Conformationally Selective Synthesis of Mononitrocalix[4]arene in Cone or Partial Cone

Nitro‐substituted calixarenes in a cone and a partial cone conformation were prepared selectively using distinct synthetic routes. The selective nitration of tris‐ or penta‐substituted phenols of calix[4]arene or calix[6]arene provided mononitrocalix[n ]arenes (n  =  4, 6). Subsequent addition of ethylene glycol (EG) moieties to mononitrocalix[4]arene provided tetraEGylcalix[4]arene in locked partial cone conformation. By an alternative route – initial addition of EG moieties to the non‐derivatized calix[4]arene followed by the uncontrolled nitration – provided mononitro‐ and dinitro‐tetraEGylcalix[4]arenes locked in the cone conformation. These nitrocalix[4]arenes with locked cone or partial cone conformation are useful building blocks for further assembly of supramolecular systems, especially in the area of material sciences.     

Synthesis and Properties of Upper Rim Schiff Base Calix[4]arenes

The synthesis and properties of upperrim Schiff base calix[4]arenes are described in thisarticle. Tetrakis-p-bromomethylcalix[4]arene(1) reacts with hexamethylenetetramine to givetetrakis-p-formylcalix[4]arene (2) in highyield. Then upper rim Schiff base calix[4]arenes 3 can be easily synthesized by 2 reacting withappropriate alkylamines. The complexation ability of3 toward transition metals Pb²⁺, Cu²⁺and Co²⁺ was studied by UV-VIS spectrophotometry.     

Synthesis of New Calix[4]arenes Functionalizated by Acetylhydrazide Groups

A series of new calix[4]phenols, calix[4]resorcinols and calix[4]pyrogallols with acetylhydrazide substitutes has been␣synthesized with high yields by hydrazinolysis of ester group containing calix[4]arenes. The synthesized calix[4]phenols adopt the cone conformation while the calix[4]resorcinol and calix[4]pyrogallol derivatives prefer the boat conformation. The amide fragment of the hydrazide groups predominantly exists in the trans-conformation. The binding ability of synthesized calix[4]arenes toward transition and alkali metals by solvent extraction has been investigated.     

Shaping the cavity of calixarene architecture for molecular recognition: synthesis and conformational properties of new azocalix[4]arenes

A series of new azocalix[4]arenes containing one, two, three, and four free phenolic groups have been synthesized through the reaction of 4-nitro- and 2,4-dinitrophenylhydrazines with flexible calix[4]arene diquinones as well as through diazocoupling reactions of calix[4]arenes. Characterization of synthesized compounds by spectroscopic methods and X-ray diffraction revealed that azocalix[4]arenes adopt a cone conformation if they contain at least one free phenolic group. Partial cone or 1,3-alternate conformers of azocalix[4]arenes result only when they are devoid of free phenolic groups. The results can be utilized to shape calix[4]arene architecture for ionic and molecular recognition.     

杯芳烃与NO2硝化反应的研究

系统地研究了羟基杯[n]芳烃、甲氧基杯[n]芳烃和对特丁基杯[n]芳烃(n＝4, 6, 8)与NO₂气体的硝化反应, 发现可以成功地得到25,26,27,28-四羟基杯[4]芳烃、37,38,39,40,41,42-六羟基杯[6]芳烃以及25,26,27,28-四甲氧基杯[4]芳烃的对位全硝化产物, 产率分别为90%, 70%和40%; 尤其是25,26,27,28-四羟基杯[4]芳烃与NO₂的反应20 min即可完成. 认为共振式酚氧负离子结构是影响该类硝化反应的关键, 并对反应机理进行了探讨.     

Linked Supramolecular Building Blocks for Enhanced Cluster Formation

Methylene‐bridged calix[4]arenes have emerged as extremely versatile ligand supports in the formation of new polymetallic clusters possessing fascinating magnetic properties. Metal ion binding rules established for this building block allow one to partially rationalise the complex assembly process. The ability to covalently link calix[4]arenes at the methylene bridge provides significantly improved control over the introduction of different metal centres to resulting cluster motifs. Clusters assembled from bis‐calix[4]arenes and transition metal ions or 3d‐4f combinations display characteristic features of the analogous calix[4]arene supported clusters, thereby demonstrating an enhanced and rational approach towards the targeted synthesis of complex and challenging structures.     

