Palladium-mediated organic synthesis using porous polymer monolith formed in situ as a continuous catalyst support structure for application in microfluidic devices

The development and advantages of in situ synthesis of organic polymer monolith supports for metal pre-catalysts in narrow bore fused silica capillary microreactors are described. Catalyst immobilisation involves the covalent attachment of ligand binding sites to the porous polymer monolith, followed by coordination to metal centres. Flow-through microreactors using poly(chloromethylstyrene-co-divinylbenzene) monolith in capillaries of internal diameter 250 μm were used successfully for Suzuki-Miyaura and Sonogashira reactions, utilising both 1,10-phenanthroline and imidazole/carbene binding to palladium and with very low palladium leaching, illustrating the potential of flow-through technology at the microscale level using organic monolith support for transition metal catalysed reactions.     

Preparation and evaluation of poly(alkyl methacrylate-co-methacrylic acid-co-ethylene dimethacrylate) monolithic columns for separating polar small molecules by capillary liquid chromatography

In this study, methacrylic acid (MAA) was incorporated with alkyl methacrylates to increase the hydrophilicity of the synthesized ethylene dimethacrylate-based (EDMA-based) monoliths for separating polar small molecules by capillary LC analysis. Different alkyl methacrylate–MAA ratios were investigated to prepare a series of 30% alkyl methacrylate–MAA–EDMA monoliths in fused-silica capillaries (250-μm i.d.). The porosity, permeability, and column efficiency of the synthesized MAA-incorporated monolithic columns were characterized. A mixture of phenol derivatives is employed to evaluate the applicability of using the prepared monolithic columns for separating small molecules. Fast separation of six phenol derivatives was achieved in 5 min with gradient elution using the selected poly(lauryl methacrylate-co-MAA-co-EDMA) monolithic column. In addition, the effect of acetonitrile content in mobile phase on retention factor and plate height as well as the plate height-flow velocity curves were also investigated to further examine the performance of the selected poly(lauryl methacrylate-co-MAA-co-EDMA) monolithic column. Moreover, the applicability of prepared polymer-based monolithic column for potential food safety applications was also demonstrated by analyzing five aflatoxins and three phenicol antibiotics using the selected poly(lauryl methacrylate-co-MAA-co-EDMA) monolithic column.     

Hydrazide-functionalized hollow porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate) spheres for immobilization of enzyme

Hollow porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate)(HEMA-co-EDMA) spheres were prepared by emulsifier-free emulsion polymerization, swelling, seed emulsion polymerization and extraction. Then the spheres activated with 2,4,6-trichloro-1,3,5-triazine were functioned with adipohydrazide (AH). After periodate oxidation of its carbohydrate moieties, horseradish peroxidase was immobilized on the hydrazide-functionalized hollow porous poly(HEMA-co-EDMA) spheres. The amount of immobilized enzyme was up to 43.4 μg of enzyme/g of support. Moreover, the immobilized horseradish peroxidase exhibited high activity and good stability.     

Electrocatalysis at chemically modified electrodes : Detection/determination of redox gaseous species in continuous-flow systems

The electrocatalytic response of chemically modified carbon paste and glassy carbon electrodes with anchored Fe(II)/Fe(III) centers is presented for gaseous species such as NO₂, SO₂, H₂S, and Cl₂. Carbon paste electrodes are modified by direct admixing of tris[4,7-diphenyl-1,10-phenanthroline]iron(II) perchlorate, and glassy carbon electrodes are modified by oxidative electropolymerisation of tris[5-amino-1,10-phenanthroline]iron(II) perchlorate. The electrocatalytic cycle operating in the integrated reaction/pre-electrode layer of chemically modified electrodes results in significant signal enhancement. Chemical modification of the conducting surfaces protects the electrode surface from poisoning. evaluation was done in a continuous-flow system using gravitational flow fo supporting electrolyte carrier propulsion, direct injection of air containing parts per billion or parts per million (v/v) of the gaseous species, and amperometric detection with the chemically modified electrodes as part of a thin-layer cell.     

