Diruthenium(II,III) tetramidates as a new class of oxygenation catalysts

Two new diruthenium(II,III) tetramidate compounds, Ru(2)(NHOCC(CH(3))(2))(4)Cl (1) and Ru(2)(NHOCCH(2)CH(3))(4)Cl (2) have been prepared and structurally characterized by X-ray crystallography. The activity of promoting sulfide oxygenation using simple oxidants such as hydrogen peroxide (H(2)O(2)) and tert-butyl hydroperoxide (TBHP) was studied. A UV-kinetics study indicated that the initial rates of 1 and 2 are comparable to the previously studied diruthenium tetracarboxylates in promoting TBHP oxygenation of methyl phenyl sulfide (MPS). Using excess oxidant and CH(3)CN as the solvent, organic sulfides MPS and diphenyl sulfide (PPS) were oxidized using 1 mol% of the catalytic species. Compound 1 is more effective than 2 in converting sulfides to sulfoxide under the same conditions. Fast conversion was achieved when the reactions were carried out in the solvent-free conditions, and the major oxidation product was the sulfoxide. The electronic structure of the title compounds was studied with DFT calculations to gain an understanding of the activation of peroxy reagents.     

Ti-MWW分子筛催化叔丁基过氧化氢氧化脱硫

以Ti-MWW为催化剂,考察了不同氧化剂对分别含有苯并噻吩、二苯并噻吩和4,6-二甲基二苯并噻吩等有机硫化物模拟油品氧化反应的影响,结果表明,叔丁基过氧化氢对有机含硫化合物的氧化活性明显高于过氧化氢水溶液。以叔丁基过氧化氢为氧化剂,三种噻吩类含硫化合物氧化的难易顺序为二苯并噻吩> 4, 6-二甲基二苯并噻吩> 苯并噻吩,其氧化活性顺序与含硫化合物中硫原子的电子云密度和空间位阻有关。考察了Ti-MWW/叔丁基过氧化氢催化氧化体系对成品柴油的催化氧化脱硫,结果表明,成品柴油中的含硫化合物可被有效地氧化脱除,在优化的反应条件下,经过两次氧化、萃取后,成品柴油中的总硫含量从1015μg/mL降低至11μg/mL,总脱硫率达到99%。     

Mechanism of the oxidation of sulfides by dioxiranes. 1. Intermediacy of a 10-S-4 hypervalent sulfur adduct

Earlier studies established that dimethyldioxirane (1a) reacts with sulfides 2 in two consecutive concerted electrophilic oxygen-transfer steps to give first sulfoxides 3 and then sulfones 4. The same sequential electrophilic oxidation model was assumed for the reaction of sulfides 2 with the strongly electrophilic methyl(trifluoromethyl)dioxirane (1b). In this paper we report on a systematic and general study on the mechanism of the reaction of simple sulfides 2 with DMDO (1a) and TFDO (1b) which provides clear evidence for the involvement of hypervalent sulfur species in the oxidation process. In the oxidation of sulfides 2a-c, diphenyl sulfide (2d), para-substituted aryl methyl sulfides 2e-i, and phenothiazine 2k with 1b, the major product was the corresponding sulfone 4, even when a 10-fold excess of sulfide relative to 1b was used. The sulfone:sulfoxide 4:3 ratio depends among other factors on the dioxirane 1a or 1b used, the sulfide substitution pattern, the polar, protic, or aprotic character of the solvent, and the temperature. The influence of these factors and also deuterium and (18)O tracer experiments performed allow a general mechanism to be depicted for these oxidations in which the key step is the reversible cyclization of a zwitterionic intermediate, 6, to form a hypervalent sulfur species, 7. The classical sequential mechanism which establishes that sulfides are oxidized first to sulfides and then to sulfones can be enclosed in our general picture of the process and represents just those particular cases in which the zwitterionic intermediate 6 decomposes prior to undergoing ring closure to afford the hypervalent sulfurane intermediate 7.     

Facile and Selective Oxidation of Sulfides to Sulfoxides by t-Butyl Hydroperoxide in Aqueous Medium

The oxidation of sulfides to sulfoxides with TBHP in water only occurs selectively with high yields and permits the sulfoxides to be prepared without using organic solvents. When the reaction is performed in aqueous sulfuric acid with a H₂SO₄/sulfide molar ratio of 20/1, the oxidation rate is greatly increased.     

