NMR spectroscopic investigation of multi-walled carbon nanotubes modified by amino groups

The results of the functionalization of multi-walled carbon nanotube surface by amines containing different substituents at the nitrogen atom, namely, primary n-hexylamine, secondary izadrine, and tertiary N-benzylmorpholine and dithiline, are presented. It was shown by NMR spectroscopy, thermal analysis, mass spectrometry, X-ray photoelectron spectroscopy, and elemental analysis that the interaction of primary and secondary amines with modified nanotubes results in the formation of a covalent bond with the nitrogen atom of amines, while the reactions with tertiary amines afford quaternary ammonium salts; diamine is attached covalently through both amine groups.     

Electrospray Ionization Tandem Mass Spectrometry of Ammonium Cationized Polyethers

Quaternary ammonium salts (Quats) and amines are known to facilitate the MS analysis of high molar mass polyethers by forming low charge state adduct ions. The formation, stability, and behavior upon collision-induced dissociation (CID) of adduct ions of polyethers with a variety of Quats and amines were studied by electrospray ionization quadrupole time-of-flight, quadrupole ion trap, and linear ion trap tandem mass spectrometry (MS/MS). The linear ion trap instrument was part of an Orbitrap hybrid mass spectrometer that allowed accurate mass MS/MS measurements. The Quats and amines studied were of different degree of substitution, structure, and size. The stability of the adduct ions was related to the structure of the cation, especially the amine’s degree of substitution. CID of singly/doubly charged primary and tertiary ammonium cationized polymers resulted in the neutral loss of the amine followed by fragmentation of the protonated product ions. The latter reveals information about the monomer unit, polymer sequence, and endgroup structure. In addition, the detection of product ions retaining the ammonium ion was observed. The predominant process in the CID of singly charged quaternary ammonium cationized polymers was cation detachment, whereas their doubly charged adduct ions provided the same information as the primary and tertiary ammonium cationized adduct ions. This study shows the potential of specific amines as tools for the structural elucidation of high molar mass polyethers.     

Mechanism of reversible fluorescent staining of protein with epicocconone

[reaction: see text] Epicocconone is the active ingredient in Deep Purple Total Protein Stain and responsible for the apparent noncovalent staining of proteins in polyacrylamide gel and electroblots. Reaction of epicocconone with amines has shown that epicocconone reacts reversibly with primary amines to produce a highly fluorescent enamine that is readily hydrolyzed by base or strong acid such as in conditions used in post-electrophoretic analysis such as peptide mass fingerprinting or Edman degradation.     

Analysis of primary aromatic amines using precolumn derivatization by HPLC fluorescence detection and online MS identification

2-(2-phenyl-1H-phenanthro-[9,10-d]imidazole-1-yl)-acetic acid (PPIA) and 2-(9-acridone)-acetic acid (AAA), two novel precolumn fluorescent derivatization reagents, have been developed and compared for analysis of primary aromatic amines by high performance liquid chromatographic fluorescence detection coupled with online mass spectrometric identification. PPIA and AAA react rapidly and smoothly with the aromatic amines on the basis of a condensation reaction using 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) as dehydrating catalyst to form stable derivatives with emission wavelengths at 380 and 440 nm, respectively. Taking six primary aromatic amines (aniline, 2-methylaniline, 2-methoxyaniline, 4-methylaniline, 4-chloroaniline, and 4-bromoaniline) as testing compounds, derivatization conditions such as coupling reagent, basic catalyst, reaction temperature and time, reaction solvent, and fluorescent labeling reagent concentration have also been investigated. With the better PPIA method, chromatographic separation of derivatized aromatic amines exhibited a good baseline resolution on an RP column. At the same time, by online mass spectrometric identification with atmospheric pressure chemical ionization (APCI) source in positive ion mode, the PPIA-labeled derivatives were characterized by easy-to-interpret mass spectra due to the prominent protonated molecular ion m/z [M + H](+) and specific fragment ions (MS/MS) m/z 335 and 295. The linear range is 24.41 fmol-200.0 pmol with correlation coefficients in the range of 0.9996-0.9999, and detection limits of PPIA-labeled aromatic amines are 0.12-0.21 nmol/L (S/N = 3). Method repeatability, precision, and recovery were evaluated and the results were excellent for the efficient HPLC analysis. The most important argument, however, was the high sensitivity and ease-of-handling of the PPIA method. Preliminary experiments with wastewater samples collected from the waterspout of a paper mill and its nearby soil where pollution with aromatic amines may be expected show that the method is highly validated with little interference in the chromatogram.     

