非同类机极小化最大完工时间的保密排序问题（英文）

提出并研究了一类非同类机的极小化最大完工时间的保密排序问题Rm||Cmax.该问题的模型参数分为若干组,每个组都由一个不愿意共享或公开自己数据的单位所拥有.基于随机矩阵变换构造了一个不泄露私有数据且与原问题等价的安全规划模型,求解该安全模型可以获得问题的最优解,而且各单位的隐私数据仍然保持不被泄露.     

极小化最大提前完工时间的两平行机排序问题

讨论了在两台同型平行机上,加工带截止期限的n个工件,在机器可空闲条件下,确定一个工件排序,使得最大提前完工时间最小.由于工件不允许延迟,问题可能会无可行排序.先讨论问题的可行性,通过子集和问题归约,证明了判定问题的可行性是NP-complete的.如果问题可行,接着讨论了问题的复杂性,通过划分问题归约,证明了其是NP-complete的.最后,考虑了工件加工时间相等的特殊情形,提出了一个算法在多项式时间内获得最优排序.     

极小化总完工时间的同时加工排序

讨论了并行工件同时加工排序问题,即n个同时到达的工件在m台批处理机上排序的问题.批处理机一次最多能加工B个工件.每批的加工时间等于该批中所含工件的加工时间的最大者.主要考虑B n的特殊情况,即每批可包含任意多个工件,目标函数是极小化总完工时间.首先对同型批处理机的情况给出了动态规划算法,算法的运行时间为O(m nm+1),并进一步将结论推广到同类批处理机的情况.     

加工时间可控和恶化的单机最大完工时间排序

本文研究加工时间可控并随开工时间简单线性增长的单机最大完工时间排序问题.该问题将加工时间可控排序和加工时间恶化排序两类研究连接到一起.通过比较技术证明了该问题存在满足以下性质的最优解:每个工件的加工时间或者完全压缩,或者完全不压缩;加工时间完全压缩的工件的顺序由一个工件参数和控制变量的函数的递增序给出,完全不压缩的工件在完全压缩的工件之后以任意序加工.通过将问题等价转换为0-1非线性整数规划问题,给出了单机排序问题的贪婪算法.     

极小化加权总完工时间的分批排序问题

本文讨论了分批排序中极小化加权总完工时间的两个问题.就所有工件的加工时间都相等这一特殊情况,分别给出两个算法,并证明了算法的最优性.     

极小化最大完工时间的单机分批加工问题

本文考虑极小化最大完工时间的单机分批加工问题．设有n个工件和一台批加工机器．每个工件有一个释放时间和一个加工时间．批加工机器可以同时加工b(b相似文献   

极小化最大提前完工费用的可中断排序问题

讨论了带截止期限的$n$个工件在单机上加工,工件间存在优先约束,在允许机器空闲的条件下,确定一个工件的可中断排序,极小化最大提前完工费用.首先考虑两种特殊情形:(1)截止期限相同,存在优先约束;(2)截止期限任意,不存在优先约束.针对两种情形分别给出了时间复杂度为$O(n^2)$的算法.在此基础上,考虑普遍情形,即截止期限任意,存在优先约束,也给出了一个时间复杂度为$O(n^2)$的算法.由于工件不允许延迟,问题可能会无可行排序,需先对问题的可行性进行讨论.     

极小化加权完工时间和的Flowshop问题的算法

本文讨论了极小化加权完工时间和的Flowshop问题.我们给出了一个最坏情况误差界为m的启发式算法,对于m=2的情况,如果工件具有一致权因子,即pi相似文献   

加工时间可控和简单线性增长的平行机排序

本文研究加工时间可控并随开工时间简单线性增长的平行机排序问题.证明了该问题为NP-难问题,该问题存在满足以下性质的最优排序:每个工件的加工时间要么完全压缩,要么完全不压缩;每台机器的工件排序由一个工件参数和控制变量的函数的递增序给出.通过将问题等价转换为0-1非线性整数规划问题,给出了平行机排序问题的贪婪算法.     

工件有到达时间及可拒绝下的同类平行机排序问题的近似算法

本文研究工件有到达时间且可拒绝下的同类平行机排序问题。在该问题中, 给定一个待加工工件集, 每个工件在到达之后, 可以被选择安排到$m$台同类平行机器中的某一台机器上进行加工, 也可以被选择拒绝加工, 但需支付一定的拒绝惩罚费用。目标函数是最小化接受工件集的最大完工时间与拒绝工件集的总拒绝费用之和。当$m$为固定常数时, 设计了一个伪多项式时间动态规划精确算法; 当$m$为任意输入时, 设计了一个近似算法, 当接受工件个数大于$(m-1)$时, 该算法近似比为3, 当接受工件个数小于$(m-1)$时, 该算法近似比为$(2+\rho)$, 其中$\rho$为机器加工速度最大值和最小值的比值。最后通过算例演示了算法的运行。     

List scheduling algorithms to minimize the makespan on identical parallel machines

In this paper we present constructive algorithms for the classical deterministic scheduling problem of minimizing the makespan on identical machines. Since the problem is known to beNP-hard in the strong sense, the approximate algorithms play a relevant role when solving this problem. The proposed algorithms are based on list scheduling procedures, but the assignment rule is not the same for the full set of jobs. Computational results show that these algorithms perform very well. This research has been partially supported by the Research Project H015/2000, Universidad de Alcalá. The authors are indebted to Joaquín Pérez and the referees for their helpful remarks and comments. We also wish to thank Paul Alexander Ayres for his help in the correct use of English.     

