Tuning Photophysical Properties by p-Functional Groups in Zn(II) and Cd(II) Complexes with Piperonylic Acid

Aggregation between discrete molecules is an essential factor to prevent aggregation-caused quenching (ACQ). Indeed, functional groups capable of generating strong hydrogen bonds are likely to assemble and cause ACQ and photoinduced electron transfer processes. Thus, it is possible to compare absorption and emission properties by incorporating two ligands with a different bias toward intra- and intermolecular interactions that can induce a specific structural arrangement. In parallel, the π electron-donor or electron-withdrawing character of the functional groups could modify the Highest Ocuppied Molecular Orbital (HOMO)–Lowest Unocuppied Molecular Orbital (LUMO) energy gap. Reactions of M(OAc)₂·2H₂O (M = Zn(II) and Cd(II); OAc = acetate) with 1,3-benzodioxole-5-carboxylic acid (Piperonylic acid, HPip) and 4-acetylpyridine (4-Acpy) or isonicotinamide (Isn) resulted in the formation of four complexes. The elucidation of their crystal structure showed the formation of one paddle-wheel [Zn(μ-Pip)₂(4-Acpy)]₂ (1); a mixture of one dimer and two monomers [Zn(µ-Pip)(Pip)(Isn)₂]₂·2[Zn(Pip)₂(HPip)(Isn)]·2MeOH (2); and two dimers [Cd(μ-Pip)(Pip)(4-Acpy)₂]₂ (3) and [Cd(μ-Pip)(Pip)(Isn)₂]₂·MeOH (4). They exhibit bridged (1, µ₂-η¹:η¹), bridged, chelated and monodentated (2, µ₂-η¹:η¹, µ₁-η¹:η¹ and µ₁-η¹), or simultaneously bridged and chelated (3 and 4, µ₂-η²:η¹) coordination modes. Zn(II) centers accommodate coordination numbers 5 and 6, whereas Cd(II) presents coordination number 7. We have related their photophysical properties and fluorescence quantum yields with their geometric variations and interactions supported by TD-DFT calculations.     

From 1D to 2D Cd(II) and Zn(II) Coordination Networks by Replacing Monocarboxylate with Dicarboxylates in Partnership with Azine Ligands: Synthesis,Crystal Structures,Inclusion, and Emission Properties

Eight mixed-ligand coordination networks, [Cd(2-aba)(NO₃)(4-bphz)_3/2]_n·n(dmf) (1), [Cd(2-aba)₂(4-bphz)]_n·0.75n(dmf) (2), [Cd(seb)(4-bphz)]_n·n(H₂O) (3), [Cd(seb)(4-bpmhz)]_n·n(H₂O) (4), [Cd(hpa)(3-bphz)]_n (5), [Zn(1,3-bdc)(3-bpmhz)]_n·n(MeOH) (6), [Cd(1,3-bdc)(3-bpmhz)]_n ·0.5n(H₂O)·0.5n(EtOH) (7), and [Cd(NO₃)₂(3-bphz)(bpe)]_n·n(3-bphz) (8) were obtained by interplay of cadmium nitrate tetrahydrate or zinc nitrate hexahydrate with 2-aminobenzenecarboxylic acid (H(2-aba)), three dicarboxylic acids, sebacic (decanedioic acid, H₂seb), homophthalic (2-(carboxymethyl)benzoic acid, H₂hpa), isophthalic (1,3-benzenedicarboxylic acid, H₂(1,3-bdc)) acids, bis(4-pyridyl)ethane (bpe) and with four azine ligands, 1,2-bis(pyridin-4-ylmethylene)hydrazine (4-bphz), 1,2-bis(1-(pyridin-4-yl)ethylidene) hydrazine (4-bpmhz), 1,2-bis(pyridin-3-ylmethylene)hydrazine (3-bphz), and 1,2-bis(1-(pyridin-3-yl) ethylidene)hydrazine (3-bpmhz). Compounds 1 and 2 are 1D coordination polymers, while compounds 3–8 are 2D coordination polymers. All compounds were characterized by spectroscopic and X-ray diffraction methods of analysis. The solvent uptakes and stabilities to the guest evacuation were studied and compared for 1D and 2D coordination networks. The de-solvated forms revealed a significant increase of emission in comparison with the as-synthesized crystals.     

