Stabilizing Halogen-Bonded Complex between Metallic Anion and Iodide

Halogen bonds (XBs) between metal anions and halides have seldom been reported because metal anions are reactive for XB donors. The pyramidal-shaped Mn(CO)₅⁻ anion is a candidate metallic XB acceptor with a ligand-protected metal core that maintains the negative charge and an open site to accept XB donors. Herein, Mn(CO)₅⁻ is prepared by electrospray ionization, and its reaction with CH₃I in gas phase is studied using mass spectrometry and density functional theory (DFT) calculation. The product observed experimentally at m/z = 337 is assigned as [IMn(CO)₄(OCCH₃)]⁻, which is formed by successive nucleophilic substitution and reductive elimination, instead of the halogen-bonded complex (XC) CH₃−I···Mn(CO)₅⁻, because the I···Mn interaction is weak within XC and it could be a transient species. Inspiringly, DFT calculations predict that replacing CH₃I with CF₃I can strengthen the halogen bonding within the XC due to the electro-withdrawing ability of F. More importantly, in so doing, the nucleophilic substitution barrier can be raised significantly, ~30 kcal/mol, thus leaving the system trapping within the XC region. In brief, the combination of a passivating metal core and the introduction of an electro-withdrawing group to the halide can enable strong halogen bonding between metallic anion and iodide.     

Low Energy Electron Attachment by Some Chlorosilanes

In this paper, the rate coefficients (k) and activation energies (E_a) for SiCl₄, SiHCl₃, and Si(CH₃)₂(CH₂Cl)Cl molecules in the gas phase were measured using the pulsed Townsend technique. The experiment was performed in the temperature range of 298–378 K, and carbon dioxide was used as a buffer gas. The obtained k depended on temperature in accordance with the Arrhenius equation. From the fit to the experimental data points with function described by the Arrhenius equation, the activation energies (E_a) were determined. The obtained k values at 298 K are equal to (5.18 ± 0.22) × 10⁻¹⁰ cm³·s⁻¹, (3.98 ± 1.8) × 10⁻⁹ cm³·s⁻¹ and (8.46 ± 0.23) × 10⁻¹¹ cm³·s⁻¹ and E_a values were equal to 0.25 ± 0.01 eV, 0.20 ± 0.01 eV, and 0.27 ± 0.01 eV for SiHCl₃, SiCl₄, and Si(CH₃)₂(CH₂Cl)Cl, respectively. The linear relation between rate coefficients and activation energies for chlorosilanes was demonstrated. The DFT/B3LYP level coupled with the 6-31G(d) basis sets method was used for calculations of the geometry change associated with negative ion formation for simple chlorosilanes. The relationship between these changes and the polarizability of the attaching center (α_centre) was found. Additionally, the calculated adiabatic electron affinities (AEA) are related to the α_centre.     

The effect of H2O on the sulfation of Havelock limestone under oxy-fuel conditions in a thermogravimetric analyser

A gas mixture representing oxy-fuel combustion conditions was employed in a thermogravimetric analyser to determine the effect of water vapor and SO₂ concentration on limestone sulfation kinetics over the temperature range of 800 to 920 °C. Here, experiments used small samples of particles (4 mg), with small particle sizes (d_p < 38 µm) and large gas flow rates (120 mL/min@NTP) in order to minimize mass transfer interferences. The gas mixture contained 5000 ppm_v SO₂, 2% O₂, and the H₂O content was changed from 0% to 25% with the balance CO₂. When water vapor was added to the gas mixture at lower temperatures (800–870 °C), the limestone SO₂ capture efficiency increased. However, as the temperature became higher, the enhancement in total conversion values decreased. As expected, Havelock limestone at higher temperatures (890 °C, 920 °C, and 950 °C) experienced indirect sulfation and reacted at a faster rate than for lower temperatures (800–870 °C) for direct sulfation over the first five minutes of reaction time. However, the total conversion of Havelock limestone for direct sulfation was generally greater than for indirect sulfation.     

