Multiple ligand transfer reaction between [CpRu(L)(AN)2][PF6] (L=AN, CO, P(OMe)3; AN=acetonitrile) and CpFe(CO)L′X (L′=CO, PMe3, PMe2Ph, PMePh2, PPh3, P(OPh)3; X=Cl, Br, I)

Treatment of ruthenium complexes [CpRu(AN)₃][PF₆] (1a) (AN=acetonitrile) with iron complexes CpFe(CO)₂X (2a–2c) (X=Cl, Br, I) and CpFe(CO)L′X (6a–6g) (L′=PMe₃, PMe₂Ph, PMePh₂, PPh₃, P(OPh)₃; X=Cl, Br, I) in refluxing CH₂Cl₂ for 3 h results in a triple ligand transfer reaction from iron to ruthenium to give stable ruthenium complexes CpRu(CO)₂X (3a–3c) (X=Cl, Br, I) and CpRu(CO)L′X (7a–7g) (L′=PMe₃, PMe₂Ph, PMePh₂, PPh₃, P(OPh)₃; X=Br, I), respectively. Similar reaction of [CpRu(L)(AN)₂][PF₆] (1b: L=CO, 1c: P(OMe)₃) causes double ligand transfer to yield complexes 3a–3c and 7a–7h. Halide on iron, CO on iron or ruthenium, and two acetonitrile ligands on ruthenium are essential for the present ligand transfer reaction. The dinuclear ruthenium complex 11a [CpRu(CO)(μ-I)]₂ was isolated from the reaction of 1a with 6a at 0°C. Complex 11a slowly decomposes in CH₂Cl₂ at room temperature to give 3a, and transforms into 7a by the reaction with PMe₃.     

Addition of a Reformatsky reagent to N-anthracene-9-sulfonyl and related imines: Synthesis of protected β-amino acids

The Reformatsky reagent tert-butoxycarbonylmethylzinc bromide adds in high yields to N-sulfonylimines, e.g. 1a–1d, derived by condensation of benzaldehyde dimethyl acetal with methanesulfonamide, toluene-4-sulfonamide, 4-(methoxycarbonyl)benzenesulfonamide and sulfamide: the products are protected β-amino acids 2a–2d. N-Deprotection occurs reductively (Na-naphthalene; low yields) for 2b and 2c or hydrolytically (refluxing aq. pyridine; 76% yield of amino acid 3a after acid hydrolysis of the t-butyl ester) for the sulfamide derivatives 2d. Anthracene-9-sulfonamide (6) is readily available by sulfonation and chlorination of anthracene, and condenses with aldehydes [RCHO; R = Ph, 4-FC₆H₄, 4-MeOC₆H₄, 4-NCC₆H₄, 2-furyl, (E)-styryl], e.g. in the presence of TiCl₄/Et₃N, to yield imines 7a–7f, which after addition of tert-butoxycarbonylmethylzinc bromide give protected amino acids 8a–8f; however, 8f cyclizes to the sultam 9 via a spontaneous intramolecular Diels-Alder reaction. Reductive cleavage of the N-anthracene-9-sulfonyl group is much easier than for traditional N-sulfonyl protecting groups, as demonstrated by the deprotection of 8a and 8c using aluminium amalgam.     

A highly efficient regioselective one-pot synthesis of 2,3,6-trisubstituted pyridines and 2,7,7-trisubstituted tetrahydroquinolin-5-ones using K5CoW12O40·3H2O as a heterogeneous recyclable catalyst

A systematic investigation into the regioselective one-pot, three-component condensation of enaminones 1a–g, β-dicarbonyl compounds 2a–c, and ammonium acetate in the presence of a catalytic amount of K₅CoW₁₂O₄₀·3H₂O (0.01 equiv or 1.0 mol %) under solvent free conditions, as well as in refluxing isopropanol, has been reported. The reaction was highly efficient to produce 2,3,6-trisubstituted pyridines 3a–g, 4a–g, and novel 2,7,7-trisubstituted-5,6,7,8-tetrahydroquinoline-5-ones 5a–g in excellent yields. The present procedure offers advantages of short reaction time, simple work-up, and the catalyst exhibited remarkable reusable activity.     

