Highly sensitive electrocatalytic determination of pyrazinamide using a modified poly(glycine) glassy carbon electrode by square-wave voltammetry

A new voltammetric sensor based on electropolymerization of glycine at glassy carbon electrode (GCE) was developed and applied to determine of pyrazinamide (PZA) by square-wave voltammetry (SWV). The initial cyclic voltammetric studies showed an electrocatalytic activity of poly(Gly)/GCE on redox system of pyrazinamide in 0.1 mol L^?1 phosphate buffer solution pH 7.5, with E _Pc and E _Pa in ?0.85 and ?0.8 V (versus E _Ag/AgCl), respectively. Studies at different scan rates suggest that the redox system of pyrazinamide at poly(Gly)/GCE is a process controlled by diffusion in the interval from 10 to 100 mV s^?1. Square-wave voltammetry-optimized conditions showed a linear response of PZA concentrations in the range from 0.47 to 6.15 μmol L^?1 (R?=?0.998) with a limit of detection (LOD) of 0.035 μmol L^?1 and a limit of quantification (LOQ) of 0.12 μmol L^?1. The developed SWV-poly(Gly)/GCE method provided a good intra-day (RSD?=?3.75 %) and inter-day repeatability (RSD?=?4.96 %) at 4.06 μmol L^?1 PZA (n?=?10). No interference of matrix of real samples was observed in the voltammetric response of PZA, and the method was considered to be highly selective for the compound. In the accuracy test, the recovery was found in the range of 98.2 and 104.0 % for human urine samples and pharmaceutical formulation (tablets). The PZA quantification results in pharmaceutical tablets obtained by the proposed SWV-poly(Gly)/GCE method were comparable to those found by official analytical protocols.     

Fast Screening for Tobacco-Specific N-nitrosamines by CZE Using Dynamically Coated Capillaries

In this paper, we propose a rapid capillary zone electrophoretic method with dynamically coated capillaries for separation of and screening for six tobacco-specific nitrosamines, a group of strong carcinogens found only in tobacco products. Dynamic coating of the capillary surface with a polycation coating (CElixir Reagent A) followed by a polyanion coating (CElixir Reagent B; pH 2.5) was accomplished by use of a commercially available reagent kit. With this method, six tobacco-specific nitrosamines: N??-nitrosonornicotine, N??-nitrosoanatabine, N??-nitrosoanabasine, 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone, 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol, and 4-(methylnitroamino)-4-(3-pyridyl)-1-butanol were simultaneously separated and determined within 3 min, with a satisfactory detection limit of 1.0 ??g mL^?1 for all the tobacco-specific nitrosamines at S/N = 3, and a linear relationship between UV absorbance and analyte concentration (R ² > 0.98). The repeatability of the method ranged from 0.24 to 0.73% (RSD, n = 5) for migration time and 0.25?C1.54% (RSD, n = 5) for peak area, demonstrating that this capillary electrophoretic method is better than conventional capillary zone electrophoresis.     

A Validated Chiral LC Method for the Enantiomeric Separation of Cinacalcet Hydrochloride

A rapid isocratic chiral LC method has been developed for the separation of (S)-cinacalcet from (R)-cinacalcet. Good resolution with R _S  > 3 was obtained using a Chiralpak-IA column (250 × 4.6 mm, particle size 5 μm) and n-hexane, ethanol and trifluoroacetic acid as the mobile phase (95:5:0.1, v/v) at ambient temperature. Flow rate was kept at 1.0 mL min^–1 and elution was monitored by UV detection at 223 nm. This method was further used to determine the presence of (S)-cinacalcet in enantiopure pharmaceutical formulations containing (R)-cinacalcet. This method allowed for the detection and quantitation of (S)-cinacalcet of levels at 0.04 and 0.16 μg mL^–1, respectively. The method was validated following ICH guidelines.     

