Metal–metal bonded alkaline-earth distannyls

The first families of alkaline-earth stannylides [Ae(SnPh₃)₂·(thf)_x] (Ae = Ca, x = 3, 1; Sr, x = 3, 2; Ba, x = 4, 3) and [Ae{Sn(SiMe₃)₃}₂·(thf)_x] (Ae = Ca, x = 4, 4; Sr, x = 4, 5; Ba, x = 4, 6), where Ae is a large alkaline earth with direct Ae–Sn bonds, are presented. All complexes have been characterised by high-resolution solution NMR spectroscopy, including ¹¹⁹Sn NMR, and by X-ray diffraction crystallography. The molecular structures of [Ca(SnPh₃)₂·(thf)₄] (1′), [Sr(SnPh₃)₂·(thf)₄] (2′), [Ba(SnPh₃)₂·(thf)₅] (3′), 4, 5 and [Ba{Sn(SiMe₃)₃}₂·(thf)₅] (6′), most of which crystallised as higher thf solvates than their parents 1–6, were established by XRD analysis; the experimentally determined Sn–Ae–Sn′ angles lie in the range 158.10(3)–179.33(4)°. In a given series, the ¹¹⁹Sn NMR chemical shifts are slightly deshielded upon descending group 2 from Ca to Ba, while the silyl-substituted stannyls are much more shielded than the phenyl ones (δ¹¹⁹Sn/ppm: 1′, −133.4; 2′, −123.6; 3′, −95.5; 4, −856.8; 5, −848.2; 6′, −792.7). The bonding and electronic properties of these complexes were also analysed by DFT calculations. The combined spectroscopic, crystallographic and computational analysis of these complexes provide some insight into the main features of these unique families of homoleptic complexes. A comprehensive DFT study (Wiberg bond index, QTAIM and energy decomposition analysis) points at a primarily ionic Ae–Sn bonding, with a small covalent contribution, in these series of complexes; the Sn–Ae–Sn′ angle is associated with a flat energy potential surface around its minimum, consistent with the broad range of values determined by experimental and computational methods.

The complete series of heterobimetallic alkaline-earth distannyls [Ae{SnR₃}₂·(thf)_x] (Ae = Ca, Sr, Ba) have been prepared for R = Ph and SiMe₃, and their bonding and electronic properties have been comprehensively investigated.     

Chiral polymer hosts for circularly polarized electroluminescence devices

Polymer electroluminescence devices producing circularly polarized luminescence (CP PLEDs) have valuable photonic applications. The fabrication of a CP PLED requires a polymer host that provides the appropriate chiral environment around the emitting dopant. However, chemical strategies for the design of chiral polymer hosts remain underdeveloped. We have developed new polymer hosts for CP PLED applications. These polymers were prepared through a free-radical polymerization of 3-vinylcarbazole with a chiral N-alkyl unit. This chiral unit forces the carbazole repeat units to form mutually helical half-sandwich conformers with preferred (P)-helical sense along the polymer main chain. Electronic circular dichroism measurements demonstrate the occurrence of chirality transfer from chiral monomers to achiral monomers during chain growth. The (P)-helical-sense-enriched polymer interacts diastereoselectively with an enantiomeric pair of new phosphorescent (R)- and (S)-dopants. The magnitude of the Kuhn dissymmetry factor (g_abs) for the (P)-helically-enriched polymer film doped with the (R)-dopant was found to be one order of magnitude higher than that of the film doped with the (S)-dopant. Photoluminescence dissymmetry factors (g_PL) of the order of 10⁻³ were recorded for the doped films, but the magnitude of diastereomeric enhancement decreased to that of g_abs. The chiral polymer host permits faster energy transfer to the phosphorescent dopants than the achiral polymer host. Our photophysical and morphological investigations indicate that the acceleration in the chiral polymer host is due to its longer Förster radius and improved compatibility with the dopants. Finally, multilayer CP PLEDs were fabricated and evaluated. Devices based on the chiral polymer host with the (R)- and (S)-dopants exhibit electroluminescence dissymmetry factors (g_EL) of 1.09 × 10⁻⁴ and −1.02 × 10⁻⁴ at a wavelength of 540 nm, respectively. Although challenges remain in the development of polymer hosts for CP PLEDs, our research demonstrates that chiroptical performances can be amplified by using chiral polymer hosts.

