Investigation on structure and morphology of the thermally treated glassy alloy (Fe,Cr)80(P,C,Si)20 by means of ESCA and SEM/EDXA

Metallic glass ribbons of the chemical composition (Fe,Cr)₈₀(P,C,Si)₂₀ have been thermally treated in the region between 530 and 980°C for 72 h. The SEM/EDXA investigations indicate that a phase transformation takes place between 575 and 980°C in a surface layer of 5 μm thickness. Thus, a Cr-rich phase occurs between 760 and 800°C which is converted into an open-pore system between 850 and 900°C. The oxidation process reaches its maximum at 760°C. The ESCA spectra of the material in the “as received” state and of the thermally treated samples indicate that different oxygen species are formed within the analysed surface layer of 10 nm. The oxygen of the original material is incorporated as hydroxyl groups in species such as FeO(OH) and CrO(OH). After thermal treating the hydroxyl content decreases and the oxide content increases. Species of Si exist in the surface layer as SiO_x-like compounds (peak at BE=102.0 eV). A majority phase of transition metal phosphide species is coexisting with oxidised phosphate species.     

On the chemical durability of a metal-metalloid glass from the alloy (Fe,Cr)80(P,C,Si)20 in hardened Portland cement investigated by FT-IRRS, ESCA, and SEM/EDX

Composites of metal-metalloid glass fibres FIB-RAFLEX^TM (Fe,Cr)₈₀(P,C,Si)₂₀ with ordinary Portland cement (OPC) were prepared and used for an accelerated ageing procedure to study the cement paste-fibre interfaces which affect the mechanical behaviour of concrete composites. The role of the interface on the global behaviour of the concrete composite as a basis for the development of high-performance cementitious materials was studied on pulled out fibres by EDX, ESCA and by FTIR/RAMAN microspectroscopy. A Ca(OH)₂ rich layer is predominant for the surface of the reinforced cementitious material and represents the interface between aggregate and matrix. The interaction between aggregate and matrix is the reason for the strength of composites with this fibre in the highly alkaline environment of hydrating cements.     

A SEM/EDXA study on the chemical attack of aqueous NaOH/KOH solutions on the surface of the metal-metalloid glass (Fe, Cr)80 (P, C, Si)20 and Fe75Cr5P8C10Si2, respectively

After a treatment of the metal-metalloid glassy alloy (Fe, Cr)₈₀ (P, C, Si)₂₀ and Fe₇₅Cr₅P₈C₁₀Si₂, respectively, by aqueous alkaline solutions of 1.0M NaOH + 1.0M KOH and 2.5M NaOH + 2.5M KOH, respectively, a SEM/EDXA study of the glass surface was performed.The results of the accelerated ageing procedure demonstrate that the glass treated with the 1.0M NaOH + 1.0M KOH solution at room temperature (20 °C) is characterized by a surface state like that of the initial material.For the glass treatment with the 2.5M NaOH + 2.5M KOH solution at 20 °C the surface layer shows a different morphology and is thicker. It can be supposed that the reinforcing property is reduced.The glass treatment at 80 °C with the aqueous solutions 1.0M and 2.5M (NaOH + KOH), respectively, leads to surface layers of different morphology and such a layer is about 5 m thick. The strength of solid residue of such a treated glass is very low.Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

On the chemical durability of a metal-metalloid glass from the alloy (Fe,Cr)80(P,C,Si)20 in hardened Portland cement investigated by FT-IRRS,ESCA, and SEM/EDX

Composites of metal-metalloid glass fibres FIB-RAFLEX^TM (Fe,Cr)₈₀(P,C,Si)₂₀ with ordinary Portland cement (OPC) were prepared and used for an accelerated ageing procedure to study the cement paste-fibre interfaces which affect the mechanical behaviour of concrete composites. The role of the interface on the global behaviour of the concrete composite as a basis for the development of high-performance cementitious materials was studied on pulled out fibres by EDX, ESCA and by FTIR/RAMAN microspectroscopy. A Ca(OH)₂ rich layer is predominant for the surface of the reinforced cementitious material and represents the interface between aggregate and matrix. The interaction between aggregate and matrix is the reason for the strength of composites with this fibre in the highly alkaline environment of hydrating cements.     

