Zinc isotope separation in acetone by displacement chromatography using benzo-15-crown-5 resin

Zinc isotope separation was studied by column chromatographies using resorcinol-formaldehyde-resin grafted with benzo-15-crown-5 in the porous silica beads. Chromatography was performed in a break-through manner by feeding the acetone solution of zinc chloride into the columns. Zinc isotopic abundance ratios of ⁶⁶Zn/⁶⁴Zn and ⁶⁸Zn/⁶⁴Zn were measured by ICP-MS. It has been found that the heavier isotopes are preferentially enriched at the front boundary region. This result proves ⁶⁴Zn depleted zinc can be obtained by collecting the effluents of front boundary region. The separation coefficient (ɛ) observed by five meters migration treatment is 0.81 · 10⁻³ for the isotopic pair of ⁶⁸Zn/⁶⁴Zn at 25 °C and higher separation coefficient was obtained from more concentrated zinc chloride solution.     

Studies on the production feasibility of 64Cu by (n, p) reactions on Zn targets in Dhruva research reactor

⁶⁴Cu is an useful radionuclide for both PET imaging and targeted therapy, as it decays by three different modes, namely, electron capture (41%), ??^? (40%) and positron emission (19%). ⁶⁴Cu is generally produced by ⁶⁴Ni (p, n) reaction in a cyclotron for medical use. High specific activity ??no carrier added?? grade ⁶⁴Cu by ⁶⁴Zn (n, p) route is an alternative for research studies and was hence explored. 10?mg zinc foil target (48.63% in ⁶⁴Zn) was irradiated in the medium flux reactor Dhruva at a thermal neutron flux of ~5.6?×?10¹³ n?cm^?2?s^?1 for 3?days. The irradiated Zn foil was dissolved in 5?mL 10?M HCl and ⁶⁴Cu was separated by anion exchange chromatography (Dowex 1?×?8; 100?C200 mesh) at 3?M HCl conditions. ⁶⁴Cu radioactivity content and its radionuclide purity were ascertained by ??-ray spectrometry using HPGe detector coupled to a 4?K multichannel analyser system. Radiochemical separation yielded a radionuclidic purity of 99.9% ⁶⁴Cu.     

Estimation of free acidity in some hydrolysable metal ions present in reprocessing streams by fiber optic aided spectrophotometry

A fiber optic aided spectrophotometric technique has been developed for the determination of free acidity in nuclear fuel reprocessing streams. In this method, nitric acid forms yellow colour complex with chrome azurol s. The system obeys Lambert–Beer’s law at 542 nm in the range of acidity 4–14 M. The molar absorption coefficient (ε) and Sandell’s sensitivity (S) of complex are 5.23 × 10³ L.mol^?1.cm^?1 and 1.91 × 10^?4 µg/cm² respectively. Relative standard deviation is less than 1 % and correlation coefficient is 0.999. Results of the present method are in good agreement with those obtained by the standard procedure.     

Green and efficient extraction strategy to lithium isotope separation with double ionic liquids as the medium and ionic associated agent

The paper reported a green and efficient extraction strategy to lithium isotope separation. A 4-methyl-10-hydroxybenzoquinoline (ROH), hydrophobic ionic liquid—1,3-di(isooctyl)imidazolium hexafluorophosphate ([D(i-C₈)IM][PF₆]), and hydrophilic ionic liquid—1-butyl-3-methylimidazolium chloride (ILCl) were used as the chelating agent, extraction medium and ionic associated agent. Lithium ion (Li⁺) first reacted with ROH in strong alkali solution to produce a lithium complex anion. It then associated with IL⁺ to form the Li(RO)₂IL complex, which was rapidly extracted into the organic phase. Factors for effect on the lithium isotope separation were examined. To obtain high extraction efficiency, a saturated ROH in the [D(i-C₈)IM][PF₆] (0.3 mol l^?1), mixed aqueous solution containing 0.3 mol l^?1 lithium chloride, 1.6 mol l^?1 sodium hydroxide and 0.8 mol l^?1 ILCl and 3:1 were selected as the organic phase, aqueous phase and phase ratio (o/a). Under optimized conditions, the single-stage extraction efficiency was found to be 52 %. The saturated lithium concentration in the organic phase was up to 0.15 mol l^?1. The free energy change (ΔG), enthalpy change (ΔH) and entropy change (ΔS) of the extraction process were ?0.097 J mol^?1, ?14.70 J mol K^?1 and ?48.17 J mol^?1 K^?1, indicating a exothermic process. The partition coefficients of lithium will enhance with decrease of the temperature. Thus, a 25 °C of operating temperature was employed for total lithium isotope separation process. Lithium in Li(RO)₂IL was stripped by the sodium chloride of 5 mol l^?1 with a phase ratio (o/a) of 4. The lithium isotope exchange reaction in the interface between organic phase and aqueous phase reached the equilibrium within 1 min. The single-stage isotope separation factor of ⁷Li–⁶Li was up to 1.023 ± 0.002, indicating that ⁷Li was concentrated in organic phase and ⁶Li was concentrated in aqueous phase. All chemical reagents used can be well recycled. The extraction strategy offers green nature, low product cost, high efficiency and good application prospect to lithium isotope separation.     