Polymer electroluminescence devices producing circularly polarized luminescence (CP PLEDs) have valuable photonic applications.     

Chiral cyanide-bridged 1D Fe~Ⅲ-Mn~Ⅲ heterobimetallic chains: Synthesis, structures and magnetic properties

Two couples of enantiomerically pure chiral cyano-bridged heterobimetallic one-dimensional (1D) chain complexes: [Mn((R,R)-Salphen)Fe(Tp)(CN)3]n (1) and [Mn((S,S)-Salphen)Te(Tp)(CN)3]n (2) (Salphen = N,N’-1,2-diphenylethylenebis (salicylideneiminato) dianion, Tp = tris(pyrazolyl) hydroborate), [Mn((R,R)-Salphen)Fe(Tp*)(CN)3·2H2O]n (3) and [Mn((S,S)-Salphen)Fe(Tp*)(CN)3·2H2O]n (4) (Tp* = hydridotris (3,5-dimethylpyrazol-1-yl) borate), have been successfully synthesized by the reactions of MnIII schiff-base complexes with the tricyanometalate building block, [(LTp)Fe(CN)3]- (LTp = Tp or Tp*). All complexes are made up of neutral cyano-bridged zigzag double chains with (-Fe-C≡N-Mn-N≡C-)n as the repeating unit. Circular dichroism (CD) spectra confirm the enantiomeric nature of the optically active complexes. Magnetic studies demonstrate that ferromagnetic interactions are operative in these complexes. The ferromagnetic couplings become weak in the chains with the bending of the Mn-N≡C angles.     

An organic plastic ferroelectric with high Curie point

Plastic ferroelectrics, featuring large entropy changes in phase transitions, hold great potential application for solid-state refrigeration due to the electrocaloric effect. Although conventional ceramic ferroelectrics (e.g., BaTiO₃ and KNbO₃) have been widely investigated in the fields of electrocaloric material and catalysis, organic plastic ferroelectrics with a high Curie point (T_c) are rarely reported but are of great importance for the sake of environmental protection. Here, we reported an organic plastic ferroelectric, (−)-camphanic acid, which crystallizes in the P2₁ space group, chiral polar 2 (C₂) point group, at room temperature. It undergoes plastic paraelectric-to-ferroelectric phase transition with the Aizu notation of 23F2 and high T_c of 414 K, showing large entropy gain (ΔS_t = 48.2 J K⁻¹ mol⁻¹). More importantly, the rectangular polarization–electric field (P–E) hysteresis loop was recorded on the thin film samples with a large saturated polarization (P_s) of 5.2 μC cm⁻². The plastic phase transition is responsible for its multiaxial ferroelectric feature. This work highlights the discovery of organic multiaxial ferroelectrics driven by the motive of combining chirality and plastic phase transition, which will extensively promote the practical application of such unique functional materials.

An organic plastic ferroelectric, (−)-Camphanic acid, shows multiaxial ferroelectric feature and large entropy gain during the phase transition.     

Helix-mediated over 1 nm-range chirality recognition by ligand-to-ligand interactions of dinuclear helicates

Long-range chirality recognition between the two chiral guest ligands can be tuned based on the helix distances (d_Ln–Ln = 11.5 and 14.0 Å) of bis-diketonate bridged dinuclear lanthanide complexes (2Th and 3Th, respectively) used as mediators. Both 2Th and 3Th form one-dimensional (1D) helical structures upon terminal binding of two chiral guest co-ligands (L^R or L^S). Long-range chiral self-recognition is achieved in self-assembly of 2Th with L^R and L^S to preferentially form homochiral assemblies, 2Th-L^R·L^R and 2Th-L^S·L^S, whereas there is no direct molecular interaction between the two guest ligands at the terminal edges. X-ray crystal structure analysis and density functional theory studies reveal that long-range chiral recognition is achieved by terminal ligand-to-ligand interactions between the bis-diketonate ligands and chiral guest co-ligands. Conversely, in self-assembly of 3Th with a longer helix length, statistical binding of L^R and L^S occurs, forming heterochiral (3Th-L^R·L^S) and homochiral (3Th-L^R·L^R and 3Th-L^S·L^S) assemblies in an almost 1 : 1 ratio. When phenyl side arms of the chiral guest co-ligands are replaced by isopropyl groups (L′^R and L′^S), chiral self-recognition is also achieved in the self-assembly process of 3Th with the longer helix length to generate homochiral (3Th-L′^R·L′^R and 3Th-L′^S·L′^S) assemblies as the favored products. Thus, subtle modification of the chiral guests is capable of achieving over 1.4 nm-range chirality recognition.