Protolyses of (CH3)3SnM(CH3)3 (M = Sn,Ge, Si,C)

Product and kinetic studies on the reactions of hydrogen chloride in methanol solution with the substrates (CH₃)₃SnM(CH₃)₃ (M = Sn; Ge and Si) show that both SnM and SnCH₃ cleavage reactions occur, at similar rates, and are followed by other reactions giving complex but explicable mixtures of products. Similar behaviour is observed for trifluoroacetolysis in carbon tetrachloride solution, and some intermediates are observable. Trifluoroacetolysis of (CH₃)₃SnC(CH₃)₃ results in exclusive SnCH₃ cleavage. The very slow apparent solvolysis in acetic acid solution is thought to involve reaction with dissolved oxygen.     

Anion effect on the thermolysis of double complexes [Co(NH3)6][Fe(CN)6] and [Co(NH3)6]4[Fe(CN)6]3

The thermolysis of complexes [Co(NH₃)₆][Fe(CN)₆] and [Co(NH_{3 6}]₄[Fe(CN)₆]₃ under an air or hydrogen atmosphere at 200, 350, and 500°C is studied. The composition and properties of thermolysis products are determined. The oxidative thermolysis yields mixtures of oxides of the central metals; the reductive thermolysis yields intermetallic compounds CoFe. The density of the complexes and the specific surface area of the intermetallic compounds are measured. Average particle sizes are calculated. The morphology and dispersion of the powders are dictated by the shape and density of the crystals of the precursor double salts and the thermolysis temperature. The thermolysis chemism in the oxidative and reductive atmospheres is discussed in the context of the nature of the complex anion. Original Russian Text ? S.I. Pechenyuk, D.P. Domonov, D.L. Rogachev, A.T. Belyavskii, 2007, published in Zhurnal Neorganicheskoi Khimii, 2007, Vol. 52, No. 7, pp. 1110–1115.     

Crystal structure of [Pd(P(i-Pr)3)2(acac)]BF4

A single crystal X-ray diffraction study is carried out for [Pd(P(i-Pr)₃)₂(acac)]BF₄, T = 150(2) K. Crystal data: a = 10.2935(4) ?, b = 11.3591(5) ?, c = 13.8728(6) ?, α = 89.154(2)°, β = 68.448(1)°, γ = 85.032(1)°, P-1 space group, V = 1502.75(11) ?³, Z = 2, d _x = 1.354 g/cm³.     

The crystal structure of N-sodiohexamethyldisilazane,Na[N{Si(CH3)3}2]

The crystal structure of Na[N{Si(CH₃)₃}₂] has been determined from single-crystal x-ray diffraction data collected by counter methods. N-sodiohexamethyldisilazane crystallizes in the mono-clinic space group p21/n with unit cell parameters $\text{a}$ = 9.426(3), $\text{b}$ = 6.921(3), c = 17.974(5)Å, β = 93.83(2)°, and ?_calc = 1.04 g cm^?3 for z = 4 formula units. Least-squares refinement gave a final conventional R value of 0.034 for 1244 independent observed reflections. In the solid state the compound exists in a polymeric arrangement with an average Na-N distance of 2.355(4)Å. The methyl group are configured such that the angle of rotation of the trimethylsilyl moiety about the Si-N bond is 30° from the eclipsed position. The Si-N bond length is 1.690(5)Å, and the Si-N-Si bond angle is 125.6(1)°.     

The production of Cr(NH3)6 from the acid catalysed hydrolysis of Cr(NH3)5(NCO)

The rate of the reaction

has been investigated at 40–65°C with [HClO₄] varying from 0.04 to 0.6 M (μ = 0.6 M, NaClO₄). The observed rate law has the form: -d[Cr(NH₃)₅(NCO)²⁺]/dt = k_obs[Cr(NH₃)₅(NCO)²⁺] where k_obs = a[H+]²{1 + b[H⁺]²} and ^?1 at 55.0°C, a = 0.36 M^?1 s^?2 and b = 6.9 × 10^?3 M^?1 s^?1. The rate of loss of Cr(NH₃)₅(NCO)²⁺ increases with increasing acidity to a limiting value (at [H⁺] ～ 0.5 M) but the yield of Cr(NH₃)₆³⁺ decreases with increasing [H⁺] and increases with increasing temperature. In the kinetic studies the maximum yield of Cr(NH₃)₆³⁺ was 35% but a synthetic procedure has been developed to give a 60% yield.     

