An Efficient Synthesis of 2-CF3-3-Benzylindoles

The reaction of α-CF₃-β-(2-nitroaryl) enamines with benzaldehydes afforded effectively α,β-diaryl-CF₃-enones having nitro group. Subsequent reduction of nitro group by NH₄HCO₂-Pd/C system initiated intramolecular cyclization to give 2-CF₃-3-benzylindoles. Target products can be prepared in up to quantitative yields. Broad synthetic scope of the reaction was shown. Probable mechanism of indole formation is proposed.     

Synthesis and Reactions of 3-Halogenated 2-CF3-Indoles

Halogenation of 2-trifluoromethylindole afforded 3-chloro-, 3-bromo- and 3-iodo derivatives in up to 98% yield. Methyl-, benzyl- and tosyl-groups can be installed at the nitrogen atom of prepared indoles in high yields by base catalyzed reaction with the corresponding alkylating (sulfonylating) reagents. A high synthetic utility of the prepared haloindoles in the reaction with various nucleophilies was shown. The reaction with 4-methylthiophenol and copper cyanide afforded the corresponding sulfides and nitriles in high yield. Palladium catalyzed cross-coupling with phenyl boronic acid and phenylacetylene gave the corresponding 3-phenyl-2-CF₃-indoles and acetylenic derivatives in 72–98% yield.     

Direct dynamics studies for the reactions of CF3CHFCF3 and CF3CF2CHF2 with H atoms

The rate constants of the hydrogen abstraction reactions of CF₃CHFCF₃ + H (R1) and CF₃CF₂CHF₂ + H (R2) have been calculated by means of the dual-level direct dynamics method. Optimized geometries and frequencies of stationary points and extra points along the minimum-energy path (MEP) are obtained at the MPW1K/6-311+G(d,p) level, and the classical energetic information is further corrected with the interpolated single-point energy (ISPE) approach by the G3(MP2) level of theory. Using the canonical variational transition state theory (CVT) with small-curvature tunneling corrections (SCT), the rate constants are evaluated over a wide temperature range of 200-2000 K. The calculated CVT/SCT rate constants are in good agreement with available experimental values. It is found that the variational effect is very small and almost negligible over the whole temperature region. However, the small-curvature tunneling correction plays an important role in the lower temperature range. Furthermore, the heats of formation of species CF₃CF₂CHF₂ (SC₁ or SC₂) and CF₃CF₂CF₂ are studied using isodesmic reactions to further elucidate the thermodynamic properties.     

MoS2‐Based Catalysts for N2 Electroreduction to NH3 – An Overview of MoS2 Optimization Strategies

The nitrogen reduction reaction (NRR) has become an ideal alternative to the Haber‐Bosch process, as NRR possesses, among others, the advantage of operating under ambient conditions and saving energy consumption. The key to efficient NRR is to find a suitable electrocatalyst, which helps to break the strong N≡N bond and improves the reaction selectivity. Molybdenum disulfide (MoS₂) as an emerging layered two‐dimensional material has attracted a mass of attention in various fields. In this minireview, we summarize the optimization strategies of MoS₂‐based catalysts which have been developed to improve the weak NRR activity of primitive MoS₂. Some theoretical predictions have also been summarized, which can provide direction for optimizing NRR activity of future MoS₂‐based materials. Finally, an outlook about the optimization of MoS₂‐based catalysts used in electrochemical N₂ fixation are given.     

Synthesis Of CF3-Heterocycles Based on 4-Dimethylamino-1,1,1-trifluoro-3-buten-2-one

Novel heterocyclizations have been investigated based on the reaction of the complex between trifluoromethanesulfonic anhydride and 4-dimethylamino-1,1,1-trifluoro-3-buten-2-one with 2,2'-biindolyl and N,N'-dipyrrolylmethane leading to closure of 6- or 7-membered rings.     