Perturbating Intramolecular Hydrogen Bonds through Substituent Effects or Non-Covalent Interactions

An analysis of the effects induced by F, Cl, and Br-substituents at the α-position of both, the hydroxyl or the amino group for a series of amino-alcohols, HOCH₂(CH₂)_nCH₂NH₂ (n = 0–5) on the strength and characteristics of their OH···N or NH···O intramolecular hydrogen bonds (IMHBs) was carried out through the use of high-level G4 ab initio calculations. For the parent unsubstituted amino-alcohols, it is found that the strength of the OH···N IMHB goes through a maximum for n = 2, as revealed by the use of appropriate isodesmic reactions, natural bond orbital (NBO) analysis and atoms in molecules (AIM), and non-covalent interaction (NCI) procedures. The corresponding infrared (IR) spectra also reflect the same trends. When the α-position to the hydroxyl group is substituted by halogen atoms, the OH···N IMHB significantly reinforces following the trend H < F < Cl < Br. Conversely, when the substitution takes place at the α-position with respect to the amino group, the result is a weakening of the OH···N IMHB. A totally different scenario is found when the amino-alcohols HOCH₂(CH₂)_nCH₂NH₂ (n = 0–3) interact with BeF₂. Although the presence of the beryllium derivative dramatically increases the strength of the IMHBs, the possibility for the beryllium atom to interact simultaneously with the O and the N atoms of the amino-alcohol leads to the global minimum of the potential energy surface, with the result that the IMHBs are replaced by two beryllium bonds.     

Intracluster Sulphur Dioxide Oxidation by Sodium Chlorite Anions: A Mass Spectrometric Study

The reactivity of [NaL·ClO₂]⁻ cluster anions (L = ClO_x⁻; x = 0–3) with sulphur dioxide has been investigated in the gas phase by ion–molecule reaction experiments (IMR) performed in an in-house modified Ion Trap mass spectrometer (IT-MS). The kinetic analysis revealed that SO₂ is efficiently oxidised by oxygen-atom (OAT), oxygen-ion (OIT) and double oxygen transfer (DOT) reactions. The main difference from the previously investigated free reactive ClO₂⁻ is the occurrence of intracluster OIT and DOT processes, which are mediated by the different ligands of the chlorite anion. This gas-phase study highlights the importance of studying the intrinsic properties of simple reacting species, with the aim of elucidating the elementary steps of complex processes occurring in solution, such as the oxidation of sulphur dioxide.     

Exploration of the Crystal Structure and Thermal and Spectroscopic Properties of Monoclinic Praseodymium Sulfate Pr2(SO4)3

Praseodymium sulfate was obtained by the precipitation method and the crystal structure was determined by Rietveld analysis. Pr₂(SO₄)₃ is crystallized in the monoclinic structure, space group C2/c, with cell parameters a = 21.6052 (4), b = 6.7237 (1) and c = 6.9777 (1) Å, β = 107.9148 (7)°, Z = 4, V = 964.48 (3) ų (T = 150 °C). The thermal expansion of Pr₂(SO₄)₃ is strongly anisotropic. As was obtained by XRD measurements, all cell parameters are increased on heating. However, due to a strong increase of the monoclinic angle β, there is a direction of negative thermal expansion. In the argon atmosphere, Pr₂(SO₄)₃ is stable in the temperature range of T = 30–870 °C. The kinetics of the thermal decomposition process of praseodymium sulfate octahydrate Pr₂(SO₄)₃·8H₂O was studied as well. The vibrational properties of Pr₂(SO₄)₃ were examined by Raman and Fourier-transform infrared absorption spectroscopy methods. The band gap structure of Pr₂(SO₄)₃ was evaluated by ab initio calculations, and it was found that the valence band top is dominated by the p electrons of oxygen ions, while the conduction band bottom is formed by the d electrons of Pr³⁺ ions. The exact position of ZPL is determined via PL and PLE spectra at 77 K to be at 481 nm, and that enabled a correct assignment of luminescent bands. The maximum luminescent band in Pr₂(SO₄)₃ belongs to the ³P₀ → ³F₂ transition at 640 nm.     