A new and unusual isomerism in [Fe(CO)2 {P(OR)3}2 (SO2)] complexes (R = aryl)

[Fe(CO)₂ {P(OR)₃}₂ (SO₂)] complexes (R = aryl) exist in solution as equilibrium mixtures of two isomers; both have been shown by X-ray diffraction studies (where R = Ph or o-MeC₆H₄) to have planar coordination about SO₂ and trigonal bipyramidal coordination about Fe, but in one isomer (R = Ph) the equatorial plane is occupied by SO₂ and two CO ligands whilst in the other one (R = o-MeC₆H₄) it is occupied by the SO₂ and two P ligands.     

Qualitative structure of (CO2)2 and (OCS)2

Molecular beam deflection studies on (CO₂)₂ and (OCS)₂ indicate that both these species are polar molecules. Structural implications of this are explored in light of previous studies of these systems.     

Structural study of Mn2(CO)8[P(NMe2)3]2

An X-ray crystal structure determination for the bimetallic complex Mn₂(CO)₈-[P(NMe₂)₃]₂ reveals that the P(NMe₂)₃ ligands are trans to the Mn---Mn bond and the Mn---Mn bond distance is relatively long, 2.946(1) Å.     

Crystal structure and magnetic property of spin crossover complex Fe(3-phenylpyridine)2[Au(CN)2]2

A novel two-dimensional network bimetallic Fe Au spin crossover coordination polymer based on 3-phenylpyridine-coordinated iron centers and linear gold cyanide bridges {Fe(3-phenylpyridine)₂[Au(CN)₂]₂}_n (1), has been synthesized. The compound is characterized by elemental analysis, IR, single-crystal X-ray analysis at 300 and 90 K and magnetic measurements. The Fe^II ions in 1 have octahedral Fe^IIN₆ coordination geometries, which are linked by [Au(CN)₂]⁻ units at the equatorial plane to form a polymeric 2D sheet architecture. The two pyridine rings coordinate in axial position. Variable-temperature (2-300 K) magnetic susceptibility measurements of 1 were performed to determine the spin transition behavior. SQUID data show that high and low spin states exist in a 1:1 ratio at 90 K. However, only one kind of Fe^II atom is apparent crystallographically at 90 K, indicating that the high and low spin sites are disordered in the polymeric 2D framework.     

Hetero- and homo-nuclear bimetallic ruthenol complexes by dehydrogenative metallacyclization of Ru(CO)3(bi-1,7-cyclooctadienyl), preparation and x-ray structure of Fe(CO)3(C16H22), RuFe(CO)6(C16H22) and Ru2(CO)6(C16H20)

The reaction of M₃(CO)₁₂ (M = Ru, Fe) with excess bi-2,7-cyclooctadienyl (C₁₆H₂₂) 1 gave a mononuclear complex M(CO)₃(1,2,1′-2′-η⁴-C₁₆H₂₂), 2a (M = Ru) or 3a (M = Fe), in good yield. Treatment of 2a with Fe₃(CO)₁₂ or reaction of 3a with Ru₃(CO)₁₂ gave the heterobimetallic complex RuFe(CO)₆(C₁₀H₂₂) consisting of a ruthenacyclopentadiene unit coordinated to an Fe(CO)₃ fragment, as confirmed by ¹H NMR and X-ray studies. The corresponding homobimetallic complex Ru₂(CO)₆(C₁₆H₂₂) was obtained from the 1:1 reaction of 2a with Ru₃(CO)₁₂, while the direct reaction of 1 with Ru₃(CO)₁₂ gave Ru₂(CO)₆(C₁₆H₂₀) preferentially with a loss of two hydrogen atoms. The pathway for formation of these bimetallic complexes was interpreted as a dehydrogenative metallacyclization followed by hydrogen transfer.     