Photolysis of benzoyl esters of 2,2′-dinitrodiphenylcarbinols in neutral and basic media

The photolysis of 2,2′-dinitrodiphenylmethylbenzoates (1a–1d) in 2-propanol gives dibenzo-[c, f]-[1,2]diazepin-11-one-oxides (5a–5d) as the major product. Dibenzo[c, f]-[1,2]diazepin-11-ones (2a–2d), 2,2′-dinitrobenzophenones (3a–3d), 2-amino-2′-nitrobenzophenones (4a–4d) and N-hydroxyacridones (6a–6d) are also formed in the reaction. When the irradiation is carried out in benzene, 3-(2′-nitrophenyl)-2,1-benzisoxazoles (7a–7d) are also obtained together with the above products.     

Studies on the syntheses of heterocycles from 3-arylsydnone-4-carbohydroximic acid chlorides with N-arylmaleimides, [1,4]naphthoquinone and aromatic amines

3-Arylsydnone-4-carbohydroximic acid chlorides (1) could react with N-arylmaleimides (3a–b) or 2-methyl-N-phenylmale-imide (3c) to give 3-(3-arylsydnon-4-yl)-5-aryl-3a,6a-dihydro-pyrrolo[3,4-d]isoxazole-4,6-diones (4a–h) or 6a-methyl-3-(3-arylsydnon-4-yl)-5-phenyl-3a,6a-dihydro-pyrrolo[3,4-d]isoxazole-4,6-diones (4i–l), respectively. However, 3-(arylsydnon-4-yl)-naphtho[2,3-d]isoxazole-4,9-diones (6a–d) were obtained in good yield by the reaction of carbohydroximic acid chlorides 1 with [1,4]naphthoquinone. Furthermore, 2-(3-arylsydnon-4-yl)benzoxazoles (9a–d) and 2-(3-arylsydnon-4-yl)benzothiazoles (9e–h) were obtained via the reaction of carbohydroximic acid chlorides 1 with ortho-substituted aromatic amines 7a and b.     

Nanosecond and picosecond laser flash photolysis studies of 2,2′-dinitrodiphenylmethanes

The transient absorption spectra of the 2,2′-dinitrodiphenylmethanes 1a–1c in solution were examined in the picosecond and nanosecond time ranges. The absorption bands, observed at 420–450 nm on 355 nm (18 ps) excitation of these compounds, were attributed to the nitronic acids 2a–2c, formed through the singlet-state- mediated intramolecular hydrogen abstraction and the triplet states of 1a–1c. Biradical intermediates, formed through the intramolecular abstraction of the benzylic hydrogen by the triplet excited state, were detected for 1a and 1b. Transient species produced following 355 nm (approximately 6 ns) pulse excitation of 1a–1c result in the formation of the corresponding nitronic acids 2a–2c, with absorption maxima around 415–430 nm. These nitronic acids are the precursors of the various products formed in the steady state irradiation of 1a–1c     

Preparation, properties, and reactions of metal-containing heterocycles: Part CV. Synthesis and structure of polyoxadiphosphaplatinaferrocenophanes

A series of novel heterobimetallic crown ether-like polyoxadiphosphaplatinaferrocenophanes cis-[1,1′-Fc(CH₂O(CH₂CH₂O)_nCH₂CH₂PPh₂)₂]PtCl₂ (n=1–3) (4a–c) was synthesized in good yield by cyclization of the bis(phosphine) ligands 1,1′-Fc(CH₂O(CH₂CH₂O)_nCH₂CH₂PPh₂)₂ (n=1–3) (3a–c) and (PhCN)₂PtCl₂ under high dilution conditions in CH₂Cl₂. The bisphosphines 3a–c are obtained by reaction of the corresponding diols 1,1′-Fc(CH₂O(CH₂CH₂O)_nCH₂CH₂OH)₂ (n=1–3) (1a–c) with: (i) CH₃SO₂Cl in CH₂Cl₂ and (ii) LiPPh₂ in THF. Although the X-ray crystal structure of 4a shows that the cavity is large enough for the encapsulation of small metal cations, inclusion experiments of 4a–c with Group 1 cations, and Mg²⁺, or NH₄⁺ in solution applying NMR titration and cyclovoltammetric methods reveal no evidence for the formation of host–guest complexes for 4a,b. In the case of 4c only the addition of Na⁺ or K⁺ leads to an insignificant effect.     