Long-range chirality recognition between the two chiral guest ligands can be tuned based on the helix distances (d_Ln–Ln = 11.5 and 14.0 Å) of bis-diketonate bridged dinuclear lanthanide complexes (2Th and 3Th, respectively).     

Versatile Reactivity of MnII Complexes in Reactions with N-Donor Heterocycles: Metamorphosis of Labile Homometallic Pivalates vs. Assembling of Endurable Heterometallic Acetates

Reaction of 2,2′-bipyridine (2,2′-bipy) or 1,10-phenantroline (phen) with [Mn(Piv)₂(EtOH)]_n led to the formation of binuclear complexes [Mn₂(Piv)₄L₂] (L = 2,2′-bipy (1), phen (2); Piv⁻ is the anion of pivalic acid). Oxidation of 1 or 2 by air oxygen resulted in the formation of tetranuclear Mn^II/III complexes [Mn₄O₂(Piv)₆L₂] (L = 2,2′-bipy (3), phen (4)). The hexanuclear complex [Mn₆(OH)₂(Piv)₁₀(pym)₄] (5) was formed in the reaction of [Mn(Piv)₂(EtOH)]_n with pyrimidine (pym), while oxidation of 5 produced the coordination polymer [Mn₆O₂(Piv)₁₀(pym)₂]_n (6). Use of pyrazine (pz) instead of pyrimidine led to the 2D-coordination polymer [Mn₄(OH)(Piv)₇(µ₂-pz)₂]_n (7). Interaction of [Mn(Piv)₂(EtOH)]_n with FeCl₃ resulted in the formation of the hexanuclear complex [Mn^II₄Fe^III₂O₂(Piv)₁₀(MeCN)₂(HPiv)₂] (8). The reactions of [MnFe₂O(OAc)₆(H₂O)₃] with 4,4′-bipyridine (4,4′-bipy) or trans-1,2-(4-pyridyl)ethylene (bpe) led to the formation of 1D-polymers [MnFe₂O(OAc)₆L₂]_n·2nDMF, where L = 4,4′-bipy (9·2DMF), bpe (10·2DMF) and [MnFe₂O(OAc)₆(bpe)(DMF)]_n·3.5nDMF (11·3.5DMF). All complexes were characterized by single-crystal X-ray diffraction. Desolvation of 11·3.5DMF led to a collapse of the porous crystal lattice that was confirmed by PXRD and N₂ sorption measurements, while alcohol adsorption led to porous structure restoration. Weak antiferromagnetic exchange was found in the case of binuclear Mn^II complexes (J_Mn-Mn = −1.03 cm⁻¹ for 1 and 2). According to magnetic data analysis (J_Mn-Mn = −(2.69 ÷ 0.42) cm⁻¹) and DFT calculations (J_Mn-Mn = −(6.9 ÷ 0.9) cm⁻¹) weak antiferromagnetic coupling between Mn^II ions also occurred in the tetranuclear {Mn₄(OH)(Piv)₇} unit of the 2D polymer 7. In contrast, strong antiferromagnetic coupling was found in oxo-bridged trinuclear fragment {MnFe₂O(OAc)₆} in 11·3.5DMF (J_Fe-Fe = −57.8 cm⁻¹, J_Fe-Mn = −20.12 cm⁻¹).     

