Determination of trace elements of some Egyptian crops by instrumental neutron activation,inductively coupled plasma-atomic emission spectrometric and flameless atomic absorption spectrophotometric analysis

Instrumental neutron activation analysis was used for the determination of Al, Br, Ca, Ce, Cl, Co, Cr, Cs, Eu, Fe, K, La, Mg, Mn, Na, Rb, Sb, Sc, Se, Ti, Th, V and Zn, ICP-AES for the determination Al, Ag, Ba, Be, Ca, Co, Cr, Cu, Fe, Ga, K, Li, Mg, Mn, Na, Ni, P, Sc, Sr, Ti, V and Zn and flameless AAS for the determination of Cd, Hg and Pb in egg plant, potatoes, green pepper (Leguminosae), vegetable marrow (Cucurbitaceae), pears, apple (Rosaceae), castor oil plant (Euphorbiaceae), lettuce (compositae), dill, parsley, coriander (Umbelliferae), and in some soil samples collected from Aswan province.     

Instrumental neutron activation analysis of brewer's yeast

Instrumental neutron activation was used for the determination of 23 trace and minor elements in 4 different samples of brewer's yeast. Detection limits for these elements vary from 2 ppb to 100 ppm. The following average concentrations were found (ppm, dry weight): Al 597, Br 0.36, Cl 1473, Co 0.21, Cu 19, Fe 285, K 16 400, Mg 1355, Mn 8.4, Na 2330, Rb 19, Sb 0.053, Se 1.2, V 2.2 and Zn 80. NBS standard 1569 was also analyzed and the following concentrations (in ppm) were measured: Al 2300, Br 0.65, Ce 0.23, Cl 460, Co 0.26, Cr 2.12, Cu 11, Fe 707, Gd 7.1, Hf 0.13, K 15 500, Mg 1780, Mn 7, Na 510, Rb 16, Sb 0.075, Sc 0.18, Se 0.92, Th 3.7, Ti 38, U 0.49, V 4.1 and Zn 70.     

Determination of impurities in nuclear fuel element components by neutron activation analysis

Neutron activation analysis methods for the determination of impurities in zirconium cladding material and uranium oxide are described. Detection limits for the elements Al, Cd, Cr, Co, Cu, Hf, Fe, Mn, Ni, W and U in zirconium are below that required by the ASTM B 352-79 standard. The method has been tested on the NIST SRM 360a Zircaloy-2 from which the elements Na, Mg, Al, Ca, V, Cr, Fe, Co, Ni, Cu, Eu and U have been detected. The values for Cr, Fe, Ni and Cu are compared with the certified values. A method for the pre-irradiation separation of the elements Mg, Na, Al, K, Sc, Ca, V, Mn, Cr, Fe, Co, Cu, Zn, Rb, Zr, Cd, Cs, REE and Hf from uranium has been developed. A neutron activation analysis method for the determination of those elements in uranium is described. The method is tested by the analysis of the IAEA reference sample SR-54/64. The elements Al, Mn, V, Cu, Cr, Co, Ni and Fe have been detected and the results compared with the certified values.     

Trace element content of some Polish hard and brown coals

Instrumental neutron activation analysis /INAA/ method was applied to measure major, minor and trace elements in 34 samples of hard and brown coal originating from eight Polish coal mines. The elemental concentrations of 38 elements /Na, Mg, Al, Cl, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Se, Br, Rb, Sr, Mo, Ag, Cd, In, Sb, I, Cs, Ba, La, Ce, Sm, Eu, Lu, W, Au and Th/ are presented and compared with published data for coals from various origin. Enrichment factors, calculated relative to iron and the average crustal rock composition, indicated that several elements are highly enriched in Polish coals.     

