Gallium tribromide catalyzed coupling reaction of alkenyl ethers with ketene silyl acetals

A 'Ga'llant couple: The α-alkenylation of esters was accomplished by GaBr(3) -catalyzed coupling between alkenyl ethers and ketene silyl acetals. In this reaction system, various alkenyl ethers, including those with vinyl and substituted alkenyl groups, were applicable, and the scope of applicable ketene silyl acetals was sufficiently broad. The mechanism is also discussed.     

Chiral Zinc(II)‐Catalyzed Enantioselective Tandem α‐Alkenyl Addition/Proton Shift Reaction of Silyl Enol Ethers with Ketimines

A new catalytic asymmetric tandem α‐alkenyl addition/proton shift reaction of silyl enol ethers with ketimines was serendipitously discovered in the presence of chiral N,N′‐dioxide/Zn^II complexes. The proton shift preferentially proceeded instead of a silyl shift after α‐alkenyl addition of silyl enol ether to the ketimine. A wide range of β‐amino silyl enol ethers were synthesized in high yields with good to excellent ee values. Control experiments suggest that the Mukaiyama–Mannich reaction and tandem α‐alkenyl addition/proton shift reaction are competitive reactions in the current catalytic system. The obtained β‐amino silyl enol ethers were easily transformed into β‐fluoroamines containing two vicinal tetrasubstituted carbon centers.     

Versatile diastereoselectivity in formal [3,3]-sigmatropic shifts of substituted 1-alkenyl-3-alkylidenecyclobutanols and their silyl ethers

A new method for the preparation of highly substituted cyclohexenones is reported. [2 + 2] Cycloaddition of 2-silyloxydienes with allenecarboxylate affords the 1-alkenyl-3-alkylidenecyclobutanol silyl ethers. Thermolysis of these compounds affords the methylene cyclohexenyl silyl ethers with excellent exo selectivity (>95:5) when monosubstituted alkenyl groups are used, while the use of disubstituted alkenyl groups gives generally low selectivity ( approximately 2:1). However, rearrangement of the anion of the cyclobutanol (prepared by acidic hydrolysis of the TMS silyl ether) at low temperature gives the endo product with good to excellent diastereoselectivity (5-23:1). Two different mechanistic rationales are given for the two different processes: the first via a diradical and the second via a cleavage intramolecular Michael addition. Thus, the same starting material (e.g., 20) can be converted into either the exo or endo product, 22x or 22n, with good diastereocontrol by just changing the rearrangement conditions.     

Intramolecular anti-hydrosilylation and silicon-assisted cross-coupling: highly regio- and stereoselective synthesis of trisubstituted homoallylic alcohols

A highly regio- and stereoselective anti-intramolecular hydrosilylation of alkynyl silyl ethers catalyzed by a ruthenium arene complex has been developed. The resultant (Z)-alkylidenesilacyclopentanes are efficiently coupled with aryl or alkenyl halides in the presence of tetrabutylammonium fluoride and a palladium(0) catalyst. The yields are generally good, and the reaction is compatible with a wide range of functional groups. The overall transformation achieves the stereoselective conversion of homopropargyl alcohols to trisubstituted homoallylic alcohols. [reaction: see text]     

A silver-catalyzed spirocyclization of alkynyl silyl enol ethers

Ring out the old: The cycloisomerization of alkynyl silyl enol ethers proceeds at ambient temperature under the mild conditions of silver catalysis. Mono- or bicyclic spiro compounds can be obtained by 5-exo-dig reactions. Trapping the vinyl silver species with an iodide source, such as N-iodosuccinimide (NIS), afforded the alkenyl iodide derivatives.     

A novel synthesis of silyl enol ethers from α-silylbenzylthiols and carboxylic acid derivatives via C---C bond formation; thermal rearrangement of S-α-silylbenzyl thioesters

A new procedure for the synthesis of silyl enol ethers from S-α-silylbenzyl thioesters without need for either bases or catalysts via C---C bond formation is described. Solutions of S-α-silylbenzyl thioesters were simply heated at 180°C for 24 h in a sealed tube to give silyl enol ethers in good yields with high stereoselectivity. Cyclization of the dipoles generated by thermal rearrangement of the silyl group and elimination of sulfur afforded silyl enol ethers.     

Sulfur dioxide-mediated syntheses of polyfunctional alkenes and (E,Z)- and (E,E)-2,4-dien-1-ones

Efficient methods for the stereoselective synthesis of polyfunctional (E)- and (Z)-alkenes and conjugated (E,E)- and (E,Z)-dienones are presented. They rely upon one-pot, four-component processes that condense 1-oxy-1,3-dienes, silyl enol ethers, SO2, and carbon electrophiles. [structure: see text]     

Synthesis of dibenzo[b,d]pyran-6-ones based on [3 + 3] cyclizations of 1,3-bis(silyl enol ethers) with 3-silyloxy-2-en-1-ones

Functionalized dibenzo[b,d]pyran-6-ones were prepared by formal [3 + 3] cyclization of 1,3-bis(silyl enol ethers) with 3-silyloxy-2-en-1-ones or 1,1-diacetylcyclopropane to give functionalized salicylates, Suzuki cross-coupling reactions of the corresponding triflates, and subsequent BBr3-mediated lactonization. A second approach to dibenzo[b,d]pyran-6-ones relies on the [3 + 3] cyclization of 1,3-bis(silyl enol ethers) with 1-(2-methoxyphenyl)-1-(trimethylsilyloxy)alk-1-en-3-ones and subsequent BBr3-mediated lactonization.     

