New bis-macrocyclic complexes with transition metal ions

Template condensation of benzidine, formaldehyde, ethylenediamine or 1,3-diaminopropane, metal salt and 1-phenyl-1,3-butanedione or 2,3-butanedione in a 1:4:2:2 molar ratio results in the formation of two new series of binuclear pentaaza macrocyclic complexes: dichloro[1,1-phenylbis(7-methyl-9-phenyl-1,3,6,10,13-pentaazacyclotetradeca-6,9-diene) metal(II)], [M₂LCl₄] (M = Co^II, Cu^II, Fe^III and Zn^II) and dichloro[1,1-phenylbis(8,9-dimethyl-1,3,7,10,14-pentaazacyclopentadeca-7,9-diene) metal(II)], [M₂LCl₄] (M = Ni^II, Co^II, Cu^II and Cd^II). Both series were characterized by i.r., ¹H-n.m.r., u.v.–vis. spectral studies, conductivity and magnetic susceptibility measurements.     

The complexes of metal ions with fluoroquinolones

Fluoroquinolones are defined as an important group of synthetic antibacterial compounds, having a fluorine atom at position 6 and a piperazine ring at position 7 of quinolone-3-carboxylic acid. It was proved that the activity of quinolones was decreased in the environment of certain metal ions by the formation of sparingly soluble metal complexes. The proposed reason for such maintenance might be the chelate bonding of the quinolone to the metal. Again, it was proposed that metal ions, especially magnesium ions, were engaged in the mode of action of quinolones. In this review article, selected structures of fluoroquinolones metal complexes were performed and discussed in terms of their therapeutic application. The nuclease activity and antibacterial activity tests were presented and the effects of metal complexes were compared to free fluoroquinolones. Finally, the results were introduced. The article is published in the original.     

Methylphenylphosphinate complexes with tri- and tetra-positive metal ions

Summary A series of methylphenylphosphinate {mpp; [-O-P-Ph(Me)-O-]^–} complexes of the forms M(mpp)₃ (M = Al, Ga, In, Sc, Y, Dy, Ti, V, Cr and Fe) and M(mpp)₄ (M = Th or U) were made from the appropriate metal chloride and a large excess of MeO(Me)PhP(O) at elevated temperatures. Structures involving linear, ligand-bridged polymeric species are suggested on the basis of the i.r. and magnetic data.     

Thermal decompositions of complexes of metal ions with riboflavin

Two kinds of complexes of riboflavin with Zn(II), Co(II), Cu(II), Fe(III), Mg(II) and Ca(II) were synthesized, having metal: ligand molar ratios of 11 and 21. When heated, these complexes first lose water. Their thermal degradation in static air atmosphere starts at temperatures higher than, equal to, or lower than that observed for free riboflavin degradation. The rates and stages of pyrolysis were related to the structures of the complexes.

---

Zusammenfassung Es wurden zwei verschiedenartige Komplexe von Riboflavin mit Zn(II), Co(II), Cu(II), Fe(III), Mg(II) und Ca(II) mit einem molaren Metall-Ligandenverhältnis von 11 und 21 dargestellt. Beim Erhitzen geben diese Komplexe zuerst Wasser ab. Ihre thermische Zersetzung beginnt in unbewegter Luftathmosphäre bei einer Temperatur, die entweder mit der für die Zersetzung freien Riboflavins übereinstimmt, größer oder kleiner als diese ist. Die Abschnitte und Geschwindigkeit der Pyrolyse werden mittels der Struktur der Komplexe erläutert.

---

, , , : 11 21. . , . .

     

Study on Semi-Glycinecresol Red complexes with bivalent metal ions

Semi-Glycinecresol Red (SGCR or H(3)SGCR) was purified by means of chromatography on cellulose and by cation-exchange. A potentiometric, spectrophotometric and ESR study on the complex formation equilibria of several bivalent metal ions with SGCR was performed. The acid-base and metal-ligand stoichiometries were determined, and the formation constants, lambda(max) and absorptivities of the visible-region absorption spectra of the corresponding proton and metal complexes were determined. The copper complexes were examined by ESR spectroscopy. Each metal ion was found to form the 1:1 and 1:2 (metal:ligand) complex species, MSGCR(-) and M(SGCR)(4-)(2), in alkaline solution. However, only Cu(II) was found to form the protonated complexes, CuHSGCR and Cu(HSGCR)(2-)(2), in weakly acidic media. SGCR is suitable as an indicator for Cu(II) in a weakly acidic solution and for Cu(II), Zn(II) and Pb(II) in alkaline solution.     

