Spin-polarized transport in a normal/ferromagnetic/normal zigzag graphene nanoribbon junction

We investigate the spin-dependent electron transport in single and double normal/ferromagnetic/normal zigzag graphene nanoribbon (NG/FG/NG) junctions. The ferromagnetism in the FG region originates from the spontaneous magnetization of the zigzag graphene nanoribbon. It is shown that when the zigzag-chain number of the ribbon is even and only a single transverse mode is actived, the single NG/FG/NG junction can act as a spin polarizer and/or a spin analyzer because of the valley selection rule and the spin-exchange field in the FG, while the double NG/FG/NG/FG/NG junction exhibits a quantum switching effect, in which the on and the off states switch rapidly by varying the cross angle between two FG magnetizations. Our findings may shed light on the application of magnetized graphene nanoribbons to spintronics devices.     

Fano Factor in Strained Graphene Nanoribbon Nanodevices

We investigate the Fano factor in a strained armchair and zigzag graphene nanoribbon nanodevice under the effect of ac fheld in a wide range of frequencies at different temperatures(10 K-70 K). This nanodevice is modeled as follows: a graphene nanoribbon is connected to two metallic leads. These two metallic leads operate as a source and a drain. The conducting substance is the gate electrode in this three-terminal nanodevice. Another metallic gate is used to govern the electrostatics and the switching of the graphene nanoribbon channel. The substances at the graphene nanoribbon/metal contact are controlled by the back gate. The photon-assisted tunneling probability is deduced by solving the Dirac eigenvalue differential equation in which the Fano factor is expressed in terms of this tunneling probability. The results show that for the investigated nanodevice, the Fano factor decreases as the frequency of the induced ac fheld increases, while it increases as the temperature increases.In general, the Fano factors for both strained armchair and zigzag graphene nanoribbons are different. This is due to the effect of the uniaxial strain. It is shown that the band structure parameters of graphene nanoribbons at the energy gap, the C-C bond length, the hopping integral, the Fermi energy and the width are modulated by uniaxial strain. This research gives us a promise of the present nanodevice being used for digital nanoelectronics and sensors.     

The investigation on the electronic structures of hybrid GNR-ZnO

To investigate the modification of graphene for a good semiconductor performance, the model of graphene nanoribbon (GNR) and the model of hybrid GNR-ZnO are presented, respectively. The electronic structures such as band structure, density of electronic states (DOS) are investigated by using first-principles calculations based on density functional theory. The results show that the ZnO has direct contribution to the formation of valence band with the composites, which changes the properties of graphene; the adsorption of ZnO nanostructure has an impressive impact on the graphene nanoribbon, which causes the band gap of the composite to become narrower than that of intrinsic graphene nanoribbon. In terms of the graphene nanoribbon, its differentiation of 2p state weakens gradually from the marginal zone to the central region. The mechanism of electronic structure of the graphene nanoribbon and hybrid GNR-ZnO is also discussed to give a further explanation for the change. The results provide a potential way to improve the properties of intrinsic graphene and enhance the controllability of graphene-based materials structure.     

石墨烯纳米带的制备与电学特性调控

石墨烯由于其独特的晶体结构展现出了特殊的电学特性,其导带与价带相交于第一布里渊区的六个顶点处,形成带隙为零的半金属材料,具有优异的电子传输特性的同时也限制了其在电子学器件中的使用.因而科研人员尝试各种方法来打开其带隙并调控其能带特性,主要有利用缺陷、应力、掺杂、表面吸附、结构调控等手段.其中石墨烯纳米带由于量子边界效应和限制效应,存在带隙.本综述主要介绍了制备各类石墨烯纳米带的方法,并通过精确调控其细微结构,从而对其进行精确的能带调控,改变其电学特性,为其在电子学器件中的应用提供一些可行的方向.     