A new selective approach to 1,1-bis(silyl)-2-arylethenes and 1,1-bis(silyl)-1,3-butadienes via sequential silylative coupling-Heck coupling reactions

A novel selective route to 1,1-bis(silyl)-1-alkenes has been developed. Sequential one-pot silylative coupling exo-cyclization of 1,2-bis(dimethylvinylsiloxy)ethane followed by the reaction with Grignard reagents leads to the desired 1,1-bis(silyl)ethenes, which are then efficiently coupled in the presence of silver nitrate and palladium acetate with aryl or alkenyl idodides to give the corresponding 1,1-bis(silyl)-2-arylethenes or 1,1,4-trisubstituted 1,3-butadienes with high yield.     

Synthesis of cyclic alkenyl ethers via intramolecular cyclization of O-alkynylbenzaldehydes. Importance of combination between CuI catalyst and DMF

An efficient and remarkably general method for the synthesis of cyclic alkenyl ethers via the Cu(I)-catalyzed intramolecular cyclization of O-alkynylbenzaldehydes has been developed. The survey of metal catalysts and solvents revealed that the combination of copper(I) iodide and DMF was the catalytic system of choice. The reaction most probably proceeds via the nucleophilic addition of alcohols 2 to O-alkynylbenzaldehydes 1 to generate the corresponding hemiacetals, and subsequent nucleophilic attack of the hemiacetal oxygen to the copper coordinated alkyne would give the annulation products 3. In all cases, the reaction proceeded in a regiospecific manner leading to the six-membered endocyclic products via 6-endo-dig cyclization.     

Acid-catalyzed reaction behavior of 1-silylcyclopropylmethanols

Treatment of 1-silylcyclopropylmethanols with TsOH in methanol gives different homoallyl ethers depending upon the configuration of substituents on cyclopropane ring and the kinds of substituents on carbinyl carbon. Especially, the reaction of cyclopropylmethanols having no substituents on the same side with silyl group on cyclopropane ring proceeds to give the corresponding E-homoallyl ethers with high stereoselectivity. The following protiodesilylation of resulting homoallyl ethers proceeds with retention of configuration.     

Vinyl ketones to allenes: preparation of 1,3-dien-2-yl triflates and their application in Pd-catalyzed reactions with soft nucleophiles

[chemical reaction: see text]. A general route of converting alkenyl ketones to functionalized allenes was developed. Substituted 1,3-dien-2-yl triflates, which were prepared from the alkenyl ketones via silyl dienol ethers, were excellent substrates for the palladium-catalyzed reaction with soft nucleophiles giving the multisubstituted allenes in high yields. Comparison between the dienyl triflates and analogous bromodienes in the Pd-catalyzed reaction was studied as well.     

Cyclooctanone synthesis via a formal [6+2] cycloaddition reaction of a dicobalt acetylene complex

An efficient formal [6+2] cycloaddition reaction of a new six-carbon unit with enol silyl ether was developed on the basis of a dicobalt hexacarbonyl propargyl cation species. Under the influence of EtAlCl₂, 6-benzoyloxy-2-(triisopropylsilyloxy)-1-hexen-4-yne-dicobalthexacarbonyl reacted with enol triisopropylsilyl ethers to yield 7-(triisopropylsilyloxy)-3-cyclooctyn-1-one-dicobalthexacarbonyl derivatives in good yield. The reactions with cyclic enol silyl ethers as well as acyclic enol silyl ethers exhibited remarkably high diastereoselectivity.     

Alkenyl copper reagents—26 : Carbocupration of alkynes by organocopper reagents bearing a protected hydroxy or thiol function

Halohydrins, protected as ethers, acetals or chloro-magnesium alcoholates are sequentially transformed into the Li or Mg reagents and then into copper or cuprate derivatives. Addition to acetylene or propyne is discussed according to various parameters. The alkenyl copper or cuprate species, thus obtained, may react further with various electrophiles, leading to difunctionalized alkenes.     

Tandem intramolecular silylformylation and silicon-assisted cross-coupling reactions. synthesis of geometrically defined alpha,beta-unsaturated aldehydes

The palladium- and copper-catalyzed cross-coupling reactions of cyclic silyl ethers with aryl iodides are reported. Silyl ethers 3 were readily prepared by intramolecular silylformylation of homopropargyl silyl ethers 2 under a carbon monoxide atmosphere. The reaction of cyclic silyl ethers 3with various aryl iodides 7 in the presence of [(allyl)PdCl](2), CuI, a hydrosilane, and KF.2H(2)O in DMF at room temperature provided the alpha,beta-unsaturated aldehyde coupling products 8 in high yields. The need for copper in this process suggested that transmetalation from silicon to copper is an important step in the mechanism. Although siloxane 3 and the product 8 are not stable under basic conditions, KF.2H(2)O provided the appropriate balance of reactivity toward silicon and reduced basicity. The addition of a hydrosilane to [(allyl)PdCl](2) was needed to reduce the palladium(II) to the active palladium(0) form.     

