The mechanism of selective NO<Subscript>x</Subscript> reduction by hydrocarbons in excess oxygen on oxide catalysts: VI. Spectroscopic and kinetic characteristics of surface complexes on a Ni-Cr oxide catalyst

The reaction mechanism of the selective catalytic reduction of NO_x by propane in the presence of O₂ on a commercial Ni-Cr oxide catalyst was studied using in situ IR spectroscopy. It was found that nitrite, nitrate, and acetate surface complexes occurred under reaction conditions. Considerable amounts of hydrogen were formed in the interaction of NO + C₃H₈ + O₂ or C₃H₈ + O₂ reaction mixtures with the catalyst surface. The rates of conversion of the surface complexes detected under reaction conditions were measured. The resulting values were compared to the rate of the process. It was found that, at temperatures lower than 200°C, nitrate complexes reacted with the hydrocarbon to form acetate complexes; in this case, the formation of reaction products was not observed. In the temperature region above 250°C, two reaction paths took place. One of them consisted in the interaction of acetate and nitrate complexes with the formation of reaction products. The decomposition of NO on the reduced surface occurred in the second reaction path. Nitrogen atoms underwent recombination, and oxygen atoms reoxidized the catalyst surface and reacted with the activated hydrocarbon to form CO₂ and H₂O in a gas phase.     

The reactions and composition of the surface intermediate species in the selective catalytic reduction of NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> with ethylene over Co-ZSM-5

A pretreatment-transient reaction product analysis method was applied to study the reactions and average composition of the possible surface intermediate species in selective catalytic reduction with ethylene of NO _x over Co-ZSM-5. The reactions of the surface species, formed by the pretreatment of Co-ZSM-5 in a NO/C₂H₄/O₂ mixture at 275°C, with the NO/O₂ flow produced much more N₂ than that with the individual NO or O₂ flow. The similarity of N₂/CO _x /H₂O product distribution generated from the above surface species-NO/O₂ reactions and that from the normal NO/C₂H₄/O₂ flow reactions implies that the surface species NC _a O _b H _c formed in the three-component pretreatment process is very likely the primary intermediate surface species generated during the real flow reactions. The in situ FT-IR (DRIFT) spectroscopy measurements of the surface species support the above conclusion.     

X-ray photoelectron spectroscopic study of the interaction of supported metal catalysts with NO<Subscript>x</Subscript>

The reactions of the platinum and rhodium model catalysts applied to aluminum oxide with NO_x (10 Torr NO + 10 Torr O₂) were studied by X-ray photoelectron spectroscopy. The reaction conducted at room temperature formed on the surface of the oxide support the NO _3,s ^? nitrate ions characterized by the N1s line at 407.4 eV and O1s line at 533.1 eV and the NO _2,s ^? nitrite ions characterized by the N1s line with a binding energy of 404.7 eV. At the same time, the Pt4f and Rh3d lines of the supported platinum particles are shifted toward higher binding energies by 0.5–1.0 eV and 0.7–1.2 eV, respectively. It is assumed that the binding energies increase due to changes in the chemical state of the platinum metal in which oxygen is dissolved. The reaction of NO_x with Pt/Al₂O₃ at 200°C forms platinum oxide defined by the Pt4f _7/2 line with a binding energy of 72.3 eV.     

Oxygen reduction in acid media by a Ru<Subscript>x</Subscript>Fe<Subscript>y</Subscript>Se<Subscript>z</Subscript>(CO)<Subscript>n</Subscript> cluster catalyst dispersed on a glassy carbon-supported Nafion film

Electrocatalytic oxygen reduction was studied on a Ru_xFe_ySe_z(CO)_n cluster catalyst with Vulcan carbon powder dispersed into a Nafion film coated on a glassy carbon electrode. The synthesis of the electrocatalyst as a mixture of crystallites and amorphous nanoparticles was carried out by refluxing the transition metal carbonyl compounds in an organic solvent. Electrocatalysis by the cluster compound is discussed, based on the results of rotating disc electrode measurements in a 0.5 M H₂SO₄. A Tafel slope of −80.00±4.72 mV dec⁻¹ and an exchange current density of 1.1±0.17×10⁻⁶ mA cm⁻² was calculated from the mass transfer-corrected curve. It was found that the electrochemical reduction reaction follows the kinetics of a multielectronic (n=4e⁻) charge transfer process producing water, i.e. O₂+4H⁺+4e⁻→2H₂O. Electronic Publication     

Formation and characterization of Cu<Subscript>x</Subscript>S layers on polyethylene film using the solutions of sulfur in carbon disulfide