Spin transition in [Fe(phen)2(NCS)2] and [Fe(bipy)2(NCS)2]: Hysteresis and effect of crystal quality

Detailed magnetic susceptibility measurements on the polycrystalline complexes [Fe(phen)₂(NCS)₂] (phen = 1.10-phenanthroline) and [Fe(bipy)₂(NCS)₂] (bipy = 2,2′-bipyridine) have revealed a narrow hysteresis in both systems indicative of a first-order nature of the spin transition ⁵T_2g(O_h) ? ¹ A_tg(O_h). The crystal quality, in particular crystal defects (through preparation or grinding), have been shown to influence strongly the spin transition behaviour.     

Platinumolefin bond strength in Pt(PPh3)2(CH2CH2) and Pt(PPh3)2 {C(CN)2C(CN)2}

The enthalpy of the reaction: Pt(PPh₃)₂ (CH₂CH₂)(cryst.) + C(CN)₂C(CN)₂ (g) → Pt(PPh₃)₂ {C(CN)₂C(CN)₂}(cryst.) + CH₂ CH₂ (g) has been determined as ΔH₂₉₈=?155.8±8.0 kJ·mol^?1, from solution calorimetry. The interpretation, that the platinumethylene bond is much weaker than the platinumtetracyanoethylene bond, is contrary to conclusions drawn recently from electron emission spectroscopic studies, but in agreement with available structural data.     

Synthesis and structure of a novel complex [LCo(OH)2(HCO3)CoL]2[(NC)5Cr(CN)Cr(CN)2].4H2O

A novel complex containing a (μ-bicarbonato)-bis(μ-hydroxo)dicobalt(II) cation and a (μ-cyano)dichromium(III) anion has been obtained and characterized by single crystal X-ray diffraction. The cations have a confacial bioctahedral structure and the anion contains an octahedral Cr(CN)₆³⁻ unit bridging to the second Cr which has trigomal planar geometry.     

Spectroscopic properties of guanidinium zinc sulphate [C(NH2)3]2Zn(SO4)2 and ab initio calculations of [C(NH2)3]2 and HC(NH2)3

Raman and FTIR spectra of guanidinium zinc sulphate [C(NH₂)₃]₂Zn(SO₄)₂ are recorded and the spectral bands assignment is carried out in terms of the fundamental modes of vibration of the guanidinium cations and sulphate anions. The analysis of the spectrum reveals distorted SO₄²⁻ tetrahedra with distinct S–O bonds. The distortion of the sulphate tetrahedra is attributed to Zn–O–S–O–Zn bridging in the structure as well as hydrogen bonding. The CN₃ group is planar which is expressed in the twofold symmetry along the C–N (1) vector. Spectral studies also reveal the presence of hydrogen bonds in the sample. The vibrational frequencies of [C(NH₂)₃]₂ and HC(NH₂)₃ are computed using Gaussian 03 with HF/6-31G* as basis set.     

35Cl NQR and 1H NMR studies of [C(NH2)3]AuCl4, [C(NH2)3]2PtCl4, and [C(NH2)3]2PdCl4

The temperature dependence measurements of ³⁵Cl NQR frequencies and ¹H NMR spin-lattice relaxation time T₁ were carried out for guanidinium tetrachloro-aurate(III), -platinate(II), and -palladate(II). The gold(III) complex showed four NQR lines at various temperatures between 77 and 344 K, while the platinum-(II) and palladium(II) complexes gave two NQR lines in the temperature ranges 77–169 K and 77–220 K, respectively. An unusual phase transition was located at 363 K for the gold(III) complex. The high-temperature phase was easily supercooled. All the complexes studied yielded a T₁ minimum attributable to the reorientation of the planar cation about its C₃ axis. The motional parameters were evaluated. The Zeeman-quadrupole cross relaxation between protons and chlorine nuclei was observed for the platinum(II) and palladium(II) complexes at various temperatures below room temperature, while it was also detected for the high-temperature phase of the gold(III) complex.     

Synthesis and reactivity of [(RRN)2PH]Fe(CO)4 complexes. X-ray crystal structure of [(Ph2N)2PH]Fe(CO)4

KHFe(CO)₄ reacts with tris(amino)phosphines by substitution at phosphorus leading to [bis(amino)phosphine]tetracarbonyliron complexes [(R¹R²N)₂PH]Fe(CO)₄. The X-ray structure has been determined for R¹=R²=Ph. Deprotonation of these complexes with KH affords stable potassium phosphidotetracarbonylferrates which can be alkylated or acylated at phosphorus.