Catalytic Activity of the Oxide Catalysts Based on Ni<Subscript>0.75</Subscript>Co<Subscript>2.25</Subscript>O<Subscript>4</Subscript> Modified with Cesium Cations in a Reaction of N<Subscript>2</Subscript>O Decomposition

The Ni_0.75Co_2.25O₄ catalysts were prepared by a coprecipitation method and modified with cesium cations by impregnation with a solution of cesium nitrate or cesium nitrate with citric acid and ethylene glycol additives (the Pechini method). The catalysts obtained were investigated by X-ray diffraction analysis, the BET method, X-ray photoelectron spectroscopy, temperature-programmed reduction, and the temperatureprogrammed desorption of oxygen. The activity of the samples in a reaction of nitrous oxide decomposition was determined at temperatures of 200–300°C, in particular, in the presence of oxygen and water in the reaction mixture. It was found that the use of the Pechini method for supporting Cs makes it possible to obtain a more active catalyst, as compared with that prepared by impregnation with cesium nitrate, at the same cesium content (~2%) of the samples.     

Modeling the active centers of V<Subscript>2</Subscript>O<Subscript>5</Subscript>/SiO<Subscript>2</Subscript> and V<Subscript>2</Subscript>O<Subscript>5</Subscript>/TiO<Subscript>2</Subscript> supported catalysts. DFT theoretical analysis of optical properties

Within the framework of the density functional theory (DFT), the electronic structure of monooxodioxovanadium functional groups in tetrahedral coordination, which model the active centers (ACs) of fine supported catalysts V₂O₅/SiO₂ and V₂O₅/TiO₂, has been analyzed. The optimal structures of three ACs as possible models of monomeric and polymeric oxovanadium forms on the carriers with low vanadium content were determined. The modified DFT method involving the time dependence of Kohn-Sham equation (TDDFT) was used for the adopted AC models to calculate the energies of the excited states, and optical spectra of the absorption in 25000–60000 cm^?1 region were reconstructed on their base. The spectrum in this region is due to O → V charge transfer. The features of electronic spectra with the charge transfer for V₂O₅/SiO₂ and V₂O₅/TiO₂ catalysts and the vibrational spectra of three AC models corresponding to the monomeric and dimeric oxovanadium forms of the supported catalysts V₂O₅/SiO₂ and V₂O₅/TiO₂ were defined. The detailed interpretation of normal vibration frequencies is given. The frequencies typical of the monomeric and dimeric oxovanadium forms on the carrier surface were identified.     

Investigation of the Preyssler phosphotungstate heteropolyanion, [NaP5W30O110]14−, properties with different counter ions

Preyssler heteropolytungstophosphate anions with different counter ions, X _x M _y [NaP₅W₃₀O₁₁₀], where X = H and M = Cs, Ba, La, Ce, Hg, Tl, Pb and Bi, were prepared and the effect of the counter ion on their behavior was investigated by i.r. spectroscopy, surface area measurements (BET), simultaneous thermal analysis (STA), cyclic voltammetry and X-ray photoelectron spectroscopy (XPS). Thermal analyses indicate that the Ce derivative has the highest and the Hg derivative the lowest thermal stability. Only the Cs, Ba and Tl salts show measurable surface area. All heteropolyanions with similar i.r. spectra and electrochemical behavior demonstrate that the heteropolyanion structures are retained. The X-ray photoelectron spectra of the heteropolyacid salts reveal high binding energies for counter ions in comparison with classic salts and strong interaction of counter ion with the oxo oxygen's for H⁺ and Cs⁺ derivatives.     

FePO<Subscript>4</Subscript>/SiO<Subscript>2</Subscript> Catalysts for Propylene Glycol Oxidation

FePО₄/SiO₂ supported catalysts with a different content of iron phosphate are prepared. The properties of the catalyst are changed by the introduction of alkali metal compounds (Na or Cs) on its surface. The samples obtained are characterized by X-ray diffraction, low-temperature nitrogen adsorption, temperatureprogrammed reduction by hydrogen, and temperature-programmed desorption of ammonia. The catalytic properties are investigated in the reaction of gas-phase propylene glycol oxidation. It is shown that the selectivity of methylglyoxal formation on the unmodified catalysts is determined by the state of the supported active component and by its reduction–oxidation ability under the action of a reaction mixture.     