Determination of primary aromatic amines in water food simulant using solid-phase analytical derivatization followed by gas chromatography coupled with mass spectrometry

Solid phase analytical derivatization with trifluoroacetic anhydride has been introduced as sample preparation for the determination of primary aromatic amines in water by gas chromatography coupled with mass spectrometry. Water was used as a food simulant for testing migration from laminated flexible food packaging materials. The method was evaluated for 8 primary aromatic amines in 200 ml water samples, which resulted in detection limits in the 0.1-0.4 microg/l range, relative standard deviations in the 4-17% range and acceptable linearity (R2 = 0.997-1.000). Detectable levels of 2,4-diaminotoluene, 2,6-diaminotoluene and 4,4'-methylenedianiline were found in water food simulant from some of the investigated food packaging materials.     

Integrated sample-pretreatment strategy for separation and enrichment of microplastics and primary aromatic amines in the migration of teabag

In this work, an integrated sample-pretreatment strategy for the separation and enrichment of microplastics and primary aromatic amines from the migration of teabag was developed. The migration solution of teabag was passed through a homemade device. The microplastics were firstly captured by a silver membrane, and then the primary aromatic amines were enriched by a solid-phase extraction column. The microplastics migrated from teabag were detected by attenuated total reflection-Fourier transform infrared spectrometer and Raman spectroscopy. The data showed the character, the number of particles, area ratio, and morphology of microplastics migrated from the teabag. Subsequently, after the enrichment procedure, a sensitive analytical method for primary aromatic amines was established followed by ultra-high performance liquid chromatography-tandem mass spectrometry. The method showed wide linear ranges with R² greater than 0.9915, low limits of detection (2–18 ng/L), and low limits of quantification (8–50 ng/L). The developed method was adopted to analyze microplastics and primary aromatic amines migrated from nylon and polyethylene terephthalate teabag under different temperatures and times. The integrated sample-pretreatment strategy displayed promising potentials in the one-step preparation of the microplastics and hazardous molecules in the sample of environment and food security.     

Identification of amphetamine isomers by GC/IR/MS

The methods of gas chromatography/Fourier transform infrared spectroscopy (GC/FTIR) and gas chromatography/infrared spectroscopy/mass spectrometry (GC/IR/MS) are evaluated for their ability to differentiate side chain isomers of amphetamine. It is found that absorption bands from 3000 to 2850 cm-1 and 900 to 650 cm-1 are most useful for differentiating the alkyl amines, while the bands from 1600 to 900 cm-1 are only useful for differentiating primary amines from the other substituted amines. The combination of GC/IR/MS is superior for differentiating these side chain isomers.     

A pitfall of using 2‐[(2E)‐3‐(4‐tert‐butylphenyl)‐2‐methylprop‐2‐enylidene]malononitrile as a matrix in MALDI TOF MS: chemical adduction of matrix to analyte amino groups