Results of the formation of copper sulfide layers using the solutions of elemental sulfur in carbon disulfide as precursor for sulfurization are presented. Low density polyethylene film can be effectively sulfurized in the solutions of rhombic (α) sulfur in carbon disulfide. The concentration of sulfur in polyethylene increases with the increase of the temperature and concentration of sulfur solution in carbon disulfide and it little depends on the duration of sulfurization. Electrically conductive copper sulfide layers on polyethylene film were formed when sulfurized polyethylene was treated with the solution of copper (II/I) salts. Cu_xS layer with the lowest sheet resistance (11.2 Ω cm⁻²) was formed when sulfurized polyethylene was treated with copper salts solution at 80°C. All samples with formed Cu_xS layers were characterized by X-ray photoelectron spectroscopy. XPS analysis of obtained layers showed that on the layer’s surface and in the etched surface various compounds of copper, sulfur and oxygen are present: Cu₂S, CuS, CuO, S₈, CuSO₄, Cu(OH)₂ and water. The biggest amounts of CuSO₄ and Cu(OH)₂ are present on the layer’s surface. Significantly more copper sulfides are found in the etched layers.     

Spectrokinetic study of the mechanism of NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> reduction with propylene over ZrO<Subscript>2</Subscript> in excess oxygen

It has been demonstrated by quantitative spectrokinetic measurements that, on the surface of zirconia stabilized as a tetragonal phase, the rate-limiting step of the selective catalytic reduction of nitrogen oxides (SCR of NO _x ) with propylene is the interaction of surface nitrates with C₃H₆ yielding organic nitro compounds. It is hypothesized that propylene reacts not with the nitrates themselves but with the activated complex NO₂ ^ads whose structure is intermediate between the structures of the monodentate NO₃ ^? and NO₂ species. Deep C₃H₆ oxidation exerts an adverse effect on the rate of the SCR of NO _x with propylene, and the interaction between O₂ and NO, which yields NO₂ and NO₃ ^? stimulates further nitrogen reduction to N₂. The effect of the reaction between oxygen and O₂N?C _n H _m on the NO _x reduction rate is variable and is determined by the C₃H₆/NO _x ratio. A generalized scheme of the SCR of NO _x with propylene on the surface of ZrO₂ partially stabilized as a tetragonal phase has been developed by comparing experimental data of this study and data available from the literature.     

Formation and properties of the Fe<Subscript>8</Subscript>V<Subscript>10</Subscript>W<Subscript>16–x</Subscript>Mo<Subscript>x</Subscript>O<Subscript>85</Subscript> type solid solution

Solid solution phases of a formula Fe₈V₁₀W_16–xMo_xO₈₅ where 0≤x≤4, have been obtained, possessing a structure of the compound Fe₈V₁₀W₁₆O₈₅. It was found on the base of XRD and DTA investigations that these solution phases melted incongruently, with increasing the value of x, in the temperature range from 1108 (x=0) to 1083 K (x=4) depositing Fe₂WO₆ and WO₃. The increase of the Mo⁶⁺ ions content in the crystal lattice of Fe₈V₁₀W₁₆O₈₅ causes the lattice parameters a=b contraction with cbeing almost constant. IR spectra of the Fe₈V₁₀W_16–xMo_xO₈₅ solid solution phases have been recorded.     

Heterogenous catalysis in fine chemistry: the Heck reaction on Pd/SiO<Subscript>2</Subscript> catalysts

The preparation conditions to obtain a Pd/SiO₂ catalyst effective in the Heck reaction between para-substituted halogenobenzene and alkylacrylate have been studied. The impregnation of SiO₂, functionalised with a thiourea derivative, with a Pd(CH₃COO)₂ solution resulted in an active, but unstable catalyst. The catalyst became stable after calcination, but its activity appeared to be strongly dependent on the calcination temperature. IR spectra of adsorbed CO indicated that such a dependence should result from differences in the surface structure of the supported particles.     

Studies on the calcium poisoning and regeneration of commercial De-NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> SCR catalyst

The poisoning effect of calcium on a commercial De-NO _x SCR catalyst (V₂O₅–WO₃/TiO₂) and the regeneration process of deactivated catalysts via water or H₂SO₄ washing were investigated under simulated condition in laboratory. The physicochemical properties of the catalysts were characterized by SEM–EDX, XRD, BET, TPD and FT-IR measurements, and the deactivation mechanism was discussed. The poisoning of calcium was attributed to the coverage of active sites and the reduction of acid sites on the surface of catalyst. The change of V=O bonds on catalyst surface was an important reason, which plays a significant role in the catalytic cycle of SCR. Due to the suction deliquescence of CaO to Ca(OH)₂, the catalytic activity of deactivated catalyst can be finitely recovered by water washing. Besides, as the result of the re-exposure of active sites by washing CaO off and the promotional effect of surface sulfation, the process of regeneration via sulfuric acid washing has a favorable effect in the experiment.     