Solid-state ion selective electrode based on polypyrrole conducting polymer nanofilm as a new potentiometric sensor for Zn2+ ion

A pencil graphite electrode (PGE) electrodeposited by a polypyrrole conducting polymer doped with tartrazine (termed as PGE/PPy/Tar) was prepared and used as a zinc (II) solid-state ion-selective electrode. For the preparation of the zinc sensor electrode, electrodeposition of a polypyrrole nanofilm was carried out potentiostatically (E _app?=?0.75 V vs SCE) in a solution containing 0.010 M pyrrole and 0.001 M tartrazine trisodium salt. A pencil graphite and Pt wire were used as working and auxiliary electrodes, respectively. The introduced electrode in the current paper can be fabricated simply and was found to possess high selectivity, exhibited wide working concentration range, sufficiently rapid response, potential stability, and very good sensitivity to Zn (II) ion. The sensor electrode showed a linear Nernstian response over the range of 1.0?×?10^?5 to 1.0?×?10^?1 M with a slope of 28.23 mV per decade change in zinc ion concentration. A detection limit of 8.0?×?10^?6 M was obtained. The optimum pH working of the electrode was found to be 5.0.     

Determination of Flavonoid Markers in Honey with SPE and LC using Experimental Design

Determination of flavonoid markers quercetin, hesperetin, and chrysin, found in north Iranian citrus honey samples, was carried out by solid phase extraction (SPE) and isocratic liquid chromatographic separation using central composite design. Optimum conditions for SPE were achieved using 10 mL methanol/water (13:87, v/v, pH = 7) as the washing solvent and 4 mL methanol for elution. Good clean-up and high recovery >90% were observed for all analytes. The use of water/ACN/THF/AcOH (54:36:5:5, v/v) was found to serve as the optimum mobile phase composition and allowed for the separation of analytes from endogenous compounds present in honey. SPE parameters, such as maximum loading capacity and breakthrough volume, were also determined for each analyte. Limit of detection, linear range, recovery, repeatability of retention times, and peak heights were 3.11 × 10^?8–4.44 × 10^?8 g g^?1, 0.50–50.0 μg mL^?1 (R ² > 0.99), 90.7–96.9%, 3.0–3.6%, and 1.0–2.6%, respectively. Precision of the overall analytical procedure, estimated by five replicate measurements for quercetin, hesperetin and chrysin in citrus honey, as well as the relative standard deviations were 4.3%, 3.8%, and 5.5%, respectively.     

Flow‐Injection Spectrophotometric Determination of N‐acetylcysteine in Pharmaceutical Formulations with On‐Line Solid‐Phase Reactor Containing Zn(II) Phosphate Immobilized in a Polyester Resin

