Some features found in the extraction of platinum group metals and gold with calix[4]arenamines and calix[n]arene thioethers from hydrochloric acid solutions

Extraction of platinum group metals and gold from hydrochloric acid solutions with calix[4]arenamines (CAA) and calix[n]arene thioethers (n = 4, 6; CTE) was studied. The high macrocyclic effects (10²–10³) are due to chelation between metals and the donor centers of macrocycles in the systems CAA-Pd and CTE-Ag, Pt^II, and Pt^IV. New CAA-based extracting systems for collective extraction of Pd, Pt, Au, Ir, and Rh and new CTE-based systems for separation of Au and Pd from Ag and Pt were justified.     

Study on thermal decomposition of calix[6]arene and calix[8]arene

Thermal decomposition kinetics of calix[6]arene (C6) and calix[8]arene (C8) were studied by Thermogravimetry analysis (TG) and Differential thermal analysis (DTA). TG was done under static air atmosphere with dynamic heating rates of 1.0, 2.5, 5.0, and 10.0 K min⁻¹. Model-free methods such as Friedman and Ozawa–Flynn–Wall were used to evaluate the kinetic parameters such as activation energy (E _a) and pre-exponential factors (ln A). Model-fitting method such as linear regression was used for the evaluation of optimum kinetic triplets. The kinetic parameters obtained are comparable with both the model-free and model-fitting methods. Within the tested models, the thermal decomposition of C6 and C8 are best described by a three dimensional Jander’s type diffusion. The antioxidant efficiency of C6 and C8 was tested for the decomposition of polypropylene (PP).     

Complexation of amino acids derivatives in water by calix[4]arene phosphonic acids

Series of the calix[4]arene phosphonic acids with various substituents at the lower rim was synthesized. Complexing properties of these receptors towards methyl esters of six amino acids strongly depended on the calix[4]arene conformation flexibility. The complex formation processes were monitored using ¹H NMR spectroscopy (deuterated phosphate buffer at pD 7.3, 22 °C) and association constant values were evaluated. Inherently mobile calix[4]arene molecule 3 occurred in cone conformation in aqueous solution turned out to be more effective in complexation of the basic amino acids methyl esters compared to the rigid 2 and flexible 4. Mixed 1:2 and 2:1 (host–guest) complexes were observed for compound 1 with all amino acids methyl esters.     

Complexation of phenols by calix[4]arene Diethers in a low-permittivity solvent. Self-switched complexation by 25,27-Dibenzyloxycalix[4]arene

To improve the selectivity of sensing, the thermodynamics of the complex formation of some calix[4]arene hosts with neutral phenol guests was studied in carbon tetrachloride as nonpolar solvent. The molecular shape of calixarenes was varied by the selective functionalization with tBu and O-CH2-Ph (O-benzyl) or OPr groups at the upper and lower rim, respectively. To vary the electron density on the guest's aromatic rings, the parent phenol was functionalized in the para position with electron-withdrawing Cl, as well as H, and electron-releasing CH3 and tBu groups. To study the interaction between calixarene and the guests, PL and quantum-chemical methods were applied. The results revealed an overall 1:1 complex stoichiometry except for the parent dibenzyloxycalix[4]arene, where 1:2 host-guest stoichiometries were observed irrespective of the quality of phenol. In the latter case, the complex formation shows a self-switched character: the first phenol molecule is included in the calixarene cavity, and only afterward, a second guest molecule is bound by the two benzyloxy aromatics. Although the enthalpy change predicts strong interaction between the host and the guest, the Gibbs free energy change of the complex formation is small, resulting in a relatively low complex stability. The solvent-relaxation measurements support that the unexpected entropy change could be the consequence of the reorientation of solvent molecules around the calixarene building block. The reorientation is assisted by dispersive forces between solute and solvent molecules. IR and RAMAN analysis of the complexes exclude a considerable participation of the phenolic OH group in the stabilization of the complex. This result is in agreement with earlier findings where deterministic role of pi-pi interaction in the complex stability was assumed.     

Thermodynamic study of functionalized calix[n]arene and resorcinol[n]arene monolayers spreaded at an aqueous pendant drop

The behavior of insoluble calix[n]arene and resorcinol[n]arene derivatives monolayers were studied through the use of a constant surface Langmuir balance based on Axisymmetric Drop Shape Analysis (ADSA). In each case, a stable monolayer was obtained and different transitions (induced for lateral compression) could be identified. Thermodynamic parameters were computed through two dimensional Clausius–Clayperon equations and used to valuate the monolayer stability. A noticeable reduction of thermodynamic parameters occurred at highly tested temperatures (328 and 338 K) for those compounds that had hydrocarbon tails or benzene rings attached to one side of macrocyclic rim. Such fact was related to a monolayer rearrangement where the macrocyclic ring changed from a parallel to a perpendicular orientation. In this orientation the hydrophobic interactions between hydrocarbon chains and benzene rings were maximized. At highly temperature, where vigorous molecular motion existed, those interactions were superior to the stabilization effect through hydrogen bond.     

