脉冲沉积制备Cu2O/TiO2纳米管异质结的可见光光催化性能

在用阳极氧化法制备有序排列TiO₂纳米管阵列薄膜的基础上,引入脉冲沉积工艺,成功实现了均匀、弥散分布的Cu₂O纳米颗粒修饰改性TiO₂纳米管阵列,形成Cu₂O/TiO₂ 纳米管异质结复合材料. 利用场发射扫描电镜（FESEM）、场发射透射电镜（FETEM）、X射线衍射（XRD）、X射线光电子能谱（XPS）和紫外-可见漫反射光谱（UV-Vis DRS）对样品进行表征,重点研究了Cu₂O/TiO₂ 纳米管异质结的光电化学特性和对甲基橙（MO）的可见光催化降解性能. 结果表明,Cu₂O纳米颗粒均匀附着在TiO₂纳米管阵列的管口和中部位置,所制备的Cu₂O/TiO₂ 纳米管异质结具有高效的可见光光催化性能;在浓度为0.01 mol·L^-1的CuSO₄溶液中制得的Cu₂O/TiO₂纳米管异质结表现出最好的电化学特性和光催化性能;另外,对Cu₂O纳米颗粒影响光催化活性的机理进行了讨论.     

Facilely anchoring Cu2O nanoparticles on mesoporous TiO2 nanorods for enhanced photocatalytic CO2 reduction through efficient charge transfer

Semiconductor-employed photocatalytic CO₂ reduction has been regarded as a promising approach for environmental-friendly conversion of CO₂ into solar fuels. Herein, TiO₂/Cu₂O composite nanorods have been successfully fabricated by a facile chemical reduction method and applied for photocatalytic CO₂ reduction. The composition and structure characterization indicates that the Cu₂O nanoparticles are coupled with TiO₂ nanorods with an intimate contact. Under light illumination, all the TiO₂/Cu₂O composite nanorods enhance the photocatalytic CO₂ reduction. In particular, the TiO₂/Cu₂O-15% sample exhibits the highest CH₄ yield (1.35 µmol g^-1 h^-1) within 4 h irradiation, and it is 3.07 and 15 times higher than that of pristine TiO₂ nanorods and Cu₂O nanoparticles, respectively. The enhanced photoreduction capability of the TiO₂/Cu₂O-15% is attributed to the intimate construction of Cu₂O nanoparticles on TiO₂ nanorods with formed p-n junction to accelerate the separation of photogenerated electron-hole pairs. This work provides a reference for rational design of a p-n heterojunction photocatalyst for CO₂ photoreduction.     

TiO2/Cu2O Core/Ultrathin Shell Nanorods as Efficient and Stable Photocatalysts for Water Reduction

P‐type Cu₂O has been long considered as an attractive photocatalyst for photocatalytic water reduction, but few successful examples has been reported. Here, we report the synthesis of TiO₂ (core)/Cu₂O (ultrathin film shell) nanorods by a redox reaction between Cu²⁺ and in‐situ generated Ti³⁺ when Cu²⁺‐exchanged H‐titanate nanotubes are calcined in air. Owing to the strong TiO₂‐Cu₂O interfacial interaction, TiO₂ (core)/Cu₂O (ultrathin film shell) nanorods are highly active and stable in photocatalytic water reduction. The TiO₂ core and Cu₂O ultrathin film shell respectively act as the photosensitizer and cocatalyst, and both the photoexcited electrons in the conduction band and the holes in the valence band of TiO₂ respectively transfer to the conduction band and valence band of the Cu₂O ultrathin film shell. Our results unambiguously show that Cu₂O itself can act as the highly active and stable cocatalyst for photocatalytic water reduction.     

Simultaneous Tuning Band Gaps of Cu2O and TiO2 to Form S-Scheme Hetero-Photocatalyst

Photocatalytic Z or S scheme merits higher redox potentials and faster charge separation. However, heterostructure photocatalysts with band gaps of bulk materials often have a type I band structure leading to poor photocatalytic activity. In view of this, we report simultaneous tuning of band gaps of Cu₂O and TiO₂, where quantum dot Cu₂O nanoparticles were formed on doped TiO₂ with Ti³⁺. The reduced size of Cu₂O made its conduction band more negative, whereas the introduction of Ti³⁺ made the absorption edge red shift to the visible light region. The as-formed heterostructure enabled an S-Scheme mechanism with remarkable activity and stability for visible light photodegradation of 4-chlorophenol (4-CP). The as-obtained photocatalysts’ activity demonstrated ca. 510-fold increase as compared to individual ones and a mechanical blend. The as-obtained photocatalysts maintained over 80 % for 5 cycles and 2 months exposure to O₂ did not decrease the degradation rate. ESR characterization and scavenger experiments proved the S-Scheme mechanism.     