Sensitive detection of sulfanilamide by redox process electroanalysis of oxidation products formed in situ on glassy carbon electrode

This paper reported a simple method for sulfanilamide determination by redox process electroanalysis of oxidation products (SFDox) formed in situ on glassy carbon electrode. The CV experiments showed a reversible process after applied E _acc = + 1.06 V and t _acc = 1 s, in 0.1 mol L^?1 BRBS (pH = 2.0) at 50 mV s^?1. Different voltammetric scan rates (from 10 to 450 mV s^?1) suggested that the redox peaks of SFDox on the glassy carbon electrode (GCE) is an adsorption-controlled process. Square-wave voltammetry (SWV) method optimized conditions showed a linear response to SFD from 3.00 to 250.0 μmol L^?1 (R = 0.998) with a limit of detection of 0.638 μmol L^?1 and limit of quantification of 2.0 μmol L^?1. The developed the SWV method was successfully used in the determination of SFD pharmaceutical formulation and human serum. The SFD quantification results in pharmaceutical obtained by SWV-GCE were comparable to those found by official analytical protocols.     

Preconcentration and spectrophotometric determination of trace amount of formaldehyde using hollow fiber liquid-phase microextraction based on derivatization by Hantzsch reaction

Formaldehyde is known as a highly toxic compound to humans and identified as a carcinogenic substance. In this study, Hantzsch reaction was utilized for the derivatization of trace amounts of formaldehyde in aqueous samples with acetylacetone in the presence of ammonia to form an extractable colored product named 3,5-diacetyl 1,4-dihydrolutidine (DDL) and its further extraction using two-phase hollow fiber liquid-phase microextraction. The main experimental variables affecting the extraction performance were investigated and optimized. Under the optimum conditions (sample volume 12 mL; reaction temperature 70 °C; ammonium acetate buffer solution 4 mL 0.1 mol L^?1; acetylacetone 5 mL 0.15 mol L^?1; solvent octanol, salt concentration 20% (w/v) NaCl; pH of donor phase 7.0; stirring speed 400 rpm and extraction time 30 min), the linear dynamic range, limit of detection (LOD as 3S _b/m) and relative standard deviation (RSD %) of the proposed method were obtained as 5–250 μg L^?1 (r ² = 0.9979), 3.6 μg L^?1 and 2.5%, respectively. Finally, the applicability of the proposed method was examined, and very good results were obtained. The results confirmed the applicability of the proposed method as a versatile, low-cost and sensitive preconcentration method for determination of low concentrations of formaldehyde in aqueous solutions.     

Determination of Lipoic Acid in Biological Samples with Acetonitrile–Salt Stacking Method in CE

An acetonitrile–salt stacking method was established for the assay of lipoic acid (LA) in biological samples. Samples were deproteinized with acetonitrile at a final concentration of 60 % (v/v) and then injected hydrodynamically at 3.45 × 10³ Pa for 180.0 s. The optimum background electrolyte was found to be 90.0 mmol L^?1 pH 9.1 borate buffer. LA could be detected within 35 min at +7.0 kV with satisfactory repeatability (relative standard deviations, RSDs, of migration times and peak areas were both below 10 % for intraday and interday; n = 6/9) and a relatively low limit of detection of ca. 0.5 μmol L^?1.     

Solid-state structure determination and solution-state NMR characterization of the (2R,4R)/(2S,4S)- and (2R,4S)/(2S,4R)-diastereomers of the agricultural fungicide propiconazole,the (2R,4S)/(2S,4R)-symmetrical triazole constitutional isomer,and a ditriazole analogue

