Synthesis of imidazo[4,5-<Emphasis Type="Italic">e</Emphasis>]benzo[1,2-<Emphasis Type="Italic">c</Emphasis>;3,4-<Emphasis Type="Italic">c</Emphasis>´]difuroxanes

A method for the synthesis of imidazo[4,5-e]benzo[1,2-c;3,4-c´]difuroxanes, potential nitric oxide donors, has been developed. The synthesized compounds were characterized by IR and NMR spectroscopy, high resolution mass spectrometry, and elemental analysis.     

Preparation and crystal structure of bis(triethylene glycol-<Emphasis Type="Italic">O</Emphasis>,<Emphasis Type="Italic">O</Emphasis>′,<Emphasis Type="Italic">O</Emphasis>′’,<Emphasis Type="Italic">O</Emphasis>‴)manganese(II) dibromide

A new complex, bis(triethylene glycol-O,O′,O′’,O?)manganese(II) dibromide [Mn(TEG)₂]²⁺·2Br^?, was prepared. Its structure was studied by single crystal X-ray diffraction. The complex cation [Mn(TEG)₂]²⁺ is of the host-guest type with two TEG ligands (podands) as hosts. Both TEG ligands are disordered and tetradentate, with all the four oxygen atoms of each ligand participating in the coordination. The Mn²⁺ cation has coordination number 8, and its coordination polyhedron is a distorted bisdisphenoid (trigonal dodecahedron). The geometric parameters (bond lengths, bond and torsion angles) of the complex were determined relatively accurately. In the crystal structure, the ions form infinite thick layers by interionic hydrogen bonds O-H···Br^?.     

<Emphasis Type="Italic">N</Emphasis>-arylsulfanyl-<Emphasis Type="Italic">N</Emphasis>-arylsulfonyl(acyl)-<Emphasis Type="Italic">N</Emphasis>′-phenylthiourea sodium salts

Reactions of N-arylsulfonyl(acyl)arenesulfenamide sodium salts with phenyl isothiocyanate afforded N-arylsulfanyl-N-arylsulfonyl(acyl)-N-phenylthioura sodium salts which were found to increase thermal stability of finely dispersed poly(vinyl chloride).Translated from Zhurnal Organicheskoi Khimii, Vol. 40, No. 10, 2004, pp. 1532–1535.Original Russian Text Copyright © 2004 by Koval, Oleinik.     

Synthesis of New Thieno[2,3-<Emphasis Type="Italic">b</Emphasis>:5,4-<Emphasis Type="Italic">c</Emphasis>′]dipyridines

Summary. We describe the formation of thieno[2,3-b:5,4-c]dipyridines from 5,6-dihydropyridine-2(1H)-thiones. The two-step reaction mechanism was revealed by isolation of an intermediate. The oxo and thioxo groups of the obtained tricyclic compounds were hydrogenated selectively. The structures of all new compounds were elucidated by NMR experiments.Received December 17, 2002; accepted December 20, 2002 Published online June 2, 2003     

Production and Accumulation of 4-<Emphasis Type="Italic">O</Emphasis>-Methyl-α-<Emphasis Type="SmallCaps">d</Emphasis>-Glucuronosyl-Xylotriose by Growing Culture of Thermophilic <Emphasis Type="Italic">Anoxybacillus</Emphasis> sp. Strain JT-12

A thermophilic Anoxybacillus sp. strain JT-12, isolated from soil, produced acidic xylotriose, 4-O-methyl-α-d-glucuronosyl-xylotriose (MeGlcAX₃), as a main product from birchwood xylan and accumulated them in the culture under optimum conditions at pH 7.0 and 55 °C using 0.75% (w/v) birchwood xylan as a carbon source for 42–72 h. The acidic xylotriose was purified by ethanol precipitation and high-performance liquid chromatography using NH₂ Lichosher® 100 column. The results of electrospray ionization mass spectrometry, mass to charge ratio (m/z) 603.23, confirmed that the purified sample was acidic xylotriose that had benefits and applications in many fields.     