Abstract

A flow‐injection spectrophotometric procedure was developed for determining N‐acetylcysteine in pharmaceutical formulations. The sample was dissolved in deionized water and 400 µl of the solution was injected into a carrier stream of 1.0×10^?2 mol l^?1 sodium borate solution. The sample flowed through a column (70 mm length×2.0 mm i.d.) packed with Zn₃(PO₄)₂ immobilized in a polymeric matrix of polyester resin and Zn(II) ions were released from the solid‐phase reactor because of the formation of the Zn(II) (N‐acetylcysteine)₂ complex. The mixture merged with a stream of borate buffer solution (pH 9.0) containing 5.0×10^?4 mol l^?1 Alizarin red S and the Zn(II)Alizarin red complex formed was measured spectrophotometrically at 540 nm. The analytical curve was linear in the N‐acetylcysteine concentration range from 3.0×10^?5 to 1.5×10^?4 mol l^?1 (4.9 to 24.5 µg ml^?1) with a detections limit of 8.0×10^?6 mol l^?1 (1.3 µg ml^?1). The relative standard deviations (RSDs) were smaller than 0.5% (n=10) for solutions containing 5.0×10^?5 mol l^?1 (8.0 µg ml^?1) and 8.0×10^?5 mol l^?1 (13.0 µg ml^?1) of N‐acetylcysteine, and the analytical frequency was 60 determinations per hour. A paired t‐test showed that all results obtained for N‐acetylcysteine in commercial formulations using the proposed flow‐injection procedure and a comparative procedure agreed at the 95% confidence level.     

Effect of Tb content on microstructure and ferroelectric properties of Bi4−x Tb x Ti3O12 thin films grown by sol–gel method

The effects of Tb substitution on the structural and electrical properties of ferroelectric Bi₄Ti₃O₁₂ (BTO) thin films grown on Pt/TiO₂/SiO₂/Si substrates by a sol–gel process have been reported. X-ray diffraction indicated A-site Tb substitutions did not change the polycrystalline bi-layered Aurivillius structure of the BTO, but a lattice distortion was observed. The leakage current behavior at room temperature of the films was studied and it was found that the leakage current density decreased from 10^?2 to 10^?4 A/cm² with the increase of x under 150 kV/cm. The remnant polarization (2P _r ) and dielectric constant (ε _r) increase firstly and then decreases with the increase of the Tb content. We observed a substantial increase in the remnant polarization (2P _r ) with Tb substitution and obtained a maximum value of~60 μC/cm² at an applied electric field of 500 kV/cm for x = 0.4. Moreover, this BTT-0.4 capacitor did not show fatigue behaviors after 1.0 × 10¹⁰ switching cycles, suggesting an anti-fatigue character.     

A novel and simple biosensor based on poly(indoleacetic acid) film and its application for simultaneous electrochemical determination of dopamine and epinephrine in the presence of ascorbic acid

A novel and simple biosensor based on poly(indoleacetic acid) film-modified electrode (PIAA/CPE) was fabricated by electrochemical polymerization of indoleacetic acid on a carbon paste electrode (CPE) through cyclic voltammetry. The resulting electrode was characterized by scanning electron microscopy, and the electrochemical behaviors of dopamine (DA) and epinephrine (EP) at the electrode were studied. It was illustrated that PIAA/CPE had excellent electrochemical catalytic activities toward DA and EP. The anodic peak currents (I _pa) were dramatically enhanced by about seven-fold for DA and ten times for EP at PIAA/CPE. Thus, the determinations of DA and EP were carried out using PIAA/CPE successfully. The linear responses were obtained in the range of 3.0?×?10^?7～7.0?×?10^?4 and 1.0?×?10^?6 ～8.0?×?10^?4 mol L^?1 with the detection limits (3σ) of 1?×?10^?7 and 4?×?10^?7 mol L^?1 corresponding with DA and EP, respectively. Moreover, the cathodic peaks of DA and EP were well-separated with a potential difference about 325 mV in pH 5.3 phosphate-buffered saline, so simultaneous determination of DA and EP was carried out in this paper. Additionally, the interference studies showed that the PIAA/CPE exhibited excellent selectivity in the presence of ascorbic acid (AA). With good selectivity and sensitivity, the present method has been successfully applied to the determination of DA and EP in pharmaceutical samples.     

