Morphology syntheses and properties of well-defined Prussian Blue nanocrystals by a facile solution approach

Large-scale syntheses of Prussian Blue (PB) uniform nanocubes and nanospheres, together with an interesting PB micro-frame structure, have been achieved by direct dissociation of a single-source precursor K(3)[Fe(CN)(6)] with polyvinylprrolidone (PVP) as a capping and reducing agent. The reaction temperature has been proved to be a key factor for morphology development of PB nanocrystals, and the size of PB nanocrystals can be tuned by adjusting the feed ratio of K(3)[Fe(CN)(6)] to PVP and the concentration of K(3)[Fe(CN)(6)]. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected-area electron diffraction (SAED), and high resolution transmission electron microscopy (HRTEM) were used to characterize the resulting nanocrystals and investigate their growth mechanisms. Optical and magnetic studies showed size- and shape-dependent optical and magnetic properties in the PB nanocrystals. An excellent electro-catalytic property to hydrogen peroxide reduction was observed at the PB nanocube-modified electrode.     

Photodeposition of Prussian Blue Films on TiO(2): Additive Effect of Methanol and Influence of the TiO(2) Crystal Form

The coupling of TiO(2) and transition metal complexes is attempted with the aim of higher functionalization of the TiO(2) photocatalyst. UV irradiation (lambda(ex)>300 nm) of a TiO(2) suspension containing equimolar aqueous solutions of FeCl(3) and K(3)[Fe(CN)(6)] forms uniform thin films of "water-insoluble Prussian blue" (PB, Fe(4)(3+) [Fe(II)(CN)(6)](3)) on the surface of TiO(2) particles. The PB photodeposition is enhanced significantly by the addition of a small amount of CH(3)OH in both the rutile and anatase TiO(2) systems. The activity of anatase TiO(2) is greater than that of rutile in the presence of CH(3)OH (2.46 M) by a factor of 1.6+/-0.2, whereas the activities are comparable in the absence of CH(3)OH. These results are discussed on the basis of a proposed reaction mechanism. Copyright 2001 Academic Press.     

Prussian blue nanoparticles protected by poly(vinylpyrrolidone)

Prussian blue (PB) nanoparticles protected by poly(vinylpyrrolidone) (PVP) were prepared by mixing aqueous Fe2+, Fe(CN)63-, and PVP solutions together and were characterized by UV-vis, IR, XRPD, and TEM. Averaged dimensions of the nanoparticles were controlled between 12 and 27 nm depending on initial Fe ion concentrations and feed ratios of Fe ion to PVP. Solubility of PB bulk in organic solvents is considerably low; nevertheless, formations of the PB nanoparticles dramatically increase the solubility in a variety of organic solvents. It is noteworthy that the PVP-protected PB nanoparticles stably maintain the cluster formations without further aggregations and dissociation in CHCl3 over 1 month. Measurement of the critical temperature (Tc) where PB nanoparticles exhibit a ferromagnetic property showed a gradual decrease of Tc for the nanoparticles as the particle sizes become smaller. This result could be ascribed to the reduction of the averaged numbers of magnetic interacted neighbors.     

PREPARATION AND CHARACTERIZATION OF DOXORUBICIN-LOADED MAGNETIC ANTICANCER NANOPARTICLES

Doxorubicin（ADM）-loaded magnetic anticancer nanoparticles, using Fe3O4 as core, doxorubicin as model drug and polyvinylpyrrolidone （PVP） as matrix, were prepared by inverse emulsion polymerization. The experimental results showed that the average diameter of Fe3O4 particles was 19.8nm. The X-ray diffraction itzdicated that the prepared Fe3O4 particle was pure cubic Fe3O4, The results obtained by SEM showed the magnetic nanoparticles under optimal operating condition had a smooth spherical surface, LLS showed an average size of 78. 7nm. And IR results demonstrated that they consisted of ADM, PVP and Fe3O4.     