Synthesis of novel water-soluble linear and heterocyclic phosphino amino acids from 2-phosphinophenols or 2-phosphinophenolethers, formaldehyde and amino acids

Acyclic and cyclic amino acid derivatives of 2-phosphinophenols have been synthesised by reaction of primary phosphinophenols (4-R-2-H₂PC₆H₃OH; R=H, Me, OMe) 1a–c with formaldehyde and amino acids (o- and p-aminobenzoic acid, -lysine) via in situ formed hydroxymethyl species 2a–c. Condensation reactions with glycine did not afford defined products except when the methoxymethyl and tetrahydropyranyl ethers of 1d,e were used instead of the hydroxy compounds. o-Aminobenzoic acid gives rise to linear bis(o-carboxyphenylaminomethyl)phosphines 3a–e. p-Aminobenzoic acid, dependent on the molar ratio, affords bis(p-carboxyphenylaminomethyl)phosphines 4a,d as well as eight-membered heterocyclic 1,5,3,7-diazadiphosphacyclooctanes 5a–e. The aliphatic amino acids glycine and -lysine form six-membered heterocyclic 1,3,5-diazaphosphorinanes 6d and 7a–e, respectively, in presence of excess formaldehyde. -lysine differs from glycine by reaction at the terminal amino group. The structures of the compounds have been elucidated by multinuclear NMR spectroscopy. The salts of the phosphino amino acids are soluble in water. Water solubility increases with the number of hydrophilic groups, i.e. free phenols are more soluble than their ethers. Ligand concentrations in water from 0.1 to 1 M were observed.     

Synthesis and properties of halogen- or methyl-containing poly(diphenylacetylene) membranes

Novel diphenylacetylenes with both trimethylsilyl groups and other substituents (R₂C₆H₃CCC₆H₄-p-SiMe₃, R = m,p-Cl,Cl, m,m-Cl,Cl, m,p-Br,Br, m,m-Br,Br, m,p-Me,Me, m,m-Me,Me, 1a–f, respectively) were polymerized with TaCl₅–n-Bu₄Sn to produce solvent-soluble polymers (2a–f). Most polymers (2a–e) had high molecular weight over 1 × 10⁶, and gave free-standing membranes by the solution casting method. Desilylation of these Si-containing polymer membranes was carried out with trifluoroacetic acid (TFA), which afforded solvent-insoluble desilylated polymer membranes (3a–e). According to thermogravimetric analysis (TGA), both Si-containing and desilylated polymers showed high thermal stability (T₀ ≥ 420 °C). The fractional free volume (FFV) of both Si-containing and desilylated polymer membranes (2a–d, 3a–d) were fairly large (ca. 0.27–0.32), while the FFVs of membranes (2e, 3e) were rather small (0.28 and 0.24). The oxygen permeability coefficients (P_O2) of 2a was as high as 5400 barrers, which is the largest among all the poly(diphenylacetylene) derivatives. Polymers 2b–d also exhibited high oxygen permeability, and their desilylated ones 3b–d retained similar high oxygen permeability. On the other hand, the P_O2 values of 2e and 3e were 1200 and 530 barrers, respectively, which are smaller than those of the halogen-containing polymers (2a–d and 3a–d).     

Studies on organophosphorus compounds—XLI : Formation of 3-pyrazoline-5-thione disulfides from 3,5-pyrazolidinediones. C-alkylation of 3,5-pyrazolidinediones

4-Substituted-1,2-diphenyl-3,5-pyrazolidinediones (Phenylbutazone analogous) 1a–d react with 2,4-bi-(4-methoxyphenyl)-1,3,2,4-dithiadiphosphetane 2,4-difulside (Lawesson Reagent (LR) with formation of the corresponding 3,3′-dithiobis (1,2-dihydro-3H-pyrazole-5-thione)'s 2a–d. When the 4-substituent contains a sulfoxide group this is deoxygenated to the sulfide by LR at room tmeperature. 1-Phthalazinone-4-thione, 1,4-phthalazine-dithione and ethyl aminothioxoacetate have also been prepared from the corresponding carbonyl compounds. Alkylation or acylation of 2a–d yielded 3H-pyrazole-3-thione derivatives 8 and 9. Alkylation of 1 with MeI in the presence of Et₃N at room temp. yielded the C-alkylated products 10 exclusively. X-RAy crystallographic investigations of 2b and 9a are presented.     

