Elaboration of chitosan-coated nanoparticles loaded with curcumin for mucoadhesive applications

Polycaprolactone (PCL) nanoparticles decorated with a mucoadhesive polysaccharide chitosan (CS) containing curcumin were developed aiming the buccal delivery of this drug. These nanoparticles were prepared by the nanoprecipitation method using different molar masses and concentrations of chitosan and concentrations of triblock surfactant poloxamer (PEO-PPO-PEO), in order to optimize the preparation conditions. Chitosan-coated nanoparticles showed positive surface charge and a mean particle radius ranging between 114 and 125 nm, confirming the decoration of the nanoparticles with the mucoadhesive polymer, through hydrogen bonds between ether and amino groups from PEO and CS, respectively. Dynamic Light Scattering (DLS) studies at different scattering angles and concentrations have shown that the nanoparticles are monodisperse (polydispersity indices were lower than 0.3). The nanoparticle systems were also examined with Nanoparticle Tracking Analysis (NTA), and the results were in good agreement with those obtained by DLS. Colloidal systems showed mean drug content about 460 μg/mL and encapsulation efficiency higher than 99%. Finally, when coated with chitosan, these nanoparticles show a great ability to interact with mucin indicating also their suitability for mucoadhesive applications.     

Polymer-coated gold island films as localized plasmon transducers for gas sensing

Ultrathin (typically < or = 10-nm thick) gold island films evaporated on transparent substrates show a prominent localized surface plasmon (SP) extinction in the visible-to-NIR range. Changes in the dielectric properties of the contacting medium influence the SP absorption band, providing a scheme for optical sensing based on refractive index change. In the present work, the gas sensing capability of gold island based localized surface plasmon resonance (LSPR) transducers was explored using polymeric coatings as the active interface. LSPR transducers were fabricated by spin-coating of polystyrene (PS) or polystyrene sulfonic acid, sodium salt (PSS) onto 5-nm-thick (nominal thickness) gold island films evaporated on silanized glass and annealed. Detailed characterization of the transducers was carried out using high-resolution scanning electron microscopy, cross-sectional transmission electron microscopy, and in situ atomic force microscopy under controlled atmosphere. The hydrophobic PS film exhibits swelling and significant thickness increase upon exposure to chloroform vapor and little or no change in water vapor, whereas the hydrophilic PSS film shows the opposite behavior when exposed to the same vapors. Polymer swelling upon absorption of vapors of good solvents shows a net effect of lowering the effective refractive index in the vicinity of the gold islands, manifested as a characteristic decrease of the SP band intensity and a blue shift of the band maximum. The response, measured for four different vapors, is fast (approximately 15 s) and reversible. It is shown that gold island systems coated with polymeric films can be applied to vapor recognition in an array configuration.     

Chitosan and a modified chitosan as agents to improve performances of mucoadhesive vaginal gels

New mucoadhesive formulations were designed and studied in order to improve local vaginal therapy by increasing formulation retention prolonging thus drug-mucosa contact time. Some gels were prepared using hydroxyethylcellulose (HEC) alone or mixed with chitosan (CS) or its derivative 5-methyl-pyrrolidinone-chitosan (MPCS) and were loaded with the antibacterial metronidazole (MET) (0.75%). All formulations showed pseudoplastic flow and viscosity increase was observed proportionally to chitosan content (CS>MPCS). Prepared gels showed better extrusion properties (yield stress) than market formulation Zidoval. Mucoadhesion force studies permitted to point out that: (i) CS decreases mucoadhesion force; (ii) MPCS addition increases the mucoadhesion force at high percentage; (iii) all gels containing chitosan showed better mucoadhesive performances than Zidoval. Gels containing MPCS showed higher and faster drug release than those containing CS. All the preparations were able to release higher drug amounts if compared to market formulation. In conclusion MPCS improved gel characteristics in terms of mucoadhesion force, rheological behaviour and drug release pointing out that this modified chitosan is very suitable to obtain manageable and more acceptable vaginal formulation.     