2‐[(2E)‐3‐(4‐tert‐Butylphenyl)‐2‐methylprop‐2‐enylidene]malononitrile (DCTB) has been considered as an excellent matrix for matrix‐assisted laser desorption/ionization (MALDI) of many types of synthetic compounds. However, it might provide troublesome results for compounds containing aliphatic primary or secondary amino groups. For these compounds, strong extra ion peaks with a mass difference of 184.1 Da were usually observed, which might falsely indicate the presence of some unknown impurities that were not detected by other matrices. On the basis of the possible mechanisms proposed, these extra ions are the products of nucleophilic reactions between analyte amino groups and DCTB molecules or radical cations. In these reactions, an amino group replaces the dicyanomethylene group of DCTB forming a matrix adduct via a ? C?N‐bond. An aliphatic primary amine could react easily with DCTB and the reaction could start once they are mixed in a MALDI solution. For an aliphatic secondary amine, on the other hand, the reaction most likely occurs in the gas phase. Protonation of amino groups by adding acid seems to be a useful way to stop DCTB adduction for compounds with one single amino group, but not for compounds with multiple amino groups. Unlike aliphatic primary or secondary amines, aliphatic tertiary amines and aromatic amines do not yield DCTB adducts. This is because tertiary amines do not have the required transferrable H‐(N) atom to form an extra ? C?N‐bond, while aromatic amines are not sufficiently nucleophilic to attack DCTB. In view of the possible matrix adduction, care should be taken in MALDI time‐of‐flight mass spectrometry (TOF MS) when DCTB is used as the matrix for compounds containing amino group(s). Copyright © 2010 John Wiley & Sons, Ltd.     

Réactivité des cinnamoyl-3 pyrones-2 vis à vis des amines primaires

The reaction of primary amines (methylamine, isopropylamine, benzylamine) in neutral medium, on 3-cinnamoyl-2-pyrones gave 7-amino-3,5-dioxo-l,6-octadienes 2 . The formation of these compounds is presumed to occur via nucleophilic attack of amines with a ring opening reaction followed by decarboxylation. Their structures were determined unambiguously by ¹H, ¹³C nmr spectroscopy, elemental analysis and mass spectrometry.     

Sterically hindered aliphatic amines in the controlled synthesis of polystyrene

The kinetic features of radical polymerization of styrene in the presence of primary and secondary aliphatic amines combined with benzoyl peroxide and the molecular-mass characteristics of the resulting polymers were studied. In the presence of peroxide initiators, aliphatic amines, as potential sources of stable aminoxyl radicals, provide the synthesis of polystyrene with a controlled molecular mass without gel effect at a relatively high rate. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 159–164, January, 2007.     

Rearrangement and hydrogen abstraction reactions of amine cation radicals: a gas-phase analogy to the Hofmann-Löffler-Freytag reaction

Low-energy molecular ions of gas-phase primary and secondary aliphatic amines undergo reciprocal NH/CH exchange of hydrogen atoms prior to fragmentation on the microsecond time-scale; the subsequent decomposition reactions are significantly different from those observed in the mass spectrometer ion source.     

Mass spectrometric studies on cyclo- and poly-phosphazenes: 4—Attempts at mass spectrometrically induced polymerization of cyclotriphosphazenes substituted with primary and secondary amines

In this paper, the mass spectrometric behaviour of cyclophosphazenes substituted with primary and secondary amines is investigated, together with the mass spectrometric polymerization pattern of these compounds. While it is not possible to achieve the mass spectrometric polymerization of hexa(anilino)cyclotriphosphazene, ion–molecule reactions take place in the case of hexa(piperidino)- and hexa(morpholino)cyclotriphosphazenes, which lead to the formation of hexameric species. Evidence is given that pentasubstituted cyclophosphazenephosphorus cations are the species responsible for the oligomerization process.     

