THE EFFECT OF POLYMER ON THE CLOUD POINT OF A SERIES OF TRIBLOCK NONIONIC SURFACTANTS IN AQUEOUS SOLUTION

A series of triblock nonionic surfactants with different Propylene oxide and ethylene oxide chain lengths were synthesized. The triblock nonionic surfactants and poly(ethylene glycols) with different molecular weight were used, to find the effects of polymer chain length and size of the micelles on the cloud point of the surfactants. Two possible models are considered on the basis of cloud point changes of the solutions, to describe the polymer- surfactant interactions. One model suggests that flocculation depletion for the polymer chains exist between two regular micelles. This provides the driving force for the neighboring micelles to approach each other and destabilize the colloidal system. The flocculation effect is more important for polymers with a shorter chain block the approach of the micelles, since there is no typical polymer-surfactant association formed but just simple small molecule associations in which the steric and solvation effects of the polymer chains make the inter-micelles interactions repulsive. The other model considers that intra-chain micelles of polysoap are formed among the surfactant monomers and long polymer chains. The bridging attraction between two intra-chain micelles in such structures can enhance the collisions among the micelles, due to the exchange of amphiphilic monomers among the neighboring micelles.     

Interactions between Poly(ethylene oxide) and Sodium Alkylcarboxylates As Studied by Conductivity and Gel Permeation Chromatography

The interactions between PEO and sodium alkylcarboxylates (octyl, decyl, and dodecyl) have been investigated by conductivity measurements and gel permeation chromatography (GPC). Also included in the study was sodium dodecyl sulfate. From the conductivity measurements the critical aggregation concentration, ionization degree, and binding ratios were determined; the binding ratio was also determined from GPC. PEO–surfactant interactions were observed for all the studied surfactants, except sodium octanoate. For the polymer–surfactant complexes the ionization degree was in all cases observed to be about 0.2 higher than the ionization degree for the corresponding aqueous micelles. Further, the binding ratio decreased somewhat with decreasing chain length of the alkylcarboxylate. The Gibbs free energy showed that the polymer–surfactant interaction decreases with decreasing chain length of the alkylcarboxylates and is weaker for alkylcarboxylate compared to alkylsulfate of similar chain length.     

聚合物对非离子十二烷基聚氧乙烯聚氧丙烯醚浊点的影响

测定了水溶性高分子聚乙二醇(PEC1000、PEG2000、PEG6000)和聚乙烯吡咯烷酮(PVP-K30、PVP-K90)对三种非离子表面活性剂十二烷基聚氧乙烯聚氧丙烯醚C12H25O(EO)m(PO)nH(LS36,m=3,n=6;LS5,m=4,n=5;LS54,m=5,n=4)浊点的影响.结果表明,聚乙二醇(PEG)可使三种表面活性剂水溶液浊点降低;而聚乙烯吡咯烷酮(PVP)随其浓度增加,表面活性剂溶液浊点先升高然后又下降;浊点下降程度与聚合物浓度和分子量有关.     

Studies on the interactions between anionic surfactants and polyvinylpyrrolidone: Surface tension measurement, 13C NMR and ESR

 The interaction between anionic surfactants and polyvinylpyrrolidone (PVP) are investigated using ¹³C NMR, ESR spectroscopy and surface tension measurements at the air/water interface. The behavior of single-chained surfactant, sodium dodecyl sulphonate (AS), is compared with that of the double-chained surfactant, sodium bis(2-ethylhexyl) phosphate (NaDEHP). The results showed that a surfactant–polymer complex of “necklace and head structure” is formed in AS aqueous solutions in the presence of PVP due to the hydrophobic interaction between PVP and AS. The AS micelles nucleate on the polymer hydrophobic sites, and the mobility of the AS head groups is not affected. But, for NaDEHP surfactant, it was found that PVP is little effective in influencing the monomer–micelle equilibrium and no surfactant– polymer complex formed in the NaDEHP aqueous solution. Received: 8 May 1996 Accepted: 14 August 1997     

Influence of the surfactant chain length on the fluorescence properties of a water-soluble conjugated polymer