Synthesis of poly(vinylidene chloride)-based composite latexes by emulsion polymerization from epoxy functional seeds for improved thermal stability

Poly(glycidyl methacrylate-co-butyl methacrylate)/poly(vinylidene chloride-co-methyl acrylate) (poly(GMA-co-BMA)/poly(VDC-co-MA)) composite latexes have been successfully synthesized via a two-stage emulsion polymerization process. In a first step, emulsion copolymerization of GMA and BMA was carried out in optimized conditions (low temperature, neutral pH, starved-feed conditions) to both limit the hydrolysis of epoxy groups and obtain small particle size (typically 30-50 nm size range). Composite latexes were then obtained by a second-stage seeded copolymerization of VDC and MA in the presence of tetrasodium pyrophosphate to control the pH and reach high molecular weight, leading to partial encapsulation of the seed particles (snow-man morphology, in agreement with theoretical expectations). Thermogravimetric analyses performed on the resulting composite particles showed that the epoxy-functionalized seed polymer behaved as an efficient thermal stabilizer of PVDC.     

N-Phenanthroline glycosylamines: synthesis and copper(II) complexes

A series of novel N-(1,10-phenanthrolin-5-yl)-β-glycopyranosylamines was obtained with excellent stereoselectivity and synthetically useful yields by treatment of 5-amino-1,10-phenanthroline with different unprotected monosaccharides, using (NH₄)₂SO₄ as an efficient promoter. Copper(II) complexes having a 2:1 mole ratio of the bidentate ligand phenanthroline N-glycoside and the metal were also prepared.     

A novel polymeric monolith prepared with multi-acrylate crosslinker for retention-independent efficient separation of small molecules in capillary liquid chromatography

Low column efficiency for small molecules in reversed-phase chromatography is a major problem commonly encountered in polymer-based monoliths. Herein, a novel highly crosslinked porous polymeric monolith was in situ prepared by using a multi-acrylate monomer, dipentaerythritol penta-/hexa-acrylate (DPEPA), as crosslinker, which copolymerized with lauryl methacrylate (LMA) as functional monomer in a UV-transparent fused-silica capillary via photo-initiated free-radical polymerization within 5 min. The mechanical stability and permeability of the resulting poly(LMA-co-DPEPA) monolith were characterized in detail. One series of highly crosslinked poly(LMA-co-DPEPA) columns were prepared with relatively higher content of crosslinker (63.3%) in the precursor. Although they exhibited lower permeability, high column efficiency for alkylbenzenes was acquired in cLC, and the minimum plate height (column B) was in the range of 6.04–9.00 μm, corresponding to 111,000–165,000 N m⁻¹. Meanwhile, another series of poly(LMA-co-DPEPA) columns prepared with relatively lower content of crosslinker (52.7%) in the precursor exhibited higher permeability, but the minimum plate height (column E) was relatively low in the range of 10.75–20.04 μm for alkylbenzenes, corresponding to 50,000–93,000 N m⁻¹. Compared with common poly(LMA-co-EDMA) columns previously reported, the highly crosslinked poly(LMA-co-DPEPA) columns using a multi-acrylate monomer as crosslinker possessed remarkably high column efficiency for small molecules in cLC. By plotting of plate height (H) of alkylbenzenes versus the linear velocity (u) of mobile phase, the results revealed a retention-independent efficient performance of small molecules in the isocratic elution, indicating that the use of multi-functional crosslinker possibly prevents the generation of gel-like micropores in the poly(LMA-co-DPEPA) monolith, reducing the mass transfer resistance (C-term).     

Polyolefin-functionalized graphene oxide and its GO/HDPE nanocomposite with excellent mechanical properties

An effective strategy for the polyolefin-functionalized graphene oxide (fGO) using two-step methods has been reported for GO/HDPE nanocomposite with excellent mechanical properties.     