Synthesis,Conformational Analysis and Evaluation of the 2-aryl-4-(4-bromo-2-hydroxyphenyl)benzo[1,5]thiazepines as Potential α-Glucosidase and/or α-Amylase Inhibitors

The ambident electrophilic character of the 5-bromo-2-hydroxychalcones and the binucleophilic nature of 2-aminothiophenol were exploited to construct the 2-aryl-4-(4-bromo-2-hydroxyphenyl)benzo[1,5]thiazepines. The structures and conformation of these 2-aryl-4-(4-bromo-2-hydroxyphenyl)benzo[1,5]thiazepines were established with the use of spectroscopic techniques complemented with a single crystal X-ray diffraction method. Both ¹H-NMR and IR spectroscopic techniques confirmed participation of the hydroxyl group in the intramolecular hydrogen-bonding interaction with a nitrogen atom. SC-XRD confirmed the presence of a six-membered intramolecularly hydrogen-bonded pseudo-aromatic ring, which was corroborated by the DFT method on 2b as a representative example in the gas phase. Compounds 2a (Ar = -C₆H₅), 2c (Ar = -C₆H₄(4-Cl)) and 2f (Ar = -C₆H₄(4-CH(CH₃)₂) exhibited increased inhibitory activity against α-glucosidase compared to acarbose (IC₅₀ = 7.56 ± 0.42 µM), with IC₅₀ values of 6.70 ± 0.15 µM, 2.69 ± 0.27 µM and 6.54 ± 0.11 µM, respectively. Compound 2f, which exhibited increased activity against α-glucosidase, also exhibited a significant inhibitory effect against α-amylase (IC₅₀ = 9.71 ± 0.50 µM). The results of some computational approaches on aspects such as noncovalent interactions, calculated binding energies for α-glucosidase and α-amylase, ADME (absorption, distribution, metabolism and excretion) and bioavailability properties, gastrointestinal absorption and blood–brain barrier permeability are also presented.     

A faux hawk fullerene with PCBM-like properties

Reaction of C₆₀, C₆F₅CF₂I, and SnH(n-Bu)₃ produced, among other unidentified fullerene derivatives, the two new compounds 1,9-C₆₀(CF₂C₆F₅)H (1) and 1,9-C₆₀(cyclo-CF₂(2-C₆F₄)) (2). The highest isolated yield of 1 was 35% based on C₆₀. Depending on the reaction conditions, the relative amounts of 1 and 2 generated in situ were as high as 85% and 71%, respectively, based on HPLC peak integration and summing over all fullerene species present other than unreacted C₆₀. Compound 1 is thermally stable in 1,2-dichlorobenzene (oDCB) at 160 °C but was rapidly converted to 2 upon addition of Sn₂(n-Bu)₆ at this temperature. In contrast, complete conversion of 1 to 2 occurred within minutes, or hours, at 25 °C in 90/10 (v/v) PhCN/C₆D₆ by addition of stoichiometric, or sub-stoichiometric, amounts of proton sponge (PS) or cobaltocene (CoCp₂). DFT calculations indicate that when 1 is deprotonated, the anion C₆₀(CF₂C₆F₅)^– can undergo facile intramolecular S_NAr annulation to form 2 with concomitant loss of F^–. To our knowledge this is the first observation of a fullerene-cage carbanion acting as an S_NAr nucleophile towards an aromatic C–F bond. The gas-phase electron affinity (EA) of 2 was determined to be 2.805(10) eV by low-temperature PES, higher by 0.12(1) eV than the EA of C₆₀ and higher by 0.18(1) eV than the EA of phenyl-C₆₁-butyric acid methyl ester (PCBM). In contrast, the relative E _1/2(0/–) values of 2 and C₆₀, –0.01(1) and 0.00(1) V, respectively, are virtually the same (on this scale, and under the same conditions, the E _1/2(0/–) of PCBM is –0.09 V). Time-resolved microwave conductivity charge-carrier yield × mobility values for organic photovoltaic active-layer-type blends of 2 and poly-3-hexylthiophene (P3HT) were comparable to those for equimolar blends of PCBM and P3HT. The structure of solvent-free crystals of 2 was determined by single-crystal X-ray diffraction. The number of nearest-neighbor fullerene–fullerene interactions with centroid···centroid (⊙···⊙) distances of ≤10.34 Å is significantly greater, and the average ⊙···⊙ distance is shorter, for 2 (10 nearest neighbors; ave. ⊙···⊙ distance = 10.09 Å) than for solvent-free crystals of PCBM (7 nearest neighbors; ave. ⊙···⊙ distance = 10.17 Å). Finally, the thermal stability of 2 was found to be far greater than that of PCBM.     