Determination of aromatic primary amines at microg l(-1) level in environmental waters by gas chromatography-mass spectrometry involving N-allyl-n'-arylthiourea formation and their on-line pyrolysis to aryl isothiocyanates

Derivatization of aromatic primary amines to N-allyl-N'-arylthioureas by reaction with allyl isothiocyanate and GC-MS of the derivatives, when pyrolysis to aryl isothiocyanates occurs in the heated injector, has been used to determine aromatic amines in the range 0.5-50 microg l(-1) with a correlation coefficient, r, in the range 0.9902-0.9992. The limit of detection ranged 8 to 30 ng l(-1) when 60 ml of sample were preconcentrated, after derivatization, on a styrene-divinylbenzene copolymer sorbent. The pyrolytic cleavage of sym- and unsym-diaryl or alkyl-/arylthioureas has been rationalized. The chromatography of isothiocyanates is much superior to that of aryl amines and the specific mass fragmentation permits positive identification of amines. The method has been applied to spiked drinking water, groundwater and river water samples, when the recovery ranged from 84 to 109% with RSD of 5-9%, and to detect aromatic amines formed by reductive cleavage of azo dyes in effluents when the recovery of amine was in the range 81-95% with RSD 8-15%. The method is not applicable to nitroanilines.     

o-(Pentafluorobenzyloxycarbonyl)benzoyl chloride: a novel electrophoric derivatisation reagent for amino compounds designed for negative ion chemical ionisation mass spectrometry

The synthesis of a novel electrophoric derivatisation reagent, o-(pentafluorobenzyloxycarbonyl)benzoyl chloride, is described. The reagent was tested against selected primary and secondary amino compounds as analytical targets. The derivatives exhibit excellent mass spectral properties under negative ion chemical ionisation (NICI), i.e. reduced fragmentation and thus high ion current for the targeted m/z during analysis. Since the reagent bears a pentafluorobenzyl ester group, resulting mass NICI mass spectra were expectedly dominated by dissociative resonance electron capture typically observed with these compounds. The reagent is suitable for detecting volatile primary and secondary amines with high sensitivity. Background is reduced by a shift in detected m/z and retention time, as demonstrated for the analysis of the drug methylphenidate from human plasma.     

Dehydrogenation of tertiary amines in matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

In the matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI TOF MS) analysis of various compounds synthesized in our laboratory, strong [M - H]+ ion peaks were often observed for the molecules with tertiary amino groups. In this work, the MALDI TOF MS behavior of two groups of compounds that incorporate tertiary amino moieties was investigated. One group is bisurea dimethylanilines (BUDMAs) prepared for the study of molecular recognition in thermoplastic elastomers, and the other group is the poly(propylene imine) diaminobutane dendrimers. The results clearly demonstrate the appearance of the [M - H]+ ions. In order to understand the possible mechanisms for the generation of these ions, a series of model compounds, ranging from primary to tertiary amines, were investigated. Unlike the tertiary amines, no [M - H]+ ion peaks were recorded for the primary amines, and only barely detectable ones, if any, for some secondary amines. It appears that the tertiary amino groups play an important role in the formation of these ions. In addition to MALDI TOF MS analysis, these samples were also applied to electrospray ionization (ESI) MS where no [M - H]+ ions were observed. The results indicate that the generation of [M - H]+ ion is due to the unique MALDI conditions and is likely to be formed via dehydrogenation of a protonated tertiary amine resulting in an N=C double bond. The absence of [M - H]+ ion peaks for the primary and secondary amines is probably because upon their formation these ions could easily transfer one proton to the corresponding amines in the MALDI gas-phase plume, yielding neutral imines that cannot be detected by MS.     

Kinetics of amine-cyclic anhydride reactions in moderately polar solutions

The validity of extrapolating the reactivity of low molar mass compounds in solution to the polymer-analogous chemistry between polymer-bound functionality is investigated for the reaction of primary amines with cyclic anhydrides in the moderately polar solvents, anisole and tetraethyleneglycol dimethylether. The kinetics of amic-acid formation and imidization of polymeric and small molecule mixtures measured by Fourier-Transform Infrared Spectroscopy at near-ambient and elevated temperatures are compared. A Significant decrease in both reaction rates is observed upon changing the primary amine from aliphatic to benzylic, benzylic to 1,2-diphenylethylamine, and 1,2-diphenylethylamine to polystyrene-bound 1,2-diphenylethylamine. Reasons for the influence of polymer-bound chemical functionality on the reaction rates for these amines are discussed. The imidization step is found to be rate limiting in the reaction of phthalic anhydride with benzylamine at the functional group concentrations reported (0.14M or less). © 1995 John Wiley & Sons, Inc.     