Immunoaffinity extraction of testosterone by antibody immobilized monolithic capillary with on-line laser-induced fluorescence detection

An immunoaffinity capillary column has been made with poly (2-vinyl-4, 4-dimethylazlactone-co-2-hydroxyethyl methacrylate-co-ethylene dimethacrylate) (VDA-co-HEMA-co-EDMA) monolith as a support for the immobilized antibody. The monolith is prepared by UV-initiated in situ polymerization, followed by immobilizing anti-testosterone polyclonal antibody through the rapid reaction with VDA. Fluorescence labeled testosterone at C₃ is designed as a tracer to estimate the extraction ability of this immunoaffinity column, and to optimize the immunoextraction process, such as washing, eluting, incubation and injection. The performance in a more realistic application is then demonstrated successfully for the rapid extraction of testosterone (T) by competitive immunoassay and on-line laser-induced fluorescence (LIF) detection. This immunoaffinity monolith is easily prepared, with high mechanical strength and low flow resistance. It is a satisfactory material as an immunoextractor to detect small molecular compounds specifically and rapidly with high sensitivity (sub ng/mL level).     

Improved Covalent Immobilization of Horseradish Peroxidase on Macroporous Glycidyl Methacrylate-Based Copolymers

A macroporous copolymer of glycidyl methacrylate and ethylene glycol dimethacrylate, poly(GMA-co-EGDMA), with various surface characteristics and mean pore size diameters ranging from 44 to 200 nm was synthesized, modified with 1,2-diaminoethane, and tested as a carrier for immobilization of horseradish peroxidase (HRP) by two covalent methods, glutaraldehyde and periodate. The highest specific activity of around 35 U g^?1 dry weight of carrier was achieved on poly(GMA-co-EGDMA) copolymers with mean pore diameters of 200 and 120 nm by the periodate method. A study of deactivation kinetics at 65 °C and in 80 % dioxane revealed that periodate immobilization also produced an appreciable stabilization of the biocatalyst, while stabilization factor depended strongly on the surface characteristics of the copolymers. HRP immobilized on copolymer with a mean pore diameter of 120 nm by periodate method showing not only the highest specific activity but also good stability was further characterized. It appeared that the immobilization resulted in the stabilization of enzyme over a broader pH range while the Michaelis constant value (K _m) of the immobilized HRP was 10.8 mM, approximately 5.6 times higher than that of the free enzyme. After 6 cycles of repeated use in a batch reactor for pyrogallol oxidation, the immobilized HRP retained 45 % of its original activity.     

Stereoselective synthesis of 5,6-disubstituted 5,6-dihydro-1,10-phenanthrolines and a rare example of axially constrained 2,2′-bipyridines

The stereoselective synthesis of 5,6-disubstituted 5,6-dihydro-1,10-phenanthrolines and (5S,6S)-5,6-dihydroxy-5,6-dihydro-1,10-phenanthroline cyclic o-xylylene diether, a rare example of an axially constrained 2,2′-bipyridine is reported. The strategy to obtain such compounds is based on two highly efficient reactions, the Sharpless asymmetric dihydroxylation and the Ullmann intramolecular coupling.     

Synthesis of Novel Substituted 1,10-Phenanthrolines

The syntheses of both 5-amino-6-nitro-1,10-phenanthroline and 5,6-diamino-1,10-phenanthroline (starting from 5-nitro-1,10-phenanthroline) are described in detail.     

Magnetic Fe3O4 nanoparticles coupled with a fluorescent Eu complex for dual imaging applications

Magnetic 8 nm Fe(3)O(4) nanoparticles (NPs) were synthesized and modified with dopamine (DPA) and polyethylene glycol (PEG) diacid. The water soluble Fe(3)O(4)-DPA-PEG NPs were then conjugated with the fluorescent Eu(iii) complex of tris(dibenzoylmethane)-5-amino-1,10-phenanthroline (BMAP), giving an Fe(3)O(4)-DPA-PEG-BMAP-Eu NP conjugate. The conjugate was both colloidally and chemically stable in phosphate buffered solutions and could be used as a probe for magnetic resonance and fluorescent imaging.     

