Chiral ion-pair chromatography on porous graphitized carbon using N-blocked dipeptides as counter ions

Two newly synthesized chiral di-anionic counter ions were tested for enantiomeric resolution of a set of amino alcohols on porous graphitized carbon, Hypercarb. Z-L-Aspartyl-L-proline dissolved in methanol baseline resolved nine of 12 tested racemates. One of its diastereoisomers, Z-L-aspartyl-D-proline was also tested but resulted in low separation factors, <1.1. Sodium hydroxide was added to the mobile phase in order to titrate the counter ion to its mono- or di-anionic form. Results show that the di-anionic form was found to be superior to the mono-anionic form regarding enantioselectivity. Increased content of the counter ion in the mobile phase, with constant ratio between counter ion and sodium hydroxide concentration, decreased retention but only slightly affected enantioselectivity. Increased retention and enantioselectivity were observed with decreased column temperature. Resolution factors >3 were obtained between the enantiomers in atenolol and metoprolol with a total retention time of less than 15 min. Further, all four stereoisomers of an analogue to metoprolol were separated using Hypercarb and a mobile phase of 5 mM Z-L-aspartyl-L-proline and 9 mM sodium hydroxide in methanol.     

Gradient HPLC Separation of Alkylphosphonic Acids on a Hypercarb Porous Graphitic Carbon Adsorbent with an Aqueous Formic Acid Solution as the Mobile Phase

An approach to the gradient HPLC separation of alkylphosphonic acids on a Hypercarb porous graphitic carbon adsorbent with an aqueous formic acid solution as a mobile phase is proposed. Analytes were detected using a quadrupole mass spectrometer. To increase the retention of the analytes, the chromatographic column was washed with water before the injection of a sample solution. This procedure results in a three- to fourfold increase in the retention factors of alkylphosphonic acids in comparison with the analogs described in the publications.     

Separation of Tocopheryl Acetate Isomers on Porous Graphitic Carbon

Vitamin E is a collective term for tocopherols and tocotrienols that includes isomers differing in the number and position of methyl substituents. An LC impurity method was required to determine the purity of RRR-α-tocopheryl acetate, especially with regard to the amounts of the β- and γ-isomers which have one fewer methyl substituents. Using the Hypercarb porous graphitic carbon column, a normal phase LC method was developed that separates α-, β-, γ-, and δ-tocopheryl acetates using a mobile phase of 25:85 (v/v) THF:hexane. The area response with detection at 205 nm is linear for column loadings of 0.006–10 μg of α-tocopheryl acetate. It was also noted that SRR-α-tocopheryl acetate is partially resolved from RRR-α-tocopheryl acetate under these conditions.     

LC Analysis of Hexafluorophosphate on a Monolithic Column: Application to the Analysis of Ionic Liquids

A silica-based monolithic column with tetrabutylammonium hydroxide–phthalic acid–acetonitrile as mobile phase has been used for LC analysis of hexafluorophosphate with direct conductivity detection. The effects of mobile phase composition, column temperature, and flow rate on retention of hexafluorophosphate were investigated and the optimum chromatographic conditions were selected. Common anions and tetrafluoroborate did not interfere with analysis of hexafluorophosphate. The detection limit (S/N = 3) for hexafluorophosphate was 6.2 mg L^?1. Relative standard deviation (n = 5) for peak area was 0.1%. The method was successfully used for analysis of hexafluorophosphate in ionic liquids.     

Robust UHPLC Separation Method Development for Multi-API Product Containing Amlodipine and Bisoprolol: The Impact of Column Selection

This paper describes a new and fast ultra-high pressure liquid chromatographic separation of amlodipine and bisoprolol and all their closely related compounds, for impurity profiling purposes. Computer-assisted method development was applied and the impact of several state-of-the-art stationary phase column chemistries (50 × 2.1 mm, sub-2 μm, and core–shell type materials) on the achievable selectivity and resolution was investigated. The work was performed according to quality by design principles using design of experiment with three experimental factors; namely the gradient time (t _G), temperature (T), and mobile phase pH. Thanks to modeling software, it was proved that the separation of all compounds was feasible on numerous column chemistries within <10 min, by proper adjustments of variables. It was also demonstrated that the reliability of predictions was good, as the predicted retention times and resolutions were in good agreement with the experimental ones. The final, optimized method separates 16 peaks related to amlodipine and bisoprolol within 7 min, ensuring baseline resolution between all peak-pairs.     