In this work, we report the influence of surfactant chain length and surfactant concentration on the photoluminescence (PL) of water-soluble pi-conjugated poly(thienyl ethylene oxide butyl sulfonate) (PTE-BS). We have used alkylammomium surfactants with 8, 9, 10, and 12 carbon atoms per hydrocarbon chain. The surfactant concentration was varied from 0.125 the critical micelle concentration (CMC) up to 2 times the CMC. The results show that at premicellar concentrations all the surfactants promote the polymer aggregation inducing an increase in the interchain charge transfer by pi-pi interactions, which competes with PL emission processes. However, in the premicellar range, the polymer PL emission is sharply affected by the surfactant chain length. Thus, the PL is quenched by the surfactants with the shortest tails, whereas the surfactants with the longest ones provoke an enhancement of the PL emission. This behavior has been associated with the capacity of the surfactants with the longest hydrocarbon chains to accommodate their tails inside the polymer, obstructing the appearance of pi-pi interchain interactions during aggregation and reducing intrachain defects. By contrast, at the CMC, the surfactant chain length does not modify the PL emission, since the excess of surfactant inhibits polymer aggregation, thus enhancing the efficiency of light emissive processes.     

Controllable synthesis of conducting polypyrrole nanostructures

Wire-, ribbon-, and sphere-like nanostructures of polypyrrole have been synthesized by solution chemistry methods in the presence of various surfactants (anionic, cationic, or nonionic surfactant) with various oxidizing agents [ammonium persulfate (APS) or ferric chloride (FeCl3), respectively]. The surfactants and oxidizing agents used in this study have played a key role in tailoring the nanostructures of polypyrrole during the polymerization. It is inferred that the lamellar structures of a mesophase are formed by self-assembly between the cations of a long chain cationic surfactant [cetyltrimethylammonium bromide (CTAB) or dodeyltrimethylammonium bromide (DTAB)] and anions of oxidizing agent APS. These layered mesostructures are presumed to act as templates for the formation of wire- and ribbon-like polypyrrole nanostructures. In contrast, if a short chain cationic surfactant octyltrimethylammonium bromide (OTAB) or nonionic surfactant poly(ethylene glycol) mono-p-nonylphenyl ether (Opi-10) is used, sphere-like polypyrrole nanostructures are obtained, whichever of the oxidizing agents mentioned above is used. In this case, micelles resulting from self-assembly among surfactant molecules are envisaged to serve as the templates while the polymerization happens. It is also noted that, if anionic surfactant sodium dodeyl surfate (SDS) is used, no characteristic nanostructures of polypyrrole were observed. This may be attributed to the doping effect of anionic surfactants into the resulting polypyrrole chains, and as a result, micelles self-assembled among surfactant molecules are broken down during the polymerization. The effects of monomer concentration, surfactant concentration, and surfactant chain length on the morphologies of the resulting polypyrrole have been investigated in detail. The molecular structures, composition, and electrical properties of the nanostructured polypyrrole have also been investigated in this study.     

Zwitterionic surfactants in ion binding and catalysis

Zwitterionic surfactants have unique properties for applications in separation methods and catalysis. Their properties and efficiencies depend on two main factors: surfactant structure and preferential interactions of zwitterionic surfactant interfaces with anions. Structural changes are related to hydrocarbon chain length, distance between charges, and type and order of functional groups in the polar head. Interactions of anions with zwitterionic micelles follow the Hofmeister series and change the surface charge. The interactions between surfactants and molecules/ions allow the rational control of separation by chromatography and micellar capillary electrophoresis; cloud point extraction; and stabilization and catalytic activity of biomolecules and nanoparticles.     

Structure of nonionic surfactant micelles in the ionic liquid ethylammonium nitrate

The structure of micelles formed by nonionic polyoxyethylene alkyl ether nonionic surfactants, C n E m , in the room-temperature ionic liquid, ethylammonium nitrate (EAN), has been determined by small-angle neutron scattering (SANS) as a function of alkyl and ethoxy chain length, concentration, and temperature. Micelles are found to form for all alkyl chains from dodecyl through to octadecyl. Dodecyl-chained surfactants have high critical micelle concentrations, around 1 wt%, and form weakly structured micelles. Surfactants with longer alkyl chains readily form micelles in EAN. The observed micelle structure changes systematically with alkyl and ethoxy chain length, in parallel with observations in aqueous solutions. Decreasing ethoxy chain length at constant alkyl chain length leads to a sphere to rod transition. These micelles also grow into rods with increasing temperature as their cloud point is approached in EAN.     