Continuous-flow performance of carbon electrodes modified with immobilized Fe(II)/Fe(III) centers Amperometric response to N(2)O, NO and NO(2)

The amperometric performance of two types of chemically modified carbon electrodes developed for the determination of oxides of nitrogen in continuous-flow systems is presented. The modification consists in immobilization of reversible Fe(II)/Fe(III) centers. The first type of electrode is a simple modification made by direct mixing of carbon paste with tris-4,7-diphenyl-1,10-phenanthroline-iron(II) perchlorate; the other is a glassy-carbon surface modified by oxidative electropolymerization of tris-[5-amino-1,10-phenanthroline]iron(II) perchlorate. Detection is accomplished by transporting an injected sample plug to the sensing surface with the aid of gravitational flow of an aqueous solution of supporting electrolyte. The polymer-coated electrochemical detector compares favourably with the chemically modified carbon paste. It offers excellent resistance to poisoning and a competitive limit of detection [about 2 ppb (2 parts in 10(9)) v/v], at + 1.0 V vs. Ag/AgCl, and good selectivity for NO(2) when used in a thin-layer cell. Incorporation of the cell in a continuous-flow system allows injection of about 120 samples per hour. The typical concentration range amenable to determination is 2-25 ppb v/v but depends on the thickness of the polymeric film. Nitrogen monoxide can also be detected but only in undiluted, pure form. Dinitrogen oxide gives no amperometric signal at any of the modified surfaces.     

Polyhedral oligomeric silsesquioxanes as functional monomer to prepare hybrid monolithic columns for capillary electrochromatography and capillary liquid chromatography

A simple approach to fabricate hybrid monolithic column within the confines of fused-silica capillaries (75 μm i.d.) was introduced. A polyhedral oligomeric silsesquioxanes (POSS) reagent containing a methacrylate group was selected as functional monomer, and copolymerized with bisphenol A dimethacrylate (BPADMA) or ethylene dimethacrylate (EDMA) in the presence of porogenic solvents via thermally initiated free radical polymerization. After optimization of the preparation conditions, two POSS-containing hybrid monoliths were successfully prepared and exhibited good permeability and stability. By comparison of the separation efficiencies of the resulting poly(POSS-co-BPADMA) and poly(POSS-co-EDMA) monoliths in capillary electrochromatography (CEC) and capillary liquid chromatography (cLC), it was indicated the former has better column efficiencies for alkylbenzenes, phenols, anilines and PAHs in CEC and cLC than the latter. Particularly, the hybrid poly(POSS-co-BPADMA) monolith is more suitable for separation of PAHs due to π–π interaction between the analytes and aromatic rings in the surface of monolithic stationary phase.     

Novel zwitterionic polyphosphorylcholine monolithic column for hydrophilic interaction chromatography

A novel porous zwitterionic monolith was prepared by thermal co-polymerisation of 2-methacryloyloxyethyl phosphorylcholine (MPC) and ethylene glycol dimethacrylate (EDMA) within 100 μm I.D. capillaries. Mercury intrusion porosimetry, scanning electron microscopy (SEM), micro-HPLC (μ-HPLC), elemental analysis and ζ-potential analysis were used to evaluate the monolithic structure. No evidence of swelling or shrinking of the monolith in different polarity solvents was observed. A typical hydrophilic liquid chromatography (HILIC) mechanism was observed at high organic solvent content (acetonitrile >60%). The phosphorylcholine (PC) functionality has both a positively charged quaternary ammonium and a negatively charged phosphate group. For charged analytes, a weak electrostatic interaction was also observed by studying the influence of mobile phase pH and salt concentration on their retentions on the poly(MPC-co-EDMA) monolithic column. The optimised poly(MPC-co-EDMA) monolith showed very good selectivities for a range of polar test analytes, especially small peptides. This might be ascribed to the good biocompatibility of PC functionality. At low organic solvent content, baseline separation was also observed for a test mixture of seven alkylphenones by a reversed-phase separation mechanism.     

Electrochemical behavior of 5-amino-1,10-phenanthroline and oxidative electropolymerization of tris[5-amino-1,10-phenanthroline]iron(II)

The electrochemical behavior of 5-amino-1,10-phenanthroline and tris[5-amino-1,10-phenanthroline]-iron(II) at carbon paste, glassy carbon, and platinum electrodes is reported. The iron complex undergoes electrochemically induced oxidative polymerization from acetonitrile solutions and the resulting polymers are very stable. Charge transport through the polymer films occurs with a charge transfer diffusion coefficient, D_ct, equal to 3.1 × 10⁻⁸ cm² s⁻¹ corresponding to an electron self-exchange rate of 5.2×10⁷M⁻¹ s⁻¹. The activation energy and the entropy change for the charge transfer diffusion process are (approximate values) 32.0 ± 0.12 kJ mol⁻¹ and −24.7 ± 0.4 J K⁻¹ mol⁻¹, respectively.     