Approximation algorithms for scheduling unrelated parallel machines

We consider the following scheduling problem. There arem parallel machines andn independent jobs. Each job is to be assigned to one of the machines. The processing of jobj on machinei requires timep _ij . The objective is to find a schedule that minimizes the makespan.Our main result is a polynomial algorithm which constructs a schedule that is guaranteed to be no longer than twice the optimum. We also present a polynomial approximation scheme for the case that the number of machines is fixed. Both approximation results are corollaries of a theorem about the relationship of a class of integer programming problems and their linear programming relaxations. In particular, we give a polynomial method to round the fractional extreme points of the linear program to integral points that nearly satisfy the constraints.In contrast to our main result, we prove that no polynomial algorithm can achieve a worst-case ratio less than 3/2 unlessP = NP. We finally obtain a complexity classification for all special cases with a fixed number of processing times.A preliminary version of this paper appeared in theProceedings of the 28th Annual IEEE Symposium on the Foundations of Computer Science (Computer Society Press of the IEEE, Washington, D.C., 1987) pp. 217–224.     

An effective heuristic for minimising makespan on unrelated parallel machines

Scheduling independent tasks on unrelated machines is a relatively difficult and challenging problem. In this paper, we develop a tabu search based heuristic for minimising makespan for the above problem that can provide good quality solutions for practical size problems within a reasonable amount of computational time. Our adaptation of this tabu search uses hashing to control the tabu restrictions of the search process and requires fewer critical parameters than many of the common tabu search approaches employed for combinatorial optimisation. Hashing is simple to implement and very effective in providing a near-optimal solution. Computational results are presented to demonstrate the effectiveness of the proposed heuristic.     

Multiple-objective heuristics for scheduling unrelated parallel machines

This research proposes two heuristics and a Genetic Algorithm (GA) to find non-dominated solutions to multiple-objective unrelated parallel machine scheduling problems. Three criteria are of interest, namely: makespan, total weighted completion time, and total weighted tardiness. Each heuristic seeks to simultaneously minimize a pair of these criteria; the GA seeks to simultaneously minimize all three. The computational results show that the proposed heuristics are computationally efficient and provide solutions of reasonable quality. The proposed GA outperforms other algorithms in terms of the number of non-dominated solutions and the quality of its solutions.     

Optimal solutions for unrelated parallel machines scheduling problems using convex quadratic reformulations

In this work, we take advantage of the powerful quadratic programming theory to obtain optimal solutions of scheduling problems. We apply a methodology that starts, in contrast to more classical approaches, by formulating three unrelated parallel machine scheduling problems as 0–1 quadratic programs under linear constraints. By construction, these quadratic programs are non-convex. Therefore, before submitting them to a branch-and-bound procedure, we reformulate them in such a way that we can ensure convexity and a high-quality continuous lower bound. Experimental results show that this methodology is interesting by obtaining the best results in literature for two of the three studied scheduling problems.     

Optimal preemptive scheduling on a fixed number of identical parallel machines

In this paper, we consider the preemptive scheduling problem on a fixed number of identical parallel machines. We present a polynomial-time algorithm for finding a minimal length schedule for an order class which contains properly interval orders.     

An approximation algorithm for scheduling two parallel machines with capacity constraints

We consider the problem of scheduling n independent jobs on two identical parallel machines, with a limit on the number of jobs that can be assigned to each single machine, so as to minimize the total weighted completion time of the jobs. We study a semidefinite programming-based approximation algorithm for solving this problem and prove that the algorithm has a worst case ratio at most 1.1626.     

关于平行排序问题公平度的一个注记

利用经典的SPTgreedy算法分析了不同类机排序问题的全局公平度,证明了该算法所生成排序的公平度不超过m,并且该界为紧的.     

带学习效应的两台平行机时间表长问题

研究机器带学习效应, 目标函数为时间表长的两台平行机排序问题, 问题是NP-难的. 首先建立了求解该问题最优解的整数规划模型. 其次, 基于模拟退火算法给出了该问题的近似算法SA, 并证明了该算法依概率1 全局收敛到最优解. 最后, 通过数值模拟对所提出的算法进行了性能分析. 数值模拟结果表明, 近似算法SA可以达到最优值的99%, 准确度高, 算法较有效.