Unlike surfactant–polymer interactions of sodium dodecyl sulfate and sodium dodecylbenzene sulfonate with water-soluble polymers

Single and mixed micelle formation by sodium dodecyl sulfate (SDS) and sodium dodecylbenzene sulfonate (SDBS) and their mixtures in pure water and in the presence of water-soluble polymers such as Synperonic 85 (triblock polymer, TBP), hydroxypropylcellulose (HPC), and carboxymethylcellulose sodium salt (CMC) were studied with the help of conductivity, pyrene fluorescence, cyclic voltammetry, and viscosity measurements. Conductivity measurements showed a single aggregation process for pure surfactants and their mixtures both in pure water as well as in the presence of water-soluble polymers. Triple breaks corresponding to two aggregation processes for SDS, SDBS, and their mixture in the presence of TBP were observed from fluorescence measurements. The first one demonstrated the critical aggregation process due to the adsorption of surfactant monomers on TBP macromolecule. The second one was attributed to the participation of surfactant–polymer aggregates formed at the first one, in the micelle formation process. The aggregation number ( N _agg) of single and mixed micelles and diffusion coefficient ( D) of electroactive probe were computed from the fluorescence and cyclic voltammetry measurements, respectively. Both parameters, along with the viscosity results, indicated stronger SDS–polymer interactions in comparison to SDBS–polymer interactions. Mixed surfactant–polymer interactions showed compensating effects of both pure surfactants. The nature of mixed micelles was found to be ideal in all cases, as evaluated by applying the regular solution and Motomura's approximations.     

Gold clusters and nanoparticles in reverse micelles formed by tritons X-100, X-114, and X-45

The formation of gold nanoparticles and clusters in solutions of reverse micelles formed by Tritons X-45, X-114, and X-100 (polyoxyethylene isooctylphenyl ethers with degrees of polymerization n = 5, 7–8 and 9–10, respectively) in the presence of sodium sulfite is studied. The stability of these particles is shown to depend on the length of ethylene oxide chains in surfactant molecules, water content in micelles, and the presence of special additives. It is found that, on one hand, L-ascorbic acid favors a reduction of HAuCl₄ and, on the other hand, affects the stability of resultant particles.     

Interactions of polyelectrolyte brushes with oppositely charged surfactants

Using Brownian dynamics simulations, we study the effect of the charge ratio, the surfactant length, and the grafting density on the conformational behavior of the complex formed by the polyelectrolyte brush with oppositely charged surfactants. In our simulations, the polyelectrolyte chains and surfactants are represented by a coarse-grained bead-spring model, and the solvent is treated implicitly. It is found that varying the charge ratio induces different morphologies of surfactant aggregates adsorbed onto the brush. At high charge ratios, the density profiles of surfactant monomers indicate that surfactant aggregates exhibit a layer-by-layer arrangement. The surfactant length has a strong effect on the adsorption behavior of surfactants. The lengthening of surfactant leads to a collapsed brush configuration, but a reswelling of the brush with further increasing the surfactant length is observed. The collapse of the brush is attributed to the enhancement of surfactants binding to polyelectrolyte chains. The reswelling is due to an increase in the volume of adsorbed surfactant aggregates. At the largest grafting density investigated, enhanced excluded volume interactions limit the adsorption of surfactant within the polyelectrolyte brush. We also find that end monomers in polyelectrolyte chains exhibit a bimodal distribution in cases of large surfactant lengths and high charge ratios.     

Thermal analysis of aqueous micellar solutions

A micro differential temperature scanning calorimeter was used to characterize the structural changes between different types of micelles in aqueous solutions of ionic surfactants: anionic — sodium dodecylsulfate (SDS) — and cationic — hexadecyltrimethyl ammonium bromide (CTAB). Moreover, this technique allowed to confirm the existence of peculiar types of complexes between surfactants and selected solutes. In SDS solutions containing polyethylene glycols (PEG), the presence of complexes formed by small micelles adsorbed along the chains of the polymers was evidenced in the case of long enough polymer chains. In CTAB-phenol solutions, due to strong interactions between the polar heads of surfactant and phenol, molecular complexes of a composition of 1:1 molar ratio have been characterized. Depending on the ratio [phenol]/[CTAB], the rheological behaviour was found to change from fluid to viscoelastic and gel-like solutions, owing to the growth of elongated rod-like micelles. With entangled worm-like micelles, the important role of kinetics to reach the thermodynamic equilibria was shown.     