Synthesis of （p-Formylphenyl）azo Calix[4]arenes

Five novel azo calix[4]arenes were reported. The p-aminobenzaldehyde was diazotized with sodium nitrite in aqueous hydrochloride solution. Mono-, bis-, tris- and tetrakis(p-formylphenyl)azo calix[4]arenes (including proximal and distal isomers) were obtained respectively by diazo-coupling in different molar ratio to calix[4]arene(1) under pH=7.5--8.5 at 0-5℃. All (p-formylphenyl)azo calix[4]arenes were characterized by ^1H NMR, ^13C NMR, IR, MS (ESIMS) spectroscopies and elemental analysis.     

Calix[4]arene stabilized Transition Metal Imido Complexes

The usage of calix[n]arenes as ancillary poly(phenolate) ligands is a rapidly developing area in coordination chemistry. This article focuses on the synthesis, structure and reactivity of calix[4]arene‐ and calix[4]arene ether‐stabilized imido complexes of group 4 — 6 transition metals as well as on the comparison of calix[4]arene dialkyl ethers in particular with other widely employed related ligand systems such as salenes, porphyrins and tetraazaannulenes. Contrary to these nitrogen containing systems, it is much easier to control the charge of the ligand system through the degree of alkylation of the calixarene's lower rim without a major change in the geometry of the resulting metal complex. This could lead to isoelectronic and structurally closely related transition metal complex fragments for metals in neighboring groups of the periodic table or for metals in different oxidation states. The “intrinsic” reactivity of metal imido linkages might therefore be explored using calix[4]arenes and calix[4]arene ethers and first results are summarized in this research report.     

New artificial receptors from selectively functionalized calix[4]arenes

Abstract

The development of new synthetic methods for the monoalkylation of calix[4]arenes at the lower rim allows the synthesis of a new class of trihydroxamate siderophores. Three chelating hydroxamic acid units are introduced through a sequence of reactions which blocks the macrocycle in the cone conformation. The new ligands obtained form neutral 1:1 complexes (FeL) with iron (III), which are stable in EtOH/H₂O 9:1 at pH 2–7. Calix[4]arene bis-crown ethers are prepared by exploiting the selective 1,2-(proximal) functionalization of calix[4]arenes at the lower rim. These ligands are, however, less effective in complexing alkali metal cations compared with the 1,3-calix[4]arene crown-ethers which, in their partial cone structure, offer a better shielding for the complexed cations. Rigid upper rim-bridged calix[4]arenes potentially useful for the inclusion of neutral molecules are prepared by exploiting the selective 1,3-diformylation of calix[4]arene at the upper rim. Finally a new chloromethylation method for calix[4]arenes blocked in the cone conformation is described together with the synthesis of new cavitands.     

Stereochemical control of calixarenes useful as rigid and conformationally diversiform platforms for molecular design

Stereochemical problems and related functions of calix[4]arenes, calix[6]arenes and their chiral derivatives have been reviewed. In p-tert-butylcalix[4]arene (1H₄) and its mono-, di-, tri-, and tetra-O-alkyl derivatives (1H₃R, 1H₂R₂,1HR₃, and 1R₄, respectively), 23 different homologues can exist (including 1H₄). We found that the OH group in the unmodified phenol unit is permeable through the calix[4]arene ring. Thus, several conformational isomers become equivalent after the ‘oxygen-through-the-annulus’ rotation of the OH group and the number of possible homologues is reduced to 13 (including 1H₃). We report in this paper the syntheses of all of these possible conformational isomers using a protection-deprotection method with a benzyl group and metal template effects. On the other hand, all possible chiral isomers that can be derived from calix[4]arene by modification of the OH groups have been systematically classified. Molecular asymmetry can be generated not only by different substituents but also by conformational isomerism. The numbers of chiral isomers are 17 for tetra-O-substituted calix[4]arenes, 9 for tri-O-substituted calix[4]arenes, 3 for di-O-substituted calix[4]arenes, and 0 for mono-O-substituted calix[4]arenes. Chiral calix[4]arenes can also be designed by the introduction of a substituent into the m-position of a phenol unit or by the use of a dissymmetric ‘stapling reaction’ in proximal phenol units. In p-tert-butylcalix[6]arene, the conformational behaviour is totally different from that in p-tert-butylcalix[4]arene. A large degree of conformational freedom remains in the framework, and both ‘oxygen-through-the-annulus rotation’ and ‘para-substituent-through-the-annulus rotation’ can take place. However, when metal cations are bound to calix[6]aryl esters, the conformation is changed to a cone type. Bridging and capping are powerful methods to immobilize the conformation of calix[6]arenes. In addition, definitive evidence for ring immobilization was obtained from the absence of racemization in the chiral calix[6]arene. A successful example of chiral recognition for α-amino acid derivatives was achieved by using chiral homooxacalix[3]arene which has ‘pseudo C₂ symmetry’. These examples indicate that calixarenes serve as rigid and conformationally diversiform platforms for the design of novel functional supramolecules.     