Prediction of Stability Constants for Cr(III) and Cr(II) Complexes

Regression analysis was used to derive equations for estimaing thermodynamic stability constants for complexes of Cr²⁺ (log^° ₁[Cr²⁺L] = 0.53log^° _n [H _n L]) and Cr³⁺ (log^° ₁[Cr³⁺L] = 0.88log^° _n [H _n L]) from the known protonation constants of H _n L ligands and for determining stability constants of Cr²⁺ and Cr³⁺ complexes from the available stability constants of Cu²⁺ complexes (log^° ₁[Cr²⁺L] = 0.76log^° ₁[Cu²⁺L] and log^° ₁[Cr²⁺L] = 0.60log^° ₁[Cr³⁺L], respectively). Parameters of the Panteleon–Ecka equation for calculating stability constants of Cr²⁺ complexes ( = 0.57) and Cr³⁺ complexes ( = 0.69) with two and three bidentate ligands were also determined. The ratio of logarithmic stability constants for complexes with the same metals but with different metal ionic charges was found to be approximately equal to the ratio of charges on the central ions. The stability constant of Cr(II) sulfate complex was calculated.     

Oxidative homolysis of organochromium(III) macrocyclic complexes

Summary Organochromium complexes, [CrRL(H₂O)]²⁺] (L = 1,4,8,12-tetraazacyclopentadecane; R = 1°- or 2°-alkyl, or para-substituted benzyl), are oxidized to [CrRL(H₂O)]³⁺, which rapidly decomposes (k ₃ > 10² s^–1) by homolysis of the Cr-C bond. Rate constants of the oxidation of these complexes by [IrCl₆]^2– range from 2.20 × 10^–1 (R = Me) to 4.60 × 10⁵ (R = 4-MeC₆H₄CH₂)dm³ mol^–1 s^–1. A very negative reaction constant (–4.3) is found for the oxidation of para-substituted benzlchromium(III) complexes which, in conjunction with the results of product analysis, indicates a [Cr^III/R^.] type transition state.     

Self-Assembly of Antiferromagnetically-Coupled Copper(II) Supramolecular Architectures with Diverse Structural Complexities

The self-assembly of 2,6-diformyl-4-methylphenol (DFMP) and 1-amino-2-propanol (AP)/2-amino-1,3-propanediol (APD) in the presence of copper(II) ions results in the formation of six new supramolecular architectures containing two versatile double Schiff base ligands (H₃L and H₅L1) with one-, two-, or three-dimensional structures involving diverse nuclearities: tetranuclear [Cu₄(HL²⁻)₂(N₃)₄]·4CH₃OH·56H₂O (1) and [Cu₄(L³⁻)₂(OH)₂(H₂O)₂] (2), dinuclear [Cu₂(H₃L1²⁻)(N₃)(H₂O)(NO₃)] (3), polynuclear {[Cu₂(H₃L1²⁻)(H₂O)(BF₄)(N₃)]·H₂O}_n (4), heptanuclear [Cu₇(H₃L1²⁻)₂(O)₂(C₆H₅CO₂)₆]·6CH₃OH·44H₂O (5), and decanuclear [Cu₁₀(H₃L1²⁻)₄(O)₂(OH)₂(C₆H₅CO₂)₄] (C₆H₅CO₂)₂·20H₂O (6). X-ray studies have revealed that the basic building block in 1, 3, and 4 is comprised of two copper centers bridged through one μ-phenolate oxygen atom from HL²⁻ or H₃L1²⁻, and one μ-1,1-azido (N₃⁻) ion and in 2, 5, and 6 by μ-phenoxide oxygen of L³⁻ or H₃L1²⁻ and μ-O²⁻ or μ₃-O²⁻ ions. H-bonding involving coordinated/uncoordinated hydroxy groups of the ligands generates fascinating supramolecular architectures with 1D-single chains (1 and 6), 2D-sheets (3), and 3D-structures (4). In 5, benzoate ions display four different coordination modes, which, in our opinion, is unprecedented and constitutes a new discovery. In 1, 3, and 5, Cu(II) ions in [Cu₂] units are antiferromagnetically coupled, with J ranging from −177 to −278 cm⁻¹.     