HPLC Determination of Glyphosate,Aminomethylphosphonic Acid,and Glufosinate Using a Hypercarb Porous Graphite Adsorbent

A method for the HPLC determination of glyphosate, aminomethylphosphonic acid, and glufosinate using the gradient separation of analytes on a Hypercarb porous graphitized carbon adsorbent and an aqueous solution of ammonium formate and ammonia as a mobile phase is proposed. Analytes are detected using quadrupole and three-quadrupole mass spectrometers. In order to increase the retention of the analytes, the chromatographic column is washed with water before the injection of a sample solution. This procedure results in a three- to fourfold increase in the retention factors of the analytes in comparison with the analogues described in the publications.     

Development and Evaluation of a New Fluorinated Double-Wall Carbon Nanotube HPLC Stationary Phase

A novel column based on silica-containing immobilized fluorinated double-wall carbon nanotubes (F-DWCNTs) was developed. This F-DWCNT stationary phase was synthesized to combine the analytical performance of carbon nanotubes and the fluorine-based unique selectivity for polar compounds. First, the chromatographic support was coated with DWCNTs in a noncovalent way to preserve the sp² internal nanotube structure. Second, the DWCNT silica particles were functionalized with fluorine atoms via a solution of Br₂ and BrF₃ at room temperature. This F-DWCNT stationary phase was applied for a variety of separations. The solute retention behaviour was particularly studied under isocratic conditions with a high fraction of ACN in the ACN/water (v/v) mobile phase. The retention factors of the solute molecule do not depend linearly on the ACN fraction, but follow a quadratic relationship. This fluorinated stationary phase separated compounds based upon a combination of hydrophobic and polar selective stationary phase interactions. This F-DWCNT appeared to work best when fluorinated or halogenated compounds were encountered. They have longer retention time, better selectivity and work well with high fraction of organic modifiers. This novel stationary phase could thus be a good choice for LC–MS experiments.     

Liquid chromatography analysis of monosubstituted sulfobutyl ether-beta-cyclodextrin isomers on porous graphitic carbon

The retention behaviour of the three positional isomers of monosubstituted sulfobutyl ether-beta-cyclodextrin was investigated on a porous graphitic carbon (PGC) column. The influence of the mobile phase composition (nature and concentration of organic and electronic modifiers) was studied as well as the effect of column temperature. These hydrophilic and anionic analytes were highly retained on the PGC stationary phase compared to octadecyl bonded phases. The retention is mainly governed by a reversed-phase mechanism with electronic interaction playing a secondary role. An increase in solute retention and efficiency with temperature was observed. Successful isocratic separation with satisfactory baseline resolution of the three isomers of monosubstituted sulfobutyl ether-beta-cyclodextrin was achieved at 75 degrees C on a Hypercarb column by using ammonium acetate as electronic modifier in water-acetonitrile (83:17). The chromatographic methodology developed can be easily used for relative quantification of each isomer within a mixture and can be applied for semi-preparative purification of each one. The evaporative light scattering detector allows the detection of these non UV-visible absorbing molecules.     