The study of spectrosgraphic properties and molecular recognition of cali

The absorption spectrum and fluorescence spectrum of calix[n]arenes are studied systematically. The self-association of calix[n]arenes is proposed and the self-association constant is also obtained. The recognition properties of calix[n]arenes are studied and the inclusion constant is calculated.     

Physicochemical Characterization of Hydrated 4-Sulphonato-Calix[n]arenes: Thermal,Structural, and Sorption Properties

In this study, the thermal behavior of three hydrated water-soluble 4-sulphonato calix[n]arenes was investigated. The melting points, heats of fusion, and heats of solution of the calix[4]arene, calix[6]arene and calix[8]arene were 277, 262, and 270°C; 192, 242 and 351 kJ/mol; and 30, 58 and 63 kJ/mol, respectively. Lower heat of fusion, smaller increase in entropy and smaller heat of solution of the calix[4]arene compared to the calix[6]arene and calix[8]arene showed that less heat was required to break up the crystal lattice of the smaller macromolecule. This apparent anomaly is rationalized in terms of smaller cooperativity of interaction between the molecules of calix[4]arene in the crystal lattice, although the strength of the individual interactions is stronger as evidenced by the higher melting point. TGA analysis indicated that about 17–20% of water was associated with the calix[n]arenes. Both TGA and hot stage microscopy results indicated that upon heating these molecules underwent stepwise water loss. TGA kinetics showed that the 4-sulphonato-calix[8]arene lost water easier than the other two calixarenes. The moisture adsorption behavior of all calixarenes followed type II isotherms. For the same amount of material, the calix[6]arene adsorbed more moisture than the calix[4]arene and the calix[8]arene. Moreover, dehydrated less crystalline 4-sulphonic-calix[n]arenes powders are hydroscopic.

     

桥联杯[6]芳烃研究进展

综述了桥联杯[6]芳烃的合成及构象固定等方面的研究进展,并以下缘1,4位桥联杯[6]芳烃,杯[6]冠醚和杯[6]穴醚及其类似物等主体分子为重点,综述了桥联杯[6]芳烃在分子识别和超分子化学领域中的应用研究的最新进展。     

Synthesis of amine, halide, and pyridinium terminated 2-alkyl-p-tert-butylcalix[4]arenes

The synthesis of calix[4]arenes with functional groups tethered to a single methylene bridge has been explored. Mono-lithiated calix[4]arenes react with 1,ω-bromochloroalkanes to give 2-(ω-chloroalkyl)-calix[4]arenes, which function as key intermediates in the synthesis of a variety of tether-functionalized calix[4]arenes. Subsequent reactivity of these chloroalkyl species has allowed for successful synthesis of 2-(ω-iodoalkyl)-calix[4]arenes, 2-(ω-pyridiniumalkyl)-calix[4]arenes, and 2-(ω-aminoalkyl)-calix[4]arenes. This latter group of amine-terminated calix[4]arenes are especially significant as they may serve as useful entries to a wide range of subsequent chemistry, including metal coordination or attachment to a solid support. Both alkyl and aryl amines have been incorporated at the end of the tether, and a 2,6-diisopropylaniline derivative has been analyzed by X-ray diffraction.     

para‐Sulfonated Calixarenes Used as Synthetic Receptors for Complexing Photolabile Cholinergic Ligand

