A Simple Method for Determination of Homologue Imidazolium Cations in Ionic Liquids Using IC with Direct Conductivity Detection

An investigation was carried out into the fast determination of five homologue imidazolium cations in ionic liquids by ion chromatography using a cation-exchange column and direct conductivity detection. Ethylenediamine, complex organic acid (citric acid, oxalic acid and tartaric acid) and organic modifiers (acetonitrile) were used as mobile phase. The influences of the eluent types, eluent concentration, eluent pH and column temperature on separation of the cations were discussed. Simultaneous separation and determination of the five homologue imidazolium cations in ionic liquids were achieved under an optimum condition. The optimized mobile phase was consisted of 0.25 mmol L^?1 ethylenediamine + 0.5 mmol L^?1 citric acid + 3% acetonitrile (v/v) (pH 4.1), set at a flow rate of 1.0 mL min^?1. The column temperature was 40 °C and detection limits were obtained in the range of 1.1–45.6 mg L^?1. The relative standard deviations of the chromatographic peak areas for the cations were <3.0% (n = 5). This method was successfully applied to separate imidazolium cations in ionic liquids produced by organic synthesis. The recoveries of spiked components were 92.5–101.9%.     

Determination of Homologue Imidazolium Ionic Liquid Cations by Ion Chromatography Using a Carboxyl Acid Cation-Exchange Column with Direct Conductivity Detection

An investigation into the determination of four imidazolium ionic liquid cations by ion chromatography using a carboxyl acid cation exchange column and direct conductivity detection was carried out. This research has developed a simple, selective, and accurate ion chromatographic method for separation of imidazolium ionic liquid cations. Detection limits (S/N = 3) for the cations were 3.2–24.3 mg/L. Relative standard deviations (RSD, n = 5) for peak areas were less than 1.6%. The method has been successfully applied to the determination of two ionic liquids synthesized by organic chemistry lab.     

Use of Ionic liquids as additives in ion exchange chromatography for the analysis of cations

The behavior of acids (citric acid, nitric acid, oxalic acid, tartaric acid) as a mobile phase and imidazolium ionic liquids (the bromides, tetrafluoroborates and hexafluorophosphates of 1‐ethyl, 1‐butyl, and 1‐hexyl‐3‐methylimidazolium) as additives in ion exchange chromatography for cations (Na⁺, K⁺, Mg²⁺, Ca²⁺) separation were studied. The results showed that nitric acid and 1‐hexyl‐3‐methyl‐imidazolium hexafluorophosphate offered the most interesting features in the separation of cations, such as lower retention time and better resolution. The selected optimal conditions were achieved by adding 0.10 mM 1‐hexyl‐3‐methyl‐imidazolium hexafluorophosphate in 4.0 mM HNO₃ mobile phase for the separation of four cations with the flow rate of 0.9 mL/min at room temperature (25°C). The linear regression equations of Na⁺, K⁺, Mg²⁺, Ca²⁺ were S  = 4.4763c  + 0.0209, S  = 3.8903c  – 0.0087, S  = 6.3974c  – 0.0173, and S  = 7.601c  – 0.0339 and the limits of detection of Na⁺, K⁺, Mg²⁺, Ca²⁺ were 0.296, 4.98, 0.0970, and 1.22 μg/L, respectively. In this work, four cations in samples were successfully detected.     

New organic–inorganic hybrid structure based on paradodecatungstate clusters and imidazolium cations

An organic–inorganic hybrid material based on paradodecatungstate anions and imidazolium cations, Na₂(HIm)₈(H₂W₁₂O₄₂)·10H₂O (HIm: imidazolium), has been synthesized under mildly acidic conditions. This compound was characterized by single-crystal X-ray diffraction, IR and UV–visible spectroscopies, and thermogravimetric and differential thermal analyses. The compound crystallizes in the triclinic P-1 space group with a = 11.6945(8) Å, b = 12.4782(6) Å, c = 14.0952(9) Å, α = 106.041(3)°, β = 109.338(2)°, γ = 100.249(3)°, V = 1781.0(3) Å³, and Z = 2. The crystal structure exhibits an infinite 1D inorganic structure built from [H₂W₁₂O₄₂]^10? clusters and sodium cations; adjacent chains are further joined up by hydrogen-bonding interactions between protonated imidazole cations, water molecules, and polyoxoanions, to form a 3D supramolecular architecture.     