A trace element study of commercial infant milk and cereal formulas

Three commercial infant milk formulas, one commercial infant cereal formula and one locally grown cereal used for infant feeding in Nigeria were analyzed for 17 trace elements, viz: Al, As, Br, Ca, Ce, Cl, Co, Cr, Fe, K, Mg, Mn, Na, Rb, Sb, Se and Zn. The commercial milk formulas contain adequate amounts of Ca, Cl, Co, Fe, K, Mg, Mn, Na and Zn, the locally grown cereal contains adequate amounts of Co, K, Mg, Mn and Zn and low in Ca, Cl, Fe and Na while the commercial cereal has adequate amounts of Ca, Cl, Co, K, Mg, Na and Zn. None of the samples analyzed was found to contain any elements up to threshold toxicity limits of concentrations.     

Multielement analysis of green coffee and its possible use for the determination of origin

Using instrumental neutron activation analysis (INAA), graphite furnace atomic absorption spectrometry (GFAAS), flame atomic absorption spectrometry (FAAS) and combustion elemental analysis, green coffees of the Arabica species produced in crop year 1987/88 in Colombia, Costa Rica, Cuba, El Salvador, Mexico, Nicaragua, Panamá and Papua New Guinea were analysed for the elements Ba, Br, C, Ca, Co, Cr, Cu, Cs, Fe, H, K, La, Mg, Mn, N, Na, Rb, Sc, Sr and Zn. In accordance with the concentrations determined, the elements could be ranked into five groups: Sc (sub-ppb level); Br, Co, Cr, Cs and La (ppb level); Ba, Cu, Fe, Mn, Na, Rb, Sr and Zn (ppm level); Ca and Mg (%o level); and C, H, K and N (% level). On the basis of the results obtained, an attempt was made to establish the origin of the green coffee via its elemental composition. Among the investigated elements, manganese was found to be best suited as an indicator for this purpose. However, the elements C, Co, Cs, Na and Rb proved to be of interest too.     

Determination of minor, trace and toxic elements in chewing tobacco products by instrumental neutron activation analysis and identification of glutamic acid

Tobacco smoking/chewing has been a cause of concern because of it being related with oral cancer. It causes stimulation and ill physiological effects. Ten different brands of spit tobacco, eight gutkaas and five paan masalas have been analyzed for seven minor (Al, Na, K, Ca, Cl, Mg, and P) and 17 trace (As, Ba, Br, Co, Cr, Cs, Cu, Eu, Fe, Hg, La, Mn, Rb, Sb, Sc, Th, and Zn) elements by instrumental neutron activation analysis. Also Ni and Pb were determined by atomic absorption spectrophotometry. Concentration of Cd was below detection limit (<10?mg?kg^?1) in the tobacco samples. Mg, generally added as MgCO₃ to prevent caking, is present as minor constituent in spit tobacco and gutkaas but is below detection limit (<1?g?kg^?1) in paan masalas. Most elemental concentrations vary in a wide range depending on the nature of chewing tobacco. Spit tobacco has been found to be more enriched in essential elements (Ca, K, Na, P, Mn, and Rb), whereas gutkaas contain higher concentrations of Fe, Cr, Cu, and Zn. Paan masalas contain lower contents of other elements but higher content of Hg. Gutkaas also contain higher amounts of As and Pb. Further glutamic acid has been separated from tobacco leaves and characterized as it might bind with some elements.     

Analysis of marine biological certified reference material by various non-destructive neutron activation methods

By the use of non-destructive neutron activation analysis (NAA) twenty-four trace (Ag, As, Br, Cd, Ce, Cr, Co, Cu, Eu, Fe, Hf, I, La, Mn, Ni, Rb, Sb, Sc, Se, Sm, Sr, U, V and Zn) and six minor (Ca, Cl, Mg, K, Na and S) elements were determined in a certified marine tissue standard reference material. Four non-destructive methods including thermal, epi-thermal, prompt-gamma ray and delayed neutron counting activation analyses were performed. Results when compared to the certified values showed the reliability of employing these methods in such standards program.     

