有序介孔碳负载Fe、Co、Ni纳米晶的软模板合成及其表征

报道了在有序介孔碳基体中一步合成负载Fe、Co、Ni纳米晶的方法. 以间二苯酚和甲醛为碳源, F127为模板剂, Fe、Co、Ni的硝酸盐为前驱体, 通过软模板组装路线在酸性条件下合成了负载型有序介孔碳复合材料. 采用X射线衍射(XRD)、透射电镜(TEM)和氮气吸附等手段对所合成材料进行了表征. 结果表明: 合成的材料具有类似于SBA-15的有序介孔结构, 有序介孔碳负载Fe、Co、Ni纳米晶复合材料的比表面积分别为586、626和698 m²·g^-1. XRD和TEM表征结果证实了金属物种以高分散纳米晶的形式分布在介孔碳基体中.     

HCl对有序介孔氧化硅结构与形貌的影响

以三嵌段共聚物P123为有机模板导向剂、正硅酸乙酯TEOS为无机硅源, 在HCl存在的强酸性环境下, 采用水热法合成了有序介孔分子筛SBA-15. 采用XRD、SEM、TEM、N2吸附-脱附等手段对产物的结构与形貌进行了分析, 考察了HCl用量对有序介孔材料结构及形貌的影响. 结果表明, 在合成有序介孔氧化硅时, HCl发挥了催化和中间离子的双重作用, 促使棒状胶束形成六方有序排列, 降低SBA-15中微孔的数量, 而且对合成有序介孔氧化硅SBA-15的形貌有显著影响. 适宜的HCl用量对形成“珍珠链状”形貌的、热稳定性优良的SBA-15介孔材料具有重要作用.     

SBA-15负载Pd催化剂的制备及其在Heck反应中的应用研究

利用水热反应制备了表面离子液体功能化的SBA-15介孔材料,在丙酮溶液中与氯化钯反应,然后使用水合肼在乙醇中还原.测试了这种催化剂在Mizoroki-Heck反应中的催化活性.与直接负载在SBA-15上的钯催化剂相比,这种表面修饰的介孔SBA-15负载催化剂表现出更高的催化活性、可回收性和反应稳定性.氮气吸脱附实验和小角XRD衍射实验表明,在合成中,材料的介孔性能并没有被破坏.透视电镜也表征了该材料的表面形貌.最后,Mizoroki-Heck反应表明该催化剂具有很高的催化活性,且循环五次后,其催化活性降低并不明显.     

低介电损耗苯并噁唑复合材料的合成与表征

对介孔二氧化硅SBA-15进行氨基官能团化,制得NH2-SBA-15,通过溶液缩聚合成了一系列具有不同SBA-15质量分数的聚亚苯基苯并二噁唑/SBA-15(PBO/SBA-15)复合材料。利用红外光谱(FT-IR)、扫描电子显微镜(SEM)、热重分析(TG)和矢量网络分析仪(VNA)分别对复合材料的结构、微观形貌、热性能和电磁性能进行了表征与分析,研究了SBA-15对PBO/SBA-15复合材料介电参数的影响。研究表明:经过氨基官能团化之后,SBA-15能够均匀地分散在PBO基体中;当复合材料中SBA-15的质量分数小于8%时,PBO/SBA-15复合材料仍然保持着PBO优异的热稳定性;介孔二氧化硅SBA-15能够有效地降低PBO/SBA-15复合材料的复介电常数和介电损耗角正切,减弱PBO/SBA-15复合材料对电磁波的介电存储和损耗能力,使PBO/SBA-15复合材料表现出低介电损耗的性能。     

氨基功能化SBA-15的直接合成及其对CO_2的吸附性能研究

通过直接法合成了氨基功能化SBA-15介孔材料。使用X-射线粉末衍射法(XRD),N2吸-脱附,透射电子显微(TEM)等技术对氨基功能化材料进行了表征。实验结果表明:当反应原料中nAPTES/(nAPTES+nTEOS)≤0.20时,APTES功能化的材料都具有典型的介孔SBA-15结构;但当nAPTES/(nAPTES+nTEOS)≥0.225时,由于氨基对SBA-15结构的副作用导致SBA-15介孔结构坍塌。在氟离子辅助合成下可以获得高含量氨基(反应原料中nAPTES/(nAPTES+nTEOS)的比值为0.25)功能化的SBA-15材料,且此材料中的介孔孔径和BET比表面积都较大。CO2吸附结果表明,随着反应原料中APTES含量提高,所合成的材料对CO2的吸附量相应增加,同时在101kPa和25℃下,通过氟离子辅助合成的材料对CO2的吸附量远远优于无氟离子辅助合成材料的。本研究还对后嫁接法和直接合成法获得氨基功能化SBA-15介孔材料的优缺点进行了讨论。     