Interfacial Dilational Properties of Hydrophobically Modified Partly Hydrolyzed Polyacrylamide and Anionic Surfactants at the Water-Decane Interface

The dilational viscoelastic properties of hydrophobically modified partly hydrolyzed polyacrylamide and anionic surfactants (4,5-diheptyl-2-propylbenzene sulfonate and gemini surfactant C₁₂COONa-p-C₉SO₃Na) in the absence or presence of electrolyte have been investigated at the decane–water interface by means of longitudinal method and the interfacial tension relaxation method. Experimental results show that at low surfactant concentration, the increase of the dilational modulus by the addition of surfactant molecules at low frequency might be explained by the mix-adsorption of the polymer chains and surfactant molecules. At the same time, polymer chain could sharply decrease the dilational modulus of surfactant film mainly due to the weakening of the strong interactions among long alkyl chains in surfactant molecules. At high surfactant concentration, the addition of surfactant molecules can decrease the dilational modulus of polymer solution due to the fast process involving in the exchange of surfactant molecules between the interface and the mixed complex formed by surfactant molecules and hydrophobic micro-domains. The added electrolyte, which results in screening of electrostatic interactions between the ionized groups, generally increases the frequency dependence of the interfacial dilational modulus. The data obtained on the relaxation processes via interfacial tension relaxation measurements can explain the results from oscillating barriers measurements very well.     

Interaction of amphiphilic block copolymer micelles with surfactants

An out line and summary of literature studies on interactions between different types of amphiphilic copolymer micelles with surfactants has been given. This field of research is still emerging and it is difficult presently to make generalisations on the effects of surfactants on the copolymer association. The effects are found to be varied depending upon the nature and type of hydrophobic (hp) core and molecular architecture of the copolymers and the hydrocarbon chain length and head group of surfactants. The information available on limited studies shows that both anionic and cationic surfactants (in micellar or molecular form) equally interact strongly with the associated and unassociated forms of copolymers. The beginning of the interaction is typically displayed as critical aggregation concentration (CAC), which lies always below the critical micelle concentration of the respective surfactant. The surfactants first bind to the hydrophobic core of the copolymer micelles followed by their interaction with the hydrophilic (hl) corona parts. The extent of binding highly depends upon the nature, hydropobicity of the copolymer molecules, length of the hydrocarbon tail and nature of the head group of the surfactant. The micellization of poly(ethylene oxide) (PEO)–poly(propylene oxide) (PPO)–poly(ethylene oxide) was found to be suppressed by the added surfactants and at higher surfactant concentrations, the block copolymer micelles get completely demicellized. This effect was manifested itself in the melting of liquid crystalline phases in the high copolymer concentrations. However, no such destabilization was found for the micelles of polystyrene (PS)–poly(ethylene oxide) copolymers in water. On the contrary, the presence of micellar bound surfactant associates resulted in to large super micellar aggregates through induced intra micellar interactions. But with the change in the hydrophobic part from polystyrene to poly(butadiene) (PB) in the copolymer, the added surfactants not only reduced the micellar size but also transformed cylindrical micelles to spherical ones. The mixtures in general exhibited synergistic effects. So varied association responses were noted in the mixed solutions of surfactants and copolymers.     

Fluorometric and isothermal titration calorimetric studies on binding interaction of a telechelic polymer with sodium alkyl sulfates of varying chain length

Steady-state fluorescence measurements and isothermal titration calorimetric experiments have been performed to study the interaction between a telechelic polymer, pyrene-end-capped poly(ethylene oxide) (PYPY), and sodium alkyl sulfate surfactants having decyl, dodecyl, and tetradecyl hydrocarbon tails. Fluorometric results suggest polymer-surfactant interaction in the very low range of polymer concentrations. The relative variation in the excimer to monomer pyrene emission intensities with varying surfactant concentration reveals that initial addition of surfactant favors intramolecular preassociation until the surfactant molecules start binding with the ethylene oxide (EO) chain. With the growing number of surfactant aggregates along the EO chain, the association becomes hindered due to the polyelectrolyte effect. The results from microcalorimetric titrations in the low concentration range of PYPY solution (approximately 10(-6) M) with alkyl sulfates suggest two kinds of surfactant-polymer interactions, one with the polymer hydrophobic end groups and the other with the ethylene oxide backbone. The overall polymer-surfactant interaction starts at a much lower surfactant concentration for the hydrophobically modified polymers compared to that in the case of unsubstituted poly(ethylene oxide) homopolymer. From the experiments critical aggregation concentration values and the second critical concentration where free micelles start forming have been determined. An endeavor has been made to unveil the mechanism underlying the corresponding associations of the surfactants with the polymer.     