Investigation of CF2 carbene on the surface of activated charcoal in the synthesis of trifluoroiodomethane via vapor-phase catalytic reaction

This paper investigates the synthetic mechanism of trifluoroiodomethane (CF₃I) in the reaction of trifluoromethane and iodine via vapor-phase catalytic reaction. It is suggested that CF₂ carbene is the key intermediate and is formed in the pyrolysis process of CHF₃ at high temperature. However, in pyrolysis of CHF₃ under activated charcoal (AC) existing conditions, no C₂F₄ was detected. H₂ and 2-methyl-2-butene could not trap the CF₂ carbene. When treating the remained compounds on the used AC with H₂, CH₄ is formed on the process. It is proposed that CF₂ carbene combines with AC strongly and transfers into CF₃ radical on heat. In addition, it is found that the AC is not only the catalyst supporter to form CF₃I, but also a co-catalyst to promote the formation of CF₂ carbene and CF₃ radical.     

Efficient route to 6-CF3-substituted nicotinic acid derivatives

A novel synthetic sequence for preparation of CF₃-pyridines is presented. Reaction of α,β-unsaturated trifluoromethylketones with α-cyanoketones leads to α-hydroxydihydropyranes 1 containing CF₃-group. α-Hydroxydihydropyranes can be easily transformed to α-hydroxytetrahydropyridines, 1,4-dihydropyridines and CF₃-pyridines. All CF₃-pyridine derivatives were obtained in good yields. This route can be applied for preparation of CF₃-pyridines containing various substituents with further possible modification on cyano-group.     

Dissociation and IVR pathways for the CF3H(H2O)3 cluster

Classical trajectory simulations are used to study the intramolecular dynamics of isolated CF₃H and the CF₃H(H₂O)₃ cluster, by either exciting the CH stretch local mode to then=6 level or by adding an equivalent amount of energy to an OH stretch normal mode. Energy transfer from the CH local mode is statistically the same for CF₃H(H₂O)₃ as for isolated CF₃H, and agrees with previous experimental studies. Clusters excited with 6 quanta in the CH local mode are remarkably stable. Though the CF₃H-(H₂O)₃ intermolecular potential is only 1.5 kcal/mol, only 1 of 26 clusters excited with 6 quanta in the CH local mode dissociate within 10 ps. The absorption linewidth for the CH local mode in CF₃H(H₂O)₃ is related to IVR within CF₃H and not to the unimolecular lifetime of the cluster. When an OH stretch normal mode of the cluster is excited, energy transfer to CF₃H is negligible and nearly one half of the clusters dissociate within 10 ps.     

An Efficient Procedure for the Synthesis of Benzoxazole and Benzothiazole Derivatives Using a H2O2/SiO2-FeCl3 System

A series of benzoxazole and benzothiazoles was readily prepared from the reaction of ortho-aminophenol/ortho-aminothiophenol and aldehydes using solid silica supported ferric chloride (SiO₂-FeCl₃) as catalyst followed by oxidation with H₂O₂ under ambient conditions. Some of advantages of this method are a simple and convenient procedure, easy purification, and shorter reaction times.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Addition of Electrophilic Radicals to 2‐Benzyloxyglycals: Synthesis and Functionalization of Fluorinated α‐C‐Glycosides and Derivatives

A new method for the synthesis of fluorinated α‐C‐glycosides is described. The reactions between highly electrophilic radicals (fluorinated or unfluorinated) and a 2‐benzyloxyglucal or galactal provide 2‐keto‐D ‐arabino‐ or 2‐keto‐D ‐lyxo‐hexopyranosides through an addition/fragmentation process. Sodium borohydride mediated or Meerwein–Ponndorf–Verley (MPV) reduction of these compounds provides α‐C‐glycosides that feature appropriate anchoring groups for further synthetic elaboration. The presence of CF₂CO₂iPr or CF₂Br groups at the pseudo‐anomeric position allows efficient reduction/olefination or Br/Li‐exchange/nucleophilic‐addition sequences. These transformations open the way for the synthesis of fluorinated C‐glycosidic analogues of glycoconjugates.     