Study of the reaction of 1,1-bis(trimethylsilyl)-2-phenylethylene with some acyl chlorides in the presence of AlCl3

1,1-Bis(trimethylsilyl)-2-phenylethylene (1), which has been synthesized from the Peterson reaction between (Me₃Si)₃CLi and benzaldehyde, reacts with various acyl chlorides (RCOCl, R = Me, Et, iso-Pr, n-Bu, iso-Bu, iso-C₅H₁₁, PhCH₂, PhCH₂CH₂) in the presence of AlCl₃ to give -silyl-,β-unsaturated enones 3a–3h with high E stereoselectivity along with trans-,β-unsaturated ketones 4a–4h. The enones 3 can be partially converted into the ketones 4 with an excess of AlCl₃. Reaction of 1 with RCOCl, (R = Ph, CH₃CH=CH) afforded only the ketones 4. Yields were dependent on time and the amounts of AlCl₃ used.     

New enantiopure C2 symmetric bis(2-oxazolinyl)cage (Cage-Box) ligands from 4,5-dicyanopyridazine

7,8-Dicyanotetracyclo[7.3.0.0^2,60^5,10]dodec-7-ene 3, obtained from 4,5-dicyanopyridazine 1 and cycloocta-1,5-diene 2 through a three-step pericyclic homodomino process, was found to react with optically active β-amino alcohols 4a–d, under zinc chloride catalysis, to afford a new class of enantiopure C₂ symmetric bis(oxazolinyl)cage (Cage-Box) ligands 6a–d, along with the corresponding mono(oxazolinyl) derivatives 5a–d.     

cis- and trans-N-(Benzylsulfinyl)hexahydrobenzoxazolidin-2-ones as novel chiral sulfinyl transfer reagents

The synthesis of N-benzylsulfinyl derivatives 5a–d from both pairs of enantiomeric hexahydrobenzoxazolidin-2-ones 4a–d is reported. The use of 5a–d as effective chiral sulfinylating reagents in the preparation of enantiopure sulfoxides (e.e.>98%) is also reported.     

Chemistry and reactivity of dinuclear manganese oxamate complexes: Aerobic catechol oxidation catalyzed by high-valent bis(oxo)-bridged dimanganese(IV) complexes with a homologous series of binucleating 4,5-disubstituted-o-phenylenedioxamate ligands

The high-valent bis(oxo)-bridged dimanganese(IV) complexes with the series of binucleating 4,5-X₂-o-phenylenebis(oxamate) ligands (opbaX₂; X = H, Cl, Me) (1a–c) have been synthesized and characterized structurally, spectroscopically and magnetically. Complexes 1a–c possess unique Mn₂(μ-O)₂ core structures with two o-phenylenediamidate type additional bridges which lead to exceptionally short Mn–Mn distances (2.63–2.65 Å) and fairly bent Mn–O–Mn angles (94.1°–94.6°). The cyclovoltammograms of 1a–c in acetonitrile (25 °C, 0.1 M Bu₄NPF₆) show an irreversible one-electron oxidation peak at moderately high anodic potentials (E_ap = 0.50–0.85 V versus SCE), while no reductions are observed in the potential range studied (down to −2.0 V versus SCE). These dinuclear manganese oxamate complexes are excellent catalysts for the aerobic oxidation of 3,5-di-tert-butylcatechol to the corresponding o-quinone in acetonitrile at 25 °C. The order of increasing catecholase activity (k_obs) with the electron donor character of the ligand substituents as 1b (X = Cl) < 1a (X = H) < 1c (X = Me) correlates with Hammett σ⁺ values (ρ = −0.95). A mechanism involving initial activation of the catechol substrate by coordination to the dimetal center and subsequent oxidation to quinone by O₂ is proposed, which is consistent with the observed saturation kinetics.     