Isolation of a Nitromethane Anion in the Calix-Shaped Inorganic Cage

A calix-shaped polyoxometalate, [V₁₂O₃₂]⁴⁻ (V12), stabilizes an anion moiety in its central cavity. This molecule-sized container has the potential to control the reactivity of an anion. The highly-reactive cyanate is smoothly trapped by V12 to form [V₁₂O₃₂(CN)]⁵⁻. In the CH₃NO₂ solution, cyanate abstracts protons from CH₃NO₂, and the resultant CH₂NO₂⁻ is stabilized in V12 to form [V₁₂O₃₂(CH₂NO₂)]⁵⁻ (V12(CH₂NO₂)). A crystallographic analysis revealed the double-bond characteristic short bond distance of 1.248 Å between the carbon and nitrogen atoms in the nitromethane anion in V12. ¹H and ¹³C NMR studies showed that the nitromethane anion in V12 must not be exchanged with the nitromethane solvent. Thus, the V12 container restrains the reactivity of anionic species.     

Stimuli Responsive Materials Supported by Orthogonal Hydrogen and Halogen Bonding or I···Alkene Interaction

Smart materials represent an elegant class of (macro)-molecules endowed with the ability to react to chemical/physical changes in the environment. Herein, we prepared new photo responsive azobenzenes possessing halogen bond donor groups. The X-ray structures of two molecules highlight supramolecular organizations governed by unusual noncovalent bonds. In azo dye I-azo-NO₂, the nitro group is engaged in orthogonal H···O···I halogen and hydrogen bonding, linking the units in parallel undulating chains. As far as compound I–azo–NH–MMA is concerned, a non-centrosymmetric pattern is formed due to a very rare I···π interaction involving the alkene group supplemented by hydrogen bonds. The Cambridge Structural Database contains only four structures showing the same I···CH₂=C contact. For all compounds, an ¹⁹F-NMR spectroscopic analysis confirms the formation of halogen bonds in solution through a recognition process with chloride anion, and the reversible photo-responsiveness is demonstrated upon exposing a solution to UV light irradiation. Finally, the intermediate I–azo–NH₂ also shows a pronounced color change due to pH variation. These azobenzenes are thereby attractive building blocks to design future multi-stimuli responsive materials for highly functional devices.     

Tetrel Bonds between Phenyltrifluorosilane and Dimethyl Sulfoxide: Influence of Basis Sets,Substitution and Competition

Ab initio calculations have been performed for the complexes of DMSO and phenyltrifluorosilane (PTS) and its derivatives with a substituent of NH₃, OCH₃, CH₃, OH, F, CHO, CN, NO₂, and SO₃H. It is necessary to use sufficiently flexible basis sets, such as aug’-cc-pVTZ, to get reliable results for the Si···O tetrel bonds. The tetrel bond in these complexes has been characterized in views of geometries, interaction energies, orbital interactions and topological parameters. The electron-donating group in PTS weakens this interaction and the electron-withdrawing group prominently strengthens it to the point where it exceeds that of the majority of hydrogen bonds. The largest interaction energy occurs in the p-HO₃S-PhSiF₃···DMSO complex, amounting to −122 kJ/mol. The strong Si···O tetrel bond depends to a large extent on the charge transfer from the O lone pair into the empty p orbital of Si, although it has a dominant electrostatic character. For the PTS derivatives of NH₂, OH, CHO and NO₂, the hydrogen bonded complex is favorable to the tetrel bonded complex for the NH₂ and OH derivatives, while the σ-hole interaction prefers the π-hole interaction for the CHO and NO₂ derivatives.     