SBR composites reinforced with <Emphasis Type="Italic">N</Emphasis>-isopropyl-<Emphasis Type="Italic">N</Emphasis>′-phenyl-<Emphasis Type="Italic">P</Emphasis>-phenylenediamine-modified clay

SBR compounds including the N-isopropyl-N’-phenyl-p-phenylenediamine-modified clay(organoclay) were prepared.Effects of modified clay and antioxidant(IPPD) contents on mechanical and rheological properties of SBR composites were studied.FTIR results confirmed that the clay was chemically modified by IPPD and changed into an organoclay.X-ray diffraction(XRD) results confirmed the increase in interlayer distance of the clay due to the insertion of IPPD.Rheological and cure characteristics of SBR compounds were determined using RPA(Rubber Process Analyzer) and rheometer.Scorch time and cure time of SBR compounds decreased with introduction of the organoclay.Mechanical properties and heat aging resistance of the SBR composites were improved significantly by incorporation of the organoclay.     

<Emphasis Type="Italic">N</Emphasis>′-tetrazolylmethoxyl derivatives of <Emphasis Type="Italic">N</Emphasis>-methyldiazene <Emphasis Type="Italic">N</Emphasis>-oxides

A preparation method was developed for previously unknown tetrazole derivatives containing in the 1, 2, and/or 5 positions of the tetrazole ring N-methyldiazene-N-oxide-N′-oxymethyl groups.     

Crystal structure of the molecular complex of 1,3,5-<Emphasis Type="Italic">tris</Emphasis>-<Emphasis Type="Italic">m</Emphasis>-chlorophenylisocyanurate with ε-caprolactone

The molecular complexes of 1,3,5-tris-m-chlorophenylisocyanurate and ε-caprolactone were synthesized by the reaction of the latter with 3-chlorophenylisocyanate in the presence of triethylamine. Single crystals were grown, and the molecular and crystal structures of the synthesized complexes were investigated.     

Synthesis and reactivity of 2-(2-furyl)-1,7-dimethyl-1<Emphasis Type="Italic">H</Emphasis>,7<Emphasis Type="Italic">H</Emphasis>-benzo[1,2-<Emphasis Type="Italic">d</Emphasis>: 3,4-<Emphasis Type="Italic">d</Emphasis>′]diimidazole

2-(2-Furyl)-1,7-dimethyl-1H,7H-benzo[1,2-d: 3,4-d′]diimidazole was synthesized by the Weidenhagen reaction followed by N-methylation. Electrophilic substitution reactions of the title compound (nitration, bromination, sulfonation, formylation, and acylation) involved both the furan ring and central benzene fragment.     

1,3-Diamino-2-Hydroxypropane-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′,<Emphasis Type="Italic">N</Emphasis>′-Tetraacetic Acid: Crystal and Molecular Structures

The synthesis, IR spectroscopic study, and X-ray diffraction analysis (CIF file CCDC no. 1574078) are carried out for 1,3-diamino-2-hydroxypropane-N,N,N′,N′-tetraacetic acid (I). The structural units of a crystal of compound I are (H_4.5HPdta)^0.5– anions, (H_5.5HPdta)^0.5+ cations, and molecules of water of crystallization joined by a branched network of hydrogen bonds: strong intermolecular O–H…O and intramolecular N–H…O bonds.     

Basicity of Highly Substituted β-Octaalkyl-<Emphasis Type="Italic">meso</Emphasis>-aryl- and -<Emphasis Type="Italic">meso</Emphasis>-thienyl Porphyrins

5-Phenyl-, 5,15-diphenyl-5,15-di(thiophen-2-yl)-, and 5,10,15,20-tetraphenyloctaalkyl-21H,23H-porphyrins in benzene–acetic acid mixtures are moderate bases (pK–0.27 to–2.48). There is no simple correlation between the basicity constants and any electronic or geometric structure parameter of their molecules due to the contributions of three factors to the basicity: distortion of the planar structure in highly substituted macrocycles and their protonated forms, positive charge delocalization over the conjugated bond system, and electronic effects of substituents.     