A comparative study of the complexation of Am(III) and Eu(III) with TODGA in room temperature ionic liquid

On the growing awareness of the environmental impact associated with the use of volatile organic diluents, room temperature ionic liquid gained world-wild acceptance as environmentally benign diluents for actinide partitioning. The observed unusual behavior of less extraction efficiency of Eu with TODGA in RTIL in comparison with that of Am-TODGA was addressed in this paper. The stoichiometry of Am-TODGA complex was found to be 1:2 while that of Eu-TODGA was 1:1. More the ligand molecules associated in the metal ligand complex, the organophilicity of the complex will be more and the solubility of the metal–ligand complex in RTIL will be more which reflects in the higher distribution ratio for Am. In RTIL both Am and Eu showed slower kinetics of extraction with TODGA which can be attributed to the high viscosity coefficient of RTIL compared to the molecular diluents. The observed slower kinetics of extraction was quantified and found to follow first order kinetics with the rate constant of 5.5 × 10^?4 s^?1. The formation constant of Am-TODGA complex was found to be more (4.18 × 10⁸ M^?1) than Eu-TODGA complex (3.31 × 10⁸ M^?1) in RTIL. The parameters viz. diffusion coefficient, activation energy for Eu(III)/Eu(II) were determined and found to be 3.08 × 10^?8/cm² s^?1 (at 303 K) and 39.34 kJ mol^?1 respectively. The thermodynamic parameters ΔG, ΔH and ΔS for the reaction were evaluated using the linear regression of the plot of E ^0* versus T. The redox reaction was found to be exothermic with decrease in entropy value.     

Cyclodextrin-Modified Gold Nanoparticle Capillary Electrochromatography with Online Sample Stacking for Simultaneous and Sensitive Determination of Aminobenzoic Acid Isomers

A newly-developed method of complete separation and sensitive determination of o-, m-, and p-aminobenzoic acid isomers was achieved by combining open-tubular columns for capillary electrochromatography (OT-CEC) and online sample stacking. In this study, spherical gold nanoparticles were modified by a covalent attachment of mono-6-thio-β-cyclodextrin, and OT-CEC was formed by immobilizing cyclodextrin-modified gold nanoparticles (CD-AuNP) on prederivatized 3-mercaptopropyl-trimethoxysilane fused-silica capillaries. Based on the theory of moving chemical reaction boundary, effects of several important factors such as the pH and concentration of running buffer and the conditions of stacking analytes were optimized. The optimized separations were carried out in 58 mmol/L HAc buffer at pH 3.0 using a capillary coated with CD-AuNP, while the optimized concentration was carried out in 50 mmol/L disodium hydrogen phosphate (pH 9.5). The linear ranges for m-, p-, and o-aminobenzoic acid were from 5.0 × 10^?4–0.1, 5.0 × 10^?4–0.1 and 1.0 × 10^?4–0.1 mmol/L, respectively. And the detection limits (S/N = 3) were as low as 8.22 × 10^?5, 8.21 × 10^?5, and 3.76 × 10^?5 mmol/L for m-, p-, and o-aminobenzoic acid, respectively. The run-to-run, day-to-day, and column-to-column reproducibilities of migration time were satisfactory with relative standard deviation values of less than 4.5 % in all cases. This method was successfully used in determining procaine hydrochloride injection sample with recoveries in the range of 96.1–106.6 % and relative standard deviations less than 5.0 %.     

Simultaneous Determination of Nickel and Cobalt as Chelates with 1-(2-Pyridylazo)-2-naphthol Using an LC Switching Column Method

A simple liquid chromatographic method was developed for the separation and simultaneous determination of cobalt and nickel as chelates with 1-(2-pyridylazo)-2-naphthol (PAN). The method, using a switching column technique for the on-line purification and separation, enables to reach the sub-microgram per litre concentration level excluding off-line sample treatment with the exception of the derivatization reaction. Two small-sized columns packed with CN- and C₄-bonded stationary phases were selected and used considering their complementary behaviour with respect to chelated Co and Ni ions. The analysis was performed within 10 min using an optimised eluent (water–acetonitrile–methanol–tetrahydrofuran, 40:45:10:5, v/v/v/v) containing Tween 40 (10^?3 M) and acetate buffer (5 × 10^?3 M, pH 4.8). Detection was performed by UV-vis spectrophotometry (λ = 565 nm) permitting to reach quantification limits of 0.9 and 0.5 μg L^?1 for Co and Ni, respectively.     