Mucoadhesive Sustained Drug Delivery System Based on Cationic Polymer and Anionic Cyclodextrin/Triclosan Complex

In this study the interactions between a cationic polymer and an anionic cyclodextrin were investigated. The system has the potential for use in a sustained release dosage forms for use on mucous membranes. As mucous membranes are negatively charged the objective of this study was to investigate whether a drug delivery system based on a cationic polymer and an anionic cyclodextrin would be more mucoadhesive than a system containing a cationic polymer and a neutral cyclodextrin. For this purpose the cationic polymer hexadimethrine bromide (HDMBr) and anionic sulfobutylether -cyclodextrin (SBECD) were utilized as well as the neutral hydroxypropyl-cyclodextrin (HPCD). Triclosan was used as a model drug. The drug delivery system was formulated as a solution or semi-solid and its adhesion to porcine buccal mucosa and cation exchange media was measured. In addition the release of triclosan from the system was quantified. No difference was observed between the two systems when they were applied to the mucosal surface. However, the formulations showed improved adhesion, compared to the neutral cyclodextrin/drug delivery system, when they could also reach the underlying surface of the excised tissue. The drug delivery system was much better retained on the cation exchange media than the uncharged system. Significant interactions were observed between the negatively charged cyclodextrin and the positively charged polymer. The results indicate that the interactions could be used to obtain a mucoadhesive sustained drug delivery system under certain circumstances. The positive charge of HDMBr did not have the expected effect on the buccal mucosa and it can be concluded that although a positive charge is likely to promote mucoadhesion, other attributes of polymers, such as molecular weight and viscosity, may have equally beneficial effect.     

Potential of photodynamic therapy in treatment of fungal infections of the mouth. Design and characterisation of a mucoadhesive patch containing toluidine blue O

Mucocutaneous oropharyngeal candidiasis is predominately caused by Candida albicans. The overall incidence of oral candidiasis in young adults has increased dramatically with the spread of HIV/AIDS. Conventional treatments have been shown to have a fungistatic rather than a fungicidal effect, resulting in an inadequate treatment outcome for patients. In addition, increasing resistance of C. albicans to antifungal agents has made effective treatment more difficult. Accordingly, interest has arisen in development of new prophylaxis/treatment regimens. One such alternative treatment is photodynamic antimicrobial chemotherapy (PACT), in which a combination of a photosensitising drug and visible light cause selective destruction of microbial cells. Due to the highly coloured nature of photosensitisers and the potential for staining of teeth, lips and buccal mucosa, administration of photosensitisers to humans as a liquid mouthwash is undesirable. Targeted delivery of the photosensitiser directly to the site of infection should be the aim. The current study, therefore, reports on a mucoadhesive patch containing toluidine blue O (TBO), as a potential delivery system for use in PACT of oropharyngeal candidiasis. Patches prepared from aqueous blends of poly(methyl vinyl ether/maleic anhydride) and tripropyleneglycol methyl ether possessed suitable properties for use as mucoadhesive drug delivery systems and were capable of resisting dissolution when immersed in artificial saliva. When releasing directly into an aqueous sink, patches containing 50 and 100mg TBO cm(-2) both generated receiver compartment concentrations exceeding the concentration (2.0-5.0 mg ml(-1)) required to produce high levels of kill (>90%) of both planktonic and biofilm-grown C. albicans upon illumination. However, the concentrations of TBO in the receiver compartments separated from patches by membranes intended to mimic biofilm structures were an order of magnitude below those inducing high levels of kill, even after 6h release. Therefore, short application times of TBO-containing mucoadhesive patches should allow treatment of recently-acquired oropharyngeal candidiasis, caused solely by planktonic cells. Longer patch application times may be required for persistent disease where biofilms are implicated.     

Sensitivity of transmission surface plasmon resonance (T-SPR) spectroscopy: self-assembled multilayers on evaporated gold island films

The distance dependence of the localized surface plasmon (SP) extinction of discontinuous gold films is a crucial issue in the application of transmission surface plasmon resonance (T-SPR) spectroscopy to chemical and biological sensing. This derives from the usual sensing configuration, whereby an analyte binds to a selective receptor layer on the gold film at a certain distance from the metal surface. In the present work the distance sensitivity of T-SPR spectroscopy of 1.0-5.0 nm (nominal thickness) gold island films evaporated on silanized glass substrates is studied by using coordination-based self-assembled multilayers, offering thickness tuning in the range from approximately 1 to approximately 15 nm. The morphology, composition and optical properties of the Au/multilayer systems were studied at each step of multilayer construction. High-resolution scanning electron microscopy (HRSEM) showed no apparent change in the underlying Au islands, while atomic force microscopy (AFM) indicated flattening of the surface topography during multilayer construction. A regular growth mode of the organic layers was substantiated by X-ray photoelectron spectroscopy (XPS). Transmission UV-visible spectra showed an increase of the extinction and a red shift of the maximum of the SP band upon addition of organic layers, establishing the distance dependence of the Au SP absorbance. The distance sensitivity of T-SPR spectroscopy can be varied by using characteristic substrate parameters, that is, Au nominal thickness and annealing. In particular, effective sensitivity up to a distance of at least 15 nm is demonstrated with 5 nm annealed Au films. It is shown that intensity measurements, particularly in the plasmon intensity change (PIC) presentation, provide an alternative to the usually measured plasmon band position, offering good accuracy and the possibility of measuring at a single wavelength. The present distance sensitivity results provide the basis for further development of T-SPR transducers based on receptor-coated Au island films.     