Simultaneous removal of NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> and SO<Subscript>2</Subscript> by low-temperature selective catalytic reduction over modified activated carbon catalysts

A series of modified porous activated carbon (AC) catalysts prepared by impregnation were investigated for the low-temperature (≤250°C) selective catalytic reduction (SCR) of NO _x with NH₃ with simultaneous removal of SO₂. The effects of various preparation conditions and reaction conditions on NO and SO₂ conversions were observed, such as support type, active components, copper loading, calcination temperature and presence of H₂O and O₂. The modified AC catalysts were characterized by BET, XRD, TG and TPX methods. The activity test results showed that the optimal catalyst is 15% Cu/WCSAC which can provide 52% NO conversion and 68% SO₂ conversion simultaneously at 175°C with a space velocity of 30000 h^?1, and the optimal calcination temperature was 500°C. The presence of H₂O could inhibit NO conversion and promote the SO₂ conversion. The effect of O₂ (0–5%) was evaluated, and the NO and SO₂ conversions were best when the concentration of O₂ was 3%. Research demonstrated that Cu/WCSAC catalyst was a kind of potential catalysts due to the amorphous phase, high specific areas and high active ability.     

Thermo-programmed reduction study of Pt/WO<Subscript>x</Subscript>–ZrO<Subscript>2</Subscript> materials by thermogravimetry

The thermo-programmed reduction study of Pt/WO_x–ZrO₂ materials prepared with different tungsten loading were performed by thermogravimetry. The samples were synthesized by impregnation method and calcined at 600, 700 and 800°C. The characterizations of both un-calcined and calcined materials were carried out using different techniques: thermal analysis (TG and DTA), X-ray diffraction (XRD) and thermo-programmed reduction (TPR). TG and DTA analysis of un-calcined were used to determination of calcination temperatures of the samples. XRD diffractograms were useful to help us in the determination of phase presents. TPR profiles showed between three and four events at different temperatures attributed to platinum reduction and the different stages of tungsten specie reduction.     

Transformations of C<Subscript>2</Subscript>-C<Subscript>4</Subscript> alcohols on the surface of a copper catalyst

The interaction of monoatomic alcohols C₂-C₄ with the surface of a copper catalyst preliminarily oxidized under various conditions was studied by the temperature-programmed reaction method to determine the detailed mechanism of partial oxidation. The conditions of oxygen preadsorption on the surface of copper for the preparation of the desired products were determined. The selective formation of carbonyl compounds was shown to occur at the boundary between reduced and oxidized copper surface regions. The role played by Cu₂O was the deep oxidation of alcohols to CO₂. Alcohols with branched hydrocarbon structures experienced parallel partial oxidation and dehydrogenation, which was related to the high stability of intermediate keto-type compounds.     

Activation of methanol-tolerant carbon-supported RuSe<Subscript>x</Subscript> electrocatalytic nanoparticles towards more efficient oxygen reduction

An electrocatalytic system that utilizes tungsten oxide modified carbon-supported RuSe_x nanoparticles is developed and characterized here using transmission electron microscopy and such electrochemical diagnostic techniques as cyclic voltammetry and rotating ring-disk voltammetry, as well as upon its introduction (as cathode) to the low-temperature hydrogen–oxygen fuel cell. After the modification of RuSe_x catalytic centers with ultra-thin films of WO₃, the potential of oxygen reduction in 0.5 mol dm⁻³ H₂SO₄ (in the absence and presence of methanol) is shifted ca. 70 mV (under rotating disk voltammetric conditions) towards more positive values, and the percent formation (at ring) of the undesirable hydrogen peroxide has decreased approximately twice when compared to the WO₃-free system. Relative to bare electrocatalyst, an increase of power density from 75 to 100 mW cm⁻² (at 300 mA cm⁻²) has been observed upon utilization of WO₃-modified RuSe_x in polymer electrolyte membrane fuel cell at 80 °C. In comparison to Vulcan-supported Pt nanoparticles, the overall electrocatalytic performance of tungsten oxide modified carbon-supported RuSe_x nanoparticles is lower, but the latter system is practically insensitive to the presence of methanol even at 0.5 mol dm⁻³ level. Dedicated to Professor Dr. Algirdas Vaskelis on the occassion of his 70th birthday.     