Structure,Luminescent Sensing and Proton Conduction of a Boiling-Water-Stable Zn(II) Metal-Organic Framework

A novel Zn(II) metal-organic framework [Zn₄O(C₃₀H₁₂F₄O₄S₈)₃]_n, namely ZnBPD-4F4TS, has been constructed from a fluoro- and thiophenethio-functionalized ligand 2,2′,5,5′-tetrafluoro-3,3′,6,6′-tetrakis(2-thiophenethio)-4,4′-biphenyl dicarboxylic acid (H₂BPD-4F4TS). ZnBPD-4F4TS shows a broad green emission around 520 nm in solid state luminescence, with a Commission International De L’Eclairage (CIE) coordinate at x = 0.264, y = 0.403. Since d¹⁰-configured Zn(II) is electrochemically inert, its photoluminescence is likely ascribed to ligand-based luminescence which originates from the well-conjugated system of phenyl and thiophenethio moieties. Its luminescent intensities diminish to different extents when exposed to various metal ions, indicating its potential as an optical sensor for detecting metal ion species. Furthermore, ZnBPD-4F4TS and its NH₄Br-loaded composite, NH₄Br@ZnBPD-4F4TS, were used for proton conduction measurements in different relative humidity (RH) levels and temperatures. Original ZnBPD-4F4TS shows a low proton conductivity of 9.47 × 10⁻¹⁰ S cm⁻¹ while NH₄Br@ZnBPD-4F4TS shows a more than 25,000-fold enhanced value of 2.38 × 10⁻⁵ S cm⁻¹ at 40 °C and 90% RH. Both of the proton transport processes in ZnBPD-4F4TS and NH₄Br@ZnBPD-4F4TS belong to the Grotthuss mechanism with E_a = 0.40 and 0.32 eV, respectively.     

Realizing high hydrogen evolution activity under visible light using narrow band gap organic photocatalysts

The design and synthesis of conjugated semiconducting polymers for photocatalytic hydrogen evolution have engendered intense recent interest. However, most reported organic polymer photocatalysts show a relatively broad band gap with weak light absorption ability in the visible light region, which commonly leads to a low photocatalytic activity under visible light. Herein, we synthesize three novel dithieno[3,2-b:2′,3′-d]thiophene-S,S-dioxide (DTDO) containing conjugated polymer photocatalysts by a facile C–H arylation coupling polymerization reaction. The resulting polymers show a broad visible light absorption range up to 700 nm and a narrow band gap down to 1.81 eV due to the introduction of the DTDO unit. Benefiting from the donor–acceptor polymer structure and the high content of the DTDO unit, the three-dimensional polymer PyDTDO-3 without the addition of a Pt co-catalyst shows an attractive photocatalytic hydrogen evolution rate of 16.32 mmol h⁻¹ g⁻¹ under visible light irradiation, which is much higher than that of most reported organic polymer photocatalysts under visible light.

Narrow band gap conjugated polymer photocatalysts containing dithieno[3,2-b:2′,3′-d]thiophene-S,S-dioxide show an attractive photocatalytic hydrogen evolution rate of 16.32 mmol h⁻¹ g⁻¹ under visible light irradiation.     

Reactivity of cyano- and isothiocyanatoborylenes: metal coordination,one-electron oxidation and boron-centred Brønsted basicity

Doubly base-stabilised cyano- and isothiocyanatoborylenes of the form LL′BY (L = CAAC = cyclic alkyl(amino)carbene; L′ = NHC = N-heterocyclic carbene; Y = CN, NCS) coordinate to group 6 carbonyl complexes via the terminal donor of the pseudohalide substituent and undergo facile and fully reversible one-electron oxidation to the corresponding boryl radical cations [LL′BY]˙⁺. Furthermore, calculations show that the borylenes have very similar proton affinities, both to each other and to NHC superbases. However, while the protonation of LL′B(CN) with PhSH yielding [LL′BH(CN)⁺][PhS⁻] is fully reversible, that of LL′B(NCS) is rendered irreversible by a subsequent B-to-C_CAAC hydrogen shift and nucleophilic attack of PhS⁻ at boron.

Borylenes of the form (CAAC)(NHC)BY (Y = CN, NCS; CAAC = cyclic alkyl(amino)carbene; NHC = N-heterocyclic carbene) coordinate to group 6 carbonyl complexes via Y, and show reversible boron-centered Brønsted basicity and one-electron oxidation.     