Singlet oxygen promoted carbon-heteroatom bond cleavage in dibenzyl sulfides and tertiary dibenzylamines. Structural effects and the role of exciplexes

The C-heteroatom cleavage reactions of substituted dibenzyl sulfides and substituted dibenzylcyclohexylamines promoted by singlet oxygen in MeCN have been investigated. In both systems, the cleavage reactions (leading to benzaldehyde and substituted benzaldehyde) were slightly favored by electron-withdrawing substituents with rho values of +0.47 (sulfides) and +0.27 (amines). With dibenzyl sulfides, sulfones were also obtained whereas sulfoxide formation became negligible when the reactions were carried out in the presence of a base. Through a careful product study for the oxidation of dibenzyl sulfide, in the presence and in the absence of Ph2SO, it was established that sulfone and cleavage product (benzaldehyde) do not come by the same route (involving the persulfoxide and the hydroperoxysulfonium ylide) as required by the generally accepted mechanism (Scheme 1) for C-heteroatom cleavage reactions of sulfides promoted by singlet oxygen. On this basis and in light of the similar structural effects noted above it is suggested that dibenzyl sulfides and dibenzylamines form benzaldehydes by a very similar mechanism. The reaction with singlet oxygen leads to an exciplex that can undergo an intracomplex hydrogen atom transfer to produce a radical pair. With sulfides, collapse of the radical pair leads to an alpha-hydroperoxy sulfide than can give benzaldehyde by an intramolecular path as described in Scheme 3. With amines, the radical pair undergoes an electron-transfer reaction to form an iminium cation that hydrolyzes to benzaldehyde. From a kinetic study it has been established that the fraction of exciplex converted to aldehyde is ca. 20% with sulfides and ca. 7% with amines.     

Ionization of aromatic sulfides in nonpolar media: free vs reaction-controlled electron transfer

The primary products of the bimolecular free electron transfer (FET) from aromatic sulfides (PhSCH2Ph, PhSCHPh2, PhSCPh3) to n-butyl chloride radical cations are two radical cation conformers: a dissociative and a metastable one. In analogy with formerly studied donor systems, this result seems to reflect femtosecond oscillations in the ground state of the sulfides such as torsion motions around the Ar-S bond. This motion is accompanied by a marked electron fluctuation within the HOMO (or the n) orbitals. The FET products observed in the nanosecond time scale such as the metastable sulfide radical cations (Ar-S-CR3*+), the dissociation products R3C+; and R3C*, and their (experimentally) nondetectable counterparts Ar-S* as well as Ar-S+ can be understood with the simplified assumption of two extreme conformations, namely a planar and a twisted donor molecule. Using mediator radical cations (benzene, butylbenzene, biphenyl), the stepwise reduction of the free energy of the electron transfer from -DeltaH = 2.5 to 相似文献   

2,10－莰烷二醇衍生的钛络合物催化的不对称硫醚氧化及其机理

在2,10－莰烷二醇/钛催化的亚砜化反应中,枯烯过氧化氢(CHP)和叔丁基过氧化氢(TBHP)分别给出R构型和S构型亚砜。在动力学拆分过程中,用CHP作氧化剂导致亚砜的构型发生逆转,但是用TBHP则保留不变。基于这些结果和电喷雾质谱(ESI－MS)数据,亚砜化反应的机理推测为分子内亲核氧转移到络合的硫醚底物上。     

Molecular addition compounds. 17. Borane and chloroborane adducts with organic sulfides for hydroboration

The following sulfides have been examined as borane carriers in comparison with dimethyl sulfide and 1,4-oxathiane: tert-butyl methyl sulfide, isoamyl methyl sulfide, ethyl isoamyl sulfide, tert-butyl isoamyl sulfide, diisoamyl sulfide, tetrahydrothiophene, tetrahydro-thiopyran, thioanisole, 3-ethylthiotetrahydrofuran, bis(3-tetrahydrofuryl) sulfide, and bis(2-methoxyethyl) sulfide. Their complexing ability toward borane increases in the following order: thioanisole < ether-sulfides < dialkyl sulfides < dimethyl sulfide. Borane adducts of the sulfides are liquids above 0 degrees C. The thioanisole adduct loses diborane at room temperature. The reactivity of the adducts toward 1-octene increases in the reversed order of the complexing ability of the sulfides. Diisoamyl sulfide has a mild, ethereal, agreeable aroma, its synthesis is economical and the borane adduct, 4.2 M in BH3, is stable over prolonged periods at room temperature. The sulfide can be recovered from hydroboration-oxidation products by distillation. Consequently, diisoamyl sulfide is a new promising borane carrier. Bis(2-methoxyethyl) sulfide, easily synthesized from the low cost thiodiethanol, is three times more soluble in water than 1,4-oxathiane. Its borane adduct is 6.0 M in BH3 and can substitute for more expensive borane-1,4-oxathiane in hydroboration reactions. Applications of these new borane adducts in the synthesis of mono- and dichloroborane adducts was also studied. The equilibrium ratios observed for the new chloroborane adducts were similar to that observed for dimethyl sulfide adducts. However, the hydroboration of 1-octene with these new chloroborane adducts are much faster than the corresponding adducts of dimethyl sulfide, which are currently used extensively.     