Interaction between NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> and the surface of supported heteropoly compounds: In situ IR spectroscopic data

The mechanism of activation of nitrogen oxides on unsupported heteropoly compounds and the composition, location, stability, and interconversion mechanisms of adsorption complexes on supported heteropoly compounds have been investigated by in situ IR spectroscopy under thermal desorption conditions. Supporting a small amount of a heteropoly compounds (1% or below) increases NO _x adsorption relative to the adsorption observed for the pure support. This effect is most pronounced for CeO₂ and least pronounced for ZrO₂. The increase in NO _x adsorption is due to NO oxidation to NO₂ on the supported heteropoly compound. The main adsorption species are nitrite and nitrate complexes, which are located on the support. As the temperature is raised, the nitrite complexes turn into the nitrate complexes. The presence of variable-valence ions in the Keggin anion reduces the nitrate complex-surface binding strength. The ions that are not components of the Keggin anion increase the binding strength. The changes in the nitrate complex-support surface binding strength are due to the support modification taking place via the destruction of part of the supported heteropoly compound.     

Review of Ag/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Reductant System in the Selective Catalytic Reduction of NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>

Ag/Al₂O₃ is a promising catalyst for the selective catalytic reduction (SCR) by hydrocarbons (HC) of NO _x in both laboratory and diesel engine bench tests. New developments of the HC-SCR of NO _x over a Ag/Al₂O₃ catalyst are reviewed, including the efficiencies and sulfur tolerances of different Ag/Al₂O₃-reductant systems for the SCR of NO _x ; the low-temperature activity improvement of H₂-assisted HC-SCR of NO _x over Ag/Al₂O₃; and the application of a Ag/Al₂O₃-ethanol SCR system with a heavy-duty diesel engine. The discussions are focused on the reaction mechanisms of different Ag/Al₂O₃-reductant systems and H₂-assisted HC-SCR of NO _x over Ag/Al₂O₃. A SO₂-resistant surface structure in situ synthesized on Ag/Al₂O₃ by using ethanol as a reductant is proposed based on the study of the sulfate formation. These results provide new insight into the design of a high-efficiency NO _x reduction system. The diesel engine bench test results showed that a Ag/Al₂O₃-ethanol system is promising for catalytic cleaning of NO _x in diesel exhaust.     

On the properties of surface complexes formed upon the adsorption of NO<Subscript>x</Subscript>, C<Subscript>3</Subscript>H<Subscript>6</Subscript>, and their mixtures with oxygen on ZrO<Subscript>2</Subscript> according to EPR,TPD, and fourier transform IR spectroscopy data

The adsorption of reactant mixtures is quantitatively and qualitatively different from the adsorption of the individual reactants. Thus, O₂ is almost not adsorbed on ZrO₂; however, a considerable concentration of molecular oxygen was detected among the products of desorption after the adsorption of a mixture of NO + O₂ and the total amount of desorbed molecules was greater by a factor of 10 than their total amount after the individual adsorption of NO and O₂. Among the qualitative differences is the formation of the O₂^- radical anion on the surface only upon the adsorption of the mixture of NO + O₂. Similarly, the number of desorbed molecules upon the simultaneous adsorption of C₃H₆, NO, and O₂ was much greater than that upon their individual adsorption; this is related to the formation of paramagnetic and nonparamagnetic NO₂–hydrocarbon complexes on the surface, which contained the NO₂ group and a hydrocarbon fragment.     

Oxidative dehydrogenation of propane on the VO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/CeZrO/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> supported catalyst

The oxidative dehydrogenation of propane on a supported vanadium catalyst was studied (the support was a complex oxide system consisting of a ceria–zirconia solid solution deposited on γ-Al₂O₃ (CeZrO/γ-Al₂O₃)). A comparative analysis of the properties of the support and the catalyst prepared on its basis was performed. The support and catalyst were characterized by the BET method, scanning electron microscopy, X-ray diffraction analysis, and Raman spectroscopy. The catalytic properties of the catalyst and support were studied in propane oxidation at 450 and 500°C with pulse feeding of the reagent. The effect of propane on the support was found to improve the oxidative properties of the latter. This behavior of the support is related to the preparation procedure, which leads to the formation on its surface of the crystalline phase of the ceria–zirconia solid solution and amorphous ZrO₂ and Al₂O₃ phases and/or their solid solution. Similar processes occur with the catalyst support during the oxidative dehydrogenation, giving rise to additional active centers (CeVO₄).