Selective extraction of toxic heavy metals and biological activity studies using pyrimidylthioamide functionalised calix[4]arene

The current study comprises synthesis of pyrimidylthioamide derivatized calix[4]arene (5), and its comparative liquid–liquid extraction properties with the compound 4 towards the selected transition metal ions (Cu²⁺, Co²⁺, Ni²⁺, Pb²⁺, Hg²⁺ and Cd²⁺) were investigated. Experimental results revealed that the compound 5 shows better efficiency and affinity for Pb²⁺ and Hg²⁺ ions as compared to compound 4. The antibacterial and antifungal effects of compound 5 were also investigated on various bacteria and fungi. It has been observed that compound 5 has some effects against Salmonella typhimurium NRRLB 4420, Bacillus cereus ATCC 11778, Staphylococcus aureus NRRL B767 and Bacillus subtilis NRS 744.     

Selective extraction of Fe3+ by a polymeric calix[4]arene

A polymeric compound containing more than one calixarene molecule was synthesized by reacting the oligomer ( 2 ) with 25,26,27-tribenzoyloxy-28-hydroxy calix[4]arene. After basic hydrolysis of 3a , the polymeric calixarene ( 3b ) was utilized for selective extraction of some metal cations from aqueous phase to organic phase. It was found that the compound ( 3b ) was selective toward Fe³⁺ from an aqueous solution containing Cu²⁺, Ni²⁺, Co²⁺ and Fe³⁺ cations. The mechanism of the extraction process was discussed. © 1994 John Wiley & Sons, Inc.     

Synthesis and extraction studies of polymeric phthalimido functionalized calix[4]arene

The article comprises synthesis and extraction studies of polymeric calix[4]arene having phthalimide groups at the lower rim. The polymeric phthalimido functionalized calix[4]arene was synthesized via radical initiated reactions involving a vinylic monomer 5,11,17,23-tetra-tert-butyl-25-[4-(acrylamido)benzyloxy]-26,28-bis-(2-phthalimido-ethoxy)-27-hydroxycalix[4]arene (5) with styrene. A five atom spacer group was incorporated between the bulky calixarene core and the acrylate moiety in order to minimize steric interactions which proved to impede the polymerization. From the liquid–liquid and solid–liquid extraction studies it has been concluded that the precursor 3 (5,11,17,23-tetra-tert-butyl-25-(4-nitro benzyloxy)-26,28-bis-(3-phthalimidoethoxy)-27-hydroxy-calix[4]arene) is selective for metal cations. The order of extractability of metal cations by the ligand 3 decreases in the sequence: Hg²⁺ > Cd²⁺ > Cu²⁺ > K⁺ > Co²⁺ whereas its polymeric derivative is selective in the sequence: Hg²⁺ > Cd²⁺ > K⁺ > Co²⁺ > Cu²⁺ for the metal cations used in the experiments.     

Thermal behaviour of some ester derivatives of p-tert-butyl calix[n]arene

The thermal behaviour of three ester derivatives of p-tert-butyl calix[n]arene (n?=?4, 6 and 8) in comparison with the parent calixarene was investigated by means of the thermogravimetric (TG) and differential thermogravimetic (DTG) analysis and differential scanning calorimetry (DSC). The thermal stability domains, the composition of the pyrolysis products and the thermal effects, were determined on the basis of TG, DTG and DSC plots registered in nitrogen flow. Attempts to analyse the evolved gases by TG-FTIR coupling were also performed. It was demonstrated that the stability of the calix[n]arene derivatives depends on both the size of the hydrophobic cavity and number of the substituting groups grafted on the calix[n]arene skeleton.     

Effect of conformation on metal ion extraction by calix[4]arene dicarboxylic acids

Synthetic routes to four calix[4]arene stereoisomers with two distal methoxycarboxy groups and two distal butoxy groups are reported. Conformations of cone, partial cone (butyl up), partial cone (acid up), and 1,3-alternate were established by ¹H and ¹³C-NMR spectroscopy. To probe the influence of ligand conformation on metal ion complexation, extractions from aqueous solutions into 1,2-dichloroethane were performed. These included competitive alkali metal cation extractions, competitive alkaline earth metal cation extractions, and single species extractions of Pb²⁺ and of Hg²⁺. Comparisons are also made with the results for a conformationally mobile analogue in which the two butoxy groups are replaced with methoxy groups.     