Fabrication and electrochemical investigation of layer-by-layer deposited titanium phosphate/Prussian blue composite films

Composite films of titanium phosphate (TiPS)/Prussian blue (PB) were fabricated by the alternative deposition of TiPS layer and PB nanocrystals. The layer of TiPS was fabricated by adsorption of hydrated titanium from aqueous Ti(SO4)2 solution and subsequent reaction with phosphate groups. The layer of PB nanocrystals was fabricated by sequential adsorption of FeCl3 solution and K4[Fe(CN)6] solution. Regular deposition of TiPS/PB composite films were verified by UV-vis absorption spectroscopy and quartz crystal microbalance measurements. The successful fabrication of the TiPS/PB composite films was further confirmed by X-ray photoelectron spectroscopy and Fourier transform infrared (FT-IR) spectroscopy. Instead of producing films of TiPS layers alternating with PB nanocrystal layers, the TiPS/PB composite films have a structure in which the interstices of the PB nanocrystal films are filled with TiPS component. TiPS/PB composite films show enhanced electrochemical properties and improved stability in comparison with pure PB films prepared by the multiple sequential adsorption process. TiPS/PB composite films have the capability to catalyze the electrochemical reduction of H2O2 and can be used as a biosensor for detecting H2O2.     

Effects of vinyl series polymers on the formation of hematite particles in a forced hydrolysis reaction

The influence of polymers on the formation of hematite particles from forced hydrolysis of acidic FeCl(3) solution was investigated using vinyl series polymers with different functional groups. The disk-like hematite particles were produced from forced hydrolysis of acidic FeCl(3) solution in the presence of polyvinyl alcohol (PVA: 0-1 wt%). On the other hand, spherical particles were produced by addition of very small amounts of polyacrylamide (PAAm: 0-0.004 wt%). The size of spherical particles was slightly decreased with increase in the concentration of PAAm. The ellipsoidal particles were precipitated by addition of a very low concentration of polyacrylic acid (PAAc: 0-0.004 wt%). The effect of polymers on the hematite particle formation was expressed in the order of PVA相似文献   

Prussian Blue/Multiwalled Carbon Nanotube Hybrids: Synthesis,Assembly and Electrochemical Behavior

Prussian blue/carbon nanotube (PB/CNT) hybrids with excellent dispersibility in aqueous solutions were synthesized by adding CNTs to an acidic solution of Fe³⁺, [Fe(CN)₆]^3? and KCl. Fourier transform infrared spectroscopy, UV‐vis absorption spectroscopy and scanning electron microscopy were employed to confirm the formation of PB/CNT hybrids. The PB nanoparticles formed on the CNT surfaces exhibit a narrow size distribution and an average size of 40 nm. The present results demonstrate that the selective reduction of Fe³⁺ to Fe²⁺ by CNTs is the key step for PB/CNT hybrid formation. The subsequent fabrication of the PB/CNT hybrid films was achieved by layer‐by‐layer technique. The thus‐prepared PB/CNT hybrid films exhibit electrocatalytic activity towards H₂O₂ reduction.     

Synthesis, characterization and immobilization of Prussian blue nanoparticles. A potential tool for biosensing devices

Prussian blue (PB) particles with the size of ca. 5 nm were synthesized and immobilized in a multilayer structure, as a strategy for the potential development of an amperometric transducer for oxidase-enzyme-based biosensors. Multilayer films composed of PB and poly(allylamine hydrochloride) (PAH) were prepared via layer-by-layer (LbL) sequential deposition. The process was carefully monitored by UV-vis spectroscopy and cyclic voltammetry. The increase of the redox current peaks during the layer-by-layer deposition demonstrated that charge propagation within the film occurs. Linear increase of UV-vis absorbance with the number of deposited bilayers indicates that well-organized systems have been elaborated. ITO electrodes coated with PB/PAH films were used successfully for detecting H2O2, sensitivity being dependent on the number of PB/PAH layers.     

Size and surface effects of prussian blue nanoparticles protected by organic polymers

Prussian blue (PB) nanoparticles protected by organic polymers such as poly(vinylpyrrolidone) (PVP) and poly(diallyldimethylammonium chloride) (PDDA) were prepared. Different experimental conditions (concentrations of Fe ions and feed ratios of Fe to the polymers) have been investigated to control the size of the PB nanoparticles. For example, the averaged dimensions of the PB nanoparticles were tuned from 12 to 27 nm by use of PVP in the different conditions. Addition of PDDA produced the PB nanoparticles with very small dimensions (5-8 nm) by an effective electrostatic interaction. We found that the surface environments of the PB nanoparticles affect the inherent properties of PB. The shifts of charge transfer (CT) absorptions from Fe(2+) to Fe(3+) in the PB nanoparticles resulted from the surface-protecting polymers. Especially, the PB nanoparticles with the PVP protection show high solubility in a variety of organic solvents and a solvent-dependent CT absorption. Measurement of the magnetic properties of the PB nanoparticles showed unprecedented size-dependency, surface effect, and superparamagnetic properties.     