含Stone-Wales缺陷zigzag型石墨烯纳米带的电学和光学性能研究

本文采用基于密度泛函理论的第一性原理对zigzag型石墨烯纳米带中含有不同Stone-Wales缺陷的电子结构特性和光学性能进行研究. 考虑了两种模型:不计电子自旋和考虑电子自旋的情况.研究发现:不计电子自旋情况下,含对称Stone-Wales缺陷的石墨烯纳米带在缺陷区域出现了凹凸不平的折皱构型,两种不同的Stone-Wales缺陷都引起了电荷的重新分布.考虑电子自旋时,Stone-Wales缺陷的引入对石墨烯纳米带自旋密度有显著影响,也引起了不同自旋的电子态密度的变化.进一步研究了纳米带的光学性能,发现 关键词： 石墨烯纳米带 Stone-Wales缺陷 电子结构 光学性能     

BN链掺杂的石墨烯纳米带的电学及磁学特性

基于密度泛函理论第一性原理系统研究了BN链掺杂石墨烯纳米带(GNRs)的电学及磁学特性, 对锯齿型石墨烯纳米带(ZGNRs)分非磁态(NM)、反铁磁态(AFM)及铁磁性(FM)三种情况分别进行考虑. 重点研究了单个BN链掺杂的位置效应. 计算发现: BN链掺杂扶手椅型石墨烯纳米带(AGNRs) 能使带隙增加, 不同位置的掺杂, 能使其成为带隙丰富的半导体. BN链掺杂非磁态ZGNR的不同位置, 其金属性均降低, 并能出现准金属的情况; BN链掺杂反铁磁态ZGNR, 能使其从半导体变为金属或半金属(half-metal), 这取决于掺杂的位置; BN链掺杂铁磁态ZGNR, 其金属性保持不变, 与掺杂位置无关. 这些结果表明: BN链掺杂能有效调控石墨烯纳米带的电子结构, 并形成丰富的电学及磁学特性, 这对于发展各种类型的石墨烯基纳米电子器件有重要意义. 关键词： 石墨烯纳米带 BN链掺杂 输运性质 自旋极化     

基于石墨烯纳米带的齿形表面等离激元滤波器的研究

提出了一种基于石墨烯纳米带的齿形表面等离激元波导滤波器, 并且用时域有限差分法研究了这种结构. 单个齿形的滤波器可以实现带阻滤波, 其滤波特性可以用基于散射矩阵的解析模型解释. 滤波器的透射谱特性可以通过调节齿的长度、宽度以及石墨烯的化学势来改变. 由于石墨烯的化学势可以用门电路来调节, 这种结构的滤波器可以在器件加工完成后灵活地调节其工作波长. 同时研究了多齿滤波器, 这种结构可以实现宽带滤波, 文中对具有不同齿数、周期的滤波器的透射谱进行了细致的研究. 研究结果对实现基于石墨烯的大规模集成光电子器件提供了重要的理论参考.     

Spin thermopower and thermoconductance in a ferromagnetic graphene nanoribbon

The spin thermoelectric properties of a zigzag edged ferromagnetic (FM) graphene nanoribbon are studied theoretically by using the non-equilibrium Green's function method combined with the Landauer-Büttiker formula. By applying a temperature gradient along the ribbon, under closed boundary conditions, there is a spin voltage ΔV(s) inside the terminal as the response to the temperature difference ΔT between two terminals. Meanwhile, the heat current ΔQ is accompanied from the 'hot' terminal to the 'cold' terminal. The spin thermopower S?=?ΔV(s)/ΔT and thermoconductance κ?=?ΔQ/ΔT are obtained. When there is no magnetic field, S versus E(R) curves show peaks and valleys as a result of band selective transmission and Klein tunneling with E(R) being the on-site energy of the right terminal. The results are in agreement with the semi-classical Mott relation. When |E(R)|??M, the quantized value of [Formula: see text] appears. In the quantum Hall regime, because Klein tunneling is suppressed, S peaks are eliminated and the quantized value of κ is much clearer. We also investigate how the thermoelectric properties are affected by temperature, FM exchange split energy and Anderson disorder. The results indicate that S and κ are sensitive to disorder. S is suppressed for even small disorder strengths. For small disorder strengths, κ is enhanced and for moderate disorder strengths, κ shows quantized values.     

A graphene quantum dot realized by an armchair graphene nanoribbon with line defect

The electron transport in a semiconducting armchair graphene nanoribbon with line defect is theoretically investigated, by coupling it to two normal metallic leads. It is found that the line defect induces a new localized quantum state near the Dirac point, and that the coupling between this state and the leads provides a channel for the resonant tunneling. This means that such a finite‐size nanoribbon can be viewed as a quantum dot. When two line defects are present simultaneously, a coupled quantum dot forms, leading to the splitting of the conductance peaks. With these results, we propose such a structure to be a promising candidate of an electron transistor. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Controllable tuning of the electronic transport in pre-designed graphene nanoribbon

We make use of ab initio density functional theory calculation to explore the electronic and transport properties of zigzag-edged graphene nanoribbon (ZGNR) with peculiar designed electronic transport channels by tailoring the atomic configuration of the nanostructure. Tailoring the atomic structure has significant influences on the electronic transport of the defective nanostructure, and eventually the metal-semiconducting transition are identified with the increasing number of missing atoms. Our results demonstrate that pre-designed graphene nanoribbon by selective tailoring with high precision is expected to be served as the basic component for nanoelectronic device.     