Complexation of di-benzyloxy ether derivatives of calix[4]arene with alkali earth metal cations

The synthesis and complexing abilities of 26,28-bis-benzyloxy-25,27-dihydroxy-5,11,17,23-tetra-tertbutyl-calix[4]arene towards alkali earth metal ions Mg²⁺, Ca²⁺, Sr²⁺, and Ba²⁺ in a methanol-chloroform mixture have been evaluated at 25°C, using UV-Vis spectrophotometric techniques. The results showed that the ligand is capable to complex all alkali earth cations by 1:1 metal to ligand ratios. The selectivity presented considering the calculated stability constants are in the order Mg²⁺ > Ca²⁺ > Sr²⁺ > Ba²⁺ towards the ligand.     

Synthesis and characterization of novel calix[4]arene piperazine derivative for the extraction of transition metals and dichromate ions

This article displays the synthesis of N-(2-tosylato)ethylpiperazine (ii) and 5,11,17,23-tetra-tert-butyl-25,27-bis-(2-piprazinoethyl)-26,28-dihydroxycalix[4]arene (3). Compounds (ii) and 3 were characterized through elemental analysis, FT-IR, ¹H NMR and/or ¹³C NMR studies. The transition metal cations (Hg²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Cd²⁺) and dichromate anion were studied by liquid–liquid extraction experiment. The results showed that compound 3 has moderate but selective extraction ability for Hg²⁺ and dichromate anion. Comparison between extraction properties of compound 3 with previously reported 5,11,17,23-tetra-tert-butyl-25,27-bis(isoniazidylcarbonylmethoxy)-26,28-dihydroxy-calix[4]arene (4) and protonated pyridinium form of 4 (5) is also described.     

Supramolecular structures formed by calix[8]arene derivatives

Octamethoxy calix[8]arenes substituted in the para position by amide, urea, and imide functions were synthesized from the octamethyl ether of tert-butylcalix[8]arene by ipso nitration, reduction, and acylation. Scanning force microscopy of spin coated samples on graphite suggests that these derivatives self-organize into tubular nanorods via hydrogen bonds between p-amide functions. A single-crystal X-ray structure reveals a centrosymmetric conformation for the octanitro derivative. [structure: see text]     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

Supramolecular interaction between water-soluble calix[4]arene and ATP--the catalysis of calix[4]arene for hydrolysis of ATP

The catalysis effect of water-soluble calix[4]arene C[4] (calix[4]arene-5,11,17,23-tetrasulfonate) on hydrolysis of ATP in aqueous solution was studied by HPLC. Using laser photolysis and pulse radiolysis, the supramolecular interaction between water-soluble calix[4]arene and ATP was investigated.     

Unsymmetrical calix[4]arene bisporphyrin Pacman

[structure: see text] The synthesis of a Pacman heterobisporphyrin associating an octaethyl porphyrinatozinc (ZnOEP) energy donor and a triaryl porphyrinatozinc (ZntPP) energy acceptor around a calix[4]arene spacer is described. Contrary to previous symmetrical architectures, correlations between the chromophores in the unsymmetrical calixarene bisporphyrin Pacman scaffold can now be observed in ROESY experiments. Independent of the excitation wavelength, only the luminescence of the ZntPP moiety was observed corresponding to quenching of the OEP moiety's emission.     

Novel tungsten calix[8]arene complexes

p-tert-Butylcalix[8]areneH8 reacts with WCl6 forming a number of new metallocalix[8]arenes, one of which is reduced to give the first example of a metal-metal triple bond supported by a large calixarene ligand; the degree of metallation and conformations adopted by the newly generated metallocalix[8]arene systems are determined by single crystal X-ray diffraction.     

Complexation of fullerenes by calix[n]arenes: molecular dynamic simulations and benesi-hildebrandequilibrium constants

MD simulations using a combination of AMI and AMBER are performed to elucidate the origin of complexation between fullerenes and calix[n]arenes (n = 4,6,8). Only calix[6]arenes and calix[8]arenes are suitable for complex formation. By introducing benzyl substitutents on the upper rim of the calixarenes the interaction energy between host and guest is even improved. Analysis of the data also reveals a strong stabilization by t-butyl or benzyl substitutents beside π-π interactions between the arene units of the calixarene and fullerenes. The calculated data perfectly correlate with the experimentally observed equilibrium constants.     

Selective extraction and recovery of cytochrome c by liquid-liquid extraction using a calix[6]arene carboxylic acid derivative

Recently, we reported that a calix[6]arene carboxylic acid derivative can selectively extract the lysine-rich protein cytochrome c by interacting with amino groups on the protein surface. In the present article, quantitative extraction and recovery of cytochrome c using this calix[6]arene carboxylic acid derivative are described. Both adjustment of the pH under acidic conditions and addition of an alcohol are necessary to strip the extracted protein from an organic solution to an aqueous solution. Separation of cytochrome c and lysozyme using the calix[6]arene was achieved under the optimal conditions. In the forward extraction stage, 93% of the cytochrome c was extracted, while lysozyme remained in the solution. In the subsequent stripping stage, the extracted cytochrome c was quantitatively recovered in an aqueous solution. Finally, separation of these proteins, which have similar molecular weights and isoelectric points, was accomplished.