Single-crystal X-ray diffraction analysis was used to determine the structure of a racemic diastereomer of the agricultural fungicide propiconazole [1-(2-(2,4-dichlorophenyl)-4-n-propyl-1,3-dioxolane-2-yl-methyl)-1-H-1,2,4-triazole] and of two by-products (a symmetrical 1,3,4-triazole racemic-constitutional isomer and a propiconazole ditriazole analogue). All three crystalline racemic-diastereomers had (2R,4S)/(2S,4R)-stereochemistry in which then-propyl group was observed in atrans-to-phenyl disposition. Propiconazole (2R,4S)/(2S,4R)-diastereomer gives crystals belonging to the monoclinic space group P2₁,/a, and, at 293 K,a=8.1192(3),b=18.9769(6),c=10.7137(4) å,Β=99.765(3)?,V=1626.8(1) å³, Z=4,R(F)=0.060, andR _w(F)=0.058. The constitutional isomer by-product (2R,4S)/(2S,4R)-1-(2-(2,4-dichlorophenyl)-4-n-pro-pyl-1,3-dioxolane-2-yl-methyl)-1-H-1,3,4-triazole gives crystals belonging to the monoclinic space group P2₁/n, and, at 293 K,a=11.1763(6),b=10.7716(4),c=14.5804(8) å,Β=107.445(4)?,V=1674.6(1) å³, Z=4,R(F)=0.043, andR _w(F)=0.043. The ditriazole byproduct (2R,4S)/(2S,4R)-1-(2-(2-chloro-4-(1,2,4-triazole-1-yl)phenyl)-4-n-propyl-1,3-dioxolane-2-yl-methyl)-1-H-1,2,4-triazole gives crystals belonging to the triclinic space groupP¯ 1, and, at 193 K,a=5.3329(8),b=8.3738(7),c=20.240(2) å, α=84.213(6)?,Β=87.20(1)?,γ=86.23(1)?,V=896.5(2) å³, Z=2,R(F)=0.046, andR _w(F)=0.051. The presence of both propiconazole (2R.4S)- and (2S,4R)-enantiomers enables the formation of a crystalline racemic modification, while the diastereomeric propiconazole (2R,4R)- and (2S,4S)-enantiomers are viscous oils. In the absence of its enantiomorphic partner, the propiconazole (2R,4S)- or (2S,4R)-enantiomers remain as viscous oils rather than form chiral crystals.     

Acid–Base Properties, Solubility, Activity Coefficients and Na+ Ion Pair Formation of Complexons in NaCl(aq) at Different Ionic Strengths

The protonation constants and solubilities of three complexons [ethylenediamine-N,N′-disuccinic acid (EDDS), ethylene glycol bis(2-aminoethyl ether)-N,N,N′,N′-tetraacetic acid (EGTA) and 1,2-cyclohexanediamine-N,N,N′,N′-tetraacetic acid (CDTA)] are reported in aqueous solutions of NaCl with different ionic strength values (0 ≤ I ≤ 4.8 mol·L^?1) and, in the case of CDTA, in (CH₃)₄NCl (0.1 ≤ I ≤ 2.7 mol·L^?1). The dependence on ionic strength of the protonation constants of these three complexons and four other complexons that were previously reported (NTA, EDTA, DTPA and TTHA), is analyzed in NaCl solution; the ionic strength influences quite strongly the protonation constants (as an example for CDTA, log₁₀ K ₁ = 10.54 and 9.25 at I = 0.1 and 1 mol·L^?1, respectively), while the effect of (CH₃)₄NCl concentration is lower. Based on the total solubility S ^T and the protonation constant data at different salt concentrations, the solubility of the neutral species S ⁰ and the solubility products K _S0 are obtained. The Setschenow coefficients k _m and the solubility values S ₀ ⁰ in pure water are also reported (S ₀ ⁰  = 0.55, 0.21 and 0.75 mmol·kg^?1 for EDDS, EGTA and CDTA, respectively). The dependence of the protonation constants on ionic strength is also interpreted in terms of ion pair formation, and the formation constants of Na⁺ species are reported.     