Mechanistic studies on the oxidation of pyruvic acid by an oxo-bridged diiron(III,III) complex in aqueous acidic media

In aqueous solution [Fe₂(μ-O)(phen)₄(H₂O)₂]⁴⁺ (1, phen = 1,10-phenanthroline) equilibrates with its conjugate bases [Fe₂(μ-O)(phen)₄(H₂O)(OH)]³⁺ (2) and [Fe₂(μ-O)(phen)₄(OH)₂]²⁺ (3). In the presence of excess phen and in the pH range 2.5–5.5, the dimer quantitatively oxidizes pyruvic acid to acetic acid and carbon dioxide, the end iron species being ferroin, [Fe(phen)₃]²⁺. The observed reaction rate shows a bell-shaped curve as pH increases, but is independent of added phen. Kinetic analysis shows that (3) is non-reactive and (1) has much higher reactivity than (2) in oxidizing pyruvic acid. The basicity of the bridging oxygen increases with deprotonation of the aqua ligands. The reaction rate decreases significantly in media enriched with D₂O in comparison to that in H₂O, with a greater retardation at higher pH, suggesting the occurrence of proton coupled electron transfer (PCET; 1e, 1H⁺), which possibly drags the energetically unfavorable reaction to completion in presence of excess phen.     

Cobalt(II), Nickel(II), and Copper(II) Complexes with Diphenylthiocarbazide

New [ML(H₂O)₂] complexes (M = Co²⁺, Ni²⁺, or Cu²⁺; H₂L = diphenylthiocarbazide) were synthesized and studied using IR and diffuse reflection electronic spectroscopy, magnetic chemistry, conductometry, and DTA. The metals were shown to coordinate L^2–through nitrogen and sulfur atoms. The complex [CuL(H₂O)₂] is a dimer.     

Coordination compounds of europium(III), terbium(III), dysprosium(III), samarium(III), and gadolinium(III) with 2-acetylbenzoic acid

LnAcbenz₃ · 3H₂O complexes of Eu³⁺, Tb³⁺, Dy³⁺, Sm³⁺, and Gd³⁺ with 2-acetylbenzoic acid (HAcbenz) have been synthesized. The complexes have been studied by thermogravimetry and infrared and luminescence spectroscopy. According to IR spectroscopy data, the complexation of Acbenz^? with lanthanide ions occurs due to the bidentate coordination of carboxyl groups. According to thermal analysis, the complexes are dehydrated at a temperature above 140°C, and their thermodestruction begins at a temperature above 250°C. From the luminescence spectra measured at 77 and 300 K, it has been established that the integral luminescence intensity of EuAcbenz₃ · 3H₂O and TbAcbenz₃ ° 3H₂O is, respectively, 10 and 19 times higher than for tris-benzoates of the same metals. TbAcbenz₃ ° 3H₂O, the most intensively luminescing complex, is recommended for use as a promising luminescent material.     

Studies on ruthenium(III), rhodium(III) and iridium(III) complexes of indazoles

Summary New complexes of the general formula M(L)₃Cl₃ and M(5-AInz)₂Cl₃ · n H₂O (where M = Ru^III, Rh^III and Ir^III; L = indazole and 5-nitroindazole; n=1–2) have been synthesized and characterised by elemental analysis, molar conductance, magnetic susceptibility and i.r. and electronic spectral measurements. All the complexes are covalent and apparently have an octahedral geometry. The ligands are monocoordinated through the pyrrole nitrogen. From the far i.r. spectra amer configuration has been assigned to the indazole and 5-nitroindazole complexes.     

