共查询到16条相似文献,搜索用时 62 毫秒
1.
2.
3.
4.
5.
6.
在光电成像系统中,动态调制传递函数受到光学系统波像差、探测组件信号分辨率及传递特性以及载体运动引起图像模糊等环节对图像质量的综合影响,成为光电成像系统的重要参数之一。论文基于光电成像系统动静态调制传递函数的测试原理,研制一种动态调制传递函数测量装置,其中光学准直系统焦距为10 000 mm,运动目标速度控制范围达到30 mm/s~5 000 mm/s,满足长焦距光电成像系统的动态调制传递函数测试。利用该装置进行了一系列的实验研究,结果表明,动态调制传递函数测量重复性优于0.01,测量不确定度达到U=0.05(k=2)。 相似文献
7.
为了实现光电经纬仪动态测角精度随机误差的检测,进一步提高光电经纬仪的检测能力,进行了光电经纬仪动态测角精度随机误差的研究。基于布尔萨坐标转换原理,通过严格理论推导,得到动靶标方位值和俯仰值的理论公式。以光电经纬仪的方位角A、俯仰角E以及采样时间t等基本参数为基础,结合动靶标方位值和俯仰值的理论公式,得到A和E的理论真值,再与光电经纬仪测得值A和E进行比较,得到光电经纬仪动态测角精度随机误差。提出一种检测光电经纬仪的动态测角精度随机误差的新方法,为光电经纬仪动态测角精度随机误差的测量提供了新的思路。 相似文献
8.
9.
高分辨率CCD相机的动态传递函数测试设备主要用在实验室条件时使用,模拟相机在飞行状态时地面景物的空间运动轨迹,综合评价相机系统在自身动态像移补偿、偏流角控制下的成像质量。与传统的静态传递函数相比,该项指标能够更好地反映CCD相机在实际工作状态下的成像质量。以动态传递函数测试的基本原理为基础,提出了系统中的关键测试设备—动态目标发生器的研制思路,并对设备的测试精度进行了分析,得到了动态目标发生器光学/机械系统的工程化设计方案。 相似文献
10.
近红外光谱法成分检测因其检测方法的优越性,已成为生物医学领域的研究热点。目前国内外相关研究虽然广泛,可是还没有进入实际临床应用的报道。关键是现有检测方法中存在着个体差异,测量条件的影响,使光谱检测精度达不到要求,因此提高检测精度是血液成分无创检测得以实现的关键。文章在最近提出的一种新的近红外血液成分检测方法-动态光谱法的基础上,利用传统的统计处理方法,通过剔除含有粗大误差的奇异点和多次测量统计平均来提高动态光谱检测精度。实验结果表明含粗大误差的奇异点剔除和多次测量统计平均能够提高动态光谱的检测精度。 相似文献
11.
12.
Ultrasound of time average acoustic intensities between 0.5 and 3 W cm−2 is widely used in physiotherapy. A simple device for semiquantitative checking of output power and beam shape has been designed. The beam tester consists of an absorbing plate and a sheath liquid crystal thermometer for temperature distribution display.1 The ultrasonic beam is fed to the absorber through a simple water tank. 相似文献
13.
14.
Hiroyuki Kawano Haruhiko Shimoji Shoji Yoshikawa Katsumasa Miyatake Kazumori Hama Shuji Nakamura 《Optical Review》2008,15(2):110-117
We developed a technique for measuring the intensity distribution of a point image in sub-pixel resolution even after assembly
of a lens and an image sensor, which is especially suitable for defocus adjustment of a star sensor used to determine the
attitude of a spacecraft. The star sensor optical system is usually aligned in a defocused position to calculate the luminance
centroid of a star image in sub-pixel resolution. In the measurement technique, the point image is carefully scanned around
a certain pixel on the image sensor, and the intensity change of the pixel is recorded during the scanning. We applied this
technique to the alignment of our star sensor’s optical system, and we were able to suppress the spot size in a range between
1.2 and 2.2 pixels at 1/e2 diameter at a certain defocus position, making it appropriate for luminance centroid calculation. 相似文献
15.