Chemical modification of poly(lactic acid) and its use as matrix in poly(lactic acid) poly(butylene adipate-co-terephthalate) blends

Poly(lactic acid), PLA, was chemically modified with maleic anhydride (MA) by reactive extrusion. The effect of this modification on molar mass (MM) and acidity was assessed by means of size-exclusion chromatography (SEC) and titration, respectively. PLA MM decreased in the presence of MA solely and of MA and peroxide. Reduction in MM was monitored by the increase in acidity. PLA blends containing poly(butylene adipate-co-terephthalate) (PBAT) were prepared through different mixing protocols, PLA/PBAT, PLA-g-MA/PBAT and PLA/PBAT/MA/peroxide (PLA/PBAT in situ). SEC results and rheological properties revealed reduction in MM and viscosity of the modified blends. PLA/PBAT presented increase in MM and bimodal MM distribution. The calculated interfacial tension was significantly lower for the modified blends, despite the lower average particle area of PLA/PBAT. Surprisingly, the modified blends presented higher yield strength than that predicted by the rule of mixtures, which might indicate interfacial reactions.     

Chemiluminescent flow-through sensor for 1,10-phenanthroline based on the combination of molecular imprinting and chemiluminescence.

A functional polymer for the catalysis of the chemiluminescent reaction and molecular recognition ability of 1,10-phenanthroline was prepared based on the molecular imprinting method. The structural and catalytic roles of transition metal ion interactions were applied in the material design. A ternary complex, 4-vinylpyridine-Cu(II)-1,10-phenanthroline (2:1:1), was synthesized and used as a functional monomer. The ligand 1,10-phenanthroline in the ternary complex was the template used to form the molecularly imprinted polymer. Another monomer, styrene, and the cross-linking reagent divinylbenzene were copolymerized with the ternary complex. The polymer containing the ternary complex is an efficient catalyst for the decomposition of hydrogen peroxide. During the hydrogen peroxide decomposition, superoxide radical ion is formed, which reacts with 1,10-phenanthroline and gives a chemiluminescent emission. The 1,10-phenanthroline was destroyed during the chemiluminescent reaction, leaving a cavity and copper binding sites for another 1,10-phenanthroline molecule. The prepared polymer particles were packed into a glass tube and developed as a molecular recognition chemiluminescent flow-through sensor for 1,10-phenanthroline. The sensitivity and selectivity of the sensor were tested.     

Chiral resolution of derivatized amino acids using uniformly sized molecularly imprinted polymers in hydro-organic mobile phases

Uniformly sized molecularly imprinted polymers (MIPs) for Boc-l-Trp were prepared using ethylene glycol dimethacrylate (EDMA) as the cross-linker, and methacylic acid (MAA) and/or 4-vinylpyridine (4-VPY) as the functional monomers or without use of a functional monomer. The MIPs prepared were evaluated using acetonitrile or a mixture of phosphate buffer and acetonitrile as the mobile phase. The Boc-l-Trp-imprinted EDMA polymers can recognize Boc-l-Trp by its molecular shape, and can thus afford the enantioseparation of Boc-Trp. Besides the molecular shape recognition, the hydrophobic interactions with the polymer backbones as well as the hydrogen-bonding interactions of Boc-l-Trp with carboxyl and pyridyl groups in the polymers should work for the retention and recognition of Boc-l-Trp on the imprinted MAA-co-EDMA and 4-VPY-co-EDMA polymers, respectively, in the hydro-organic mobile phase. The hydrogen-bonding interactions seem to become dominant when only acetonitrile is used as the mobile phase. The Boc-l-Trp-imprinted 4-VPY-co-EDMA polymers gave the highest retentivity and enantioselectivity for Boc-Trp among the MIPs prepared. However, the simultaneous use of MAA and 4-VPY was not effective for the enantioseparation of Boc-Trp in a hydro-organic mobile phase. Furthermore, the baseline separation of Boc-Trp enantiomers was attained within 10 min on the Boc-l-Trp-imprinted 4-VPY-co-EDMA polymers under the optimized HPLC conditions.