Analysis of lichen species for atmospheric pollution biomonitoring in the Santo André municipality,São Paulo,Brazil

Instrumental neutron activation analysis was applied for the determination of trace elements in Canoparmelia texana species collected mnonpolluted areas of Atlantic Forest and in six sites of Santo André Municipality, SP, Brazil. Concentrations of As, Ba, Br, Ca, Cd, Cl, Cr, Cs, Co, Fe, K, La, Mn, Na, Rb, Sb, Sc, Se, U, and Zn were determined and comparisons were made between the results obtained in lichens from different sites.     

Preparation of the Bovine Kidney and Bovine Muscle reference materials and the certification of element contents from interlaboratory comparisons

Results obtained in interlaboratory comparisons on candidate reference materials Bovine Kidney and Bovine Muscle, in which more than 32 laboratories participated employing atomic spectrometry, electrochemical, and nuclear analytical techniques, have been evaluated using combined statistical and analytical considerations. Certified and/or information values for the elements Br, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Mg, Mn, Mo, Na, P, Pb, Rb, Se, and Zn have been established. Information on contents of the elements Al, As, Au, Cs, Li, Ni, Sb, Sn, Sr, and V is also presented.     

57Fe Mössbauer spectroscopy of banded iron formations from eastern India

Samples of the mosses Hylocomium splendens and Pleurozium schreberi, collected in the summer of 1998, were used to study the atmospheric deposition of heavy metals and other toxic elements in the Chelyabinsk Region situated in the South Urals, one of the most heavily polluted industrial areas of the Russian Federation. Samples of natural soils were collected simultaneously with moss at the same 30 sites in order to investigate surface accumulation of heavy metals and to examine the correlation of elements in moss and soil samples in order to separate contributions from atmospheric deposition and from soil minerals. A total of 38 elements (Na, Mg, Al, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Zn, As, Se, Rb, Sr, Zr, Mo, Sb, Cs, Ba, La, Ce, Nd, Sm, Eu, Gd, Tb, Dy, Yb, Hf, Ta, W, Au, Th, U) in soil and 33 elements Na, Mg, Al, Cl, K, Ca, Sc, V, Cr, Mn, Fe, Co, Ni, Zn, As, Se, Br, Rb, Ag, Sb, Cs, Ba, La, Ce, Sm, Tb, Yb, Hf, Ta, W, Au, Th, U) were determined by epithermal neutron activation analysis. The elements Cu, Cd and Pb (in moss samples only) were obtained by atomic absorption spectrometry. VARIMAX rotated principal component analysis was used to identify and characterize different pollution sources and to point out the most polluted areas.     

The complementary use of radioanalytical methods and trace analysis methods for the characterisation of environmental IAEA reference materials

The IAEA laboratories have access to both nuclear analytical methods and conventional instrumental methods for trace analysis for the characterisation of its environmental and biological reference materials. A technical concept integrating the homogeneity data, the recommended test portion mass and the uncertainty on the trace element concentrations is explored using a combination of INAA, XRF, ICP-MS, ICP-AES, and AAS. The above approach is illustrated by selected examples of reference materials currently under evaluation for their trace element content. They include some or all of the following elements Al, As, Br, Ca, Cd, Co, Cr, Cs, Cu, Fe, Hg, K, Mg, Mn, Mo, Na, Ni, Pb, Rb, Se, Sr, Th, U, Zn in environmental biomonitor organisms (lichen, algae) and air dust filters.     