Solvent extraction of alkali metal ions with chromium complexes

Solvent extraction of alkali metal ions by batch and counter-current distribution methods was investigated with tetrathiocyanatodiamminechromate(III) and tetrathiocyanatodianilinechromate(III) as reagents and nitromethane and nitrobenzene as organic solvents. The distribution ratios of alkali metal ions in the various systems were measured. Cesium was readily extracted with the aniline compound and nitrobenzene. The separation of sodium from potassium in trace amounts was possible by the counter-current distribution method.     

Rigid ferrocenophane and its metal complexes with transition and alkaline-earth metal ions

The rigid [6]ferrocenophane, L¹, was synthesised by condensation of 1,1′-ferrocene dicarbaldehyde with trans-1,2-diaminocyclohexane in high dilution at r.t. followed by reduction. When other experimental conditions were employed, the [6,6,6]ferrocenephane (L²) was also obtained. Both compounds were characterised by single crystal X-ray crystallography. The protonation of L¹ and its metal complexation were evaluated by the effect on the electron-transfer process of the ferrocene (fc) unit of L¹ using cyclic voltammetry (CV) and square wave voltammetry (SWV) in anhydrous CH₃CN solution and in 0.1 M ⁿBu₄NPF₆ as the supporting electrolyte. The electrochemical process of L¹ between −300 and 900 mV is complicated by amine oxidation. On the other hand, an anodic shift from the fc/fc⁺ wave of L¹ of 249, 225, 81 and 61 mV was observed by formation of Zn²⁺, Ni²⁺, Pd²⁺ and Cu²⁺ complexes, respectively. Whereas Mg²⁺ and Ca²⁺ only have with L¹ weak interactions and they promote the acid-base equilibrium of L¹. This reveals that L¹ is an interesting molecular redox sensor for detection of Zn²⁺ and Ni²⁺, although the kinetics of the Zn²⁺ complex formation is much faster than that of the Ni²⁺ one. The X-ray crystal structure of [PdL¹Cl₂] was determined and showed a square–planar environment with Pd(II) and Fe(II) centres separated by 3.781(1) Å. The experimental anodic shifts were elucidated by DFT calculations on the [ML¹Cl₂] series and they are related to the nature of the HOMO of these complexes and a four-electron, two-orbital interaction.     

On-line dialysis of some metal ions and metal complexes

The effect of ionic strength, pH and complexing ligands on the dialysis of metal ions, particularly zinc(II), through cellulose acetate membranes, was studied under flow conditions. The dialysis factor, which depends on both the mass transfer and the membrane permeability, was found to be independence of ionic strength in the interaval 0.05–0.3 M and to increase only slightly with pH 4.6 and 7.0. Some common buffer constituents had no effect, but chloride and calcium ions affected the transfer rates. The rate of transfer of the ligands histidine, NTA and EDTA was of the same order of magnitude as that of the metal ions. The transfer rate of the Ni(II)-EDTA complex was the same as that of a mixture of Ni(II) and EDTA. Generally, addition of the chelating agents decreased the metal-ion transfer rates. Partition coefficients between the membrane polymer and the buffers were evaluated and compared with the dialysis factors and there were significant differences with regard to the range of variation, effect of concentration and pH-dependence. The time scale of uptake or release of metal ions by the polymer is much longer than that of a steady-state transfer in dialysis. Partition and dialysis may not be directly related to each other.     

Fluoride complexes of the alkali metal ions

Measurements by fluoride ion-selective electrode potentiometry on the very weak monofluoride complexes of the alkali metal ions in aqueous solution at 25°C and an ionic strength of 1M indicate their stability constants lie in the order Li⁺ > Na⁺ > K⁺ > Rb⁺ ? Cs⁺. Data at varying ionic strengths and temperatures were used to calculate infinite dilution stability constants and enthalpies and entropies of complexation for LiF and NaF.     