新型生物黏附性材料巯基壳聚糖的合成与表征

巯基聚合物利用二硫键的形成, 以共价键黏附于黏膜表面, 可以延长药物在黏膜上的滞留时间, 有利于药物分子的吸收. 本文合成了一种新型巯基聚合物——N-乙酰基-L-半胱氨酸-g-壳聚糖(CS-NAC), 并进行了表征, 同时对材料的溶胀度、黏附性和细胞毒性进行了测试. 结果表明, 这种巯基聚合物具有较高的巯基含量, 最高可达到589.3 μmol/g; 具有快速的溶胀性能; 黏附性显著增强, 黏附时间和黏附力分别是壳聚糖的30和3倍; 无明显的细胞毒性. 因此, CS-NAC是一种很有应用前景的生物黏附性材料.     

Enzyme-octadecylamine Langmuir-Blodgett membranes for ENFET biosensors

Langmuir-Blodgett (LB) films containing butyrylcholinesterase (BuChE) are fabricated to realise an enzymatic field effect transistor (ENFET) for the detection of organophosphorus pesticides in water. Trichlorfon as a common pesticide is examined in our work. The BuChE-immobilised LB films are formed by adsorbing the enzyme molecules onto a stearylamine monolayer using the electrostatic force. Enzyme/stearylamine mixed LB films are immobilized onto a pH-ISFET surface and treated by glutaraldehyde vapour to improve the LB film's stability. The ENFET thus obtained worked as a potentiometric biosensor for trichlorfon detection on the basis of enzyme inhibition. The detection limit for trichlorfon can reach 10(-7) M (26 ppb). The surface characteristics of BuChE/stearylamine LB films obtained under various conditions of the dipping surface pressures are analysed qualitatively by atomic force microscopy (AFM) and analysed quantitatively by FTIR spectroscopy.     

Durable antifog films from layer-by-layer molecularly blended hydrophilic polysaccharides

Mechanically durable, long-lasting antifog coatings based on polysaccharides were developed using a layer-by-layer (LBL) assembly process. The unique properties of these coatings are a result of a molecular-level blending of the polysaccharides, with multilayers containing chitosan and carboxymethyl cellulose providing the best overall properties. The antifog properties resulted from a strong interaction between the polar and H-bonding elements of the assembled polymers and water molecules and the concomitant formation of thin films of water. Environmental scanning electron microscopy (ESEM) studies confirmed that fogging coatings are decorated with light scattering, micrometer-sized droplets of water whereas antifogging coatings remain droplet free. To improve the mechanical durability of the multilayer films on substrates, the surface was modified via self-assembly of epoxy-functionalized silane molecules. Cross-linking chemistry was then applied to improve the mechanical robustness of the LBL films on various surfaces. These films were characterized using several techniques: optical profilometery (PL), spectroscopic ellipsometry (EL), contact angle goniometry (CA), and atomic force microscopy (AFM). The antifog properties of the films were evaluated by several tests under different environmental conditions. This work demonstrates that the unique water-adsorbing properties of polysaccharides can be exploited to create permanent antifog properties, which may be useful for various applications.     

Formation and stability of poly-L-lysine/casein multilayers

The aim of our work was to investigate formation of multilayer films containing biocompatible polycation poly-L-lysine (PLL) and α- or β-casein. Since in the neutral pH casein is negatively charged, it has been used as a polyanionic layer for the film build-up. Casein containing films were formed at surface of Si/SiO₂ wafers and their thickness was measured by ellipsometry. The effect of ionic strength of PLL and casein solutions was investigated. After the multilayer films were formed, they were contacted with solutions having various pH and salts to determine film stability under these conditions. Additionally the response of the thickness of PLL/casein films to the temperature variation in the range of 5–45?°C was also analyzed. Formation and stability of casein containing films was also investigated on surfaces of titanium and stainless steel. We used fluorescently labeled protein to monitor the amount of casein in the film and its change after treatment with solutions containing calcium ions.     