Bi2Ti2O7/TiO2复合纤维：原位水热合成及光催化性能

采用静电纺丝技术制备的TiO2纤维作为模板和反应物,通过原位水热合成了具有异质结构的Bi2Ti2O7/TiO2复合纤维。利用X射线衍射(XRD)、扫描电镜(SEM)、能量散射光谱(EDS)、高分辨透射电镜(HRTEM)和紫外可见吸收光谱(UV-Vis)等分析测试手段对样品的结构和形貌进行表征。以罗丹明B为模拟有机污染物进行光催化降解实验。结果表明:花状Bi2Ti2O7纳米结构均匀地生长在TiO2纤维上,制备了Bi2Ti2O7与TiO2相复合的光催化材料,其光谱响应范围拓宽至可见光区,与纯TiO2纤维相比可见光催化活性显著提高,且易于分离、回收和循环使用。初步探讨了Bi2Ti2O7/TiO2异质结的生长机制和光催化活性提高机理。     

钛、铝和玻璃上TiO2光催化膜的失活研究

采用浸渍提拉法，在平行条件下制备了钛、铝和玻璃载体上的TiO₂膜TiO₂ / Ti、TiO₂ / Al和TiO₂ / G，利用X射线光电子能谱(XPS)、原子力显微镜(AFM)和光催化降解实验等手段对膜样品进行了表征和活性评价。实验结果表明，在铝和玻璃基材上制膜时发生了显著的基材元素溢出，使各膜样品的化学组成不同，同时TiO₂粒子和膜表面形貌也因前驱物烧结行为不同而差异较大。TiO_{2相似文献}   

Cu?Cu2O?TiO2 Nanojunction Systems with an Unusual Electron–Hole Transportation Pathway and Enhanced Photocatalytic Properties

Multicomponent Cu? Cu₂O? TiO₂ nanojunction systems were successfully synthesized by a mild chemical process, and their structure and composition were thoroughly analyzed by X‐ray diffraction, transmission electron microscopy, field‐emission scanning electron microscopy, and X‐ray photoelectron spectroscopy. The as‐prepared Cu? Cu₂O? TiO₂ (3 and 9 h) nanojunctions demonstrated higher photocatalytic activities under UV/Vis light irradiation in the process of the degradation of organic compounds than those of the Cu? Cu₂O, Cu? TiO₂, and Cu₂O? TiO₂ starting materials. Moreover, time‐resolved photoluminescence spectra demonstrated that the quenching times of electrons and holes in Cu? Cu₂O? TiO₂ (3 h) is higher than that of Cu? Cu₂O? TiO₂ (9 h); this leads to a better photocatalytic performance of Cu? Cu₂O? TiO₂ (3 h). The improvement in photodegradation activity and electron–hole separation of Cu? Cu₂O? TiO₂ (3 h) can be ascribed to the rational coupling of components and dimensional control. Meanwhile, an unusual electron–hole transmission pathway for photocatalytic reactions over Cu? Cu₂O? TiO₂ nanojunctions was also identified.     

Preparation of Ag3PO4/TiO2(B) Heterojunction Nanobelt with Extended Light Response and Enhanced Photocatalytic Performance

Photocatalytic degradation, as an emerging method to control environmental pollution, is considered one of the most promising environmental purification technologies. As Tibet is a region with some of the strongest solar radiation in China and even in the world, it is extremely rich in solar energy resources, which is ideal for applying photocatalytic technology to its ecological environment protection and governance. In this study, Na₂Ti₃O₇ nanobelts were prepared via a hydrothermal method and converted to TiO₂∙xH₂O ion exchange, which was followed by high-temperature calcination to prepare TiO₂(B) nanobelts (“B” in TiO₂(B) means “Bronze phase”). A simple in situ method was used to generate Ag₃PO₄ particles on the surface of the TiO₂ nanobelts to construct a Ag₃PO₄/TiO₂(B) heterojunction composite photocatalyst. By generating Ag₃PO₄ nanoparticles on the surface of the TiO₂(B) nanobelts to construct heterojunctions, the light absorption range of the photocatalyst was successfully extended from UV (ultraviolet) to the visible region. Furthermore, the recombination of photogenerated electron–hole pairs in the catalyst was inhibited by the construction of the heterojunctions, thus greatly enhancing its light quantum efficiency. Therefore, the prepared Ag₃PO₄/TiO₂(B) heterojunction composite photocatalyst greatly outperformed the TiO₂(B) nanobelt in terms of photocatalytic degradation.     