Voltammetric determination of herbicide molinate in river water and rice samples using solid silver amalgam electrode fabricated with nanoparticles

The evaluation of the voltammetric behaviour and the determination of herbicide molinate were performed for the first time over the surface of solid amalgam electrode fabricated with silver nanoparticles using cyclic voltammetry and square-wave voltammetry techniques. The experimental and instrumental parameters were evaluated to reach the maximum analytical response for molinate. It was achieved when a medium composed of 0.04 mol L^?1 Britton–Robinson buffer at the pH value of 4.0 was used. Under these conditions, molinate showed one pronounced reduction peak at E_p = ?0.37 V (vs. Ag/AgCl 3 mol L^?1) that was characterised as an irreversible system. An analytical curve was constructed at the concentration range from 9.36 to 243.49 µg L^?1 and a limit of detection of 2.34 µg L^?1 was obtained. The amalgam electrode presented good stability during the measurements with relative standard deviation (RSD) values of 2.9% for the repeatability and 5.4% for the reproducibility. The voltammetric method developed here could be conveniently applied for the determination of molinate in river water and rice spiked samples at levels below those established on the legislations of European Union and Brazil with good accuracy (RSD of less than 5% for all samples). Comparison with HPLC technique was carried out and the results indicated satisfactory concordance. According to the results depicted here, the silver nanoparticles solid amalgam electrode showed itself highly sensitive and an interesting alternative for the routine analysis of molinate in water and food samples. Furthermore, it introduces an environmentally acceptable alternative to the mercury electrodes, most commonly used for determination of reducible pesticides.     

Self-assembled sensor based on boron-doped diamond and its application in voltammetric analysis of picloram

A self-assembled sensor based on a boron-doped diamond was investigated as a sensitive tool for voltammetric analysis of a member of a pyridine herbicide family - picloram. A cyclic voltammetry and a differential pulse voltammetry were applied for investigation of the voltammetric behaviour and quantification of this herbicide. Picloram yielded one well-developed irreversible oxidation signal at a very positive potential about +1.5 V vs. Ag/AgCl/3 mol L^?1 KCl electrode in an acidic medium and 1 mol L^?1 H₂SO₄ was chosen as a suitable supporting electrolyte. Operating parameters of differential pulse voltammetry were optimized and the proposed voltammetric method provided a high repeatability (a relative standard deviation of 20 repeated measurements at a concentration level of picloram of 50 µmol L^?1 equaled to 2.58%), a linear concentration range from 2.5 to 90.9 µmol L^?1 and a low limit of detection (LD = 1.64 µmol L^?1). Practical usefulness of the ‘environmentally-green’ electrochemical sensor was verified by an analysis of spiked water samples with satisfactory recoveries.     

Fluorescence signaling of aromatic oxoanion inclusion within metal-ion activated molecular receptor complexes formed from 2-(9-anthracenylmethylamino)ethyl-appended cyclen

Our observations that 1-[2-[(9-anthracenylmethylamino)ethyl)-4,7,10-tris[(2S)-2-hydroxy-3-phenoxypropyl]-1,4,7,10-tetraazacyclododecane, L¹, complexes Cd(II) to form fluorescent [CdL¹]²⁺ which undergoes a fluorescence change when it acts as an aromatic anion receptor complex has caused us to explore further the potential development of an interesting sequestration/sensor system. Accordingly, three new, octadentate, fluorescent, macrocyclic ligands, 1-[2-[(9-anthracenylmethyl)((2S)-2-hydroxy-3-phenoxypropyl)amino]ethyl]-4,7,10-tris[(2S)-2-hydroxy-3-phenoxypropyl]-1,4,7,10-tetraazacyclododecane, (L²), 1-[2-[(9-anthracenyl-methyl)((2S)-2-hydroxy-3-(4??-methyl)phenoxypropyl)amino]ethyl]-4,7,10-tris[(2S)-2-hydroxy-3-(4??-methyl)phenoxypropyl]-1,4,7,10-tetraazacyclododecane, (L³), and 1-[2-[(9-anthracenylmethyl)((2S)-2-hydroxy-3-(4??-t-butyl)phenoxypropyl)amino]ethyl]-4,7,10-tris[(2S)-2-hydroxy-3-(4??-t-butyl)phenoxypropyl]-1,4,7,10-tetraazacyclododecane, (L⁴), have been prepared with a view to using their metal complexes to study aromatic anion sequestration. The eight-coordinate Cd(II) complexes of L² and L³, [CdL²](ClO₄)₂·5H₂O and [CdL³](ClO₄)₂·2H₂O·2Et₂O are both capable of acting as receptors for a range of aromatic oxoanions. This is demonstrated by perturbation of the anthracene derived fluorescence emission intensity as the guest aromatic oxoanion and the receptor complex combine. In 20% aqueous 1,4-dioxane the receptor complex/aromatic oxoanion association constants are in the range of 10^3.2 M^?1 (guest = p-hydroxybenzoate) to 10^7.3 M^?1 (guest = 3,4,5-trihydroxybenzoate).     