Self-Assembly by Tridentate or Bidentate Ligand: Synthesis and Vapor Adsorption Properties of Cu(II), Zn(II), Hg(II) and Cd(II) Complexes Derived from a Bis(pyridylhydrazone) Compound

Four complexes, [Cu₄L₂(OCH₃)₂(CH₃OH)₂]·2H₂O (1), [Zn₂L₂Cl₄]·2H₂O·2CH₃OH (2), [Hg₂L₂Br₄]·4CH₃OH (3), and {[CdL₂Cl₂]·4H₂O·4CH₃OH}_n (4), have been synthesized and characterized from a bis(pyridylhydrazone) ligand (L) with copper(II), zinc(II), mercury(II) or cadmium(II), respectively. Complex 1 exists as a centrosymmetric tetranuclear dimer with L as deprotonated tridentate ligand. Complexes 2 and 3 exist as centrosymmetric metallamacrocycles with L as bidentate ligand. Complex 4 exists as a 1D looped-chain coordination polymer. The thermal stabilities and vapor adsorption properties of the four complexes were investigated as well.     

Valorization of Different Fractions from Butiá Pomace by Pyrolysis: H2 Generation and Use of the Biochars for CO2 Capture

This work valorizes butiá pomace (Butia capitata) using pyrolysis to prepare CO₂ adsorbents. Different fractions of the pomace, like fibers, endocarps, almonds, and deoiled almonds, were characterized and later pyrolyzed at 700 °C. Gas, bio-oil, and biochar fractions were collected and characterized. The results revealed that biochar, bio-oil, and gas yields depended on the type of pomace fraction (fibers, endocarps, almonds, and deoiled almonds). The higher biochar yield was obtained by endocarps (31.9%wt.). Furthermore, the gas fraction generated at 700 °C presented an H₂ content higher than 80%vol regardless of the butiá fraction used as raw material. The biochars presented specific surface areas reaching 220.4 m² g⁻¹. Additionally, the endocarp-derived biochar presented a CO₂ adsorption capacity of 66.43 mg g⁻¹ at 25 °C and 1 bar, showing that this material could be an effective adsorbent to capture this greenhouse gas. Moreover, this capacity was maintained for 5 cycles. Biochars produced from butiá precursors without activation resulted in a higher surface area and better performance than some activated carbons reported in the literature. The results highlighted that pyrolysis could provide a green solution for butiá agro-industrial wastes, generating H₂ and an adsorbent for CO₂.     

Tunable Diode Laser Absorption Studies of Hydrocarbons in RF Plasmas Containing Hexamethyldisiloxane

Tunable infrared diode laser absorption spectroscopy has been used to detect the methyl radical and three stable molecules, CH₄, C₂H₂ and C₂H₆, in radio frequency plasmas (f=13.56 MHz) containing hexamethyldisiloxane (HMDSO). The methyl radical concentration and the concentration of the stable hydrocarbons, produced in the plasma, have been measured in pure HMDSO discharges and with admixtures of Ar, while discharge power (P=20–200 W), total gas pressure (p=0.08–0.6 mbar), gas mixture and total gas flow rate (=1–10 sccm) were varied. The methyl radical concentration was found to be in the range of 10¹³ molecules cm^-3, while methane and ethane are the dominant hydrocarbons with concentrations of 10¹⁴–10¹⁵ mol cm^-3. Conversion rates to the measured stable hydrocarbons (RC(C_xH_y): 2×10¹²–2×10¹⁶ molecules J^-1 s^-1) could be estimated in dependence on power, flow, mixture and pressure. Under the used experimental conditions a maximum deposition rate of polymer layers of about 400 nm min^-1 has been found.     

Improved Synthesis of CsN3

Cesium azide can conveniently be prepared from anhydrous CsF and (CH₃)₃SiN₃ in SO₂ solvent in high purity and yield. In this reaction, the initially generated SO₂F^— anion is converted in SO₂ solvent to solvated azide, (SO₂)_nN₃^—, which is labile and releases SO₂ under dynamic vacuum yielding pure CsN₃.     