3D Metal–Organic Frameworks Based on Co(II) and Bithiophendicarboxylate: Synthesis,Crystal Structures,Gas Adsorption,and Magnetic Properties

Three new 3D metal-organic porous frameworks based on Co(II) and 2,2′-bithiophen-5,5′-dicarboxylate (btdc²⁻) [Co₃(btdc)₃(bpy)₂]·4DMF, 1; [Co₃(btdc)₃(pz)(dmf)₂]·4DMF·1.5H₂O, 2; [Co₃(btdc)₃(dmf)₄]∙2DMF∙2H₂O, 3 (bpy = 2,2′-bipyridyl, pz = pyrazine, dmf = N,N-dimethylformamide) were synthesized and structurally characterized. All compounds share the same trinuclear carboxylate building units {Co₃(RCOO)₆}, connected either by btdc^2– ligands (1, 3) or by both btdc^2– and pz bridging ligands (2). The permanent porosity of 1 was confirmed by N₂, O₂, CO, CO₂, CH₄ adsorption measurements at various temperatures (77 K, 273 K, 298 K), resulted in BET surface area 667 m²⋅g⁻¹ and promising gas separation performance with selectivity factors up to 35.7 for CO₂/N₂, 45.4 for CO₂/O₂, 20.8 for CO₂/CO, and 4.8 for CO₂/CH₄. The molar magnetic susceptibilities χ_p(T) were measured for 1 and 2 in the temperature range 1.77–330 K at magnetic fields up to 10 kOe. The room-temperature values of the effective magnetic moments for compounds 1 and 2 are μ_eff (300 K) ≈ 4.93 μ_B. The obtained results confirm the mainly paramagnetic nature of both compounds with some antiferromagnetic interactions at low-temperatures T < 20 K in 2 between the Co(II) cations separated by short pz linkers. Similar conclusions were also derived from the field-depending magnetization data of 1 and 2.     

Magnetic and Luminescence Properties of 8-Coordinate Holmium(III) Complexes Containing 4,4,4-Trifluoro-1-Phenyl- and 1-(Naphthalen-2-yl)-1,3-Butanedionates

A new series of mononuclear Ho³⁺ complexes derived from the β-diketonate anions: 4,4,4-trifluoro-1-phenyl-1,3-butanedioneate (btfa⁻) and 4,4,4-trifuoro-1-(naphthalen-2-yl)-1,3-butanedionate (ntfa⁻) have been synthesized, [Ho(btfa)₃(H₂O)₂] (1a), [Ho(ntfa)₃(MeOH)₂] (1b), (1), [Ho(btfa)₃(phen)] (2), [Ho(btfa)₃(bipy)] (3), [Ho(btfa)₃(di-^tbubipy)] (4), [Ho(ntfa)₃(Me₂bipy)] (5), and [Ho(ntfa)₃(bipy)] (6), where phen is 1,10-phenantroline, bipy is 2,2′-bipyridyl, di-^tbubipy is 4,4′-di-tert-butyl-2,2′-bipyridyl, and Me₂bipy is 4,4′-dimethyl-2,2′-bipyridyl. These compounds have been characterized by elemental microanalysis and infrared spectroscopy as well as single-crystal X-ray difraction for 2–6. The central Ho³⁺ ions in these compounds display coordination number 8. The luminescence-emission properties of the pyridyl adducts 2–6 display a strong characteristic band in the visible region at 661 nm and a series of bands in the NIR region (excitation wavelengths (λ_ex) of 367 nm for 2–4 and 380 nm for 5 and 6). The magnetic properties of the complexes revealed magnetically uncoupled Ho³⁺ compounds with no field-induced, single-molecule magnet (SMMs).     

Ion polarisation-assisted hydrogen-bonded ferroelectrics in liquid crystalline domains