Interaction of Aluminium (III) with the f-Family Ions Np(VI), Pu(VI), Np(V), Np(IV), Pu(IV), Nd(III), and Am(III) in the Course of Simultaneous Hydrolysis

The interaction of Np(VI), Pu(VI), Np(V), Np(IV), Pu(IV), Nd(III), and Am(III) with Al(III) in solutions at pH 0–4 was studied by the spectrophotometric method. It was shown that, in the range of pH 3–4, the hydrolyzed forms of neptunyl and plutonyl react with the hydrolyzed forms of aluminium. In the case of Pu(VI), the mixed hydroxoaqua complexes (H₂O)₃PuO₂(-OH)₂Al(OH)(H₂O)₃ ²⁺ or (H₂O)₄PuO₂OAl(OH)(H₂O)₄ ²⁺ are formed at the first stage of hydrolysis. Np(VI) also forms similar hydroxoaqua complexes with Al(III). The formation of the mixed hydroxoaqua complexes was also observed when Np(IV) or Pu(IV) was simultaneously hydrolyzed with Al(III) at pH 1.5–2.5. The Np(IV) complex with Al(III) has, most likely, the formula (H₂O) _n (OH)Np(-OH)₂Al(OH)(H₂O)₃ ³⁺. At pH from 2 to 4.1 (when aluminium hydroxide precipitates), the Np(V) or Nd(III) ions exist in solutions with or without Al(III) in similar forms. When pH is increased to 5–5.5, these ions are almost not captured by the aluminium hydroxide precipitate.     

Mononuclear complexes of manganese(II), iron(II), cobalt(II), nickel(II), copper(II), and zinc(II), with 4-amino-3,5-bis(pyridin-2-yl)-1,2,4 triazole and tris(2-aminoethyl) amine: crystal structure of [Ni(tren)(abpt)](NO3)2(H2O)2.25

Complexes of the type [M(tren)(abpt)](NO₃)₂(H₂O)_n (1–6) [M = Mn^II, Fe^II, Co^II, Cu^II, Zn^II (n = 2), Ni^II (n = 2.25), tren = tris(2-aminoethyl)amine, and abpt = 4-amino-3,5-bis(pyridin-2yl)-1,2,4 triazole] have been prepared. The bonding mode and overall geometry of the complexes have been deduced by elemental analyses, molar conductance values, spectral studies (obtained from FT-IR), ¹H-n.m.r., electronic spectral analyses and magnetic susceptibility measurements. A detailed molecular structure of complex (4) has been determined by single X-ray crystallography.     

Construction of Two Stable Co(II)-Based Hydrogen-Bonded Organic Frameworks as a Luminescent Probe for Recognition of Fe3+ and Cr2O72− in H2O

A pair of cobalt(II)-based hydrogen-bonded organic frameworks (HOFs), [Co(pca)₂(bmimb)]_n (1) and [Co₂(pca)₄(bimb)₂] (2), where Hpca = p-chlorobenzoic acid, bmimb = 1,3-bis((2-methylimidazol-1-yl)methyl)benzene, and bimb = 1,4-bis(imidazol-1-ylmethyl)benzene were hydrothermally synthesized and characterized through infrared spectroscopy (IR), elemental and thermal analysis (EA), power X-ray diffraction (PXRD), and single-crystal X-ray diffraction (SCXRD) analyses. X-ray diffraction structural analysis revealed that 1 has a one-dimensional (1D) infinite chain network through the deprotonated pca⁻ monodentate chelation and with a μ₂-bmimb bridge Co(II) atom, and 2 is a binuclear Co(II) complex construction with a pair of symmetry-related pca⁻ and bimb ligands. For both 1 and 2, each cobalt atom has four coordinated twisted tetrahedral configurations with a N₂O₂ donor set. Then, 1 and 2 are further extended into three-dimensional (3D) or two-dimensional (2D) hydrogen-bonded organic frameworks through C–H···Cl interactions. Topologically, HOFs 1 and 2 can be simplified as a 4-connected qtz topology with a Schläfli symbol {6⁴·8²} and a 4-connected sql topology with a Schläfli symbol {4⁴·6²}, respectively. The fluorescent sensing application of 1 was investigated; 1 exhibits high sensitivity recognition for Fe³⁺ (K_sv: 10970 M⁻¹ and detection limit: 19 μM) and Cr₂O₇²⁻ (K_sv: 12960 M⁻¹ and detection limit: 20 μM). This work provides a feasible detection platform of HOFs for highly sensitive discrimination of Fe³⁺ and Cr₂O₇²⁻ in aqueous media.     