金属有机框架@介孔分子筛复合材料的构建和性质

通过蒸汽诱导内部水解法(VIH)在介孔分子筛SBA-15孔壁上引入Al_2O_3,合成得到Al_2O_3@SBA-15复合物,随后与对二苯甲酸配体反应,从而制备得到金属有机框架化合物(MIL-53)与介孔分子筛(SBA-15)复合材料(MIL-53@SBA-15)。采用粉末X射线衍射(PXRD)、N_2吸附-脱附测试、扫描电子显微镜(SEM)和透射电子显微镜(TEM)等技术证明成功合成了MIL-53@SBA-15复合材料。染料吸附实验结果表明,MIL-53@SBA-15复合材料相比于SBA-15、MIL-53及其物理混合样品,表现出对丁基罗丹明染料更高效吸附特性。     

富含羧基的球形介孔分子筛SBA-15的合成及药物释放性能

本文采用原位合成法合成了富含羧基的SBA-15球形介孔分子筛. 研究了修饰剂（三烷氧基氰乙基硅烷 CTES）的用量对介孔分子筛SBA-15形貌、孔径及BET比表面积的影响. 用粉末X射线衍射(XRD)、扫描电镜(SEM)、红外（IR）和氮气吸附/脱附对样品进行了详细的表征. 该材料展示了尺寸在0.5-1 μm规则的球形形貌、有序的二维六方相介孔结构、较大的比表面积和孔容、并且随着修饰剂用量的增加, SBA-15的孔径变小, 比表面积下降. 药物组装及缓释性能测试表明, 该材料具有较好的药物组装及缓释释放性能. 该材料在催化、药物载体和色谱分析填料等领域将具有潜在的应用.     

Cu-Zn-Zr/SBA-15介孔催化剂的制备及CO2加氢合成甲醇的催化性能

以具有骨架结构的SBA-15介孔分子筛为载体,采用浸渍法合成了具有高比表面积、不同金属氧化物含量的Cu-Zn-Zr介孔催化剂CZZx/SBA-15(x=0.3,0.4,0.5,0.6).采用N2吸附-脱附(BET)、X射线衍射(XRD)、H2程序升温还原(H2-TPR)、CO2吸附(CO2-TPD)和透射电子显微镜(TEM)等手段对样品进行了表征.在固定床反应器上评价了其CO2加氢合成甲醇的催化性能.实验结果表明,CZZx/SBA-15催化剂具有介孔结构,负载的Cu O,Zn O和Zr O2能够很好地分散在表面,并且负载氧化物晶粒尺寸不同.催化剂的铜比表面积SCu与甲醇催化活性呈近似线性关系,其中CZZ0.4/SBA-15催化剂表现出最大甲醇选择性(54.32%),与CZZ相比,甲醇选择性增加24.85%.随着金属氧化物负载量的增大,催化剂比表面积和SCu明显减小,甲醇选择性与收率也相应减小,负载型CZZx/SBA-15催化剂表面结构对CO2加氢合成甲醇反应活性起关键作用.     

有序介孔二氧化硅对正丁醛的吸附性能

合成了一系列具有不同孔结构与性质的有序介孔二氧化硅材料SBA-15、MCM-41、SBA-16、KIT-6, 同时通过改变水热温度制备了不同孔径大小的SBA-15, 并利用小角X射线散射、透射电镜、扫描电镜和氮气吸附-脱附等手段, 对其介孔结构进行了表征. 以正丁醛为探针分子, 考察了其对有机醛的吸附, 并与Y-沸石的吸附性能做了对比. 结果表明, 材料的介孔比表面积与其对正丁醛的吸附量成正比, 吸附等温线符合Langmuir 模型, 属于单层吸附, 具有最大介孔比表面积的MCM-41对正丁醛的吸附量最大(484 mg·g^-1). 最后将SBA-15添加到卷烟滤嘴中, 实验结果表明, SBA-15能显著降低卷烟烟气中巴豆醛的释放量.     

磺酸基团功能化的碳-硅介孔复合材料的制备及其在生物柴油绿色合成中的应用(英文)

利用化学浸渍法将蔗糖负载到 SBA-15 介孔材料孔道内部, 高温炭化形成的多聚苯环经发烟硫酸气相磺化处理后, 得到磺酸基团功能化的新型碳-硅介孔复合材料. 发烟硫酸气相磺化处理是该材料合成的关键步骤. X 射线衍射、扫描电镜和氮气吸附结果表明, 碳-硅介孔复合材料经磺酸化处理保持了高度有序的介孔结构. 热重、傅里叶变换的红外光谱及吡啶吸附红外光谱结果证明, 磺酸功能基团成功的嫁接于碳-硅介孔复合材料孔道的内表面, 反应活性中心为 Br?nsted 酸, 酸密度在 0.09~0.70 mmol/g 可以有效调变. 当碳负载量为 35% 时, 该复合材料在生物柴油的绿色合成中显示出最优的催化性能, 且可重复使用 3 次以上.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.