Micellar structure in gemini nonionic surfactants from small-angle neutron scattering

The size and shape of micelles formed by dimeric polyoxyethylene (nonionic gemini) surfactants having the structure (Cn-2H2n-3CHCH2(OCH2CH2)mOH)2(CH2)6 with alkyl and ethoxy chain lengths ranging from n = 12-20 and m = 5-30 have been determined using small angle neutron scattering (SANS). The surfactants are polydisperse in the hydrophilic groups but otherwise analogous to the widely studied monomeric poly(oxyethylene) alkanols. We find that longer ethoxylated chains are needed to confer solubility on the gemini surfactants and that these chains in the hydrophilic corona around the alkyl core of the micelles are reasonably well described as a homogeneous random coil in a good solvent. Spherical micelles are formed by the surfactants with the longest ethoxylated chains. Shorter chains lead first to rods and ultimately a vesicle dispersion. These solutions exhibit conventional cloud point behavior, and on warming, a sphere to rod transition can be observed. For the n = 20 and m = 15 surfactant, this shape transition is accompanied by a striking increase in viscosity at low concentration and gelation at higher concentrations.     

Weak interactions at the photoexcited states of partially oriented aromatic chromophores in man-made bilayer membranes

Monoalkyl and dialkyl quarternary ammonium salt-type cationic surfactants containing a phenoxy group as aromatic chromophores at different positions of alkyl chains were synthesized. Monoalkyl-type surfactants formed micelles in aqueous solutions. The bilayer structure similar to that found in phospholipid liposomes was obtained in the aqueous dispersions of dialkyl-type surfactants. The phenoxy groups were partially oriented and aligned in these molecular assemblies. The interactions of aligned phenoxy groups in micelles or bilayers resulted in luminescence with lower energy than that of the monomer fluorescence or in a radiationless deactivation of excited states. Such interactions could be effectively prevented in bilayer structures composed of surfactant molecules containing a “spacer chain” between aligned chromophores. Evidence was obtained supporting energy migrations between aligned chromophores that were separated by a dodecyl chain in the bilayer structure.     

Thermodynamic Study of Poly(ethylene glycol) in Water/1-Propanol Solutions by Viscometry

In this work, the intrinsic viscosities of poly(ethylene glycol) with a molar mass of 20 kg⋅mol⁻¹ were measured in water/1-propanol solutions from 283.1 to 313.1 K. The expansion factors of the polymer chains were calculated from the intrinsic viscosity data. The thermodynamic parameters entropy of dilution parameter, the heat of dilution parameter, theta temperature, polymer–solvent interaction parameter and second osmotic virial coefficient were derived from the temperature dependence of the polymer chain expansion factor. The thermodynamic parameters indicate that mixtures of water/1-propanol become weaker solvents for poly(ethylene glycol) with increasing temperature. Also, the thermodynamic parameters indicate that the solvent ability of mixed water/1-propanol for poly(ethylene glycol) is less than that of pure water.     

Interfacial dilational properties of partly hydrolyzed polyacrylamide and gemini surfactant at the decane–water interface

The dilational viscoelastic properties of partly hydrolyzed polyacrylamide (HPAM) and surfactant (C₁₂COONa-p-C₉SO₃Na) in the absence or presence of electrolyte were investigated at the decane–water interface by means of longitudinal method and the interfacial tension relaxation method. The polymer plays different roles in influencing the structure of HPAM–surfactant mix-adsorbed layer at different surfactant concentration. At low surfactant concentration, the addition of polymer could sharply decrease the dilational elasticity mainly due to the weakening of the “entanglement” among long alkyl chains in surfactant molecules, while the addition of the polymer may enhance the dilational elasticity due to the slow diffusivity of the polymer chains at higher surfactant concentration. And the added electrolyte, which results in screening of electrostatic interactions between the ionized groups, generally decreases the interfacial dilational elasticity and increases the dilational viscosity. The data obtained on the relaxation processes via interfacial tension relaxation measurement can explain the results from dilational viscoelasticity measurements very well.     

Surfactant polymer interactions between strongly interacting cationic surfactants and anionic polyelectrolytes from conductivity and turbidity measurements

The interactions between oppositely charged surfactant/polymer mixtures have been studied using conductivity and turbidity measurements. The dependence of aggregation phenomenon on the chain length and head group modifications of conventional cationic surfactants, i.e., hexadecyl- (HTAB), tetradecyl- (TTAB), and dodecyltrimethylammonium bromides (DTAB) and dimeric cationic surfactants, i.e., decyl- (DeDGB) and dodecyldimethylgemini bromides (DDGB), is investigated. It was observed that cationic surfactants induce cooperative binding with anionic polyelectrolytes at critical aggregation concentration (cac). The cac values are considerably lower than the critical micelle concentration (cmc) values for the same surfactant. After the complete complexation, free micelles are formed at the apparent critical micelle concentration (acmc), which is slightly higher in aqueous polyelectrolyte than in pure water. Among the conventional and dimeric cationic surfactants, DTAB and DeDGB, respectively, have been found to have least interactions with oppositely charged polyelectrolytes.