Chemical force microscopy study of adhesive properties of polypropylene films: influence of surface polarity and medium

The adhesive properties of untreated and corona treated polypropylene (PP) films were studied in polar (water) and nonpolar (hexadecane) liquid medium by using chemical force microscopy. A gold-coated colloidal probe was sequentially modified with self-assembled monolayers (SAMs) of omega-functionalized alkanethiols. The same colloidal probe was used for the force measurements, to avoid influence of determination accuracy of the spring constant and sphere radius on the obtained results. The thermodynamic work of adhesion was determined from the measured pull-off force using the Johnson-Kendall-Roberts (JKR) adhesion theory. Rabinovich's model was applied for the consideration of an effect of roughness when calculating the work of adhesion. It was found that the work of adhesion correlates with the hydrophilic properties of the PP surface and SAMs as well as with the polarity of the liquid medium. The observed correlations agree well with those found for the work of adhesion calculated from contact angle measurement.     

Alginate-magnesium aluminum silicate films for buccal delivery of nicotine

Sodium alginate-magnesium aluminum silicate (SA-MAS) dispersions with nicotine (NCT) were prepared at different pHs and characterized for the particle size and zeta potential, NCT adsorbed by MAS, and flow behavior before film casting. The physicochemical properties, NCT content, in vitro bioadhesive property, and NCT release and permeation of the NCT-loaded SA-MAS films were investigated. This study showed that incorporation of NCT into the SA-MAS dispersions caused a change in particle size and flow behavior and that NCT could be adsorbed by MAS. The formation of protonated NCT at acidic and neutral pHs could interact with negatively charged MAS via an electrostatic force, resulting in the formation of NCT-MAS flocculates/complexes that could act as microreservoirs in the films. The NCT-loaded SA-MAS films prepared at pH 5 yielded the highest NCT content due to non-significant loss of NCT during drying. Moreover, pH of the preparation also affected the crystallinity and thermal properties of the films. The NCT release and permeation across the mucosal membrane of the films could be described using a matrix diffusion controlled mechanism. In addition, the NCT-loaded SA-MAS films also possessed a bioadhesive property for adhesion to the mucosal membrane. This finding suggests that the NCT-loaded SA-MAS films composed of numerous NCT-MAS complexes as microreservoirs demonstrated a strong potential for use as a buccal delivery system.     

A polymeric composite carrier for oral delivery of peptide drugs: Bilaminated hydrogel film loaded with nanoparticles

A smart polymeric composite carrier consisting of carboxylated chitosan grafted nanoparticles (CCGN) and bilaminated films with one alginate-Ca²⁺ mucoadhesive layer and one hydrophobic backing layer was developed as a novel carrier for peptide. Calcein, hydrophilic and hydrolytic degradative, was entrapped into CCGN as a model peptide and its release behavior was investigated. Morphology study showed a uniform distribution of CCGN in the homogeneous and porous hydrogel. CCGN was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), particle size measurement, and ζ potential measurement. The composite carrier was characterized by differential scanning calorimetry (DSC), scanning electron microscope (SEM) and fluorescence microscopy. The carrier exhibited high mucoadhesive force and pH-sensitivity, in that release of the nanoparticles and the model peptide calcein were both restricted in acidic environment while a fast and complete release was achieved in neutral medium. Therefore, this novel carrier would be a promising candidate for hydrophilic peptide drugs via oral administration.     

pH-dependent mucoadhesion of a poly(N-isopropylacrylamide) copolymer reveals design rules for drug delivery

This study investigated the mucoadhesive property of a hydrophobically modified copolymer N-isopropylacryamide and glycidylacrylamide NIPAM-N-Gly-(C18)2 (NIPAM-Gly). Prior studies demonstrated that the interfacial properties of this copolymer are pH dependent and that the chains form strong hydrogen bonds at pH < 7 via the carboxylic acid side chains of the glycine moieties. Mucin interactions with the copolymer brushes were investigated by surface plasmon resonance and by direct force measurements. Mucin adsorption was determined as a function of pH, ionic strength, and mucin concentration. It adsorbs to the copolymer strongly at pH 5, but the adsorption decreases with increasing pH. The adsorbed amount is also ionic-strength dependent, decreasing with increasing monovalent salt concentrations at all pH values investigated. When compared with similar investigations with poly(ethylene oxide), these results provide insights into both the chemical characteristics and the solution conditions that determine the mucoadhesive properties of polymers.     