Analysis of triacylglycerols on porous graphitic carbon by high temperature liquid chromatography

The retention behaviour of several triacylglycerols (TAGs) and fats on Hypercarb, a porous graphitic carbon column (PGC), was investigated in liquid chromatography (LC) under isocratic elution mode with an evaporative light scattering detector (ELSD). Mixtures of chloroform/isopropanol were selected as mobile phase for a suitable retention time to study the influence of temperature. The retention was different between PGC and non-aqueous reversed phase liquid chromatography (NARP-LC) on octadecyl phase. The retention of TAGs was investigated in the interval 30-70 degrees C. Retention was greatly affected by temperature: it decreases as the column temperature increases. Selectivity of TAGs was also slightly influenced by the temperature. Moreover, this chromatographic method is compatible with a mass spectrometer (MS) detector by using atmospheric pressure chemical ionisation (APCI): same fingerprints of cocoa butter and shea butter were obtained with LC-ELSD and LC-APCI-MS. These preliminary results showed that the PGC column could be suitable to separate quickly triacylglycerols in high temperature conditions coupled with ELSD or MS detector.     

A Comparison of the Retention of Homologous Series and Other Test Solutes on an Ods Column and a Hypercarb Carbon Column

Abstract

When compared with an ODS column having good surface coverage and operated with pure methanole eluent, the Hypercarb column exhibits similarities in some respects and dissimilarities in others. Methylene homologues separations look similar on ODS and on Hypercarb. Their In k' increase linearly with carbon number, although much steeper on Hypercarb. The free sorption enthalpy of methylene groups is about three times higher on the carbon column. The apparent phase ratio is lower with Hypercarb by a factor of about 100. Consequently, the retention of smaller size solutes is lower than on ODS, and the sample load capacity is smaller, too. n-Alkanes and other long chain alkyl compounds exhibit an unusual behavior on Hypercarb. With increasing sample size, their peaks show a strongly fronting profile, possibly indicating a change in ret-     

Cyano bonded silica monolith—Development of an in situ modification method for analytical scale columns

This study investigates the synthesis and chromatographic behaviour of an analytical size cyanopropyl “cyano” bonded silica monolith. Surface modification was undertaken by treating a neat silica monolith with chloro(3-cyanopropyl)dimethyl silane in dry heptane over a two day period. The resulting monolith showed stability over the duration of the testing program that involved flushing the column with more than 2000 column volumes of mobile phase. Efficiency measurements before and after sylation verified that the integrity of the silica monolith itself was not affected by the modification process, the highest number of theoretical plates (N/m) using anisole was 81,650. A brief selectivity test was then undertaken to assess methylene selectivity and phenyl selectivity. Elemental analysis was used to determine the homogeneity of the carbon load throughout the monolithic bed, and was compared to two commercial C18 and one ‘self’ modified C18 silica monoliths. The development of the in situ modification is also discussed.     

Preparation,evaluation, and application of a novel reversed-phase/zwitterionic/hydrophilic interaction liquid chromatographic mixed-mode stationary phase

The present study described the preparation and application of a reversed-phase/zwitterionic/hydrophilic interaction liquid chromatography stationary phase, named as SIL-PS. The SIL-PS was prepared through a four-step reaction, chemical bonding, nucleophilic addition, SN1 substitution, and sulfonation on the silica matrix. It was featured with C₁₂ alkyl chain, quaternary ammonium, tertiary amine, and sulfonate groups. After SIL-PS was packed into the stainless steel column (150?× 2.1 mm i.d.), chromatographic parameters, including acetonitrile content, pH, and ionic strength of the mobile phase, and the column temperature, were systematically investigated to study the retention mechanism. Electrostatic adsorptive/repulsive, partition, and hydrogen-bonding interactions were demonstrated to contribute to the retention. The stability of the SIL-PS was satisfactory, with relative standard deviations of retention factors of 1.93, 2.08, and 1.90% for loxoprofen, adenosine, and liquiritin, respectively. Additionally, to investigate the separation selectivity, the non-steroidal anti-inflammatory drugs, nucleobases/nucleotides, and alkaloids/glycosides were separated; the HPLC fingerprinting of the Cortex phellodendri extract was also conducted, and the separation performance was superior to that of the C18 column in terms of peak shape, resolution, and analytical time. The results revealed that the prepared SIL-PS possessed multifunctionalities for multiretention and could be promising for complicated samples.     