An alkylamide-substituted (−NHCOC₁₀H₂₁) hydrogen-bonded dibenzo[18]crown-6 derivative (1) was prepared to stabilise the ionic channel structure in a discotic hexagonal columnar (Col_h) liquid crystal. The introduction of simple M⁺X⁻ salts such as Na⁺PF₆⁻ and K⁺I⁻ into the ionic channel of 1 enhanced the ionic conductivity of the Col_h phase of the M⁺·(1)·X⁻ salts, with the highest ionic conductivity reaching ∼10⁻⁶ S cm⁻¹ for K⁺·(1)·I⁻ and Na⁺·(1)·PF₆⁻ at 460 K, which was approximately 5 orders of magnitude higher than that of 1. The introduction of non-ferroelectric 1 into the ferroelectric N,N′,N′′-tri(tetradecyl)-1,3,5-benzenetricarboxamide (3BC) elicited a ferroelectric response from the mixed Col_h phase of (3BC)_x(1)_1−x with x = 0.9 and 0.8. The further doping of M⁺X⁻ into the ferroelectric Col_h phase of (3BC)_0.9(1)_0.1 enhanced the ferroelectric polarisation assisted by ion displacement in the half-filled ionic channel for the vacant dibenzo[18]crown-6 of (3BC)_0.9[(M⁺)_0.5·(1)·(X⁻)_0.5]_0.1.

An alkylamide-substituted (−NHCOC₁₀H₂₁) hydrogen-bonded dibenzo[18]crown-6 derivative (1) was prepared to stabilise the ionic channel structure in a discotic hexagonal columnar (Col_h) liquid crystal.     

A free boratriptycene-type Lewis superacid

Bicyclic pyrazabole-bridged ferrocenes with BH groups at their bridgehead positions were prepared from [Li(thf)]₂[1,1′-fc(BH₃)₂] and pyrazole or 3,5-dimethylpyrazole in the presence of Me₃SiCl (1 or 1Me, respectively; 1,1′-fc = 1,1′-ferrocenylene); Me₃SiH and H₂ are released as byproducts. Treatment of 1 or 1Me with 1 eq. of the hydride scavenger [Ph₃C][B(C₆F₅)₄] afforded the borenium salts [2][B(C₆F₅)₄] (72%) and [2Me][B(C₆F₅)₄] (77%). According to X-ray crystallography, [2Me]⁺ contains one trigonal-planar borenium cation, the cyclopentadienyl (Cp) rings of the 1,1′-fc fragment remain parallel to each other, but the Cp–B bond vector is bent out of the Cp plane by an unprecedentedly large dip angle α* of 40.6°. The Fe⋯B(sp²) distance is very short (2.365(4) Å) and the ¹¹B NMR signal of the cationic B(sp²) center is remarkably upfield shifted (23.4 ppm), suggesting a direct Fe(3d) → B(2p) donor–acceptor interaction. Although this interpretation is confirmed by quantum-chemical calculations, the coupling between the associated orbitals corresponds to an energy of only 12 kJ mol⁻¹. Accordingly, both the experimental (e.g., Gutmann–Beckett acceptor number AN = 111) and theoretical assessment (e.g., Et₃PO and F⁻-ion affinities) of the Lewis acidity proves that [2]⁺ is among the strongest boron-based Lewis acids available to date.

An exceptionally strong ferrocene-containing, cationic boratriptycene-type Lewis acid is stabilized by a weak Fe⋯B through-space interaction.     

Critical Reappraisal of Methods for Measuring Urine Saturation with Calcium Salts

Background: Metabolic and physicochemical evaluation is recommended to manage the condition of patients with nephrolithiasis. The estimation of the saturation state (β values) is often included in the diagnostic work-up, and it is preferably performed through calculations. The free concentrations of constituent ions are estimated by considering the main ionic soluble complexes. It is contended that this approach is liable to an overestimation of β values because some complexes may be overlooked. A recent report found that β values could be significantly lowered upon the addition of new and so far neglected complexes, [Ca(PO₄)Cit]⁴⁻ and [Ca₂H₂(PO₄)₂]. The aim of this work was to assess whether these complexes can be relevant to explaining the chemistry of urine. Methods: The Ca–phosphate–citrate aqueous system was investigated by potentiometric titrations. The stability constants of the parent binary complexes [Cacit]⁻ and [CaPO₄]⁻, and the coordination tendency of PO₄³⁻ toward [Ca(cit)]⁻ to form the ternary complex, were estimated. β_CaOx and β_CaHPO4 were then calculated on 5 natural urines by chemical models, including or not including the [CaPO₄]⁻ and [Ca(PO₄)cit]⁴⁻ species. Results: Species distribution diagrams show that the [Ca(PO₄)cit]⁴⁻ species was only noticeable at pH > 8.5 and below 10% of the total calcium. β values estimated on natural urine were slightly lowered by the formation of [CaPO₄]⁻ species, whereas [Ca(PO₄)cit]⁴⁻ results were irrelevant. Conclusions: While [CaPO₄]⁻ species have an impact on saturation levels at higher pHs, the existence of ternary complex and of the dimer is rejected.     