2,6-Diacetylpyridinesalicylaldazine complexes of bivalent metal ions

Summary 2,6-Diacetylpyridinesalicylaldazine (H₂daps) forms complexes [Ni(H₂daps)ClH₂O]Cl, [M(H₂daps)Cl₂H₂O] (M = Mn, Co, Cu or Zn) and [M(daps)(H₂O)₂] (M = Mn, Co, Ni, Cu or Zn) which have been characterized by elemental analyses, physicochemical methods, spectroscopy and X-ray powder diffraction.     

Polyoxometalate tri-supported transition metal complexes containing mixed-valent transition metal ions

Three compounds, [AsMo₈V₆O₄₂][Cu(2,2?-bpy)₂]₂[Cu(2,2?-bpy)]·4H₂O (1), [PMo₈V₆O₄₂][Cu(2,2?-bpy)₂]₂[Cu(2,2?-bpy)]·3H₂O (2) and [PMo₈V₆O₄₂][Cu(2,2?-bpy)₂]₂[Cu(2,2?-bpy)]·3.5H₂O (3), have been synthesized under hydrothermal conditions and characterized by IR, UV–vis, XRD, TG, elemental analysis, and X-ray diffraction analysis. Single-crystal X-ray structure analysis reveals that 1 and 2 are isostructural and isomorphous, whereas 2 and 3 are polymorphs. Polymorphs of 1 have not been synthesized yet. The mixed-valent transition metal ion in 1–3 has been further confirmed by TG analyses. Catalytic properties of 1 and 2 have also been studied.     

Stability constants of complexes of N-arylhydroxamic acids with some bivalent metal ions

Thermodynamic stability constants of complexes of Mn(II), Ni(II), Zn(II) and Cu(II) with five closely related N-arylhydroxamic acids have been determined at 25 +/- 0.1 degrees in 50% v v aqueous dioxan medium. The stabilities of the complexes mostly follow the order of the basicity of the ligands and the electron affinities of the metal ions as measured by their second ionization potential.     

The interaction of morpholine with metal ions—I: Copper complexes

The synthesis and electronic and IR spectra of CuL₂(NO₃)₂ and CuL₄(NO₃)₂, where L stands for morpholine, are described. The thermal behaviour of the complexes is also discussed. The solids contain distorted octahedral Cu(II) bonded to morpholine through nitrogen only. In aqueous solutions only the species CuL₃(aq)²⁺ is stable in the concentration range 0.5 < [L] < 2 mol dm^?3, its stability constant being log K₃ = 14.64 ± 0.15 at 25.00°C and ionic strength 1 mol dm^?3; at very high morpholine concentrations, 3.4 < [L] < 6 mol dm^?3, evidence is also found for CuL₄(aq)²⁺, the value log K₄ = 15.5 being estimated. The aggressiveness of morpholine-H₂O₂ towards metallic copper is compared with that of ammonia-H₂O₂, both on thermodynamics and kinetics grounds; experimental results seems to be dominated by kinetics factors. The relevance of these results to water treatment in secondary systems of nuclear power reactors is discussed.     

Thermal properties of some complexes of quinolinic acid with divalent metal ions

Studies of the complexes of pyridinecarboxylic acids with divalent metal ions as a function of the position of the carboxyl groups were extended. The thermal properties of the complexes of quinoline acid (pyridine-2,3-dicarboxylic acid) with several divalent metal ions were determined by thermogravimetry (TG) and differential thermal analysis (DTA). A correlation between these compounds and others obtained by reaction between the studied metal ions with similar acids (lutidinic acid (pyridine-2,4-dicarboxylic acid) and isocinchomeronic acid (pyridine-2,5-di-carboxylic acid) is discussed in terms of the position of the carboxyl group far from the aza group. The thermal stability of the metal complexes is in the order Mn(II) > Fe(II) > Zn(II) ? Co(II) > Ni(II) > Cu(II).     