Photocatalytic Activity of High Aspect Ratio TiO2 Nanorods

In this article, TiO₂ nanorods (aspect ratio >20) were prepared through a polyol process and doped with metal ions (Cu²⁺, Ni²⁺, Fe³⁺, and Cr³⁺). Compared with TiO₂ nanoparticles, the TiO₂ nanorods displayed relatively higher photocatalytic activity for the degradation of copper sulfophthalocyanine. Moreover, the photocatalytic activity was greatly enhanced when the metal ions were doped in the TiO₂ nanorods.     

氮掺杂纳米多孔TiO2∶EDTA-Na2辅助水热合成及光催化性能

利用螯合剂乙二胺四乙酸二钠(EDTA-Na₂)作为致孔剂,以三氯化钛(TiCl₃)为前驱体,利用水热法直接合成了氮掺杂的纳米多孔TiO₂。通过 SEM、XRD、IR、低温N2吸附-脱附、XPS、热重分析(TG)和紫外可见(UV)光谱对样品进行了表征与分析。结果表明所合成TiO₂以锐钛矿相形式存在,氮掺在TiO₂晶面之间,具有典型的介孔结构和较高的比表面积,通过改变EDTA-Na₂的浓度,比表面积可控制在95~216 m²·g^-1之间。这种纳米多孔TiO₂在光降解甲基橙的实验中表现出很好的光催化活性,且随着EDTA-Na₂的浓度增大而逐渐增加。     

Photocatalytic production of hydrogen from water–alcohol media with the participation of mesoporous TiO<Subscript>2</Subscript>

Samples of mesoporous TiO₂ containing 80-85% of anatase and 15-20% of rutile with average particle and pore sizes of ∼10 nm and specific surface areas of 70 m²/g were obtained. The nanohetero structures TiO₂/Cu formed during photocatalytic reduction of Cu^II exhibit photocatalytic activity in the release of hydrogen from water–ethanol mixtures. The quantum yield with respect to atomic hydrogen amounts to 1.5.     

TiO2/Cu2O/Pt复合空心微球的制备及其光催化性能

以锐钛矿相TiO₂溶胶为基底,采用沉淀法和液相沉积法制备了TiO₂/Cu₂O/Pt复合空心微球,通过改变n_Ti⁴⁺∶ n_Cu²⁺和H₂PtCl₆·6 H₂O溶液的加入量对TiO₂的形貌和结构进行调控,采用不同的方法对不同样品的物相及结构、微观形貌和光学性能进行了对比分析。分析结果表明,复合材料中Pt与Cu₂O的引入产生协同效应,不仅在一定程度上阻止了电子-空穴的复合,还降低了禁带宽度,在可见光区域光吸收明显增强。与TiO₂、Cu₂O和TiO₂/Cu₂O光催化剂相比较,TiO₂/Cu₂O/Pt降解有机污染物的能力显著增强,首次光照120 min可降解93%的甲基橙(MO)溶液,4次循环后降解率为71%,具有良好的光催化稳定性能。     

TiO2/Cu2O/Pt复合空心微球的制备及其光催化性能

以锐钛矿相TiO₂溶胶为基底,采用沉淀法和液相沉积法制备了TiO₂/Cu₂O/Pt复合空心微球,通过改变n₍Ti⁴⁺)∶n_Cu2+和H₂Pt Cl₆·6H₂O溶液的加入量对TiO₂的形貌和结构进行调控,采用不同的方法对不同样品的物相及结构、微观形貌和光学性能进行了对比分析。分析结果表明,复合材料中Pt与Cu₂O的引入产生协同效应,不仅在一定程度上阻止了电子-空穴的复合,还降低了禁带宽度,在可见光区域光吸收明显增强。与TiO₂、Cu₂O和TiO₂/Cu₂O光催化剂相比较,TiO₂/Cu₂O/Pt降解有机污染物的能力显著增强,首次光照120 min可降解93%的甲基橙(MO)溶液,4次循环后降解率为71%,具有良好的光催化...     