Facile cellulose nanofibrils amidation using a ‘<Emphasis Type="Italic">one</Emphasis>-<Emphasis Type="Italic">pot</Emphasis>’ approach

We report a ‘one-pot’ synthetic approach for TEMPO (2,2,6,6-tetramethyl-piperidin-1-oxyl) oxidized cellulose nanofibrils (TOCN) surface amidation by coupling up to 70% of superficial carboxylic units in TOCN with long alkyl chain primary amines (dodecylamine and octadecylamine) using TBTU [O-(1H-benzotriazol-1-yl)-N,N,N’,N’-tetramethyluronium tetrafluoroborate] uronium salt as coupling agent. Raw TOCNs were produced from commercial microcrystalline cellulose and have an elongated highly tangled morphology with nanometric diameters and lengths up to several micrometers with a crystallinity of 62%. TOCN´s degree of oxidation was 1.25 mmol –COOH groups/g cellulose. The TOCN-amidated products named TOCN-AMDC12 and TOCN-AMDC18 depending upon to the primary amine used for the synthesis (dodecylamine –C12– for the former and octadecylamine –C18– for the latter), were characterized using field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy with attenuated total reflectance and X-ray diffraction. After amidation the hydrated gel-like TOCNs become a cream-colored gel insoluble in water and soluble in toluene. IR data indicates formation of an amide bond after the reaction, and FESEM images suggest a slight increase in fibril width as a result of the long-chain amide derivatives grafted onto the TOCN’s surface. Thermal stability and hydrophobicity of the products were determined using thermogravimetrical analysis and contact angle (CA) measurements. The TOCN-amidated products showed improved thermal properties with maximum decomposition temperatures of 347 and 358 °C, for TOCN-AMDC12 and TOCN-AMDC18 respectively, when compared to the raw TOCN (T_d 340 °C); and high hydrophobicity with CA of 61° and 67°, respectively. Finally, the proposed method for TOCN amidation has advantages over current amidation approaches in that it is performed in aqueous media, does not require heating and occurs rapidly (2 h).     

Reaction of methyl-4-methylene-2,3-<Emphasis Type="Italic">O</Emphasis>-isopropylidene-β-D-ribofuranoside with <Emphasis Type="Italic">N</Emphasis>-bromosuccinimide in aqueous tetrahydrofurane

Methyl-4-methylene-2,3-O-isopropylidene-β-D-ribofuranoside prepared from D-ribose reacted in a system NBS-THF-H₂O to give a mixture of stereoisomeric products of regioselective bromohydroxylation of a double bond. The reaction involved a hydrolysis of the glycoside bond, but the acetonide protective group was retained. The mechanism of the selective hydrolysis originating from the ring-chain tautomerism of bromohydrins obtained was proved by the ¹H NMR spectra of the steroisomeric methyl-5-deoxy-5-bromo-4-hydroxy-2,3-O-isopropylidene-β-D-ribofuranosides. By crotonic cyclization of the formed masked 1,4-dicarbonyl compounds at heating in benzene in the presence of neutral Al₂O₃ a new chiral cyclopentenone block, 2-bromo-4,5-isopropylideneoxycyclopent-2-en-1-one, was obtained in a low yield.     

Determination of the <Emphasis Type="Italic">R</Emphasis> ⇄ <Emphasis Type="Italic">S</Emphasis> enantiomerization barrier in 5,6-dihydrobenzoimidazo[1,2-<Emphasis Type="Italic">c</Emphasis>]quinazolines

Chiral imidazoquinazolines undergoing thermally induced reversible R ⇄ S enantiomerization have been synthesized by the interaction of 2-(o-aminophenyl)benzimidazoles with aldehydes and ketones. The benzimidazole fragment has been used for the first time as an indicator group in temperature-dependent ¹H NMR spectra for determining the energy barrier of this rearrangement. The effects of nearby substituents on the kinetic and activation parameters, and on the recyclization mechanism have been investigated.     