二价钌催化的金属卡宾经由的硫叶立德[2,3]-σ重排反应研究

报道烯(炔)基硫醚与α-重氮羰基化合物, 在[RuCl₂(p-cymene)]₂催化下, 经由金属卡宾发生硫叶立德[2,3]-σ重排反应(Doyle-Kirmse反应). 在Ru(II)作用下, α-重氮羰基化合物与烯丙基硫醚的反应以较好收率生成相应的[2,3]-σ重排产物高烯丙基硫醚. 同样条件下与炔丙基硫醚的反应则生成[2,3]-σ重排产物联烯和呋喃衍生物, 后者是联烯进一步在Ru(II)作用下重排的产物.     

Asymmetric sulfoxidation of a β-carbonyl sulfide series by chloroperoxidase

The chloroperoxidase (CPO)-catalyzed oxidation of a series of β-carbonyl sulfides to sulfoxides has been studied at room temperature in aqueous citrate buffer. For dialkyl β-carbonyl sulfides, the products with methyl and ethyl substituents are obtained in ca. 100% yield. However when the alkyl group is n-propyl or i-propyl the yield drops dramatically (25%). An aryl sulfide derivative afforded product in very low yield (4%), but when the phenyl group bears a carbonyl, and the sulfur substituents are methyl or ethyl, the oxidation occurs with high yields (91–95%). Steric control of the sulfoxidation reaction is also confirmed with cyclohexanone derivatives, where a low product yield is observed even at high enzyme concentrations. Noteworthy are the yields obtained with cyclopentanone sulfide (65%) and an unexpected quantitative yield obtained with the γ-butyrolactone sulfide.     

Alloxazine-cyclodextrin conjugates for organocatalytic enantioselective sulfoxidations

Four structurally different alloxazine-cyclodextrin conjugates were prepared and tested as catalysts for the enantioselective oxidation of prochiral sulfides to sulfoxides by hydrogen peroxide in aqueous solutions. The alloxazinium unit was appended to the primary face of α- and β-cyclodextrins via a linker with variable length. A series of sulfides was used as substrates: n-alkyl methyl sulfides (n-alkyl = hexyl, octyl, decyl, dodecyl), cyclohexyl methyl sulfide, tert-butyl methyl sulfide, benzyl methyl sulfide and thioanisol. α-Cyclodextrin conjugate having alloxazinium unit attached via a short linker proved to be a suitable catalyst for oxidations of n-alkyl methyl sulfides, displaying conversions up to 98% and enantioselectivities up to 77% ee. β-Cyclodextrin conjugates were optimal catalysts for the oxidation of sulfides carrying bulkier substituents; e.g. tert-butyl methyl sulfide was oxidized with quantitative conversion and 91% ee. Low loadings (0.3-5 mol%) of the catalysts were used. No overoxidation to sulfones was observed in this study.     

Chemical and electrochemical processes in low-temperature superionic hydrogen sulfide sensors

Effect the morphology of the surface of the working electrode (PbS) exerts on the sensitivity of a low-temperature potentiometric hydrogen sulfide sensor is studied. The sensor, which is based on electrochemical cell Na _x WO₃/NASICON/PbS, may be used for fast selective detection of hydrogen sulfide in air in natural conditions. It is demonstrated that the sensors with PbS that are deposited out of solution have a faster response than the pressed-to ones. The dependence of EMF on the hydrogen sulfide concentration for the former is linear in semilogarithmic coordinates. Thus difference is explained by the microstructure of the lead sulfide layer. It is shown that the lead sulfide interaction with hydrogen sulfide involves a reversible partial reduction of sulfur and lead at the surface. The species that form in so doing contain sulfur atoms in lower oxidation degrees (poly-and oligo sulfides, sulfite). A mechanism of the sensor operation is proposed on the basis of data yielded by experiment and quantum-chemical simulation. The mechanism includes reversible transport of hydrogen from sulfur atoms to oxygen atoms.     