Catalytic asymmetric hydrosilylation of ketones: I. Chiral phosphine-platinum(II) complex-catalyzed hydrosilylation.

Dichlorobis(dimethylphenylphosphine)di-μ-chlorodiplatinum(II) was found to be an effective catalyst for the hydrosilylation of alkyl phenyl ketones with methyldichlorosilane to give the corresponding silyl ethers of 1-phenylalkanols. In the case of dialkyl ketones, the reaction was accompanied by formation of silyl enol ethers in considerable amounts. Asymmetric hydrosilylation of a series of alkyl phenyl ketones catalyzed by chiral phosphine- platinum(II) complexes was undertaken. The products were readily converted into partially active 1-phenylalkanols.     

Synthesis of 1-hydrocarbon substituted cyclopropyl silyl ketones

The synthesis of cyclopropyl silyl ketones possessing a hydrocarbon group at 1-position of three-membered ring was investigated. The reaction of sulfoxonium ylide with α,β-unsaturated acylsilanes derived from α,β-unsaturated aldehydes did not afford the desired acylsilane derivatives. Instead, the corresponding silyl enol ethers were yielded exclusively. On the other hand, the Corey-Chaykovsky cyclopropanation of α-substituted α,β-unsaturated aldehydes proceeded well to give 1-substituted cyclopropyl aldehydes. The silyl substitution of formyl proton in the obtained aldehydes via umpolung of carbonyl group afforded the target acylsilanes.     

A radical cyclization between enol silyl ethers and aryl or alkenyl bromide moieties

Enol silyl ethers bearing aryl or alkenyl bromide moieties at their appropriate positions undergo radical cyclization in the presence of Bu₃SnH and AIBN to yield the corresponding 5- and 6-membered cycloalkanols in good yields.     

铜催化CO2和1-苯基丙炔的氢羧基化反应机理及区域选择性

采用密度泛函理论(DFT)方法研究了在还原剂(EtO)₃SiH存在下, 铜(I) (Cl₂IPrCuF)催化CO₂插入1-苯基丙炔生成α,β不饱和羧酸的反应机理. 计算结果表明, Cl₂IPrCuF 首先与(EtO)₃SiH 生成活性催化剂Cl₂IPrCuH,然后经历三个步骤完成催化反应: (1) Cl₂IPrCuH 与1-苯基丙炔加成生成烯基铜中间体. 由于炔烃的不对称性,烯基铜中间体有两种同分异构体, 最后可导致生成两种对应的α,β不饱和羧酸衍生物; (2) CO₂插入烯基铜中间体得到羧基铜中间体; (3) (EtO)₃SiH 与羧基铜中间体发生σ转位反应形成最终产物, 同时重新生成催化剂Cl₂IPrCuH. 理论研究还表明, 生成两种α,β不饱和羧酸衍生物的反应路径所对应的决速步骤不同, 在Path a 中炔烃插入反应和CO₂插入反应都可能是整个催化反应的决速步骤, 自由能垒分别为68.6 和67.8 kJ·mol^-1, 而在Path b中, 仅炔烃插入反应是整个催化反应的决速步骤, 自由能垒为78.7 kJ·mol^-1. 此结果很好地给出了实验上两种α,β不饱和羧酸衍生物收率不同的原因. 炔烃与Cl₂IPrCuH的加成决定了反应的区域选择性, 其中电子效应是影响反应区域选择性的主要原因.     

Thioacetylacetone: structural and vibrational assignments.

Thioacetylacetone and its variously deuterated isotopomers have been investigated using electronic and vibrational spectroscopy combined with quantum chemical calculations. Thioacetylacetone is known for its photochromic properties, but the structures of the initial and final forms have been the subject of a long debate. Analysis of the IR spectra recorded in low-temperature argon and xenon matrices, room-temperature solutions, and in the gas phase has allowed us to establish the nature of the photochromic species and of its precursor. Similar to the case of another beta-thioxoketone, monothiodibenzoylmethane, the photo-product has been assigned to the nonchelated SH exo-rotamer of the (Z)-enethiol tautomeric form, whereas the dominant ground-state species corresponds to the chelated (Z)-enol tautomeric form. Detailed vibrational assignments have been proposed for both forms based on quantum chemical calculations and polarization experiments. In the case of the chelated (Z)-enol species prevailing in the ground state, a second-order perturbative anharmonic analysis at the B3LYP/cc-pVTZ level indicated strong anharmonic effects associated with the intramolecular hydrogen bond, leading to a shift of more than 600 cm-1 of the wavenumber of the OH-stretching vibration. A small fraction of the SH endo-rotameric chelated (Z)-enethiol form was also detected under unperturbed conditions. The (Z)-enethiol form can be converted into the (Z)-enol form by irradiation at 290 nm.