DFT Investigations of Aun Nano-Clusters Supported on TiO2 Nanotubes: Structures and Electronic Properties

TiO₂ nanotubes (TiO₂NTs) are beneficial for photogenerated electron separation in photocatalysis. In order to improve the utilization rate of TiO₂NTs in the visible light region, an effective method is to use Au_n cluster deposition-modified TiO₂NTs. It is of great significance to investigate the mechanism of Au_n clusters supported on TiO₂NTs to strengthen its visible-light response. In this work, the structures, electronic properties, Mulliken atomic charge, density of states, band structure, and deformation density of Au_n (n = 1, 8, 13) clusters supported on TiO₂NTs were investigated by DMOL3. Based on published research results, the most stable adsorption configurations of Au_n (n = 1, 8, 13) clusters supported with TiO₂NTs were obtained. The adsorption energy increased as the number of Au adatoms increased linearly. The Au_n clusters supported on TiO₂NTs carry a negative charge. The band gaps of the three most stable structures of each adsorption system decreased compared to TiO₂NTs; the valence top and the conduction bottom of the Fermi level come mainly from the contribution of 5d and 6s-Au. The electronic properties of the 5d and 6s impurity orbitals cause valence widening and band gap narrowing.     

Cyclohexanol dehydrogenation over Cu-loaded TiO2 photocatalyst under solar illumination

Abstract  

The liquid-phase selective dehydrogenation of cyclohexanol has been investigated using two classes of catalyst containing either Cu₂O or CuO on TiO₂ under solar light in deaerated conditions at room temperature using acetonitrile medium in a batch reactor. The effect on dehydrogenation of three conditions, cyclohexanol concentration, copper loading on TiO₂, and amount of catalyst, were investigated. The maximum yield of cyclohexanone obtained was 40%. The catalysts were characterized by XRD, UV–DRS, TEM, SEM–EDAX, and XPS. It was found that 1% (w/w) Cu₂O/TiO₂ was 100% selective for photocatalytic dehydrogenation of cyclohexanol.     

Ternary BiOBr/TiO2/Ti3C2Tx MXene nanocomposites with heterojunction structure and improved photocatalysis performance

The rational design and construction of heterojunction structure is an effective strategy to improve the photocatalytic performance. Herein, a series of BiOBr nanosheets-immobilized TiO₂/Ti₃C₂T_x MXene hybrid materials with heterojunction structure were synthesized by a facial one-step hydrothermal method. The ternary composites show outstanding performance as photocatalysts for the degradation of rhodamine B due to the optimized synergetic effects of BiOBr, TiO₂ and Ti₃C₂T_x. The improved photocatalytic performance is remarkably attributed to the construction of a heterojunction between TiO₂ and BiOBr due to their well-matching of energy band position, which can enhance the absorption for visible light and promote the transfer of photo-generated charge carriers. Moreover, Ti₃C₂T_x acts as an electron trap to further accelerate the separation of photo-generated electrons and holes.     

Development of TiO<Subscript>2</Subscript> photocatalysts suitable for practical use and their applications in environmental cleanup

Recently, environmental disruption is proceeding on a global scale through the consumption of huge amounts of fossil fuels and the emission of various chemical substances. However, these substances resist bio-treatment. TiO₂ generates electrons and holes by irradiation with light. Most organic micro-pollutants, including dioxins, are decomposed into carbon dioxide and water by the effect of the holes with high oxidative potential. By using such a photocatalytic reaction, various applications are feasible for environmental cleanup. In general, TiO₂ powder has been utilized as photocatalyst, although TiO₂ powder photocatalyst has several disadvantages: (1) it is difficult to handle, (2) photocatalytic reaction is slow and it takes a lot of time for treatment and (3) it is difficult to apply to plastics and textiles, because the photocatalyst decomposes them. We have developed a photocatalyst suitable for practical use and have developed high-activity photocatalysts such as TiO₂ photocatalytic transparent film, photocatalytic silica-gel, apatite-coated TiO₂ photocatalyst usable for plastics and textiles, photocatalytic paper, photocatalytic blue charcoal and photocatalytic oxygen scavenger. The application of these high-activity photocatalysts has been studied in deodorization, anti-bacterial, self-cleaning, anti-stain, water treatment, air purification such as photocatalytic decomposition of dioxins and VOC, and NO _x removal. Now various photocatalytic articles using these new photocatalyst materials are on the market in Japan. Photocatalytic technology can create many valuable products for environmental use all over the world.     