The water‐soluble tetra‐, hexa‐ and octasulfonated calix[4]arenes, calix[6]arenes, and calix[8]arenes 1 – 3 , respectively, were investigated as potential synthetic receptors for photolabile cholinergic ligand A , a photolytic precursor of choline. Ligand A is a bifunctional molecule carrying a photolabile 2‐nitrobenzyl group at one end and a choline moiety at the other end. Results from NMR studies have shown that calixarenes 1 – 3 form stable 1 : 1 complexes with A , having similar binding potential to that observed with the cholinergic enzymes acetylcholinesterase and butyrylcholinesterase. Further studies have suggested that calix[8]arene forms a ditopic complex by binding concomitantly to both the cationic choline moiety and the aromatic photolabile group of A , whereas calix[4]arene and calix[6]arene form monotopic complexes with A . The ditopic complex between calix[8]arene and A results from mutually induced fitting process, while the monotopic complexes between calix[4]arene and A can be regulated by pH: at neutral pH, calix[4]arene specifically binds the cationic choline moiety, while, at acidic pH, it complexes unselectively both the cationic choline moiety and the aromatic group of A . Our results show that para‐sulfonated calixarenes are versatile artificial receptors which bind in various ways to the bifunctional photolabile cholinergic ligand A , depending on their size, geometry, and state of protonation.     

Molecular design of calixarene-based ion-selective electrodes

In order to obtain insights into relationships between the calix[4]arene structure and the ion selectivity in the electrode system, 20 ionophoric calix[4]arenes were synthesized and their ion selectivity (with Na⁺ as a standard) estimated. Among these ionophoric calix[4]arenes, 25,26,27,28-tetrakis[(ethoxycarbonyl)methoxy]-p-t-octylcalix[4]arene afforded the highest logK _NA,M ^pot value (–3.1) in the presence of 2-fluorophenyl-2-nitrophenylether (10) as the best of 13 plasticizers. This is the first example in which the Na⁺/K⁺ selectivity exceeds a factor of 10³ in the electrode system based on the neutral carrier. The high Na⁺ selectivity is attributed to modification of the upper rim which ostensibly has no relation with the component of the cavity. This paper demonstrates the potential relationships between the unique structure of the calix[4]arene-based ligands and selectivity performance for the design of ion-selective electrodes.     

Complexation and Separation of Amines, Amino Acids, and Peptides by Functionalized Calix[n]arenes

The ability of calix[n]arenes to form complexes, to act as extractants in liquid–liquid extraction, and run as carriers in transport through liquid membranes of different biological amine compounds (e.g., ammonium ion, amines, amino acids, and peptides) has been the central topics of many reports. These features recommend the calix[n]arenes as competitive candidates for studying the interactions involved in host–guest recognition as well as useful receptors in separation processes. Some specific aspects of their applications in binding and separation of various amine compounds by extraction, and in transport through liquid membranes have therefore been considered. The effect of the factors that might influence the separation of above compounds by extraction, and the transport through liquid membranes using the calix [n]arenes has been presented.     

Synthesis and Evaluation of Thermal Properties of Fluorinated Poly(aryl ether) Dendritic Structures Based on Calix[4]arenes

By using a convergence approach two new poly(aryl ether) dendritic structures carrying 4-fluorobenzyl bromide on the surface and calix[4]arenes as a core with G1 were synthesized for the first time. Fluorinated dendritic structures are connected through ether bonds on the lower rim of the calix[4]arene unit. Its structure was determined by ¹H-NMR and elemental analysis. The thermal stabilities of fluorinated dendritic structures, based on calix[4]arenes, were investigated using thermogravimetric analysis. The activation energies and thermal degradation of the structures were calculated with the Ozawa Method.     

Membrane extraction of organic compounds. 3. A new receptor fragment for carboxylate groups based of the calix[4]arene platform

A new type of macrocyclic receptor able to bind organic substrates containing carboxy and carboxylate groups was designed on the basis of 1,3-disubstituted calix[4]arenes. A series of disubstitited calix[4]arenes were prepared in 60—80% yields by selective 1,3-alkylation of p-tert-butylcalix[4]arene. The compounds obtained were tested as carriers for dl-tartaric, glycolic, dl-amygdalic, and dl-glutamic acids through liquid membranes immobilized on a polymer matrix. The structural factors favorable for the transport of these hydrophilic substrates through lipophilic membranes were established.     

基于杯芳烃的分子容器的合成及其对有机铵的可逆识别

将三(吡啶基甲基)胺(TPA)引入杯芳烃的下缘, 合成了一种新的具有杯状结构的杯芳烃衍生物, 研究了其对有机铵的分子识别行为.