Highly Efficient Regioselective Synthesis of 5′-<Emphasis Type="Italic">O</Emphasis>-lauroyl-5-azacytidine Catalyzed by <Emphasis Type="Italic">Candida antarctica</Emphasis> Lipase B

Enzymatic regioselective acylation of 5-azacytidine with vinyl laurate was successfully conducted with an immobilized lipase from Candida antarctica type B (i.e., Novozym 435) for the first time. The acylation of 5-azacytidine took place at its primary hydroxyl group and the desired product 5′-O -lauroyl-5-azacytidine could be prepared with high reaction rate, high conversion, and excellent regioselectivity. The influences of several key variables on the enzymatic acylation were also systematically examined. Pyridine was found to be the best reaction medium. The optimum initial water activity, the molar ratio of vinyl laurate to 5-azacytidine and reaction temperature were 0.07, 30:1, and 50 °C, respectively. Under the optimized conditions described above, the initial reaction rate, the substrate conversion, and the regioselectivity were as high as 0.58 mM/min, 95.5%, and >99%, respectively, after a reaction time of around 5 h.     

Alkyl <Emphasis Type="Italic">β</Emphasis>-<Emphasis Type="SmallCaps">d</Emphasis>-cellulosides: non-reducing cellulose mimics

Non-reducing cellulose mimics, termed alkyl β-d-cellulosides, were successfully prepared by two efficient multi-step syntheses starting from commercially available microcrystalline cellulose or cellulose triacetate. Introduction of the alkoxy moiety and degradation of the cellulose backbone was carried out in the presence of a Lewis acid, on one hand. On the other hand, cellulose hydrolysis mediated by mineral acids was combined with β-glycosidation performed in the presence of silver salts. The samples obtained possess a number-average degree of polymerization from 5 to 25, determined by size-exclusion chromatography, elemental analyses, NMR spectroscopy, and MALDI-TOF mass spectrometry. Samples in multi-gram quantities were available. Selective formation of a β-glycosidic bond between the C-1 atom of the reducing end group and alkoxy moieties was confirmed by a combination of 2D NMR spectroscopic and MALDI-TOF MS techniques. Due to the blocking of the aldehyde function, the cellulosides described are very useful mimics for the investigation of polysaccharide interactions with other complex molecules such as proteins or to determine polymer properties in solution or in solid state.     

Properties of a poly(ethylene glycol)-<Emphasis Type="Italic">block</Emphasis>-poly(<Emphasis Type="Italic">γ</Emphasis>-benzyl <Emphasis Type="SmallCaps">l</Emphasis>-glutamate)-<Emphasis Type="Italic">graft</Emphasis>-poly(ethylene glycol) copolymer membrane

Poly(ethylene glycol)-block-poly(γ-benzyl l-glutamate)-graft-poly(ethylene glycol) (PEG-block-PBLG-graft-PEG) copolymer was synthesized by the ester exchange reaction of PBLG-block-PEG copolymer with a PEG chain. Surface morphology of the PEG-block-PBLG-graft-PEG copolymer membrane was characterized by atomic force microscopy (AFM). Mechanical and chemical properties of the PEG-block-PBLG-graft-PEG copolymer membrane were investigated by tensile testing and contact angle testing. The effects of grafting ratio on the properties of PEG-block-PBLG-graft-PEG copolymer membrane were primarilly studied.     

Synthesis and antibacterial and antifungal activities of <Emphasis Type="Italic">N</Emphasis>-(tetra-<Emphasis Type="Italic">O</Emphasis>-acetyl-β-<Emphasis Type="SmallCaps">d</Emphasis>-glucopyranosyl)thiosemicarbazones of substituted 4-formylsydnones

Background

Sydnone is a heterocycle that exhibits remarkable pharmacological activities, including antimicrobial, anti-inflammatory, analgesic, antipyretic and antioxidant activities. Thiosemicarbazones are of compounds that contain the –NHCSNHN=C< linkage group and are considerable interest because they exhibit important chemical properties and potentially beneficial biological activities. Similarly, thiosemicarbazones having carbohydrate moieties also exhibit various significant biological activities.