Luminescent dipyrrinato complexes of trivalent group 13 metal ions

Although free dipyrrins (dipyrromethenes) do not strongly luminesce, certain dipyrrinato complexes of BF2 and zinc(II) are known to be intensely luminescent species. Two new dipyrrinato fluorophores, based on complexes with gallium(III) and indium(III), are described. Using a previously described meso-mesityl-substituted dipyrrin, namely 5-mesityldipyrrin (mesdpm), the complexes [Ga(mesdpm)3] and [In(mesdpm)3] were prepared and structurally characterized. The complexes display the expected octahedral geometry about the metal ions. In some solvents, such as hexanes, the complexes emit green light upon excitation with UV light at room temperature, with quantum yields of 2.4% ([Ga(mesdpm)3]) and 7.4% ([In(mesdpm)3]) and lifetimes in the low nanosecond range. Observations are consistent with assignment to ligand-localized transitions, and this interpretation is further confirmed by density functional calculations described herein. The new complexes are important additions to the widely used family of dipyrrin-based fluorescent species and show that dipyrrinato complexes containing metals other than BF2 and zinc(II) may be useful fluorophores.     

Urate complexes of dipositive first row transition metal ions

Summary The following complexes were prepared by reacting uric acid (uaH₂) with 3d metal(II) perchlorates in non-aqueous media: trans-[Mn(uaH)₂(OH₂)₄], octahedral, and [Co-(uaH)₂(OH₂)₂] tetrahedral, both involving O(8)-bound hydrogenurate; [Cu(ua)(OH₂)₃], tetrahedral, with the urate dianion binding via a ring nitrogen; and [Ni₂(uaH)₂-(uaH₂)(ClO₄)₂(H₂O)₃] formulated as a pentacoordinated linear polymetric species, involving bidentate bridging hydrogenurate, binding through O(8) and a ring nitrogen.Presented in part at the 4th Chemical Congress of North America (Ref. 1).     

Electricoswitchable bonding of metal ions and complexes by calixarenes

The results of authors on designing electroswitchable supramolecular systems based on calix[4]arenes, calix[4]resorcinols, and transition metal ions and complexes are summarized. We consider systems in which the switching is performed owing to electrochemical reactions both of groups grafted to the macrocycle and bound substrates. Examples of electrochemically switchable luminescence are given.     

UV and IR spectroscopy of cold 1,2-dimethoxybenzene complexes with alkali metal ions

We report UV photodissociation (UVPD) and IR-UV double-resonance spectra of 1,2-dimethoxybenzene (DMB) complexes with alkali metal ions, M(+)·DMB (M = Li, Na, K, Rb, and Cs), in a cold, 22-pole ion trap. The UVPD spectrum of the Li(+) complex shows a strong origin band. For the K(+)·DMB, Rb(+)·DMB, and Cs(+)·DMB complexes, the origin band is very weak and low-frequency progressions are much more extensive than that of the Li(+) ion. In the case of the Na(+)·DMB complex, spectral features are similar to those of the K(+), Rb(+), and Cs(+) complexes, but vibronic bands are not resolved. Geometry optimization with density functional theory indicates that the metal ions are bonded to the oxygen atoms in all the M(+)·DMB complexes. For the Li(+) complex in the S(0) state, the Li(+) ion is located in the same plane as the benzene ring, while the Na(+), K(+), Rb(+), and Cs(+) ions are located off the plane. In the S(1) state, the Li(+) complex has a structure similar to that in the S(0) state, providing the strong origin band in the UV spectrum. In contrast, the other complexes show a large structural change in the out-of-plane direction upon S(1)-S(0) excitation, which results in the extensive low-frequency progressions in the UVPD spectra. For the Na(+)·DMB complex, fast charge transfer occurs from Na(+) to DMB after the UV excitation, making the bandwidth of the UVPD spectrum much broader than that of the other complexes and producing the photofragment DMB(+) ion.     

Complexation reactions of tetrathiomolybdate ions with binuclear molybdenum and rhenium metal cluster complexes

Conclusions Syntheses are reported for previously unknown hetero- and homometallic polynuclear thio complexes, (n-Bu₄,N)₂ (Mo₆S₂₀), (n-Bu₂₄N)₂)Re₂Mo₄S₁₆), and K₄(Mo₆S₁₆).Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 1, pp. 192–194, January, 1987.