Ligational behaviour of two biologically active N−S donors towards cobalt(III), iron(III), iron(II) and rhodium(III)

Summary The chelating behaviour of two biologically active ligands, pyridine-2-carboxaldehyde(4-phenyl) thiosemicarbazone(L₁H) and pyridine-2-carboxaldehyde thiosemicarbazone(LH), towards Fe^III, Co^III, Fe^II and Rh^III has been investigated. The ligands act as tridentate N–N–S donors, resulting in the formation of bis-chelate complexes of the type M^III(A)₂X·nH₂O (A=L₁ or L; X=Cl, ClO₄; M=Co^III, Rh^III, Fe^III), Fe^II(L₁H)₂SO₄·2H₂O and Fe^II(L₁)₂·H₂O. Biological activity of the ligands and the metal complexes in the form ofin vitro antibacterial activities towardsE. coli has been evaluated and the possible reasons for enhancement of the activity of ligands on coordination to metal ion is discussed.     

Solubility and Phase Behavior of Cr(III) Oxides in Alkaline Media at Elevated Temperatures

A platinum-lined, flowing autoclave facility is used to investigate the solubility behavior of Cr₂O₃ and FeCr₂O₄ in alkaline sodium phosphate, sodium hydroxide, and ammonium hydroxide solutions between 21 and 288°C. Baseline Cr(III) ion solubilities were found to be on the order of 0.1 nmolal, which were enhanced by the formation of anionic hydroxo and phosphato complexes. At temperatures below 51°C, the activity of Cr(III) ions in aqueous solution is controlled by a Cr(OH)₃·3H₂O solid phase rather than Cr₂O₃; above 51°C the saturating solid phase is -CrOOH. Measured chromium solubilities were interpreted via a Cr(III) ion hydrolysis/complexing model and thermodynamic functions for the hydrolysis/complexing reaction equilibria were obtained from least-squares analyses of the data. The existence of four new Cr(III) ion complexes is reported: Cr(OH)₃(H₂PO₄)^–, Cr(OH)₃(HPO₄)^2–, Cr(OH)₃(PO₄)^3–, and Cr(OH)₄(HPO₄)-(H₂PO₄)^4–. The last species is the dominant Cr(III) ion complex in concentrated, alkaline phosphate solutions at elevated temperatures.     

Novel repaglinide complexes with manganese(II), iron(III), copper(II) and zinc(II): Spectroscopic,DFT characterization and electrochemical behaviour