Modifications on reduced titanium dioxide photocatalysts: A review

A large variety of reduced titanium dioxide (TiO_2-x) materials have been reported recently. Reduced TiO₂, usually resulting from the removal of oxygen atoms or hydrogen incorporation, is proved to be efficient for achieving highly photocatalytic performance including photodegradation of organic compounds, hydrogen generation from water splitting, CO₂ reduction for CH₄ evolution, solar cells, etc. To further improve the properties and activities of TiO_2-x, a combination of the Ti³⁺ self-doping and other traditional modifications like nonmetals doping has been proposed in the past decades. This paper provides a general and critical review on the further modifications on reduced TiO₂ samples, including non-metal elements (N, B, S, F and I) doping, noble-metal (Au, Pt, Pd and Ag) and iron-group metal (Fe, Co and Ni) grafting, metal oxide compositing, carbon (nanotubes and graphene) and carbon-based-material compositing, special facets exposure (mainly dual {001}-{101} and {111}-{110} facets) of TiO_2-x and ordered structure controlling of TiO_2-x. These modifications enhance the physical and/or chemical properties of the reduced TiO₂, or create new features for the modified TiO_2-x samples, which finally leads to the enhancement of photocatalytic performance. Key examples such as N-doping, Au grafting and graphene-based compositing are discussed carefully, and the mechanisms for solar light enhancement, electron transfer and charge separation are also investigated. Finally, some challenging issues on TiO_2-x catalysts are also proposed to encourage new approaches for preparation of TiO_2-x catalysts with efficiently photocatalytic performance.     

具有高可见光催化活性的Ti3+和碳共掺杂改性的TiO2光催化剂

以乙醇为碳源,采用操作简单的真空活化法一步实现对TiO₂的Ti³⁺与C的共掺杂改性,TiO₂用X衍线衍射、紫外-可见光谱、顺磁共振、X射线光电子能谱和红外光谱等手段表征了催化剂的结构、组成、光学性质. 结果表明, 经Ti³⁺与C共掺杂改性后的催化剂表现出高的可见光降解甲基橙活性. 复合在催化剂表面的石墨可以增强催化剂对可见光的响应范围,而Ti³⁺与氧缺陷形成的掺杂能级则可以提高光生电子的迁移效率. 实验表明,两者之间的协同作用促进了其可见光催化活性的提高.     

中空Ta2O5/TiO2复合光催化剂的可控氧化制备及性能

以钛粉、钽粉为原料,炭黑作为反应性模板,通过熔盐法在炭黑表面原位生长了TaTiC₂纳米碳化物涂层,并以所得TaTiC₂/C复合物为碳化物前驱体,再经可控氧化制备出中空Ta₂O₅/TiO₂复合光催化剂。采用X射线粉末衍射（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）、紫外-可见（UV-Vis）漫反射（DRS）及N₂物理吸附等手段对所制备的光催化剂进行形貌、显微结构及孔结构表征。以高压汞灯为紫外光源,以亚甲基蓝为目标降解物,通过光催化降解实验评价中空Ta₂O₅/TiO₂复合光催化剂的光催化活性。结果表明,熔盐法生长碳化物涂层厚度均匀（20~30 nm）,碳化物主要以TaTiC₂晶相存在且具有纳米级的颗粒尺寸。中空Ta₂O₅/TiO₂复合光催化剂同时具有200 nm左右的中空大孔结构及壳层10 nm左右的介孔结构。中空大孔和介孔的存在提高了所制备催化剂对亚甲基蓝的吸附能力。此外,TiO₂与Ta₂O₅通过电子能带结构的耦合,有效提高了光生电子和空穴的分离效率,从而显著提高了光催化活性。n_Ti∶n_Ta=2.5∶1.5时,相应的中空Ta₂O₅/TiO₂复合光催化剂表现出最佳的光催化活性,对亚甲基蓝的紫外光催化降解率高达97%。