Redox properties of the ferricyanide ion on electrodes coated with layer-by-layer thin films composed of polysaccharide and poly(allylamine)

Polyelectrolyte multilayer thin films were prepared by an alternate deposition of poly(allylamine hydrochloride) (PAH) and anionic polysaccharides {carboxymethylcellulose (CMC) and alginic acid (AGA)} on the surface of a gold (Au) disk electrode, and the binding of ferricyanide [Fe(CN)(6)](3)(-) and hexaammine ruthenium ions [Ru(NH(3))(6)](3+) to the films was evaluated. Poly(acrylic acid) (PAA) was also employed as a reference polyanion bearing carboxylate side chains. A quartz-crystal microbalance study showed that PAH-CMC and PAH-AGA multilayer films grow exponentially as the number of depositions increases. The thicknesses of five bilayers of (PAH-CMC)(5) and (PAH-AGA)(5) films were estimated to be 150 +/- 20 and 90 +/- 15 nm, respectively, in the dry state. The PAH/polysaccharide multilayer film-coated Au electrodes exhibited a redox response to the [Fe(CN)(6)](3)(-) ion dissolved in solution, irrespective of the sign of the surface charge of the film, suggesting the high permeability of the films to the [Fe(CN)(6)](3)(-) ion. In contrast, the PAH-PAA film-coated Au electrodes exhibited a redox response only when the outermost surface of the film was covered with a positively charged PAH layer. However, the permeation of the [Ru(NH(3))(6)](3+) cation was severely suppressed for all of the multilayer films. It was possible to confine the [Fe(CN)(6)](3)(-) ion in the films by immersing the film-coated electrodes in a 1 mM [Fe(CN)(6)](3)(-) solution for 15 min. Thus, the [Fe(CN)(6)](3)(-)-confined electrodes exhibited a cyclic voltammetric response in the [Fe(CN)(6)](3)(-) ion-free buffer solution. The loading of the [Fe(CN)(6)](3)(-) ion in the films was higher when the surface charge of the film was positive and increased with increasing film thickness. It was also found that the [Fe(CN)(6)](3)(-) ion confined in the films serves as an electrocatalyst that oxidizes ascorbic acid in solution.     

Ion-Free latex films as dual-phase electrolytes: Styrene–butadiene rubber and nitrile–butadiene rubber synthesized by emulsion polymerization with poly-(vinyl pyrrolidone) stabilizer

Ion-free latices of styrene-butadiene rubber (SBR) and nitrile-butadiene rubber (NBR) were synthesized by emulsion polymerization with use of poly (vinyl pyrrolidone) (PVP) stabilizer. The goal was to prepare ion-free latex films, possessing dual-phase latex particle morphology, and swell the films with liquid electrolyte to yield dual-phase polymer electrolytes (DPE). SBR/PVP latex was prepared readily, but NBR/PVP latex was sensitive to coagulation. Differential scanning calorimetric (DSC) and scanning electron microscopic (SEM) analyses of latex films provided morphological evidence concerning particle structure and phase separation. Blends of NBR/PVP and PB/PVP latices (PB = polybutadiene) were also investigated, but particle structure was not present in the blended latex film, even though particle structure was present in the individual NBR/PVP and PB/PVP latex films. After extensive swelling of SBR/PVP latex films, PVP was extracted from the films, and ionic conductivities greater than 10^?3 S/cm were achieved. © 1994-John Wiley & Sons, Inc.     

硫酸钡粒径调控剂C-N-CDs的制备、应用及机理

通过柠檬酸与乙二胺水热反应制备羧基、氨基修饰碳点(C-N-CDs),其具有优异的硫酸钡粒径调控作用：可使沉淀法制备的BaSO₄颗粒平均粒径减小到45.3 nm,小于同等条件下传统配位剂乙二胺四乙酸(EDTA)调控制备的BaSO₄颗粒平均粒径(73.7nm)。将所制备的纳米BaSO₄样品添加进聚乙烯醇(PVA)薄膜中可增强薄膜的力学性能。研究发现C-N-CDs的化学性能、表面电性、空间位阻是影响BaSO₄粒径大小的重要因素。     