Direct electrochemical behavior of cytochrome c, and its determination on phytic acid modified electrode

Phytic acid (PA) with its unique structure was attached to a glassy carbon electrode (GCE) to form PA/GCE modified electrode which was characterized by electrochemical impedance. The electrochemical behavior of cytochrome c (Cyt c) on the PA/GCE modified electrode was explored by cyclic voltammetry and differential pulse voltammetry. The Cyt c displayed a quasi-reversible redox process on PA modified electrode pH 7.0 phosphate buffer solution with a formal potential (E ^0′) of 57 mV (versus Ag/AgCl). The peak currents were linearly related to the square root of the scan rate in the range of 20–120 mV·s^?1. The electron transfer rate constant was determined to be 12.5 s^?1. The PA/GCE modified electrode was applied to the determination of Cyt c, in the range of 5?×?10^?6 to 3?×?10^?4 M, the currents increase linearly to the Cyt c concentration with a correlation coefficient 0.9981. The detection limit was 1?×?10^?6 M (signal/noise?=?3).     

Characterization of neutron transmuted zinc traces in pure copper materials by isotope dilution mass spectrometry

The neutron transmutation doping (NTD) of highly pure copper with zinc was investigated as a promising means of achieving controlled gradation of the zinc content in the range 1–20 μg g^–1. The doping process leads to the enrichment of two stable isotopes ⁶⁴Zn and ⁶⁶Zn in a ratio which differs from that of natural isotopic distribution. Mass spectrometric investigations by thermal ionization mass spectrometry (TIMS) were performed to validate the results obtained by gamma spectrometry. The investigations included both determination of the isotopic ratios of the doped zinc isotopes and the analysis of the accumulated zinc contents by isotope dilution (ID) analysis. Thereby a sample-specific correction of the blank could be performed because the isotope ⁶⁸Zn was not influenced, because of the transmutation process. The results obtained by TIMS prove the strict proportionality of the doped zinc content, in the range 5 to 20 μg g^–1, to the neutron fluence. Comparison with gamma spectrometric results showed a very good agreement within the uncertainties.     

Direct electrochemistry and electrochemical biosensing of glucose oxidase based on CdSe@CdS quantum dots and MWNT-modified electrode

The direct electron transfer of glucose oxidase (GOx) was achieved based on the immobilization of CdSe@CdS quantum dots on glassy carbon electrode by multi-wall carbon nanotubes (MWNTs)-chitosan (Chit) film. The immobilized GOx displayed a pair of well-defined and reversible redox peaks with a formal potential (E ^θ’) of ?0.459 V (versus Ag/AgCl) in 0.1 M pH 7.0 phosphate buffer solution. The apparent heterogeneous electron transfer rate constants (k _s) of GOx confined in MWNTs-Chit/CdSe@CdS membrane were evaluated as 1.56 s^?1 according to Laviron's equation. The surface concentration (Γ*) of the electroactive GOx in the MWNTs-Chit film was estimated to be (6.52?±?0.01)?×?10^?11?mol?cm^?2. Meanwhile, the catalytic ability of GOx toward the oxidation of glucose was studied. Its apparent Michaelis–Menten constant for glucose was 0.46?±?0.01 mM, showing a good affinity. The linear range for glucose determination was from 1.6?×?10^?4 to 5.6?×?10^?3?M with a relatively high sensitivity of 31.13?±?0.02 μA?mM^?1?cm^?2 and a detection limit of 2.5?×?10^?5?M (S/N=3).     

Nonextractive Trace Level Simultaneous Determination of Mercury(II) and Zinc(II) in Environmental Samples with 2‐(5‐Bromo‐2‐pyridylazo)‐5‐diethylaminophenol and Cetylpyridinium Chloride

Abstract

A simple, rapid, selective, and sensitive method for the derivative spectrophotometric determination of Hg(II) and its simultaneous determination in the presence of Zn(II) using 2‐(5‐bromo‐2‐pyridylazo)‐5‐diethylaminophenol in the presence of cetylpyridinium chloride, a cationic surfactant, has been developed. The molar absorption coefficient and analytical sensitivity of the 1∶1 Hg(II) complex at 558 nm (λ_max) are 5.78×10⁴ L mol^?1 cm^?1 and 0.67 ng mL^?1, respectively. The detection limit of Hg(II) is 1.40×10^?2 ng mL^?1, and Beer's law is valid in the concentration range 0.05–2.40 µg mL^?1. Overlapping spectral profiles of Hg(II) and Zn(II) complexes in zero‐order mode interfere in their simultaneous determination. However, 0.10–2.00 µg mL^?1 of Hg(II) and 0.065–0.650 µg mL^?1 of Zn(II), when present together, can be simultaneously determined at zero cross point of the derivative spectrum, without any prior separation. The relative standard deviation for six replicate measurements of solutions containing 0.134 µg mL^?1 of Hg(II) and 0.620 µg mL^?1 of Zn(II) is 1.72 and 1.47%, respectively. The proposed method has successfully been evaluated for trace level simultaneous determination of Hg(II) and Zn(II) in environmental samples.     