A redox-mediator pathway for enhanced multi-colour electrochemiluminescence in aqueous solution

The classic and most widely used co-reactant electrochemiluminescence (ECL) reaction of tris(2,2′-bipyridine)ruthenium(ii) ([Ru(bpy)₃]²⁺) and tri-n-propylamine is enhanced by an order of magnitude by fac-[Ir(sppy)₃]³⁻ (where sppy = 5′-sulfo-2-phenylpyridinato-C²,N), through a novel ‘redox mediator’ pathway. Moreover, the concomitant green emission of [Ir(sppy)₃]³⁻* enables internal standardisation of the co-reactant ECL of [Ru(bpy)₃]²⁺. This can be applied using a digital camera as the photodetector by exploiting the ratio of R and B values of the RGB colour data, providing superior sensitivity and precision for the development of low-cost, portable ECL-based analytical devices.

A water-soluble Ir(iii) complex is shown to enhance the ‘remote’ mechanism of the most widely used co-reactant ECL reaction of tris(2,2′-bipyridine)ruthenium(ii) with tripropylamine.     

Transfer of polyantimony units

Transfer reagents are useful tools in chemistry to access metastable compounds. The reaction of [Cp′′₂ZrCl₂] with KSb(SiMe₃)₂ leads to the formation of the novel polyantimony triple decker complex [(Cp′′Zr)₂(μ,η^1:1:1:1:1:1-Sb₆)] (1, Cp′′ = 1,3-di-tertbutyl-cyclopentadienyl), containing a chair-like Sb₆⁶⁻ ligand. Compound 1 represents a valuable transfer reagent to form novel antimony ligand complexes. Thus, the reaction of 1 with Cp^R-substituted transition metal halides of nickel, cobalt and iron leads to the formation of a variety of novel Sb_n ligand complexes, such as the cubane-like compounds [(Cp′′′Ni)₄(μ₃-Sb)₄] (2) and [(Cp′′′Co)₄(μ₃-Sb₄)] (3a) or the complexes [(Cp^BnCo)₃(μ₃-Sb)₂] (4) and [(Cp′′′Fe)₃(μ₃-Sb)₂] (5), representing a trigonal bipyramidal structure. Moreover, beside the transfer of Sb₁ units, also the complete entity can be transferred as seen in the iron complex [(Cp′′′Fe)₃(μ_3,η^4:4:4-Sb₆)] (6). DFT calculations shed light on the bonding situation of the products.

The synthesis and characterization of the unique polyantimony complex [(Cp′′Zr)₂(μ,η^1:1:1:1:1:1-Sb₆)] (1) is described. Compound 1 was used as antimony source to transfer Sb_n units to late transition metal fragments [Cp^RM] (M = Fe, Co, Ni).     

4-Amino-1-oxyl-2,2,6,6-tetramethylpiperidine-3-carboxylic acid (β-TOAC), the first spin-labelled, cyclic, chiral β-amino acid resolved in an enantiomerically pure state

Amination of 3-carboxymethyl-1-oxyl-2,2,6,6-tetramethyl-4-piperidone with (R)-α-methylbenzylamine, NaBH₃CN reduction of the resulting enamine and removal of the chiral auxiliary from the separated diastereoisomers, led to enantiomerically pure (3S,4S) and (3R,4R) methyl 4-amino-1-oxyl-2,2,6,6-tetramethylpiperidine-3-carboxylates.     