Lithiated γ-O-functionalized propyl phenyl sulfides and sulfones of the type Li[CH(SOxPh)CH2CH2OR] (x = 0, 2). [Li{CH(SPh)CH2CH2Ot-Bu}(tmeda)] – A structurally characterized organolithium inner complex

Lithiation of O-functionalized alkyl phenyl sulfides PhSCH₂CH₂CH₂OR (R = Me, 1a; i-Pr, 1b; t-Bu, 1c; CPh₃, 1d) with n-BuLi/tmeda in n-pentane resulted in the formation of α- and ortho-lithiated compounds [Li{CH(SPh)CH₂CH₂OR}(tmeda)] (α-2a–d) and [Li{o-C₆H₄SCH₂CH₂CH₂OR)(tmeda)] (o-2a–d), respectively, which has been proved by subsequent reaction with n-Bu₃SnCl yielding the requisite stannylated γ-OR-functionalized propyl phenyl sulfides n-Bu₃SnCH(SPh)CH₂CH₂OR (α-3a–d) and n-Bu₃Sn(o-C₆H₄SCH₂CH₂CH₂OR) (o-3a–d). The α/ortho ratios were found to be dependent on the sterical demand of the substituent R. Stannylated alkyl phenyl sulfides α-3a–c were found to react with n-BuLi/tmeda and n-BuLi yielding the pure α-lithiated compounds α-2a–c and [Li{CH(SPh)CH₂CH₂OR}] (α-4a–b), respectively, as white to yellowish powders. Single-crystal X-ray diffraction analysis of [Li{CH(SPh)CH₂CH₂Ot-Bu}(tmeda)] (α-2c) exhibited a distorted tetrahedral coordination of lithium having a chelating tmeda ligand and a C,O coordinated organyl ligand. Thus, α-2c is a typical organolithium inner complex.Lithiation of O-functionalized alkyl phenyl sulfones PhSO₂CH₂CH₂CH₂OR (R = Me, 5a; i-Pr, 5b; CPh₃, 5c) with n-BuLi resulted in the exclusive formation of the α-lithiated products Li[CH(SO₂Ph)CH₂CH₂OR] (6a–c) that were found to react with n-Bu₃SnCl yielding the requisite α-stannylated compounds n-Bu₃SnCH(SO₂Ph)CH₂CH₂OR (7a–c). The identities of all lithium and tin compounds have been unambiguously proved by NMR spectroscopy (¹H, ¹³C, ¹¹⁹Sn).     

Temperature and Inoculum Origin Influence the Performance of Ex-Situ Biological Hydrogen Methanation

The conversion of H₂ into methane can be carried out by microorganisms in a process so-called biomethanation. In ex-situ biomethanation H₂ and CO₂ gas are exogenous to the system. One of the main limitations of the biomethanation process is the low gas-liquid transfer rate and solubility of H₂ which are strongly influenced by the temperature. Hydrogenotrophic methanogens that are responsible for the biomethanation reaction are also very sensitive to temperature variations. The aim of this work was to evaluate the impact of temperature on batch biomethanation process in mixed culture. The performances of mesophilic and thermophilic inocula were assessed at 4 temperatures (24, 35, 55 and 65 °C). A negative impact of the low temperature (24 °C) was observed on microbial kinetics. Although methane production rate was higher at 55 and 65 °C (respectively 290 ± 55 and 309 ± 109 mL CH₄/L.day for the mesophilic inoculum) than at 24 and 35 °C (respectively 156 ± 41 and 253 ± 51 mL CH₄/L.day), the instability of the system substantially increased, likely because of a strong dominance of only Methanothermobacter species. Considering the maximal methane production rates and their stability all along the experiments, an optimal temperature range of 35 °C or 55 °C is recommended to operate ex-situ biomethanation process.     

Bile-Acid-Appended Triazolyl Aryl Ketones: Design,Synthesis, In Vitro Anticancer Activity and Pharmacokinetics in Rats

A library of bile-acid-appended triazolyl aryl ketones was synthesized and characterized by detailed spectroscopic techniques such as ¹H and ¹³C NMR, HRMS and HPLC. All the synthesized conjugates were evaluated for their cytotoxicity at 10 µM against MCF-7 (human breast adenocarcinoma) and 4T1 (mouse mammary carcinoma) cells. In vitro cytotoxicity studies on the synthesized conjugates against MCF-7 and 4T1 cells indicated one of the conjugate 6cf to be most active against both cancer cell lines, with IC₅₀ values of 5.71 µM and 8.71 µM, respectively, as compared to the reference drug docetaxel, possessing IC₅₀ values of 9.46 µM and 13.85 µM, respectively. Interestingly, another compound 6af (IC₅₀ = 2.61 µM) was found to possess pronounced anticancer activity as compared to the reference drug docetaxel (IC₅₀ = 9.46 µM) against MCF-7. In addition, the potent compounds (6cf and 6af) were found to be non-toxic to normal human embryonic kidney cell line (HEK 293), as evident from their cell viability of greater than 86%. Compound 6cf induces higher apoptosis in comparison to 6af (46.09% vs. 33.89%) in MCF-7 cells, while similar apoptotic potential was observed for 6cf and 6af in 4T1 cells. The pharmacokinetics of 6cf in Wistar rats showed an MRT of 8.47 h with a half-life of 5.63 h. Clearly, these results suggest 6cf to be a potential candidate for the development of anticancer agents.     