4-Aminothiophenol functionalized gold nanoparticles as colorimetric sensors for the detection of cobalt using UV–Visible spectrometry

The 4-aminothiophenol functionalized gold nanoparticles (4-ATP-Au NPs) were used as colorimetric sensors for the detection of Co²⁺ in aqueous solution by using UV–Visible spectrometry. The 4-ATP-Au NPs were characterized by UV–Visible, FT-IR, TEM and dynamic light scattering (DLS) which confirmed their higher binding affinity towards Co²⁺ through coordinate covalent interactions that can be observed with the naked eye. The absorbance ratio (A₅₇₀/A₅₂₃) was linear with Co²⁺ concentration in the range of 15 × 10^?3 to 1 × 10^?3 M with a correlation coefficient of (R ²) 0.994, and the limit of detection was 5.79 × 10^?5 M.     

Chromatographic zinc isotope separation by phenol formaldehyde benzo crown resin

New types of phenol formaldehyde resin having benzo crown as a functional group were synthesized and applied to zinc isotope chromatographic operation. Zinc adsorption and isotope separation capacities were dramatically improved by using phenol formaldehyde benzo-15-crown-5 resin. Zinc batch adsorption tests were performed by various dehydrated organic solvents. Separation coefficient, epsilon 8.1 x 10(-4) and height equivalent to a theoretical plate (HETP) 0.105 cm for the isotopic pair of 68Zn/64Zn in phenol formaldehyde benzo-15-crown-5 resin were obtained in the case of acetone as the solvent at 298+/-1K.     

Effect of EDTA on the diffusion behavior of 99TcO4 − and ReO4 − in GMZ bentonite

Polyaminopolycarboxylate EDTA with powerful metal-binding property, which often presents in low and intermediate-level waste, can enhance the radionuclide migration. The effect of EDTA on the diffusion behavior of ⁹⁹TcO₄ ^? and ReO₄ ^? in Gaomiaozi (GMZ) bentonite was investigated by using through-diffusion method. For ⁹⁹TcO₄ ^? in present of EDTA, the D _e values was (1.2 ± 0.1) × 10^?11 m²/s, which was 4 times higher than that in absent of EDTA. It can be explained that the complexation between ⁹⁹TcO₄ ^? and EDTA might be formed. By contrast, the D _e values of ReO₄ ^? remained unchanged in present or absent of EDTA, indicating that ReO₄ ^? could not complex with EDTA. However, the diffusion of ReO₄ ^? could be increased in present of EDTA, the D _a value was found to be increased from 1.8 × 10^?10 to 5.4 × 10^?10 m²/s. It demonstrated that ReO₄ ^? need more drastic conditions to form the Re(VII)–EDTA complexes than those used for ⁹⁹TcO₄ ^?. For both ReO₄ ^? and ⁹⁹TcO₄ ^?, the rock capacity factor α is less than the total porosity ε _tot, indicating that they has little retention/sorption on the surface of bentonite.     

Proton-conducting membranes: poly (N-vinyl pyrrolidone) complexes with various ammonium salts

The present study focuses on the proton-conducting polymer electrolytes; poly (N-vinyl pyrrolidone)–ammonium thiocyanate and poly (N-vinyl pyrrolidone)–ammonium acetate prepared by solution casting technique. The XRD analysis indicates the amorphous nature of the polymer electrolytes. The Raman spectra of the C=O vibration of pure polymer PVP at 1,663 cm^?1 has been appeared as doublet in the polymer electrolytes. The introduction of this new peak in the salt-doped polymer electrolytes may be due to interaction of the cation with the polymer. The room temperature ionic conductivity σ _303κ has been found to be high, 1.7?×?10^?4 S cm^?1 for 80 mol% PVP–20 mol% NH₄SCN and 1.5?×?10^?6 S cm^?1 for 75 mol% PVP–25 mol% CH₃COONH₄. The polymer electrolytes have been tested for their application in Zn–air battery.