromoalkyl groups BrC_mH_2m–(m=6–12) were synthesized with the intention of developing reagents for the determination of low levels of anionic surfactants in an aqueous medium. The effect of the alkyl chain length of these reagents on the reactivity with anionic surfactants such as sodium dodecylsulphate (SDS), sodium linear-dodecylbenzenesulphonate (DBS), sodium dodecylsulphonate (DS) and sodium laurate (SL) was studied. It was found that the alkyl chain length played an important role in the formation of ion associates and the composition of the ion associates formed. These reagents were classified into four groups with respect to the reactivity with anionic surfactants. The first group (n,m=6) reacts only with DBS. The second group (n,m=8) reacts with SDS, DBS and DS. The third group (n,m=10, 12) reacts with SDS, DBS and DS; however, the colour intensity of the DBS-ion associate was unstable. The fourth group (n=14, 16, 18) reacts with all anionic surfactants examined, and the composition of the ion associates with SDS and DS was 2:1 ([reagent]/[surfactant]) though that of the ion associates of the three reagent groups mentioned above was 1:1. The optimal conditions for the determination of anionic surfactants in river water with 1-octyl-4-(4-aminonaphthylazo)-pyridinium bromide was examined. The calibration graph was linear up to 3×10^–6 mol/l, and the apparent molar absorptivity of the ion associate was 3.8×10⁴ l mol^–1 cm^–1 (at 427 nm). The relative standard deviation for 2.4×10^–6 mol/l SDS was 4.9%. Recoveries of 88–107% were found for 8.0×10^–7 mol/l SDS in river water samples.     

A study on terbium sensitized chemiluminescence of ciprofloxacin and its application

A novel rapid flow injection method with chemiluminescence (CL) detection was established for the determination of ciprofloxacin (CPLX), which is an antibiotic commonly used. The method is based on CL of Ce(IV)–SO₃²⁻ sensitized by Tb³⁺–CPLX, and showed the intensive bands characteristic of Tb³⁺ (⁵D₄→⁷F₅). The optimum conditions for CL emission were investigated. The linear relationship between the relative CL intensity and the concentration of CPLX is in the range of 9.0×10⁻⁹–1.0×10⁻⁶ mol/l with a detection limit of 3.1×10⁻¹⁰ mol/l. The relative standard deviation is 2.8% (n=11) for a level of 5.0×10⁻⁸ mol/l. The method was applied to the analysis of CPLX in human serum and urine samples with satisfactory results. The possible mechanism for this sensitized CL reaction is also discussed.