Gas-phase reactions of CF3 and CF2 with atomic and molecular fluorine: Their significance in plasma etching

Reaction rate coefficients have been measured at 295 K for both CF₃ and CF₂ with atomic and molecular fluorine. The reaction between CF₃ and F was studied over a gas number density range of (2.4–23)×10¹⁶ cm^–3 with helium as the bath gas. The measured rate coefficient increased from (1.1–1.7)×10^–11 cm³ s^–1 as the gas number density increased over this range. In contrast to this relatively small change in rate coefficient with gas number density, the rate coefficient for CF₂+F increased from (0.4–2.3)×10^–12 cm³ s^–1 as the helium gas number density increased from (3.4–28.4)×10¹⁶ cm^–3. Even for the highest bath gas number density employed, the rate coefficient was still more than an order of magnitude lower than earlier measurements of this coefficient performed at comparable gas number densities.Both these association reactions are examined from the standpoint of the Gorin model for association of radicals and use is made of unimolecular dissociation theory to examine the expected dependence on gas number density. The calculations reveal that CF₃+F can be explained satisfactorily in these terms but CF₂+F is not well described by the simple Gorin model for association.CF₃ was found to react with molecular fluorine with a rate coefficient of (7±2)×10^–14 cm³ s^–1 whereas only an upper limit of 2×10^–15 cm³ s^–1 could be placed on the rate coefficient for the reaction between CF₂ and F₂. The values obtained for this set of reactions mean that the reaction between CF₃ and F will play an important role in plasmas containing CF₄. The high rate coefficient will mean that, under certain conditions, this particular reaction will control the amount of CF₄ consumed. On the other hand, the much lower rate coefficient for reactions between CF₂ and F means that CF₂ will attain much higher concentrations than CF₃ in plasmas where these combination reactions are dominant.     

DFT and ab initio theoretical study for the CF3S + CO reaction

The potential energy surface for the reaction of CF₃S with CO is calculated at the G4//B3LYP/6-311++G(d,p) level of theory. The results show that F-abstraction and addition-elimination mechanisms are involved, and the latter one is dominant thermodynamically and kinetically. The dominant channel is the reactant addition to form CF₃SCO, and then decomposes to CF₃ + OCS. While the direct F-abstraction channel and CF₃SCO isomerization channel are not significant for the title reaction due to higher barriers involved. The comparisons among four reactions of CX₃Y + CO (X = H, F; and Y = O, S) are made to imply the similar and different properties and reactivities of the same family elements and the F- and S-substituted derivatives.     

Structure and electronic structure of [(CF3)2PN]2NVCl2, a molecule involving a planar six-membered ring (N3P2V)

Summary The SCF method is applied to determine the (gas phase) structure of [(CF₃)₂PN]₂NVCl₂, which agrees with the solid-state X-ray structure within typical errors of 2 pm and 2° in bond distances and angles. The electronic structure of atoms forming the ring is best described in terms of divalent N^– and tetravlent P⁺ with appreciable declocalization of nitrogen lone pairs into low-lying empty orbitals of neighbouring atoms P and V. No evidence for aromaticity of the ring system is found.     

BiOBr/g-C3N4 S型异质结无H2O2光-自芬顿高效催化降解RhB

通过焙烧-超声混合法成功地制备了BiOBr/g-C₃N₄S型异质结复合光催化剂。采用多种表征手段对样品物理属性进行了表征,包括X射线多晶粉末衍射仪(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-Vis DRS)。研究了所制备样品有/无Fe³⁺的光-自芬顿催化/光催化降解罗丹明B(RhB)性能。通过捕获实验确定了光催化反应中的主要活性物种,提出了光-自芬顿反应的降解机理。研究结果表明,BiOBr/g-C₃N₄S型异质结能原位生成H₂O₂,添加Fe³⁺后,H₂O₂被原位活化成活性物种且光生电流和载流子分离效率获得显著提高。该光-自芬顿过程能高效降解RhB,其反应速率常数为0.208 min^-1,约为无Fe³⁺光催化反应速率常数的5.3倍,在光-自芬顿循环使用过程中表现出良好的稳定性。Fe...     