Porous Fe3O4 nanoparticles: synthesis and application in catalyzing epoxidation of styrene

A facile route was employed to synthesize porous magnetite via reaction of FeCl(3)·6H(2)O with N(2)H(4)·H(2)O in ethylene glycol without any structure-directing agent. The resultant Fe(3)O(4) particles were characterized by transmission electron microscopy, N(2) adsorption, X-ray photoelectron spectroscopy, and thermal gravimetric analysis. It was demonstrated that the particle size varied in the range of 40-220 nm, and the pore size of particles was centered around 2 nm. The gases produced in the formation process of the particles played key role in the formation of the porous structure. The obtained porous magnetite was used as support to immobilize Au nanoparticles with size less than 2 nm with the assistance of L-cysteine. The as-prepared Fe(3)O(4) particles can effectively catalyze epoxidation of styrene, and the immobilization of Au nanoparticles on the Fe(3)O(4) support significantly improved the activity of the catalyst.     

Ion-free latex films composed of fused polybutadiene and poly (vinyl pyrrolidone) particles as polymer electrolyte materials

Latex films composed of fused polybutadiene (PB) and poly (vinyl pyrrolidone) (PVP) particles that contain no ionic, hydroxyl, or amino groups were swelled with lithium salt solutions to yield new polymer electrolyte materials. The latex particle consists of a nonpolar, rubbery core that contains the PB component and a polar, glassy shell that contains the PVP component. The particle core-shell morphology was retained in the solid state, after the latex dispersion medium was removed and the films dried at high temperatures, due to the high T_g of the PVP shell. The films swelled when immersed in lithium salt solutions, and ionic conductivity of swollen films was greater than 10^-3 S/cm. Swelling and ionic conduction occurred only in the polar PVP component. Extraction of PVP occurred with extended swelling. © 1994 John Wiley & Sons, Inc.     

Electrocatalysis of peroxide reduction by Au-stabilized, Fe-containing poly(vinylpyridine) films

We show that poly(vinylpyridine) (PVP) coated glassy carbon surfaces containing Fe(CN)6(3-) exhibit catalytic activity toward electroreduction of H2O2. While Fe(CN)6(3-) is catalytically inactive in solution phase, it exhibits catalytic activity upon incorporation into the PVP film, because film incorporation leads to an open coordination site in the otherwise inert Fe(CN)6(3-) molecule. However, this catalytic activity is quickly lost during H2O2 electroreduction due to leaching of the Fe species from the PVP film. The Fe catalyst in the PVP film could be stabilized by 1 order of magnitude in time by electrodeposition of small Au particles. Characterization of the film using scanning electron microscopy, secondary ion mass spectroscopy, and Raman spectroscopy shows that covalent attachment between the Au particle and the Fe-based catalyst is a likely mechanism for catalyst stabilization.     

Preparation and characterization of ultrafine Fe-Cu-based catalysts for CO hydrogenation

The ultrafine particles of a new style Fe-Cu-based catalysts for CO hydrogenation were prepared by impregnating the organic sol of Fe（OH）3 and Cu（OH）2 onto the activated Al2O3, in which the organic sol of Fe（OH）3 and Cu（OH）2 were prepared in the microemulsion of dodecylbenzenesulfonic acid sodium（S）/n-butanol（A）/toluene（O）/water with V（A）/V（O） = 0.25 and W（A）/W（S） = 1.50. This catalyst was characterized by particle size analysis, XRD and TG. The results of particle size analysis showed that Fe（OH）3 particles with a mean size of 17.1 nm and Cu（OH）2 particles with an average size of 6.65 um were obtained. TG analysis and XRD patterns suggested that 673 K is the optimal calcination temperature. CO hydrogenation produced C＋OH with a high selectivity above 58 wt% by using the ultrafine particles as catalyst, and the total alcohol yield of 0.250 g·ml^-1 ·h^-1 was obtained when the contents of Al2O3 and K were 88.61 wt% and 1.60 wt%, respectively.     