Colloidal interactions between Langmuir-Blodgett bitumen films and fine solid particles

In oil sand processing, accumulation of surface-active compounds at various interfaces imposes a significant impact on bitumen recovery and bitumen froth cleaning (i.e., froth treatment) by altering the interfacial properties and colloidal interactions among various oil sand components. In the present study, bitumen films were prepared at toluene/water interfaces using a Langmuir-Blodgett (LB) upstroke deposition technique. The surface of the prepared LB bitumen films was found to be hydrophobic, comprised of wormlike aggregates containing a relatively high content of oxygen, sulfur, and nitrogen, indicating an accumulation of surface-active compounds in the films. Using an atomic force microscope, colloidal interactions between the LB bitumen films and fine solids (model silica particles and clay particles chosen directly from an oil sand tailing stream) were measured in industrial plant process water and compared with those measured in simple electrolyte solutions of controlled pH and divalent cation concentrations. The results show a stronger long-range repulsive force and weaker adhesion force in solutions of higher pH and lower divalent cation concentration. In plant process water, a moderate long-range repulsive force and weak adhesion were measured despite its high electrolyte content. These findings provide more insight into the mechanisms of bitumen extraction and froth treatment.     

Development of a Controlled Release System for Risperidone Using Polypyrrole: Mechanistic Studies

Polypyrrole (PPY) film has been selected as a platform material for drug delivery due to its inherent conductivity, ease of preparation and apparent biocompatibility. PPY films were prepared containing the antipsychotic drug risperidone as a model compound. Drug release profiles could be altered by applying different electrical stimulation to these films. Atomic force microscopy was used to investigate changes in PPY film thickness when different stimuli were applied. The highest levels of drug release were observed when PPY was reduced; this was accompanied by expansion of the film. Technology such as this could be utilized for implantable drug delivery devices, where the dose could be adjusted by external signaling.     

Grafting of nanoporous alumina membranes and films with organic acids

In this study, direct surface grafting of nanoporous alumina membranes and glass‐supported alumina films was carried out with three different fluorinated organic acids: trifluoroacetic acid, perfluoropentanoic acid and 2,3,4,5,6‐pentafluorobenzoic acid. Elemental surface composition and chemical environment of alumina were investigated using X‐ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). Alumina surfaces grafted with fluoro‐organic acids exhibited increased hydrophobic properties compared to ungrafted surfaces when measured using goniometry and atomic force microscopy (AFM). This work describes the evidence for surface chemical modification of alumina using direct reaction with organic acids. An AFM study of the adsorption of the immunoglobulin G (IgG) molecules on the fluoro‐organic‐acid‐grafted surfaces is reported. The results show that an ordered arrangement of immunoglobulin G structures with in‐filling of pores could be achieved only on the more hydrophobic fluoro‐organic‐acid‐grafted alumina membranes. Copyright © 2007 John Wiley & Sons, Ltd.     

Controlled release from directly compressible theophylline buccal tablets

The aim of the current study was the development of theophylline buccal adhesive tablets using direct compression. Buccal adhesive formulations were developed using a water soluble resin with various combinations of mucoadhesive polymers. The prepared theophylline tablets were evaluated for tensile strength, swelling capacity and ex vivo mucoadhesion performance. Ex vivo mucoadhesion was assessed using porcine gingival tissue and the peak detachment forces were found to be suitable for a buccal adhesive tablet with a maximum of 1.5 N approximately. The effect of formulation composition on the release pattern was also investigated. Most formulations showed theophylline controlled release profiles depended on the grade and polymer ratio. The release mechanisms were found to fit Peppas’ kinetic model over a period of 5 h. In general the majority of the developed formulations presented suitable adhesion and controlled drug release.     

Electro-dry-adhesion

This work presents novel conductive bioinspired dry adhesives with mushroom caps that enable the use of a synergistic combination of electrostatic and van der Waals forces (electro-dry-adhesion). An increase in shear adhesion bond strength of up to 2046% on a wide range of materials is measured when a maximum electrical field of 36.4 V μm(-1) is applied. A suction effect, due to the shape of the dry adhesive fibers, on overall adhesion was not noted for electro-dry-adhesives when testing was performed at both atmospheric and reduced pressure. Utilization of electrostatics to apply a preloading force to dry adhesive fiber arrays allows increased adhesion even after electrostatic force generation has been halted by ensuring the close contact necessary for van der Waals forces to be effective. A comparison is made between self-preloading of the electro-dry-adhesives and the direct application of a normal preloading pressure resulting in nearly the same shear bond strength with an applied voltage of 3.33 kV on the same sample.     

Solid/liquid interfacial tension as a tool to study stability of lysozyme on adsorption to solid surfaces

This work proposes the use of solid/liquid interfacial tension to study the stability of adsorbed lysozyme films on a solid surface using the contact angle of a liquid at the three phase contact line, in the presence of a denaturant, urea.Results suggest a direct correlation between this method with a standard technique like the fluorescence emission spectra and is measured with the same observable error as in the spectral methods. Further the technique provides a simple and direct handle to evaluate the homogeneity and degree of polarity of protein films on solid surfaces.