BiOBr/g-C3N4 S型异质结无H2O2光-自芬顿高效催化降解RhB

通过焙烧-超声混合法成功地制备了BiOBr/g-C₃N₄ S型异质结复合光催化剂。采用多种表征手段对样品物理属性进行了表征,包括X射线多晶粉末衍射仪(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-VisDRS)。研究了所制备样品有/无Fe³⁺的光-自芬顿催化/光催化降解罗丹明B (RhB)性能。通过捕获实验确定了光催化反应中的主要活性物种,提出了光-自芬顿反应的降解机理。研究结果表明,BiOBr/g-C₃N₄ S型异质结能原位生成H₂O₂,添加Fe³⁺后,H₂O₂被原位活化成活性物种且光生电流和载流子分离效率获得显著提高。该光-自芬顿过程能高效降解RhB,其反应速率常数为0.208 min^-1,约为无Fe³⁺光催化反应速率常数的5.3倍,在光-自芬顿循环使用过程中表现出良好的稳定性。Fe³⁺的加入促进了光生电荷的分离和H₂O₂的活化,超氧阴离子自由基(·O₂^-)、空穴和羟基是光-自芬顿催化过程中的主要活性物种,且·O₂^-作用更大。     

Reactions of CF3-enones with ethyl nitroacetate and nitromethane: synthesis of CF3-γ-nitroketones

Reactions of α,β-unsaturated CF₃-ketones with nitromethane and ethyl nitroacetate have been investigated. We found that α,β-unsaturated trifluoromethylketones react with ethyl nitroacetate in the presence of calcinated potassium fluoride to form two classes of 1,4-conjugated addition products: CF₃-γ-nitroketones and 6,6,6-trifluoro-2-nitro-5-oxohexanoates in nearly quantitative yields. The products obtained are precursors for CF₃-pyrrolidine synthesis.     

The addition of (CF3SO2)2CHBr to vinylidene fluoride

It has been found that a mixture of (CF₃SO₂)₂CH₂ and (CF₃SO₂)₂CBr₂ can be used instead of (CF₃SO₂)₂CHBr in the radical addition to H₂CCF₂; the 1:1 and 1:2 adducts have been isolated and characterized. An improved synthesis of (CF₃SO₂)₂CBr₂ is also reported.     

Ab initio quantum chemical studies on the reactions of CF3O2 with OH

The potential energy surface for the CF₃O₂ + OH reaction has been theoretically investigated using the DFT (B3LYP/6-311G(d,p)) level of theory. Both singlet and triplet potential energy surfaces are investigated. The reaction mechanism on the triplet surface is simple. However, the reaction mechanism on the singlet surface is more complicated. It is revealed that the formation of CF₃O + HO₂ is the dominant channel on the triplet surface. The potential energy surface (PES) for this reaction has been given according to the relative energies calculated at the DFT/B3LYP/6-311G(d,p) level. Because this reaction involves both triplet and singlet states, triplet–singlet intersystem crossing (ISC) crossing also have been investigated in this paper.     

The DFT and ab initio investigations on the mechanism of CF3O2 + H reaction

The mechanisms for the reaction of CF₃O₂ with atomic hydrogen were studied with ab initio and DFT methods. The results reveal that the reaction could take place on the singlet and triplet potential energy surfaces (PES). For the singlet PES, addition/elimination and substitution mechanisms are determined, and the former one is dominant. The most favorable channel involves the association of CF₃O₂ with H atom to form CF₃O₂H (IM1) via a barrierless process, and then the O–O bond dissociates to give out CF₃O + OH. The secondary product might be CF₃OH + O, formed from the O–O bond cleavage in the initial adduct CF₃O(H)O (IM2). Other products such as CF₃ + O₂H, HF + CF₂O₂ and O₂ + CHF₃ are of no importances because of higher barriers. On the triplet PES, only substitution mechanism is located. With higher barriers involving, the channels on the triplet PES could be negligible compared with the channels on the singlet PES.     

Synthesis of new functional derivatives of pyrazolidine from 1-acetyl-3-methyl-5-nitromethyl-2-phenylpyrazolidine

3-Nitromethylpyrazolidine reacts with derivatives of unsaturated acids and reducing agents with the formation of polyfunctional compounds of the pyrazolidine nucleus. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1365–1369, September, 2006.