Well-defined silica supported aluminum hydride: another step towards the utopian single site dream?

Reaction of triisobutylaluminum with SBA15₇₀₀ at room temperature occurs by two parallel pathways involving either silanol or siloxane bridges. It leads to the formation of a well-defined bipodal [(SiO)₂Al–CH₂CH(CH₃)₂] 1a, silicon isobutyl [Si–CH₂CH(CH₃)₂] 1b and a silicon hydride [Si–H] 1c. Their structural identity was characterized by FT-IR and advanced solid-state NMR spectroscopies (¹H, ¹³C, ²⁹Si, ²⁷Al and 2D multiple quantum), elemental and gas phase analysis, and DFT calculations. The reaction involves the formation of a highly reactive monopodal intermediate: [SiO–Al–[CH₂CH(CH₃)₂]₂], with evolution of isobutane. This intermediate undergoes two parallel routes: transfer of either one isobutyl fragment or of one hydride to an adjacent silicon atom. Both processes occur by opening of a strained siloxane bridge, Si–O–Si but with two different mechanisms, showing that the reality of “single site” catalyst may be an utopia: DFT calculations indicate that isobutyl transfer occurs via a simple metathesis between the Al-isobutyl and O–Si bonds, while hydride transfer occurs via a two steps mechanism, the first one is a β-H elimination to Al with elimination of isobutene, whereas the second is a metathesis step between the formed Al–H bond and a O–Si bond. Thermal treatment of 1a (at 250 °C) under high vacuum (10^–5 mbar) generates Al–H through a β-H elimination of isobutyl fragment. These supported well-defined Al–H which are highly stable with time, are tetra, penta and octa coordinated as demonstrated by IR and ²⁷Al–¹H J-HMQC NMR spectroscopy. All these observations indicate that surfaces atoms around the site of grafting play a considerable role in the reactivity of a single site system.     

Simple analyzer for continuous monitoring of sulfur dioxide in gas streams

The construction, optimization and use of simple and inexpensive gas analyzer for real time measurement of sulfur dioxide in gas streams are described. The analyzer consisted of three main components (i) a custom fabricated hollow fiber membrane (HFM) gas contactor, (ii) carrier solution which absorbs SO₂ molecules from the gas stream in the HFM gas contactor and (iii) a flow-through detector placed downstream which continuously measures the changes occurred to the carrier solution upon absorption of SO₂ molecules. The significant acidic properties of the produced sulfurous acid suggested pH and conductivity detectors to monitor the decrease in pH or the increase in the conductivity which constituted the basis for quantification of SO₂ in the gas line. Aqueous potassium oxalate (10^? 1 mol/L) and hydrogen peroxide (10^? 3 mol/L) were used as carrier solutions in combination with pH and conductivity detectors, respectively. The analyzer equipped with pH detector provided linear potentiometric response to SO₂ concentration up to 1000 ppm with Nernstian slop of 61 mV/log[SO₂]. Excellent SO₂ recoveries (97–108%) were obtained in the presence of several folds of potentially interfering acidic gases, i.e., CO₂ and H₂S. The conductivity detector provided linear response up to 2500 ppm. Under optimized conditions, both detectors offered several favorable performance characteristics such as (i) fast response and recovery times, (ii) excellent signal stability and reproducibility (RSD = 0.5%), (iii) intrinsic high selectivity to most common neutral gases, e.g., CH₄, N₂, O₂, CO, etc. The suggested analyzer was applied successfully in monitoring the removal of SO₂ from SO₂–N₂ gas mixtures with hollow fiber membrane contactor using distilled water or aqueous sodium hydroxide as stripping solvents.