Ionic Liquid-Based Headspace Liquid-Phase Micro-Extraction for the Determination of Dichlorobenzene Isomers in Soils

Headspace liquid-phase microextraction using ionic liquids as extracting solvents, followed by gas chromatographic detection was developed to determine o-dichlorobenzene, m-dichlorobenzene and p-dichlorobenzene in soil samples. The main parameters influencing the extraction of dichlorobenzene isomers were studied using the orthogonal experimental design forming L₉ (3⁴) was chosen. The results showed that the most important factors were enrichment time and pH of solution. Under the optimal conditions, limits of detections (LODs) for dichlorobenzene isomers were in the range of 0.001–0.002 μg g^?1. The repeatability of the proposed method, expressed as RSD (n = 5), varied between 4.4 and 14.6%.     

Molecularly imprinted stir bar sorptive extraction coupled with high-performance liquid chromatography for trace analysis of naphthalene sulfonates in seawater

In this paper, a novel molecularly imprinted polymer coated stir bar has been used to selectively extract naphthalene sulfonates (NS_s) directly from seawater sample. 1-Naphthalene sulfonic acid (1-NS) was used as template molecule. The effects of different parameters were optimized on the extraction efficiency and the optimum conditions were established as: the absorption and desorption times were fixed, respectively, at 10 and 15 min, stirring speed was 700 rpm, pH was adjusted to 4.1, amount of NaCl was 1 mol L^?1 and extraction process was performed at a temperature of 50 °C. The linear ranges were 2–250 µg L^?1 for 3,6-NDS-1-OH (1-naphthol-3,6-disulfonic acid), 4–250 µg L^?1 for 2-NS (2-naphthalene sulfonate) and 3–250 µg L^?1 for 1-NS. The detection limits were within the range of 0.32–0.95 µg L^?1. Under optimum conditions, the detection limits of the NSs were 0.84, 0.95 and 0.32 µg L^?1 with the enrichment factor of 117-, 41- and 77-fold for 2-NS, 1-NS, and 6-NDS-1-OH, respectively. The repeatability of the method was satisfactory (0.53 ≤ RSD ≤6.0 %, n = 10). The method has been successfully applied for the analysis of trace amounts of three naphthalene sulfonates in seawater of Chabahar Bay.     

Synthesis of flower-like cuo hierarchical nanostructures as an electrochemical platform for glucose sensing

Flower-like CuO hierarchical nanostructures were synthesized on copper foil substrate through a simple wet chemical route in alkaline media at room temperature. SEM images collected at different reaction times revealed the transformation of initially formed Cu(OH)₂ nanowires to flower-like CuO nanostructures. The hierarchical structure of the as-prepared CuO showed high electrocatalytic activity towards the oxidation of glucose making it a promising electrode material for the development of non-enzymatic glucose sensor. The amperometric sensor exhibited a wide linear response to glucose ranging from 4.5 × 10^?5 to 1.3 × 10^?3 mol L^?1 (R ² = 0.99317) at fixed potential of 0.3 V. The detection limit was 6.9 × 10^?6 mol L^?1 (LOD = 3σ/s) with a sensitivity of 1.71 μA μmol^?1 cm^?2. Moreover, the developed sensor offers a fast amperometric response, good selectivity and stability.     