Novel transition metal complexes with the repaglinide ligand [2-ethoxy-4-[N-[1-(2piperidinophenyl)-3-methyl-1-1butyl] aminocarbonylmethyl]benzoic acid] (HL) are prepared from chloride salts of manganese(II), iron(III), copper(II), and zinc(II) ions in water-alcoholic media. The mononuclear and non-electrolyte [M(L)₂(H₂O)₂]?nH₂O (M = Mn²⁺, n = 2, M = Cu²⁺, n = 5 and M = Zn²⁺, n = 1) and [M(L)₂(H₂O)(OH)]?H₂O (M = Fe³⁺) complexes are obtained with the metal:ligand ratio of 1:2 and the L-deprotonated form of repaglinide. They are characterized using the elemental and molar conductance. The infrared, ¹H and ¹³C NMR spectra show the coordination mode of the metal ions to the repaglinide ligand. Magnetic susceptibility measurements and electronic spectra confirm the octahedral geometry around the metal center. The experimental values of FT-IR, ¹H, NMR, and electronic spectra are compared with theoretical data obtained by the density functional theory (DFT) using the B3LYP method with the LANL2DZ basis set. Analytical and spectral results suggest that the HL ligand is coordinated to the metal ions via two oxygen atoms of the ethoxy and carboxyl groups. The structural parameters of the optimized geometries of the ligand and the studied complexes are evaluated by theoretical calculations. The order of complexation energies for the obtained structures is as follows:

$$Fe(III) complex < Cu(II) complex < Zn(II) complex < Mn(II) complex.$$

The redox behavior of repaglinide and metal complexes are studied by cyclic voltammetry revealing irreversible redox processes. The presence of repaglinide in the complexes shifts the reduction potentials of the metal ions towards more negative values.

     

Austausch von Chrom(III) mit Chrom(II) und Szilard—Chalmers-Reaktion von Kaliumchromat

Zusammenfassung Durch Versuche mit⁵¹Cr wird gezeigt, daß Cr³⁺ mit Cr²⁺ austauscht, wenn man ein Chrom(III)-Salz in wässeriger Cr²⁺-Lösung auflöst, d. h. die Hydratation zum reaktionsträgen [Cr(H₂O)₆]³⁺ verläuft relativ langsam. Die Bedeutung dieses Austausches für dieSzilard—Chalmers-Reaktion von Chromat wird diskutiert.

---

Experiments with⁵¹Cr prove the exchange of Cr³⁺ with Cr²⁺ when a Cr(III)-salt is dissolved in an aqueous solution of Cr²⁺. This indicates that the hydration to the inert [Cr(H₂O)₆]³⁺ is relatively slow. The importance of this exchange for theSzilard—Chalmers reaction of chromate is discussed.

     

A kinetic study of the oxidation of 3- and 4-pyridinemethanol,and 3- and 4-pyridinecarboxaldehyde by chromium(VI) in acidic aqueous media

Oxidation of 3-pyridinemethanol (3-pyol), 4-pyridinemethanol (4-pyol), 3-pyridinecarboxaldehyde (3-pyal) and 4-pyridinecarboxaldehyde (4-pyal) by Cr^VI was studied under pseudo-first-order conditions in the presence of a large excess of reductant and at various H_aq ⁺ concentrations; [Cr^VI] = 8 × 10^–4 M, [reductant] = 0.025–0.20 M, [HClO₄] = 1.0 and 2.0 M (I = 1.2 and 2.1 M) or 0.5–2.0 (I = 2.1 M). A linear dependence of the pseudo-first-order rate constant (k _obs) on [reductant] and a parabolic function of k _obs versus [H⁺] lead to the rate law: –d[Cr^VI]/dt = (a + b[H⁺]²)[reductant][Cr^VI], where a and b describe the reaction paths via HCrO₄ ^– and H₃CrO₄ ⁺ species respectively, and are composite values including rate constants and equilibrium constants. The apparent activation parameters were determined from second-order rate constants at 1.0 and 2.0 M HClO₄, at three temperatures within the 293–323 K range. The presence of chromium species with intermediate oxidation states – Cr^V, Cr^IV and Cr^II, was deduced based on e.s.r. measurements and the kinetic effects of Mn^II or O₂ (Ar), respectively. The alcohols were oxidized to the aldehydes, and carboxylic acids and the aldehydes to the carboxylic acids. Chromium(III) was in the form of the [Cr(H₂O)₆]³⁺ complex.     