Modeling the retention mechanism for high‐performance liquid chromatography with a chiral ligand mobile phase and enantioseparation of mandelic acid derivatives

The chromatographic retention mechanism describing relationship between retention factor and concentration of Cu²⁺(l ‐phenylalanine)₂ using chiral ligand mobile phase was investigated and eight mandelic acid derivatives were enantioseparated by chiral ligand exchange chromatography. The relationship between retention factor and concentration of the Cu²⁺(l ‐phenylalanine)₂ complex was proven to be in conformity with chromatographic retention mechanism in which chiral discrimination occurred both in mobile and stationary phase. Different copper(II) salts, chiral ligands, organic modifier, pH of aqueous phase, and conventional temperature on retention behavior were optimized. Eight racemates were successfully enantioseparated on a common reversed‐phase column with an optimized mobile phase composed of 6 mmol/L of l ‐phenylalanine or N,N‐dimethyl‐l ‐phenylalanine and 3 mmol/Lof copper(II) acetate or copper(II) sulfate aqueous solution and methanol.     

Supercritical fluid chromatography of metoprolol and analogues on aminopropyl and ethylpyridine silica without any additives

Metoprolol and a number of related amino alcohols and similar analytes have been chromatographed on aminopropyl (APS) and ethylpyridine (EPS) silica columns. The mobile phase was carbon dioxide with methanol as modifier and no amine additive was present. Optimal isocratic conditions for the selectivity were evaluated based on experiments using design of experiments. A central composite circumscribed model for each column was used. Factors were column temperature, back-pressure and % (v/v) of modifier. The responses were retention and selectivity versus metoprolol. The % of modifier mainly controlled the retention on both columns but pressure and temperature could also be important for optimizing the selectivity between the amino alcohols. The compounds could be divided into four and five groups on both columns, with respect to the selectivity. Furthermore, on the aminopropyl silica the analytes were more spread out whereas on the ethylpyridine silica, due to its aromaticity, retention and selectivity were closer. For optimal conditions the column temperature and back-pressure should be high and the modifier concentration low. A comparison of the selectivity using optimized conditions show a few switches of retention order between the two columns. On aminopropyl silica an aldehyde failed to be eluted owing to Schiff-base formation. Peak symmetry and column efficiency were briefly studied for some structurally close analogues. This revealed some activity from the columns that affected analytes that had less protected amino groups, a methyl group instead of isopropyl. The tailing was more marked with the ethylpyridine column even with the more bulky alkyl substituents. Plate number N was a better measure than the asymmetry factor since some analyte peaks broadened without serious deterioration of symmetry compared to homologues.     

Simple and Efficient Solution for Robustness Testing in Gradient Elution Liquid Chromatographic Methods

In this paper, an efficient way for robustness testing of gradient elution liquid chromatographic methods is proposed and tested on model mixtures comprising cilazapril, hydrochlorothiazide, and their degradation products, solutes that differ not only in polarities, but also in solubility and absorption characteristics. In general, the robustness could be tested with respect to various responses: resolution, retention factor, selectivity factor, change of detector response, etc. In chromatographic methods, the separation of the adjacent peaks is mandatory, and, consequently, the resolution is usually used as response. In isocratic elution methods, the resolution threshold depends on many factors, such as sizes of adjacent peaks, peak shapes, and asymmetry factor. At the same time, the situation is even more complex in gradient elution methods, because separation depends on a larger number of parameters, such as gradient profile, column geometry, mobile phase flow rate, column equilibration between gradient runs, etc. To ensure baseline separation, the authors propose application of separation criterion (s) as response and indirect modeling in the robustness evaluation. Examined response in this approach is represented by the difference between the retention time of the beginning of the peak and the retention time of the end of the previously eluting peak of the critical pair. Moreover, the proposed methodology included reusing experiments from the optimization phase to define a robust chromatographic region without increasing the number of experiments. It was shown that method robustness can be easily and efficiently evaluated by this methodology.     