Mineral constituents of edible parasol mushroom Macrolepiota procera (Scop. ex Fr.) Sing and soils beneath its fruiting bodies collected from a rural forest area

Concentrations and interrelationships of twenty elements were studied in parasol mushroom and in the top layer of soil (0–10 cm) from the area of Kiwity (Poland). K, P, Mg, Ca, and Zn were found to be the most abundant elements in the mushroom. Higher concentrations of Fe, Mn, Na, Ni occurred in stipes then in caps, while Cd, Cr, Cu, Hg, Rb dominated in caps. Ag, Al, and Ba concentrations in caps and stipes were similar. Parasol mushroom is efficient in up-take and separation of Ag, Cd, Cu, Hg, K (in caps, the bioconcentration factor is BCF ≥ 100), Na, P, Rb (50 < BCF < 100), and Mg, Zn (BCF > 10) in its fruiting bodies, while Al, Ba, Ca, Co, Cr, Fe, Mn, Sr, and Pb are eliminated (BCF < 1). Parasol mushroom from rural forest area in the north-eastern region of Poland is of hygienic concern for human health because of toxic mercury and cadmium content in the edible caps, which are also rich in essential Cu, Fe, and their K, Mn, and Zn content is also high.     

Preparation of the bovine liver 12-02-01 reference material and the certification of element contents from an interlaboratory comparison

Summary The preparation of the bovine liver 12-02-01 reference material, its stabilization and homogeneity testing is presented. Evaluation of an interlaboratory comparison in which 31 laboratories took part using several analytical methods is described. From the results of the intercomparison, the contents of the elements Cd, Cu, Hg, Mn, Pb, Se, and Zn were certified, while for the elements Br, Co, Fe, K, Mo, Na, and Rb, information values were derived. Non-recommended values for the elements Ag, As, Ca, Cl, Cr, Cs, La, Mg, S, Sb, Sn, Sr, and V were also evaluated.Denoted as CZIM-liver in the report [23]     

Multi-element analysis of blood for trace metals by neutron activation analysis

Fourteen elements can be rapidly determined in whole blood by the neutron activation analysis procedure described. Three of these (Ag, Cl, Se) are measured after a 10-s irradiation and eleven others (Al, Ba, Br, Ca, Cu, I, Mg, Mn, Mo, Rb, V) are determined by a 180-s irradiation of a 1-cm³ sample of whole blood after destruction of organic matter and removal of sodium by hydrated antimony pentoxide. A further 13 elements (As, Au, Co, Cr, Cs, Fe, Hg, K, Na, Ni, Sb, Sc, Zn) are determined after overnight irradiation in the SLOWPOKE reactor.     

Preparation and homogeneity characterization of ten agricultural/food reference materials for elemental composition

Summary Ten agricultural/food reference materials (RM): bovine muscle powder, corn starch, hard red spring wheat flour, soft winter wheat flour, whole milk powder, wheat gluten, corn bran, Durum wheat flour, whole egg powder and microcystalline cellulose, were prepared by milling, irradiation, sieving, blending and packaging procedures. Homogeneity tests for 14 elements in randomly selected units were performed by the initiating laboratories by application of various analytical methods. Al, Ca, Cu, Fe, K, Mg, Mn, Na, Sr and Zn were determined by acid digestion flame atomic absorption spectrometry, and Cd, Co, Ni and Pb using acid digestion graphite furnace atomic absorption spectrometry after separation/preconcentration of the analytes by co-precipitation. In addition, the extensive set of analytical results obtained from the interlaboratory cooperative characterization campaign was assessed to provide homogeneity estimates for other elements. Measures of homogeneity were estimated from the within-laboratory precision from the more precise laboratories. All materials exhibited acceptable homogeneity for virtually all 29 elements (Al, As, B, Ba, Br, Ca, Cd, Cl, Co, Cr, Cu, Fe, Hg, I, K, Mg, Mn, Mo, N, Na, Ni, P, Pb, Rb, S, Se, Sr, V, Zn) for which best estimate concentration values were available, an essential pre-requisite in establishing reference values for these materials. Sixty-two percent of all homogeneity coefficients of variation (CV) were below 5%, with Br, Ca, Cl, Mg, Na, P, Zn and especially K and N exhibiting very high homogeneity CV less than 1% in some cases.Contribution no. 92–148 from Centre for Land and Biological Resources Research     