Electron transport of step-shaped graphene nanoribbon

In this work, we report a theoretical study of the electronic transport through a step-shaped graphene nanoribbon by the tight-binding method. We found that the conductance suppression near the Dirac point is pervasive, and the top boundary configuration is irrelevant; this arises from the antiresonance effect associated with an edge state localized at the transition edge of the top layer of graphene nanoribbon. In addition, the conductance can be easily tuned from zero to unity by a gate bias in the bilayer graphene nanoribbon, this feature will help us to realize the electric nanoswitch.     

石墨烯纳米带电子结构的紧束缚法研究

在推导出的一般复式格子的π电子紧束缚能量色散关系的基础上,通过假定石墨烯纳米带的电子横向限制势为无穷大硬壁势,导出石墨烯纳米带的能量色散关系及石墨烯纳米带或为金属或为半导体的条件.结果表明：石墨烯纳米带的电子结构与其几何构型（对称性及宽度）密切相关,所以通过控制几何构型,可将其调制成金属或不同带隙的半导体.这意味着石墨烯纳米带对于发展新型纳米器件具有重要意义. 关键词： 石墨烯纳米带 复式格子 紧束缚模型 电子结构     

Quantum capacitance of the armchair-edge graphene nanoribbon

The quantum capacitance, an important parameter in the design of nanoscale devices, is derived for armchair-edge single-layer graphene nanoribbon with semiconducting property. The quantum capacitance oscillations are found and these capacitance oscillations originate from the lateral quantum confinement in graphene nanoribbon. Detailed studies of the capacitance oscillations demonstrate that the local channel electrostatic potential at the capacitance peak, the height and the number of the capacitance peak strongly depend on the width, especially a few nanometres, of the armchair-edge graphene nanoribbon. It implies that the capacitance oscillations observed in the experiments can be utilized to measure the width of graphene nanoribbon. The results also show that the capacitance oscillations are not seen when the width is larger than 30 nm.     

氢化与非氢化石墨烯纳米条带的密度泛函研究

基于密度泛函理论的第一性原理计算方法,研究了宽度N=8的边缘氢化和非氢化条带的结构和电子性质. 研究表明,扶手形无氢化石墨纳米条带的边缘碳原子是以三重键相互结合,它在边缘的成键强度比氢化时要高,具有更强的化学活性,可作为纳米化学传感器的基础材料. 能带结构计算表明,无论是扶手形条带还是锯齿形条带,它们都是具有带隙的半导体,且无氢化条带的带隙要比氢化的条带带隙宽度大,氢化对于条带的电子性质具有显著修饰作用. 通过锯齿形石墨纳米条带顺磁性、铁磁性和反铁磁性的计算,发现反铁磁的状态最稳定,并且边缘磁性最强,这有利于条带在自旋电子器件中的应用. 关键词： 石墨纳米条带 成键机理 电子结构 自旋分布     

Numerical study of localization length in disordered graphene nanoribbons

In this work, we study quantum transport properties of a defective graphene nanoribbon (DGNR) attached to two semi-infinite metallic armchair graphene nanoribbon (AGNR) leads. A line of defects is considered in the GNR device with different configurations, which affects on the energy spectrum of the system. The calculations are based on the tight-binding model and Green’s function method, in which localization length of the system is investigated, numerically. By controlling disorder concentration, the extended states can be separated from the localized states in the system. Our results may have important applications for building blocks in the nano-electronic devices based on GNRs.     

掺杂三角形硼氮片的锯齿型石墨烯纳米带的磁电子学性质

利用基于密度泛函理论的第一性原理方法,研究了三角形BN片掺杂的锯齿型石墨烯纳米带(ZGNR)的磁电子学特性.研究表明:当处于无磁态时,不同位置掺杂的ZGNR都为金属;当处于铁磁态时,随着杂质位置由纳米带的一边移向另一边时,依次可以实现自旋金属-自旋半金属-自旋半导体的变化过程,且只要不在纳米带的边缘掺杂,掺杂的ZGNR就为自旋半金属;当处于反铁磁态时,在中间区域掺杂的ZGNR都为自旋金属,而在两边缘掺杂的ZGNR没有反铁磁态.掺杂ZGNR的结构稳定,在中间区域掺杂时反铁磁态是基态,而在边缘掺杂时铁磁态为基态.研究结果对于发展基于石墨烯的纳米电子器件具有重要意义.     