Investigation of thermally stimulated charge relaxation mechanism in SiO<Subscript>2</Subscript> filled polycarbonate nanocomposites

The thermally stimulated charge relaxation properties of polycarbonate (PC) filled with SiO₂ nanofiller were studied by means of thermally stimulated discharge current (TSDC). The nanocomposite samples were further characterized by UV–vis spectroscopy, scanning electron microscopy, energy dispersive X-ray spectra, and differential scanning calorimetry (DSC) techniques to investigate the dispersion of nanofillers in polymer matrix and glass transition temperature. All pristine and nanocomposites samples of thickness about 25 μm were prepared using solution mixing method. The suitable weight percentage of SiO₂ nanofillers has been chosen to prevent the nonuniform dispersion. TSDC measurement of PC (Pristine) and PC+ (7% SiO₂) shows the single peak, while TSDC characteristic of other nanocomposites are showing two peaks. The higher temperature TSDC peak of pristine and nanocomposites samples is originated due to the charge relaxation from shallower and deeper trapping sites, however, low temperature peak is caused by dipolar relaxation of charge carriers. Since the position of higher temperature TSDC peak is generally an analysis of glass transition temperature of polymer/polymer nanocomposites. The authors have observed that the temperature of this peak is almost same as the T _g measured by DSC with 0 to ±5% variation. This article presents the deeper understanding of charge relaxation mechanism caused by SiO₂ nanofillers in polycarbonate.     

Effect of the Support on the Nature of Metal-Promoter Interactions in Ru-Cs<Superscript>+</Superscript>/MgO and Ru-Cs<Superscript>+</Superscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts for Ammonia Synthesis

The Ru-Cs⁺/MgO and Ru-Cs⁺/γ-Al₂O₃ catalysts, which were prepared by an impregnation method using RuOHCl₃ and Cs₂CO₃ as precursor compounds and reduced with H₂ at 450°C, are characterized by X-ray diffraction, high-resolution transmission electron microscopy (with X-ray microanalysis), and X-ray photoelectron spectroscopy (XPS). The Cs⁺/MgO(Al₂O₃) systems, Ru-Cs⁺ black, and model systems prepared by cesium sputtering onto polycrystalline ruthenium foil are studied as reference samples. It is found that, in the Ru-Cs⁺/MgO sample, cesium is present as a Cs_{2 + x}O cesium suboxide, which weakly interacts with the support, localized on the surface of Ru particles or near them. In the case of Ru-Cs⁺/γ-Al₂O₃, cesium occurs as a species that is tightly bound to the support; this is likely surface cesium aluminate, which prevents promoter migration to Ru particles. The Ru-Cs⁺/MgO sample exhibits a considerable shift of the Ru3d line in the XPS spectra toward lower binding energies, as compared to the bulk metal. It is hypothesized that this shift is due to a decrease in the electron work function from the surface of ruthenium because of the polarizing effect of Cs⁺ ions in contact with Ru particles. Based on the experimental results, the great difference between the catalytic activities of the Ru-Cs⁺/MgO and Ru-Cs⁺/γ-Al₂O₃ systems in ammonia synthesis at 250–400°C and atmospheric pressure is explained.     

Simultaneous SIMS/AES Measurements for the Characterization of Multilayer Systems

The interface region of silicon dioxide layers deposited on indium phosphide was investigated by simultaneous secondary ion mass spectroscopy (SIMS) and Auger electron spectroscopy (AES) depth profile measurements. The results of such measurements depend strongly on the ion species used for sputtering. With Ar⁺ primary ions an enhancement of the P- and In-SIMS signals occurs in the mixing zone at the interface. This effect can be explained by an increase of the ionization yield of In and P in the presence of oxygen from the SiO₂. The use of O₂ ⁺ as sputter ions enlarges the phosphorus peak at the interface while the enhancement of the In-signal diminishes. The simultaneously measured AES spectra give clear evidence of oxygen bonded In and P at the interface. Additionally, preferential sputtering of phosphorus occurs. The understanding of these effects which complicate the interpretation of SIMS and AES depth profile measurements of the system SiO₂/InP allows us to investigate the silicon dioxide layers and the interface region in order to optimize the SiO₂ deposition process, e.g. for surface passivation or MIS structures.     