Results

The compounds of 3-formyl-4-phenylsydnones were obtained by Vilsmeyer-Haack’s formylation reaction and were transformed into thiosemicarbazones by condensation reaction with N-(2,3,4,6-tetra-O-acetyl-β-d-glucopyranosyl)thiosemicarbazide. Reaction were performed in the presence glacial acetic acid as catalyst using microwave-assisted heating method. Reaction yields were 43?85 %. The antimicrobial activities of these thiosemicarbazones were screened in vitro by using agar well diffusion and MIC methods. Among these thiosemicarbazones, compounds 4k, 4l, 4m and 4n were more active against all tested bacterial strains, especially against S. epidermidis, B. subtilis and E. coli. The MIC values in these cases are 0.156, 0.156 and 0.313 μg/mL, respectively. All compounds showed weak to moderate antifungal activity against C. albicans and A. niger than nystatin (MIC = 0.156?0.625 μg/mL vs. MIC = 0.078 μg/mL of nystatin), and thiosemicarbazones 4l, 4m and 4n exhibited significant activity with MIC = 0.156 μg/mL. These compounds also had good antifungal activity against F. oxysporum similarly to nystatin (MIC = 0.156 μg/mL). Among the tested compounds having halogen group 4k, 4l, 4m and 4n showed highest activity against three strains of fungal organisms.

Conclusions

In summary, we have developed a clean and efficient methodology for the synthesis of novel thiosemicarbazone derivatives bearing sydnone ring and d-glucose moiety; the heterocyclic and monosaccharide system being connected via ?NH?C(=S)NH?N=C< linker using molecular modification approach. The methodology could be further extended and used for the synthesis of other thiosemicarbazones of biological importance. 4-Formyl-3-arylsydnone N-(2,3,4,6-tetra-O-acetyl-β-d-glucopyranosyl)thiosemicarbazones have been synthesized under microwave-assisted heating conditions. Almost all obtained compounds showed remarkable activities against the tested microorganisms. Among the tested compounds having halogen group 4k, 4l, 4m and 4n showed highest activity against all tested strains of bacterial and fungal organisms.

Open image in new window

Graphical abstract:Synthesis and antibacterial and antifungal activities of N-(tetra-O-acetyl-β-D-glucopyranosyl)thiosemicarbazones of substituted 4-formylsydnones

     

<Emphasis Type="Italic">iso</Emphasis>-<Emphasis Type="Italic">α</Emphasis>-Cyclopiazonic acid,a new natural product isolated from the marine-derived fungus <Emphasis Type="Italic">Aspergillus flavus</Emphasis> C-F-3

A new natural product, iso-α-cyclopiazonic acid (1), together with its isomer α-cyclopiazonic acid (2); three mycotoxins: aflatoxin B₁ (AFB₁) (3), aflatoxin Q₁ (AFQ₁) (4), and O-methylsterigmatocystin (OMST) (5); two diketopiperazine alkaloids: ditryptophenaline (6) and 3-[(1H-indol-3-yl)methyl]-6-benzylpiperazine-2,5-dione (7), were isolated from the marine-derived fungus Aspergillus flavus. Their structures were determined by analysis of spectroscopic data. The cytotoxicities of compounds 1 and 2 were studied using HL-60, MOLT-4, A-549, and BEL-7402 cell lines.     

Computer models of eutectic-type <Emphasis Type="Italic">T</Emphasis>–<Emphasis Type="Italic">x</Emphasis>–<Emphasis Type="Italic">y</Emphasis> diagrams with allotropy

Using the eutectic-type T–x–y diagram as an example, it can be represented the analysis of its geometrical construction dependence on the temperature of a component two polymorphous modifications which participate in mono- and invariant metatectic and invariant eutectic (eutectoid) transformations above or below (and within) binary eutectics temperature intervals and below a ternary eutectic temperature. Computer models for considered phase diagrams have been designed. Such models help to solve applied tasks like visualization, isopleths and isothermal sections decoding, mass balances calculation and evaluation of phase and conglomerate concentration in microstructure.