Highest-Tc single-component homochiral organic ferroelectrics

Organic single-component ferroelectrics with low molecular mass have drawn great attention for application in organic electronics. However, the discovery of high-T_c single-component organic ferroelectrics has been very scarce. Herein, we report a pair of homochiral single-component organic ferroelectrics (R)-10-camphorsulfonylimine and (S)-10-camphorsulfonylimine under the guidance of ferroelectric chiral chemistry. They crystallize in the chiral–polar space group P2₁, and their mirror image relations have been identified using vibrational circular dichroism spectra. They both exhibit 422F2 multiaxial ferroelectricity with T_c as high as 429 K. Besides, they possess superior acoustic impedance characteristics with a value of 2.45 × 10⁶ kg s⁻¹ m⁻², lower than that of PVDF. To our knowledge, enantiomeric (R and S)-10-camphorsulfonylimine show the highest T_c among the known organic single-component ferroelectrics and low acoustic impedance well matching with that of bodily tissues. This work promotes the development of high-performance organic single-component ferroelectrics and is of great inspiration to explore their application in next-generation flexible smart devices.

A pair of enantiomeric organic ferroelectrics (R and S)-10-camphorsulfonylimine show the highest T_c among the known single-component organic ferroelectrics.     

Ga+-catalyzed hydrosilylation? About the surprising system Ga+/HSiR3/olefin,proof of oxidation with subvalent Ga+ and silylium catalysis with perfluoroalkoxyaluminate anions

Already 1 mol% of subvalent [Ga(PhF)₂]⁺[pf]⁻ ([pf]⁻ = [Al(OR^F)₄]⁻, R^F = C(CF₃)₃) initiates the hydrosilylation of olefinic double bonds under mild conditions. Reactions with HSiMe₃ and HSiEt₃ as substrates efficiently yield anti-Markovnikov and anti-addition products, while bulkier substrates such as HSiⁱPr₃ are less reactive. Investigating the underlying mechanism by gas chromatography and STEM analysis, we unexpectedly found that H₂ and metallic Ga⁰ formed. Without the addition of olefins, the formation of R₃Si–F–Al(OR^F)₃ (R = alkyl), a typical degradation product of the [pf]⁻ anion in the presence of a small silylium ion, was observed. Electrochemical analysis revealed a surprisingly high oxidation potential of univalent [Ga(PhF)₂]⁺[pf]⁻ in weakly coordinating, but polar ortho-difluorobenzene of E_1/2(Ga⁺/Ga⁰; oDFB) = +0.26–0.37 V vs. Fc⁺/Fc (depending on the scan rate). Apparently, subvalent Ga⁺, mainly known as a reductant, initially oxidizes the silane and generates a highly electrophilic, silane-supported, silylium ion representing the actual catalyst. Consequently, the [Ga(PhF)₂]⁺[pf]⁻/HSiEt₃ system also hydrodefluorinates C(sp³)–F bonds in 1-fluoroadamantane, 1-fluorobutane and PhCF₃ at room temperature. In addition, both catalytic reactions may be initiated using only 0.2 mol% of [Ph₃C]⁺[pf]⁻ as a silylium ion-generating initiator. These results indicate that silylium ion catalysis is possible with the straightforward accessible weakly coordinating [pf]⁻ anion. Apparently, the kinetics of hydrosilylation and hydrodefluorination are faster than that of anion degradation under ambient conditions. These findings open up new windows for main group catalysis.

Nobler than expected: subvalent [Ga(PhF)₂][pf] ([pf]⁻ = [Al{OC(CF₃)₃}₄]⁻) oxidizes hydrosilanes to silylium ions, allowing for catalytic hydrosilylation and hydrodefluorination and suggesting that silylium catalysis is possible with the [pf]− anion.     

Optically active, bulky tris(oxazolinyl)borato magnesium and calcium compounds for asymmetric hydroamination/cyclization

The synthesis of the new chiral, pseudo C₃-symmetric, monoanionic ligand tris(4S-tert-butyl-2-oxazolinyl)phenylborate [To^T]⁻ is reported. The steric bulk, tridentate coordination, and anionic charge of [To^T]⁻ are suitable for formation of complexes of the type To^TMX, where one valence is available for reactivity. With this point in mind, we prepared magnesium and calcium To^T complexes that resist redistribution to (To^T)₂M compounds. Both To^TMgMe and To^TCaC(SiHMe₂)₃ contain tridentate To^T-coordination to the metal center, as shown by NMR spectroscopy, infrared spectroscopy, and X-ray crystallography. These compounds are active catalysts for the cyclization of three aminoalkenes to pyrrolidines, and provide non-racemic mixtures of pyrrolidines in enantiomeric excesses up to 36%.