Diastereoselective synthesis of N-sulfinyl α-aminophosphine sulfides and phosphines

The diastereoselective synthesis of N-sulfinyl α-aminophosphine sulfides and phosphines is reported. These molecules are synthesized by formation of sulfinyl imine followed by diastereoselective addition of a diphenylphosphine sulfide. The product N-sulfinyl α-aminophosphine sulfides can be converted to phosphines through removal of the sulfur by reaction with Raney nickel. Hydrolysis of the sulfinyl group provides an amine that can then be attached to other ligands or structural scaffolds.     

Magnetic properties of chromium sulfide selenides and sulfides

Summary The structural parameters of chromium sulfide selenides are intermediate between those of the sulfides and the selenides. The nature of the dependence of the magnetic properties of the sulfide selenides on temperature and composition has much in common with that for the sulfides. The presence of selenium atoms in the sulfide lattice leads merely to some distortion of the anomalies which are observed for the pure sulfides. In the mixed chalcogenides of chromium, gradual oxidation of the monosulfide by selenium takes place, with the conversion of Cr(II) into Cr(III). The principal contribution to the magnetic moments is made by the spin values, equal to 4.9 _B for Cr(II) and 3.87 _B for Cr(III). The slight increase in the lattice parameters of the sulfide selenides (increase in the Cr–Cr distances) compared with the sulfides leads to a decrease in the exchange interactions in the sulfide selenides compared with the sulfides. This is indicated by the change in the paramagnetic Curie temperature with change in composition.Institute of Catalysis, Siberian Branch, Academy of Sciences of the USSR. Translated from Zhurnal Strukturnoi Khimii, Vol. 14, No. 1, pp. 163–166, January–February, 1973.     

Oxygen transfer reactions. 4. Reaction of high valent oxoruthenium compounds with sulfides

The oxidation of methoxy substituted benzyl phenyl sulfides can be used to distinguish between oxidants that react by single electron transfer (followed by oxygen rebound) and those which react by direct oxygen atom transfer in a two-electron process. Transfer of a single electron results in the formation of an intermediate radical cation, which can undergo C-S bond cleavage and deprotonation reactions leading to the formation of methoxy substituted benzyl derivatives, methoxy substituted benzaldehydes, and diphenyl disulfide. The oxidation of 4-methoxybenzyl phenyl sulfide and 3,4,5-trimethoxybenzyl phenyl sulfide by oxidants known to participate in single electron transfers (Ce(4+), Mn(3+), and Cr(6+)) results in the formation of the corresponding benzaldehydes, benzyl alcohols, benzyl acetates, and benzyl nitrates in variable yields. However, the only products obtained from the oxidation of the same compounds with RuO(4), RuO(4-), and RuO(4)(2-) are sulfoxides and sulfones. Therefore, it is concluded that the oxidation of sulfides by oxoruthenium compounds likely proceeds by a concerted mechanism.     

Determination of volatile alkyl sulfides in wastewater by headspace solid-phase microextraction followed by gas chromatography-mass spectrometry

An analytical procedure based on headspace solid-phase microextraction (SPME) followed by gas chromatography coupled to mass spectrometry in the electron impact mode has been developed for the determination of low-molecular-mass sulfides and disulfides in wastewater. Parameters affecting to the extraction of these volatile alkyl sulfides (VASs) with the SPME, such as the extraction temperature, sample volume, pH and the NaCl addition to the matrix, have been optimised using a polydimethylsiloxane-Carboxen fibre. The linear dynamic range was close to three orders of magnitude for all the studied compounds. Detection limits of 4 ng l(-1) for dimethyl sulfide, 0.7 ng l(-1) for ethylmethyl sulfide, 5 ng l(-1) for diethyl sulfide and 1 ng l(-1) for dimethyl disulfide were achieved, with a relative standard deviation between 4 and 6%. The developed analytical methodology was applied to determine those VASs in different wastewaters.     