Catalytic efficiency of cesium and potassium salts of dodecatungstophosphoric acid supported on silica and comparison with H<Subscript>3</Subscript>PW<Subscript>12</Subscript>O<Subscript>40</Subscript>/SiO<Subscript>2</Subscript>

Pure tungstophosphoric acid, potassium tungstophosphate, and cesium tungstophosphate with varying extent of substitution of protons by Cs or K ions x (x = 1, 2, 2.5, and 3) have been prepared and are supported on silica by the wet impregnation method. The extent of loading was fixed at 20 wt %. For the sake of comparison, unloaded Cs _x and K _x (x = 1) salts of tungstophosphoric acid were prepared by the precipitation method. The supported catalysts were characterized by FT-IR, XRD, specific surface area measurements, and catalytic conversion of tert-butanol. The results revealed that the catalytic conversion of tert-butanol proceeds mainly via dehydration yielding isobutene. The Cs₁PW/SiO₂, HPW/SiO₂, and K₁PW/SiO₂ catalysts were more active than their unsupported samples. The previous solids showed greater catalytic activity and stability. Unexpectedly, substitution of one proton of tungstophosphoric acid by a cesium or potassium ion exerted no measurable effect on the catalytic activity of the treated solids, in spite of decreasing the Brønsted acidity of Cs₁PW/SiO₂ and K₁PW/SiO₂ indicating that the acidity of HPW/SiO₂ decrease may be due to the interaction between HPW and the SiO₂ surface. On the other hand, significant decrease in the catalytic activity took place upon increasing the cation content (x) to x = 2, 2.5, and 3.     

Nanosized TiO<Subscript>2</Subscript> particles decorated on SiO<Subscript>2</Subscript> spheres (TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript>): synthesis and photocatalytic activities

Nanosized TiO₂ and nano-anatase TiO₂ decorated on SiO₂ spherical core shells were synthesized by using a sol–gel method. The synthesized pure TiO₂ nano particle and TiO₂ grafted on SiO₂ sphere with various ratios have been characterized for their structure and morphologies by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectrophotometry (FTIR) and transmission electron microscopy (TEM). Their surface areas were measured using the BET method. The photocatalytic activity of all nanocomposites was investigated using methylene blue as a model pollutant. The synthesized TiO₂/SiO₂ particles appeared to be more efficient in the degradation of methylene blue pollutant, as compared to pure TiO₂ particles.     

Fabrication,characterization, and photocatalytic performance of TiO<Subscript>2</Subscript> hybridized with SiO<Subscript>2</Subscript>

Nanostructures TiO₂–SiO₂ photocatalysts were successfully synthesized using the sol-gel method, hydro-calcination, co-precipitation and room-temperature solid-phase synthesis technology. X-ray powder diffraction pattern (XRD), Fourier transform infrared spectrum (FTIR), photoluminescence (PL) spectra, thermal analyses (TG–DTA), scanning electron micrographs (SEM), X-ray photoelectron spectroscopy (XPS), and UV-Vis diffuse reflectance spectroscopy (UV-Vis DRS) were used to characterize the as-synthesized catalysts. Photocatalytic performances of the catalysts were evaluated by the degradation of methyl orange (MO) under s imulated natural light and the degradation rate of MO is 97.2%. The composites showed a good stability: after five recycling runs there are no significant decreases in the photocatalytic activity. The photodegradation of methylene blue, rhodamine B, methyl violet, naphthol green B, basic fuchsin, malachite green, and methyl red were also tested, and the degradation rate of dyes could reach over 94.2 %. A possible mechanism for the photocatalysis with the TiO₂–SiO₂ was proposed.     

Effect of PEG with different <Emphasis Type="Italic">M</Emphasis><Subscript>W</Subscript> as template direction reagent on preparation of porous TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> with assistance of supercritical CO<Subscript>2</Subscript>

Titania–silica composite have been prepared using polyethylene glycol (PEG) with different molecular weights (M _w), PEG20000, PEG10000, and PEG2000, as template in supercritical carbon dioxide (SC CO₂). The composite precursors were dissolved in SC CO₂ and impregnated into PEG templates using SC CO₂ as swelling agent and carrier. After removing the template by calcination at suitable temperature, the titania–silica composite were obtained. The composite were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and nitrogen sorption–desorption experiment. Photocatalytic activity of the samples has been investigated by photodegradation of methyl orange. Results indicate that there are many Si–O–Ti linkages in the TiO₂/SiO₂ composite; the PEG template has a significant influence on the structure of TiO₂/SiO₂. In addition, the TiO₂/SiO₂ prepared with PEG10000 exhibited high photocatalytic efficiency. So this work supplies a clue to control and obtain the TiO₂/SiO₂ composite with different photocatalytic reactivity with the aid of suitable PEG template in supercritical CO₂.     