Synthesis,structure and electrochemical properties of some thiosemicarbazone complexes of iridium

Reaction of thiosemicarbazones of salicylaldehyde and 2-hydroxyacetophenone (H₂L¹ and H₂L²) with [Ir(PPh₃)₃Cl] affords complexes of type [Ir(PPh₃)₂(L)(H)] (L = L¹ or L²) in ethanol. A similar reaction carried out in toluene affords the [Ir(PPh₃)₂(L)(H)] complexes along with complexes of type [Ir(PPh₃)₂(L)Cl], where a chloride is coordinated to iridium instead of the hydride. The structure of the [Ir(PPh₃)₂(L²)(H)] and [Ir(PPh₃)₂(L²)Cl] complexes has been determined by X-ray crystallography. Crystal data for [Ir(PPh₃)₂(L²)(H)]: space group, P2₁/c; crystal system, monoclinic; a=12.110(2) Å, b=17.983(4) Å, c=18.437(4) Å, β=103.42(3)°, Z=4; R ₁=0.0591, wR ₂=0.1107. Crystal data for [Ir(PPh₃)₂(L²)Cl]: space group, P2₁/c; crystal system, monoclinic; a=17.9374(11) Å, b=19.2570(10) Å, c=24.9135(16) Å, β=108.145(5)°, Z=4; R ₁=0.0463, wR ₂=0.0901. In all the complexes the thiosemicarbazones are coordinated to the metal center as dianionic tridentate O, N, S-donors and the two triphenylphosphines are trans. The complexes are diamagnetic (low-spin d? ⁶, S=0) and show intense MLCT transitions in the visible region. Cyclic voltammetry on all the [Ir(PPh₃)₂(L)(H)] and [Ir(PPh₃)₂(L)Cl] complexes shows a quasi-reversible Ir(III)–Ir(IV) oxidation within 0.55–0.78 V vs. SCE followed by an irreversible oxidation of the thiosemicarbazone within 0.91–1.27 V vs. SCE. An irreversible reduction of the thiosemicarbazone is also observed within ?1.10 to ?1.23 V vs. SCE.     

Flow injection amperometric determination of hydrogen peroxide in household commercial products with a ruthenium oxide hexacyanoferrate modified electrode

Hydrogen peroxide was determined in oral antiseptic and bleach samples using a flow-injection system with amperometric detection. A glassy carbon electrode modified by electrochemical deposition of ruthenium oxide hexacyanoferrate was used as working electrode and a homemade Ag/AgCl (saturated KCl) electrode and a platinum wire were used as reference and counter electrodes, respectively. The electrocatalytic reduction process allowed the determination of hydrogen peroxide at 0.0 V. A linear relationship between the cathodic peak current and concentration of hydrogen peroxide was obtained in the range 10–5000 μmol L^?1 with detection and quantification limits of 1.7 (S/N?=?3) and 5.9 (S/N?=?10) μmol L^?1, respectively. The repeatability of the method was evaluated using a 500 μmol L^?1 hydrogen peroxide solution, the value obtained being 1.6% (n?=?14). A sampling rate of 112 samples h^?1 was achieved at optimised conditions. The method was employed for the quantification of hydrogen peroxide in two commercial samples and the results were in agreement with those obtained by using a recommended procedure.     