Azetidinyl ketones. Synthesis of 1-Alkyl-2,4-diphenyl-3-benzoylazetidines

α-(α'-Bromobenzyl)chalcone ( 3 ) reacts with primary amines (t-butyl, isopropyl,cyclohexyl) to give α-(α'-alkylaminobenzyl)chalcones ( 4, 5 and 6 ). When these allylic amines are treated with hydrogen bromide followed by reaction with base, they produce l-alkyl-2,4-diphenyl-3-benzoyl-azetidines ( 7,8 and 9 ). These azetidines were readily converted to their 3-deuterio derivatives ( 10 , 11 and 12 ) by treatment with sodium methoxide in deuteriomethanol. The configurations were assigned primarily by pmr spectra and mass spectra in reference to analogous compounds.     

Simultaneous spectrophotometric analysis of aliphatic amines utilizing thermochromism of charge-transfer complexes with tetrabromophenolphthalein ethyl ester.

Aliphatic amines, such as n-hexylamine (primary), di-n-hexylamine (secondary) and tri-n-hexylamine (tertiary amine), react with tetrabromophenolphthalein ethyl ester molecules (TBPEH) to form reddish or red-violet charge-transfer complexes (CT complexes) in 1,2-dichloroethane (DCE). The absorption maxima of the CT complexes with all primary amines occur at around 560 nm, with secondary amines at 570 nm and, with tertiary amines at 580 nm. The CT complex formation constants with TBPEH in DCE increase in the order of the primary, secondary and tertiary amines, but their constants decrease quantitatively with an increase in temperature. This phenomenon (thermochromism) could be applied to the simultaneous spectrophotometric determination of primary amine and secondary amine, or secondary amine and tertiary amine in a mixed solution utilizing the difference of absorbance with temperature changes.     

CO2 deactivation of supported amines: does the nature of amine matter?

Adsorption of CO(2) was investigated on a series of primary, secondary, and tertiary monoamine-grafted pore-expanded mesoporous MCM-41 silicas, referred to as pMONO, sMONO, and tMONO, respectively. The pMONO adsorbent showed the highest CO(2) adsorption capacity, followed by sMONO, whereas tMONO exhibited hardly any CO(2) uptake. As for the stability in the presence of dry CO(2), we showed in a previous contribution [J. Am. Chem. Soc.2010, 132, 6312-6314] that amine-supported materials deactivate in the presence of dry CO(2) via the formation of urea linkages. Here, we showed that only primary amines suffered extensive loss in CO(2) uptake, whereas secondary and tertiary amines were stable even at temperature as high as 200 °C. The difference in the stability of primary vs secondary and tertiary amines was associated with the occurrence of isocyanate as intermediate species toward the formation of urea groups, since only primary amines can be precursors to isocyanate in the presence of CO(2). However, using a grafted propyldiethylenetriamine containing both primary and secondary amines, we demonstrated that while primary amines gave rise to isocyanate, the latter can react with either primary or secondary amines to generate di- and trisubstituted ureas, leading to deactivation of secondary amines as well.     

Chemoselective organocatalytic aerobic oxidation of primary amines to secondary imines

Biomimetic aerobic oxidation of primary benzylic amines has been achieved by using a quinone catalyst. Excellent selectivity is observed for primary, unbranched benzylic amines relative to secondary/tertiary amines, branched benzylic amines, and aliphatic amines. The exquisite selectivity for benzylic amines enables oxidative self-sorting within dynamic mixtures of amines and imines to afford high yields of cross-coupled imine products.