Photocatalytic degradation of organic compounds in aqueous systems by Fe and Ho codoped TiO<Subscript>2</Subscript>

Undoped, single-doped, and codoped TiO₂ nanoparticles were prepared by the sol-gel method and characterized with X-ray diffraction (XRD), the Brunauer-Emmett-Teller (BET)-specific surface area (S_BET), UV-Vis absorption spectra (UV-Vis), and X-ray photoelectron spectroscopy (XPS). Their photocatalytic activity was evaluated by methyl orange (MO) degradation in an aqueous suspension under UV or simulated solar light illumination. XRD showed that all samples calcined at 600°C preserved the anatase structure, and doping inhibited the increase of crystallite size. The BET result revealed that doping improved the surface area of TiO₂. UV-Vis indicated that Fe³⁺-doping broadened the absorption profile of TiO₂. XPS demonstrated that doping was advantageous to absorb more surface hydroxyl groups or chemisorbed water molecules. Photocatalytic degradation showed that the photocatalytic activity of TiO₂ codoped with Fe³⁺ and Ho³⁺ ions was markedly improved. This was ascribed to the fact that there was a cooperative action in the two doped elements. Fe³⁺-doping broadens the absorption profile, improves photo utilization of TiO₂, and then generates more electronhole pairs. Ho³⁺-doping restrains the increase in grain size and retards the recombination of photo-generated electrons and holes.     

XPS- and AES-investigations of electron and ion beam induced effects on SK16 glass surfaces

Summary Electron beam induced effects in the near surface region of SK16 glass samples (44% SiO₂, 25% B₂O₃, 28% BaO, 3% other) have been studied using Auger electron spectroscopy (AES) with 3 keV primary electrons at different current densities (4.7 mAcm^–2–75 mAcm^–2). It was found that the SiO₂ and B₂O₃ constituents dissociate during electron bombardment to form binding structures which are characteristic for elemental Si and B, respectively. To investigate the influence of the ion beam irradiation on the binding structure, the glass samples were bombarded with Ar⁺ ions of different kinetic energies (0.5 keV–5 keV), followed by XPS analysis. In comparison to the XPS signal of a virgin SK16 surface from a sample fractured in situ under UHV conditions, the FWHM of the photoelectron peaks were found to increase with the bombarding ion energy. Subsequent Auger spectra revealed that the ion bombardment also caused a dissociation of the SiO₂ and B₂O₃ components. Depending on the ion energy, a constant ratio between elemental and oxidized binding form is obtained.     

Moderate-temperature protonic conductors based on CsH<Subscript>2</Subscript>PO<Subscript>4</Subscript> and modified silicon dioxide

With the aim of creating an inert matrix for composite in the (1 ? x) CsH₂PO₄ ? xSiO₂ system, the surface of finely divided dioxide is modified and matrices with more acid centers are produced. Physicochemical properties of composite systems on the basis of these are studied. The role played by acid centers in the formation of more stable and better conductive composite systems in the temperature interval 150 to 250°C is demonstrated. The conductivity of composites based on silicon dioxide modified with CsHSO₄ or H₃PO₄ at 130–230°C is shown to exceed that of the initial phase CsH₂PO₄ and the composite systems based on uniformly porous silicon dioxide with the surface acidity pH ～7 studied previously. The composites are of interest for further research. Compositions of phases under formation and conditions for their existence are determined.     

N,B, Si-tridoped mesoporous TiO<Subscript>2</Subscript> with high surface area and excellent visible-light photocatalytic activity

N, B, Si-tridoped mesoporous TiO₂, together with N-doped, N, B-codoped and N, Si-codoped TiO₂, was prepared by a modified sol–gel method. The samples were characterized by wide-angle X-ray diffraction (WAXRD), N₂ adsorption–desorption, transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, UV–visible adsorbance spectra (UV–vis) and X-ray photoelectron spectra (XPS). The N, B, Si-tridoped mesoporous TiO₂ showed small crystallite size, large specific surface area (350 m²/g), uniform pore distribution (3.2 nm) and strong absorption in the visible light region. The photocatalytic activities of the samples were evaluated by the photodegradation of 2,4-dichlorophenol (2,4-DCP) aqueous solution. The N, B, Si-tridoping sample exhibited much higher photocatalytic activity compared with other synthesized photocatalysts. The high activity could be attributed to the strong absorption in the visible light region, large specific surface area, small crystallite size, large amount of surface hydroxyl groups, and mesoporosity.     