Summary of preparation and homogeneity characterization of ten agricultural food reference materials for elemental composition

Summary Preparation and development has been completed of ten agricultural/food reference materials (RMs): bovine muscle powder, corn starch, hard red spring wheat flour, soft winter wheat flour, whole milk powder, wheat gluten, corn bran, durum wheat flour, whole egg powder and microcrystalline cellulose. Homogeneity tests for 14 elements, Al, Ca, Cd, Co, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Sr and Zn were performed by the initiating laboratories by application of precise and reliable analytical methods based on flame atomic absorption spectrometry and graphite furnace atomic absorption spectrometry. An extensive set of analytical results obtained from the interlaboratory cooperative characterization campaign was assessed to provide homogeneity estimates for other elements. Estimates of homogeneity from within-laboratory precision indicated that all materials exhibited acceptable homogeneity for virtually all 29 elements (Al, As, B, Ba, Br, Ca, Cd, Cl, Co, Cr, Cu, Fe, Hg, I, K, Mg, Mn, Mo, N, Na, Ni, P, Pb, Rb, S, Se, Sr, V, Zn) for which best estimate concentration values are available. Two thirds of all homogeneity coefficients of variation were below 5%.     

Neutron activation analysis of an Egyptian cigarette and its ash

The concentration of 28 elements in tobacco and cigarette paper in an Egyptian Cigarette were determined using instrumental neutron activation analysis. These elements are: Al, As, Ba, Br, Ca, Ce, Cl, Co, Cr, Cs, Eu, Fe, Hf, K, La, Mg, Mn, Na, Ni, Rb, Sb, Sc, Se, Sr, Th, Ti, V and Zn. The cigarette filter (before and after normal smoking) and the produced ash were analyzed to determine the adsorption of the elements on the filter and their remains in ash. The material balance for the determined elements were calculated.     

Comparative PGAA and NAA results of geological samples and standards

Concentrations of major and trace elements in volcanic rock and soil samples, including geological standard reference materials, were determined by neutron activation analysis (NAA) and prompt gamma activation analysis (PGAA), both using the k ₀-standardization method. The paper highlights the different experimental procedures, such as sample preparation, data collection and spectrum evaluation. In geological samples, PGAA gives precise results for major elements (Si, Ti, Al, Fe, Mn, Mg, Ca, Na, K and—as a unique method—for H), for some of the light trace elements as B and Cl, as well as for Sc, S, Cr, Co, Ni, Cd, Nd, Sm and Gd. NAA is sensitive for the rare earth elements, and for many major (Ti, Al, Fe, Mn, Mg, Ca, Na, K) and trace elements (e.g.: Sc, V, Cr, Co, Ni, Cu, Zn, As, Se, Rb, Sr, Zr, As, Sb, Ce, Ba, Hf, Ta, W). For most major elements the results obtained by the two methods show good agreement. The comparison of the results obtained for trace elements is not always possible, since PGAA is less sensitive and concentrations are often below its detection limits. Nevertheless, the complementarity of NAA and PGAA allows nearly panoramic analysis of geological materials.     

Neutron activation analysis of biological materials by the monostandard method

Instrumental neutron activation analysis by the monostandard method has been applied to the analyses of biological NBS standard reference materials; 1571 Orchard Leaves and 1577 Bovine Liver. Aluminum foils containing 0.100% gold or 2.00% cobalt were used as the monostandards. The gamma-ray spectral data were recorded on punched paper tape and were analyzed by a computer assisted data processing. The following 25 elements were determined: Al, Ca, Cl Cu, Mg, Mn, V (by short period irradiation), As, Ba, Br, Co, Cr, Cs, Eu, Fe, Hg, K, La, Na, Rb, Sb, Sc, Se, Sm and Zn (by long period irradiation). The results were compared with the certified values by NBS and the reported values in literatures to prove the reliability and accuracy of the monostandard method.