1,2,4-Triazolo[1,2-a]benzotriazoles: first examples of a novel ring system

-Benzotriazolylamides 6a–d afforded N-(benzotriazol-1-ylmethyl)arylimidoyl chlorides (4a–d), which reacted in situ with potassium tert-butoxide to form 3-aryl-1,2,4-triazolo[1,2-a]benzotriazoles (7a–d) (44–68%), representatives of a novel heterocyclic system. The structure of 7a was confirmed by single crystal X-ray analysis.     

Cationic ring opening of functionalized diphosphiranes

The functionalized diphosphiranes 1 a–c, in presence of Lewis acid, undergo two kinds of reaction:the ring opening leading to the phosphenium-phosphonium ion 2a–c obtained according to an electrocyclic reaction and the fragmentation giving phosphaalkene 3a–c and phosphonium ion 4. The deprotonation reaction of 2a–c in hexane leads to phosphino-phosphaalkenes 6a–c.     

Semi-empirical (PM3 and AM1) and ab initio molecular orbital calculations of 1,2,4-oxadiazoles, 4,5-dihydro-1,2,4-oxadiazoles and 4,4-di-n-butyl-2-phenylbenzo-1,3-oxazine

Molecular orbital calculations using semi-empirical (PM3 and AM1) and ab initio (HF/6-31G) types have been carried out on several 3,5-disubstituted 1,2,4-oxadiazoles 1a–d, 5-n-butyl-3,5-diaryl-4,5-dihydro-1,2,4-oxadiazoles 2a–d, and 4,4-di-n-butyl-2-phenylbenzo-1,3-oxazine 3. A comparison of the results by the two computational procedures has been made. Transformation of the oxadiazole ring to 4,5-dihydro-1,2,4-oxadiazole having both aryl and n-butyl groups at C-5 exhibited interesting conformational features. Also, examination of 1,3-oxazine 3 gave an idea about the structure of this compound. The rotational barrier of each phenyl group in 1a and 1d has been calculated using the ab initio method HF/6-31G(d).     

Structure of reaction products of acetoacetic ester p-dimethylaminoanil with trimethyl phosphite and Tri(dimethylamino)phosphine

Conclusions Tri(dimethylamino)phosphine and trimethyl phosphite react with the p-dimethylaminoanil of acetoacetic ester to give 11 bipolar adducts with a P-N bond.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 2, pp. 445–447, February, 1979.The authors express their gratitude to E. I. Gol'dfarb and R. G. Gainullina for taking the³¹P and¹H NMR spectra.     

Synthesis and characterisation of new 2-bromovinyl selenides and their platinum group metal complexes

The synthesis of the 2-bromocyclooctenyl selenides, C₈H₁₂(Br)SeR (3a: R = Me; 3b: R = Et; 3c: R = CH₂Ph), and the 2-bromocyclohexenyl selenides, C₆H₈(Br)SeR (4a: R = Me; 4b: R = Et; 4c: R = CH₂Ph), is described. Compounds 3a–e and 4a, b react with K₂PtCl₄ to yield square planar platinum (II) complexes of the form trans-PtL₂Cl₂ (5a: L = 3a; 5b: L = 3b; 5c: L = 3c; 6a: L = 4a; 6b: L = 4b). The analogous palladium(II) complex trans-PdL₂Cl₂ (7c: L = 4c) has been prepared from Pd(C₆H₅CN)₂Cl₂. All new compounds have been characterised by NMR, infrared and mass spectroscope and microanalysts. Complexes 5a–c, 6a, b and 7c exist as a racemic mixture of two diastereoisomers related by inversion at selenium. NMR spectroscope shows that interconversion between these two isomers is slow for 5a–e, but faster for 6a, b and 7c.     

Enantioselective conjugate additions of organolithiums to BHA enoates mediated by A chiral ligand

The conjugate addition reactions of BHA alkenoates with organolithiums in toluene or toluene-hexane at −78 °C were mediated by the chiral ligands 1 and 2 to give the corresponding 3-substituted alkanoates in high ees and high yields. The two ligands are complementary each other, 1 is effective for phenyl- and vinyllithiums to give the adducts in 64–93% ee, while 2 is effective for butyl- and ethyllithiums to give the adducts in 91–99% ee.