Simultaneous Determination of Dextromethorphan Hydrobromide, Pyrilamine Maleate and Sodium Benzoate in a Cough Cold Syrup by LC

A liquid chromatographic method for the simultaneous determination of dextromethorphan hydrobromide, pyrilamine maleate and sodium benzoate in cough cold syrup has been developed. The method was based on replacing heptane sulfonate by sodium chloride as ion pairing agent. The addition of sodium chloride to the mobile phase has changed the retention behaviour of the basic drugs. The separation of these compounds was achieved in less than 8 min with an isocratic mobile phase consisting of acetonitrile/0.1 M dihydrogenphosphate buffer containing 0.1 M sodium chloride (29:71 v/v) at pH 2.5 and using a Kromasil C18 column. The analysis was performed at a flow rate of 1 mL min^?1 and at a detection wavelength of 220 nm. The selectivity, linearity of calibration, accuracy, within and between days precision, limit of detection and quantification, recovery were examined as parts of the method validation. Calibration curves were linear in the range 1–140 μg mL^?1 with a regression coefficient (R ²) better than 0.999. The results of the method repeatability (intra-day) and reproducibility (inter-day) were all less than 2% (n = 6). The lowest detectable concentration of dextromethorphan hydrobromide and pyrilamine maleate varied between 0.10 and 0.12 μg mL^?1. The proposed liquid chromatographic method was satisfactorily applied for the routine quality control of dextromethorphan hydrobromide, pyrilamine maleate and sodium benzoate in cough cold syrup formulations.     

LC Separation of para and meta Isomers of Zafirlukast in Bulk Drug Samples and Pharmaceutical Dosage Forms Using a Chiral Stationary Phase

A simple, rapid and sensitive high performance liquid chromatographic method was developed for the separation and quantification of positional isomers of zafirlukast in bulk drugs and dosage forms using a chiral column. Elution time was 20 min in normal phase mode and ultra violet detection was carried out at 240 nm. Efficient separation was achieved on an immobilized amylose-based Chiralpak-IA column using n-hexane/ethanol/trifluoroacetic acid/diethyl amine (65:35:0.1:0.1, v/v) as the mobile phase. Resolutions between ortho, meta and para isomers of zafirlukast were found to be >3.0. The active pharmaceutical ingredient was extracted from tablets using tetrahydrofuran. The calibration graphs for meta and para isomers of zafirlukast were linear (r ² > 0.999) when ranging from the limit of quantitation to 0.3%. The method showed excellent recoveries for both zafirlukast isomers identified in bulk and formulated products. The test solution was found to be stable in the mobile phase for 48 h after preparation. The developed LC method was validated with respect to linearity, accuracy, precision and robustness.     

Dual Retention Mechanism in Two-Dimensional LC Separations of Barbiturates,Sulfonamides, Nucleic Bases and Nucleosides on Polymethacrylate Zwitterionic Monolithic Micro-Columns

In-house prepared zwitterionic polymethacrylate micro-columns using in situ polymerization of N,N-dimethyl-N-metacryloxyethyl-N-(3-sulfopropyl) ammonium betaine (MEDSA) functional monomer with bisphenol A glycerolate dimethacrylate (BIGDMA) cross-linker provided excellent stability and reproducibility of preparation and separation efficiency of 60,000–70,000 theoretical plates m⁻¹ for small molecules under isocratic conditions. The column showed a dual retention mechanism, reversed-phase (RP) in highly aqueous mobile phases and aqueous normal-phase (HILIC) in acetonitrile-rich mobile phases. This property can be used to obtain complementary separation and combined information on the sample from repeated injections of a sample on a single column, in different mobile phases characteristic for the HILIC and for the RP modes, which is in fact a form of offline two-dimensional chromatography on a single column. The dual retention mechanism has been observed with a variety of columns, however, often with impractically narrow retention range in one of the two modes. To take full advantage from the combined single-column RP–HILIC experiments, the column should provide a sufficiently broad mobile phase interval both in the RP and in the HILIC mode. The BIGDMA-MEDSA micro-columns proved suitable earlier for the combined RP–HILIC separations of some phenolic compounds and flavonoids. In the present work, we investigated the effects of the mobile phase composition on the retention of a variety of polar compounds over full retention range of buffered aqueous acetonitrile mobile phases, to find potentially useful HILIC and RP retention ranges for barbiturates, sulfonamides, nucleosides and nucleic bases. In the HILIC mode, proton donor–acceptor interactions show a major effect on retention and selectivity of separation, whereas the size of the non-polar hydrocarbon part of the sample molecule is the most important factor in the water-rich mobile phases. The sample structure strongly affects the composition of aqueous–organic mobile phases at which the transition between the two retention modes occurs. Of the investigated sample types, barbiturates show better separation under reversed-phase conditions, whereas nucleosides and nucleic bases in the HILIC mode. Aromatic carboxylic acids and sulfonamides can be separated either in the reversed phase or under HILIC conditions, the two separation modes showing complementary selectivity of separation.