Simultaneous, sensitive and selective on-line chemiluminescence determination of Cr(III) and Cr(VI) by capillary electrophoresis

A novel in-capillary reduction and capillary electrophoretic (CE)-chemiluminescence (CL) method was developed for the sensitive and selective determination of chromium(III) and chromium(VI). The proposed method was based on the in-capillary reduction of Cr(VI) with acidic H₂O₂ to form Cr(III) using the zone-passing technique and chemiluminescence detection of Cr(III). The sample [Cr³⁺ and CrO₄²⁻], hydrochloric acid, and H₂O₂ (reductant) solution segments were injected for specified periods of time in this order from the anodic end of a capillary, followed by application of an appropriate running voltage between both ends. As both chromium species have opposite charges, Cr³⁺ migrates to the cathode while CrO₄²⁻ ion, moving oppositely to the anode, reacts with acidic H₂O_2, resulted in formation of Cr³⁺. Based on the migration time difference of both Cr³⁺ ions, they were separated by zone electrophoresis. Running buffer was composed of 0.02 mol l⁻¹ HAc-NaAc (pH 4.7) with 1×10⁻³ mol l⁻¹ EDTA. Parameters affecting CE-CL separation and detection, such as reductant concentration, mixing mode of the analytes with CL reagent, CL reaction reagent pH and concentration, stability of luminol-hydrogen peroxide mixed solution were optimized. The limits of detection for chromium(III) and chromium(VI) (3σ) were 6×10⁻¹³ mol l⁻¹ (mass concentration 12 zmol) and 8×10⁻¹² mol l⁻¹ (160 zmol), respectively. This method offered potential advantages of simplicity, sensitivity, selectivity and applicability to the determination of Cr(III) and Cr(VI) in environmental water.     

Selective removal of Cd(II), As(III), Pb(II) and Cr(III) ions from water resources using novel 2-anthracene ammonium-based magnetic ionic liquids

Facile synthesis of two 2-anthracene ammonium-based magnetic ionic liquids (MILs), 2-anthracene ammonium tetrachloroferrate (III) ([2A-A]FeCl₄) and 2-anthracene ammonium trichlorocobaltate (II) ([2A-A]CoCl₃) was performed by protonation of 2-aminoanthracene, followed complexation with FeCl₃/CoCl₂. The MILs were tested in the adsorptive removal of Cd²⁺, As³⁺, Pb²⁺ and Cr³⁺ from water sources. Upon treatment with 10 mg dosage of MILs in 10 mL aqueous solution of 50 ppm each of Cd²⁺, As³⁺, Pb²⁺ and Cr³⁺, adsorption capacity (mg/g) in the range of 5.73–55.5 and 23.6–56.8 for [2A-A]FeCl₄ and [2A-A]CoCl₃ respectively were recorded. Thus, the optimization, kinetic and isotherms studies were conducted using the [2A-A]CoCl₃ adsorbent. The [2A-A]CoCl₃ was more effective in pH 7–9, and equilibrium adsorption was achieved after 60 min contact time. The adsorption process proceeded via the Pseudo-second order pathway and the Langmuir isotherm model is the best fit for the adsorption process (with q_max = 227 – 357 mg/g) of all the targeted metal ions. The [2A-A]CoCl₃ adsorbent demonstrated practicality with large distribution and selectivity coefficients of the targeted ions, and up to six times regeneration.     

Study of the [Cr(H2O)5NO]2+ Complex via Density Functional Theory

On the basis of density functional theory, the spin ground state of chromium‐nitrosyl complex [Cr(H₂O)₅NO]²⁺ (S = 1/2) is studied via B3LYP hybrid method. Its vibrational frequencies, atomic charges, and spin densities are analyzed. The excitation energies are evaluated using the CIS method. Our calculated N‐O stretching frequency and excitation energies are in good agreement with the IR and UV‐vis data. The related Cr^I(H₂O)₆⁺, Cr^II(H₂O)₆²⁺, and Cr^III(H₂O)₆³⁺ complexes are employed as the reference compounds to determine the characteristics of the central Cr. Results indicate that the effective Cr oxidation state is close to Cr(I).