Synthesis of ion-free latex particles composed of polybutadiene and poly (vinyl pyrrolidone) as polymer electrolyte materials

The synthesis of polybutadiene (PB) by emulsion polymerization with use of poly (vinyl pyrrolidone) (PVP) stabilizer was investigated. The goal was to prepare flexible latex films that clearly retain particle morphology in the solid state after heat treatment and contain no ionic, hydroxyl, or (primary, secondary) amino groups. The latex particle core composed of PB was nonpolar and rubbery, while the particle shell composed of PVP was polar and glassy. Average particle diameter was measured by the dynamic light scattering technique, and particles were imaged by scanning and transmission electron microscopic analyses. Dialysis of the latices resulted in successful exchange of the dispersion medium without precipitation. © 1994 John Wiley & Sons, Inc.     

Influence of hydrolyzed and nonhydrolyzed Ti,Cr, and Al ions on the formation of beta-FeOOH particles

Beta-FeOOH particles were synthesized in the presence of Ti(IV), Al(III), and Cr(III) at metal/Fe atomic ratios of 0-0.1 by the following two methods: hydrolysis of aqueous FeCl3 solutions added to the hydrolysis products of these metal ions (subsequent hydrolysis, SH) and hydrolysis of aqueous FeCl3 solutions dissolving these metal ions (combined hydrolysis, CH). On increasing Al/Fe the particle size of the products with AlCl3 by SH method steeply rose at a low Al/Fe and then fell. The similar increase of particle size was seen in SH method with Ti(SO4)2 though the addition of TiCl4 decreased the particle size. In CH method, Ti(IV) markedly impeded the beta-FeOOH formation but Al(III) and Cr(III) showed no influence. The particles prepared by CH and SH methods contained a large amount of Ti(IV) but a few Al(III) and Cr(III). The large spindle-shaped and rod-shaped particles produced by SH method with AlCl3 and Ti(SO4)2 were highly microporous and poorly crystallized, indicating that the particles consist of fine primary particles and the aggregation of fine particles would be promoted by SO4(2-). The different influences of the metal ions on the beta-FeOOH formation were explained by their hydrolysis characteristics.     

Polyvinylpyrrolidone adsorption and structural studies on homoionic Li-, Na-, K-, and Cs-montmorillonite colloidal suspensions

Structural aspects of dilute homoionic Li-, Na-, K-, and Cs-montmorillonite (M-montmorillonite) particle suspension (1 g/L) under low-electrolyte-concentration (0.1 mM MCl) conditions were characterized by static (absorbance or turbidity) and dynamic (photon correlation spectroscopy) light-scattering methods as well as by the adsorption behaviors of nonionic polyvinylpyrrolidone (PVP) mol wt 5,000 g/mol (LMW PVP) and mol wt 400,000 g/mol (HMW PVP). Taking Li-montmorillonite as a reference for a single plate particle, a particle size increase and a surface accessibility decrease to polymer adsorptions were measured along the Li, Na, K, and Cs series. The results are related to the existence of montmorillonite quasicrystals or tactoids in diluted suspension, whose stability increases along the same cation series. Molecular weight effects on the PVP surface accessibility are discussed in terms of permeation properties of the different M-montmorillonite particles. Modeling the results calculates an average number of plates in montmorillonite quasi-crystals and the surface area distribution of ultramicropores <0.7 nm and pores >0.7 nm in M-montmorillonite particles. It can also be demonstrated by applying hydrodynamic and electrokinetic methods that the measured high absorbance or turbidity increase of PVP-loaded montmorillonite particles is not due to aggregation phenomena but to a PVP contribution in the light-scattering intensity.     

Synthesis, characterization, and immobilization of Prussian blue-modified Au nanoparticles: application to electrocatalytic reduction of H2O2

Au nanoparticles modified with electroactive Prussian blue (PB) were for the first time synthesized by a simple chemical method. Transmission electronic microscopy showed that the average size of the Prussian blue shell/Au core hybrid composite (PB@Au) was about 50 nm, and Fourier transform IR, UV-vis spectra, and cyclic voltammetry confirmed the existence of PB on the surface of Au nanoparticles. Using the LbL technique, multilayer thin films of PB@Au nanoparticles were prepared by the alternate adsorption of oppositely charged linear polyelectrolyte poly(allylamine hydrochloride) (PAH) onto ITO glass for the construction of a hydrogen peroxide sensor. The novel multilayer films were characterized by SEM, cyclic voltammetry, and UV-visible absorption spectroscopy. The {PAH/PB@Au}n multilayer-modified electrode showed a well-defined pair of redox peaks and dramatic catalytic activity toward the reduction of hydrogen peroxide.