     

Determination of Dutasteride by LC: Validation and Application of the Method

A simple, rapid, and stability-indicating reversed-phase high-performance liquid chromatographic (LC) method for analysis for dutasteride has been successfully developed. Chromatography was performed on a 150 mm × 4.6 mm C₁₈ column with acetonitrile–water 60:40 (v/v) as isocratic mobile phase at 1.0 mL min^?1. Ultraviolet detection of dutasteride was at 210 nm. Its retention time was approximately 10 min and its peak was symmetrical. Response was a linear function of concentration over the range 0.2–1 μg mL^?1 (R ² = 0.997) and the limits of detection and quantitation were was 0.05 and 0.10 μg mL^?1, respectively. The method was validated for linearity, precision, repeatability, sensitivity, and selectivity. Selectivity was validated by subjecting dutasteride stock solution to photolytic, acidic, basic, oxidative, and thermal degradation. The peaks from the degradation products did not interfere with that from dutasteride. The method was used to quantify dutasteride in pharmaceutical preparations.     

Green chromatography separation of analytes of greatly differing properties using a polyethylene glycol stationary phase and a low-toxic water-based mobile phase

A simple, rapid, and environmentally friendly HPLC method was developed and validated for the separation of four compounds (4-aminophenol, caffeine, paracetamol, and propyphenazone) with different chemical properties. A “green” mobile phase, employing water as the major eluent, was proposed and applied to the separation of analytes with different polarity on polyethylene glycol (PEG) stationary phase. The chromatography separation of all compounds and internal standard benzoic acid was performed using isocratic elution with a low-toxicity mobile phase consisting of 0.04 % (v/v) triethylamine and water. HPLC separation was carried out using a PEG reversed-phase stationary phase Supelco Discovery HS PEG column (15?×?4 mm; particle size 3 μm) at a temperature of 30 °C and flow rate at 1.0 mL min^?1. The UV detector was set at 210 nm. In this study, a PEG stationary phase was shown to be suitable for the efficient isocratic separation of compounds that differ widely in hydrophobicity and acid–base properties, particularly 4-aminophenol (log P, 0.30), caffeine (log P, ?0.25), and propyphenazone (log P, 2.27). A polar PEG stationary phase provided specific selectivity which allowed traditional chromatographic problems related to the separation of analytes with different polarities to be solved. The retention properties of the group of structurally similar substances (aromatic amines, phenolic compounds, and xanthine derivatives) were tested with different mobile phases. The proposed green chromatography method was successfully applied to the analysis of active substances and one degradation impurity (4-aminophenol) in commercial preparation. Under the optimum chromatographic conditions, standard calibration was carried out with good linearity correlation coefficients for all compounds in the range (0.99914–0.99997, n?=?6) between the peak areas and concentration of compounds. Recovery of the sample preparation was in the range 100?±?5 % for all compounds. The intraday method precision was determined as RSD, and the values were lower than 1.00 %.