The state of nickel in the silver modified NiMg/SiO<Subscript>2</Subscript> vegetable oil hydrogenation catalysts

Two series of silver modified Ni-Mg materials were synthesized by precipitation-deposition on SiO₂ support derived from two silica sources: diatomite activated at 800°C (Series a; Mg/Ni = 0.1 and SiO₂/Ni = 1.07) and synthetic water glass (Series b; Mg/Ni = 0.1 and SiO₂/Ni = 1.15). The modification with silver was made at three molar Ag/Ni ratios, namely 0.0025, 0.025, and 0.1. The effects of the source of the silica support and the silver presence and content on the nickel state in the silver modified reduced-passivated NiMg/SiO₂ precursors of the vegetable oil hydrogenation catalyst were established by X-ray diffraction and X-ray photoelectron spectroscopy techniques. The passivation procedure was applied in order to protect the metallic nickel particles from further oxidation. The crystallization of the formed nickel hydrosilicate phases depends on the source of the silica support, more expressed in the diatomite supported samples. It was shown that the silver modification of the NiMg/SiO₂ precursors enhances the reduction of the nickel hydrosilicates accompanied by formation of relatively smaller metallic nickel particles, more pronounced in the water glass supported precursors. The increase of the silver content in the water glass deposited samples is responsible for the metallic nickel dispersion increase. The higher content of the Ni⁰ particles on the surface of the diatomite deposited samples is in accordance with the higher stability of the larger metallic nickel crystallites to oxidation during the passivation step. On contrary, higher dispersed Ni⁰ particles on the surface of the water glass supported samples are more susceptible to the oxida The article is published in the original.     

Solid State Radical Recombination and Charge Transfer across the Boundary between Indomethacin and Silica under Mechanical Stress

A composite of indomethacin (IM) and SiO₂ was prepared in a solid state by cogrinding. Dehydration was observed as a consequence of a chemical reaction between silanol groups of SiO₂ and carboxyl groups of IM. Several specific radical species found on separately ground SiO₂ disappeared preferentially after cogrinding as a result of their recombination. These chemical interactions under mechanical stress bring about a charge transfer, as confirmed by X-ray photoelectron spectroscopy, leading to Si-O-C bridging bond formation at the IM/SiO₂ interface.     

Polymer Technology of Porous SiC Ceramics Using Milled SiO<Subscript>2</Subscript> Fibers

The paper describes a developed polymer composition and a process for manufacturing highporous chemically pure silicon carbide ceramics from this composition, using milled industrial wastes of quartz fiber non-woven fabrics as the source of silicon dioxide, which is important as a rational utilization of these wastes. The necessity of pre-milling of the SiO₂ fibers was experimentally substantiated. Without this stage, the duration of treatment at 1400°C under dynamic vacuum considerably (≥12 h) increased, because of the non-uniform distribution of the components in the polymer composite. In the case of stoichiometric ratio of SiO₂ and carbon formed upon pyrolysis of the polymeric phenol binder, the obtained SiC ceramic contained a large amount of unreacted carbon. This indicaties that side reactions take place to give volatile silicon monoxide, which is distilled off from the reactor. The effects of the milling time of SiO₂ fibers and the carbothermal reduction temperature on the elemental and phase composition, density, and porosity of the obtained samples and the ultimate compressive strength were studied. Analysis of the experimental results served for optimization of the composition of the initial polymer composites. As a result, highly porous (83%) and relatively strong (ultimate compressive strength of 8.2MPa) SiC-ceramic samples free from unreacted carbon and silicon dioxide and other stubborn impurities were fabricated at 1400°C (dynamic vacuum, heat treatment for 4 h).     

Polymorphic Mn/W/Na(K,Rb,Cs)/SiO<Subscript>2</Subscript> catalysts for oxidative coupling of methane

The phase composition of Mn/W/Na(K,Rb,Cs)/SiO₂ composites-catalysts was determined by X-ray diffraction. Polymorphic transformations involving tridymite (a SiO₂-based nonstoichiometric crystalline phase) were shown to be a reason for the high catalytic activity of Mn/W/Na(K,Rb,Cs)/SiO₂ in heterogeneous oxidative coupling of methane.     

X-ray photoelectron spectroscopic study of the interaction of supported metal catalysts with NO<Subscript>x</Subscript>

The reactions of the platinum and rhodium model catalysts applied to aluminum oxide with NO_x (10 Torr NO + 10 Torr O₂) were studied by X-ray photoelectron spectroscopy. The reaction conducted at room temperature formed on the surface of the oxide support the NO _3,s ^? nitrate ions characterized by the N1s line at 407.4 eV and O1s line at 533.1 eV and the NO _2,s ^? nitrite ions characterized by the N1s line with a binding energy of 404.7 eV. At the same time, the Pt4f and Rh3d lines of the supported platinum particles are shifted toward higher binding energies by 0.5–1.0 eV and 0.7–1.2 eV, respectively. It is assumed that the binding energies increase due to changes in the chemical state of the platinum metal in which oxygen is dissolved. The reaction of NO_x with Pt/Al₂O₃ at 200°C forms platinum oxide defined by the Pt4f _7/2 line with a binding energy of 72.3 eV.