石墨烯纳米结构的制备及带隙调控研究

石墨烯在未来微电子学领域有极大的应用前景,但是其零带隙的特点阻碍了石墨烯在半导体领域的应用.研究发现,打开室温下可用的石墨烯带隙所需要的石墨烯纳米结构尺度在10 nm以下,这一尺度的纳米结构一方面制备比较困难,另一方面器件可承载的驱动电流较小.因此,如何实现亚10 nm石墨烯纳米结构的有效加工以及如何在有效调控带隙的基础上增大石墨烯器件可承载的驱动电流,还需要进一步的研究.本文首先研究了利用聚甲基丙烯酸甲酯/铬(PMMA/Cr)双层结构工艺,通过刻蚀时间的控制,利用电子束曝光及刻蚀工艺实现了亚10 nm石墨烯纳米结构的可控制备.同时设计并制备了单排孔石墨烯条带结构,该结构打开的带隙远大于相同特征宽度石墨烯纳米带所能打开带隙的大小.该结构在有效打开石墨烯带隙的同时,增加了石墨烯纳米结构可以承载的驱动电流,有利于石墨烯在未来微电子领域的应用.     

Modeling of lightly-doped drain and source contact with boron and nitrogen in graphene nanoribbon

Graphene, a monolayer carbon atoms arranged in hexagonal honeycomb lattice possesses impressive electronic properties. It is utilized as channel, source and drain contact in graphene nanoribbon field-effect transistor (GNRFET). Zigzag graphene nanoribbon (ZGNR) is used as semi-metallic drain and source terminal to a pristine armchair graphene nanoribbon (AGNR) that acts as a semiconducting channel. In addition, a single dopant, either nitrogen or boron is added to create lightly-doped drain and source contact. The electronic properties of graphene nanoribbon (GNR) with lightly-doped drain and source contacts are obtained from tight-binding approach. With self-energy matrices, the lightly-doped contacts Hamiltonian matrices are combined with the pristine channel Hamiltonian matrix. The density of states (DOS) are simulated based on the non-equilibrium Green's Function (NEGF) formalism. Our findings are then compared with published research work. Furthermore, it is demonstrated that the DOS of the overall GNR structure still retain a small band gap and possess semiconducting properties when the channel is connected to semi-metallic contact at the drain and source terminal.     

基于石墨烯电极的蒽醌分子器件开关特性

研究了基于石墨烯电极的蒽醌分子器件的开关特性.分别选取了锯齿型和扶手椅型的石墨烯纳米带作为电极,考虑蒽醌基团在氧化还原反应下的两种构型,即氢醌(HQ)分子和蒽醌(AQ)分子,构建了双电极分子结,讨论了氧化还原反应和不同的电极结构对蒽醌分子器件开关特性的影响.研究发现,无论是锯齿型石墨烯电极还是扶手椅型石墨烯电极,HQ构型的电流都明显大于AQ构型的电流,即在氧化还原反应下蒽醌分子呈现出显著的开关特性.同时,当选用锯齿型石墨烯电极时其开关比最高能达到3125,选用扶手椅型石墨烯电极时开关比最高能达到1538.此外,当HQ构型以扶手椅型石墨烯为电极时,在0.7-0.75 V之间表现出明显的负微分电阻效应.因此该系统在未来分子开关器件领域具有潜在的应用价值.     

Thermal transport in four-terminal graphene nano-junctions

The thermal transport properties of four-terminal graphene nano-junctions (FGNJs) consisting of semi-infinite armchair-edged nanoribbon and zigzag-edged nanoribbon were calculated. The thermal transport in FGNJs is sensitive to their geometric shape. The thermal conductance of FGNJs depends on the width of semi-infinite graphene nanoribbons and center region. These thermal transport phenomena can be explained by analyzing the phonon transmission coefficient. Compared with previous thermal rectifiers, reverse modulation can be obtained by changing the width of the thermal terminal. The results provide significant physical models and theoretical validity in designing the thermal devices based on the graphene nano-junctions.