Oxidation of organic sulfides by vanadium haloperoxidase model complexes

In addition to halide oxidation, the vanadium haloperoxidases are capable of oxidizing sulfides to sulfoxides. Four vanadium complexes with tripodal amine ligands, K[VO(O(2))(heida)] (1), VO(2)(bpg) (2), K[VO(2)(ada)] (3), and K(2)[VO(O(2))(nta)] (4), previously shown to perform bromide oxidation (Colpas, G. J.; Hamstra, B. J.; Kampf, J. W.; Pecoraro, V. L. J. Am. Chem. Soc. 1996, 118, 3469-3477), have now been shown to oxidize aryl alkyl sulfides to the corresponding sulfoxides. The oxidation was observed by the disappearance of thioanisole's ultraviolet absorption at 290 nm, by the change in the aromatic region of the (1)H NMR spectrum of the sulfides, and by changes in the complexes' (51)V NMR spectra. The amount of methyl phenyl sulfide oxidized in 3 h was 1000 equiv (per metal complex). The oxidation product is almost exclusively sulfoxide, with very little sulfone (less than 3% over a 3 h experiment) formed. This is consistent with an electrophilic oxidation mechanism, as had been proposed for oxidation of bromide by 1-4. The rate was found to be first order in substrate concentration, similar to the rate law observed for bromide oxidation. Unlike the bromide oxidation, the equivalent of acid required for peroxovanadium complex activation is not consumed. The complexes 1-4 are not reactive with styrene or cyclooctene. The relevance of these reactions to the mechanism of the vanadium haloperoxidases and, more generally, peroxovanadium oxygenation of sulfides will be discussed.     

The first application of titanocenes in the asymmetric oxidation of sulfides

Investigations were carried out on the oxidation of sulfides to sulfoxides catalyzed by the commercial Cp₂Ti(X)₂ (X=Cl, OTf)/t-butyl hydroperoxide (TBHP). The asymmetric version of prochiral sulfides oxidation was achieved using Cp₂TiCl₂, as transition metal catalyst, in the presence of (+)-(R)-BINOL, as chiral ligand and activated 4 Å molecular sieves (m.s.).     

Selective Hydrogenation of Diethyl Disulfide to Ethanethiol in the Presence of Sulfide Catalysts

The gas-phase reaction of diethyl disulfide hydrogenation at atmospheric pressure in the presence of supported transition metal sulfides was studied. The reaction of diethyl disulfide with hydrogen at T = 200°C resulted in ethanethiol, and the selectivity to ethanethiol was no lower than 94%. The selectivity decreased at a higher temperature because of diethyl disulfide decomposition to ethylene and hydrogen sulfide. The reaction of diethyl disulfide in the presence of hydrogen occurred at a higher rate and selectivity than that in an atmosphere of helium. The activity of metal sulfides supported on aluminum oxide was higher than on the other studied supports—aluminosilicate, silica gel, and a carbon support. Metal sulfides supported on Al₂O₃ were arranged in the following order according to their activity: Rh > Ru > Mo Pd > Ni > W. Bimetallic catalysts were less active than monometallic catalysts. The activity of catalysts increased with the sulfide sulfur content; the partial reduction of metal sulfides also increased the catalytic activity.     

One-pot synthesis of porous nickel–manganese sulfides with tuneable compositions for high-performance energy storage

Mixed-metal compounds, especially for the sulfides, have been investigated as a very attractive type of electroactive materials for supercapacitors. In this work, we demonstrate nickel?manganese (Ni?Mn) sulfides are very attractive for supercapacitors with promising electrochemical performance. The Ni?Mn sulfides with different Ni to Mn ratios have been synthesized via a facile one-pot hydrothermal method, which show a similar structure of interconnected particles and are very porous in microstructure. And then, the Ni?Mn sulfides are investigated by three-electrode measurements and demonstrate strong synergy between Ni and Mn. The Ni?Mn sulfide with a Ni to Mn ratio of 2:1 demonstrates superior performance of 1068?F?g^?1 at 1?A?g^?1. Lastly, The Ni?Mn sulfide with a Ni to Mn ratio of 2:1 are used as positive electrode for two-electrode test, and the asymmetric supercapacitor shows both high energy and power densities combined with excellent cycling stability. Our work demonstrates that the Ni?Mn sulfides are also very electrochemical active for supercapacitors and their performance can be tuned by changing the Ni to Mn ratio.

Open image in new window