RP-LC Determination of Residual Monomers in Polycarboxylate Superplasticizers

A procedure was developed for the determination of residual monomers in polycarboxylate superplasticizer by reversed-phase high performance liquid chromatography. Seven kinds of residual monomers were quantitatively determined on a SinoChrom ODS-BP (C18) column and UV detector at 205 nm. The mobile phases which were used to determine micromolecular monomers were composed of acetonitrile and phosphate buffer solution (0.05 mol L^?1, pH = 3) in the ratio of 8:92 (v/v). While the mobile phases for long side-chain monomers testing were composed of acetonitrile and phosphate buffer solution (0.05 mol L^?1, pH = 6.5) in the ratio of 40:60 (v/v). The linear response ranged from 4.0 × 10^?6?C2.0 × 10^?3 mol L^?1. The detection limit was 0.12 × 10^?5?C0.8 × 10^?5 mol L^?1. Determination of real samples showed that relative standard deviation of high conversion rate samples was 3.1?C8.7% and standard addition recovery ratio was 91.5?C102.8%. While the relative standard deviation of low conversion rate samples was less than or close to 1% and the standard addition recovery ratio was 96.3?C103.1%.     

Simultaneous Analysis of Sugars and Polyphenols in Tobacco by CZE with Amperometric Detection Based on a Cu2O/MWCNT-COOH Composite Electrode

A composite electrode was fabricated from Cu₂O powder, carboxyl-functionalized multi-wall carbon nanotubes (MWCNT-COOH), and paraffin oil in the proportions 51:17:32 (w/w). This composite electrode was used for amperometric detection (CZE–AD) in simultaneous capillary zone electrophoretic analysis of chlorogenic acid, rutin, sucrose, glucose, mannose, and fructose in tobacco samples. Under the optimum conditions, the six analytes could be separated in 100 mmol L^?1 NaOH buffer within 30 min. Good linearity was achieved in the range 1 × 10^?7–1 × 10^?4 mol L^?1 for the two polyphenols and 5 × 10^?6–1 × 10^?3 mol L^?1 for the four sugars. The detection limits (S/N = 3) for the polyphenols and sugars were as low as 10^?8 mol L^?1 and 10^?6 mol L^?1, respectively.     

Effect of Organic Loading Rate and Fill Time on the Biohydrogen Production in a Mechanically Stirred AnSBBR Treating Synthetic Sucrose-Based Wastewater

This study investigated the feasibility to produce biohydrogen of a mechanically stirred anaerobic sequencing batch biofilm reactor (AnSBBR) treating sucrose-based synthetic wastewater. The bioreactor performance (30 °C) was evaluated as to the combined effect of fill time (2, 1.5, and 1 h), cycle length (4, 3, and 2 h), influent concentration (3,500 and 5,250 mg chemical oxygen demand (COD)?L^?1) and applied volumetric organic load (AVOL_CT from 9.0 to 27.0 g COD L^?1 d^?1). AVOLs were varied according to influent concentration and cycle length (t _C). The results showed that increasing AVOL_CT resulted in a decrease in sucrose removal from 99 to 86 % and in improvement of molar yield per removed load (MYRL_S.n) from 1.02 mol H₂?mol carbohydrate^?1 at AVOL_CT of 9.0 g COD L^?1 d^?1 to maximum value of 1.48 mol H₂?mol carbohydrate^?1, at AVOL_CT of 18.0 g COD L^?1 d^?1, with subsequent decrease. Increasing AVOL_CT improved the daily molar productivity of hydrogen (MPr) from 15.28 to 49.22 mol H₂?m^?3 d^?1. The highest daily specific molar productivity of hydrogen (SMPr) obtained was 8.71 mol H₂?kg TVS^?1 d^?1 at an AVOL_CT of 18.0 g COD L^?1 d^?1. Decreasing t _C from 4 to 3 h decreased sucrose removal, increased MPr, and improved SMPr. Increasing influent concentration decreased sucrose removal only at t _C of 2 h, improved MYRL_S,n and MPr at all t _C, and also improved SMPr at t _C of 4 and 3 h. Feeding strategy had a significant effect on biohydrogen production; increasing fill time improved sucrose removal, MPr, SMPr, and MYRL_S,n for all investigated AVOL_CT. At all operational conditions, the main intermediate metabolic was acetic acid followed by ethanol, butyric, and propionic acids. Increasing fill time resulted in a decrease in ethanol concentration.