Hydrogen Bonding and Solvent Effects on Complexation of Alkali Metal Cations by Lower Rim Calix[4]arene Tetra(O-[N-acetyl-D-phenylglycine methyl ester]) Derivative

Complexation of alkali metal cations with 5,11,17,23-tetra-tert-butyl-26,28,25,27-tetrakis(O-methyl-D-α-phenylglycylcarbonylmethoxy)calix[4]arene (L) was studied by means of spectrophotometric, conductometric and potentiometric titrations at 25 °C. The solvent effect on the binding ability of L was examined by using two solvents with different affinities for hydrogen bonding, viz. methanol and acetonitrile. Despite the presence of intramolecular NH···O=C hydrogen bonds in L, which need to be disrupted to allow metal ion binding, this calix[4]arene amino acid derivative was shown to be an efficient binder for smaller Li⁺ and Na⁺ cations in acetonitrile (lg K _LiL  > 5, lg K _NaL  = 7.66), moderately efficient for K⁺ (lg K _KL  = 4.62), whereas larger Rb⁺ and Cs⁺ did not fit in its hydrophilic cavity. The complex stabilities in methanol were significantly lower (lg K _NaL  =  4.45, lg K _KL  = 2.48). That could be explained by different solvation of the cations and by competition between the cations and methanol molecules (via hydrogen bonds) for amide carbonyl oxygens. The influence of cation solvation on complex stability was most pronounced in the case of Li⁺ for which, contrary to the quite stable LiL ⁺ complex in acetonitrile, no complexation was observed in methanol under the conditions used.     

Determination of Pyridinium Ionic Liquid Cations by Reversed Phase Ion-Pair Chromatography Using Gradient Elution

Four pyridinium ionic liquid cations (N-ethyl-pyridinium, N-butyl-pyridinium, N-butyl-4-methyl-pyridinium, N-hexyl-pyridinium) were separated and determined by reversed phase ion-pair chromatography with ultraviolet-visible detection. The effects of ion-pair reagent, acetonitrile concentration and column temperature on the retention and separation of the cations were evaluated. Then the four pyridinium cations could be separated at baseline within 13 min. The detection limits (S/N = 3) were 0.30–0.70 mg L^?1, and relative standard deviations (n = 5) for peak areas were 0.18–0.58%. The method was applied to analyze surface water with recoveries of 99.5–104.0%, which is accurate, reliable and practical.     

Analysis of Morpholinium Ionic Liquid Cations by Hydrophilic Interaction Columns Coupled with Indirect UV Detection

A method was developed for the separation and detection of morpholinium ionic liquid cations by hydrophilic interaction column combined with indirect ultraviolet detection using imidazolium ionic liquids as ultraviolet absorbents in high‐performance liquid chromatography. The effects of the ultraviolet absorbents, organic solvents, and the pH value of the aqueous solution in the mobile phase for the determination of morpholinium cations were investigated by using a hydrophilic column with carbamoyl group as the analytical column. The retention and detection behavior of morpholinium cations was discussed. The suitable chromatographic conditions were 0.8 mmol/L 1‐ethyl‐3‐methyl‐imidazolium tetrafluoroborate aqueous solution (pH 3.5 adjusted with acetic acid)/acetonitrile (45/55, v/v) as the mobile phase and a detection wavelength of 210 nm. Under these conditions, the baseline separation of N‐methyl‐N‐ethyl‐morpholinium cation ([MEMo]⁺) and N‐methyl‐N‐propyl‐morpholinium cation ([MPMo]⁺) was successfully achieved in 15 min. The detection limits of [MEMo]⁺ and [MPMo]⁺ were 0.595 and 0.531 mg/L, respectively. Relative standard deviations were less than 0.2%. This method has been successfully applied to the analysis of morpholinium ionic liquid samples synthesized in chemical laboratories, which is simple, reliable, and practical.     

A computational study of the suppression of ammonia volatility in aqueous systems using ionic additives

Controlling vapour pressure is necessary for the viability of aqueous ammonia solutions in commercial applications such as refrigeration. In this study, Gibbs ensemble Monte Carlo (GEMC) simulations were used to calculate the vapour–liquid equilibrium (VLE) of ammonia–water–MCl mixtures, M = Na or Cs, within the isobaric–isothermal- (NpT-) ensemble. The results indicate that in the presence of alkali metal additives, there is a non-negligible ‘salting-in’ effect for ammonia in the liquid phase. Experimental measurements of the liquid phase concentration of ammonia confirm the GEMC results i.e. the vapour loss rates in systems containing ionic additives is slightly lower. Gibbs ensemble Monte Carlo simulations also indicate that ammonia prefers to solvate aqueous cations as a result of electrostatic interactions. Ab-initio calculations show that the M⁺–ammonia complex is energetically more stable than the M⁺–water complex. The difference in the binding free energy Δ(ΔG _bind(M⁺–NH₃)?ΔG _bind(M⁺–H₂O)) depends on the size of the cation and is highest for the smallest tight cations (e.g. Li⁺) and lowest for the most polarisable cations (Cs⁺).     

Synthesis of novel chromogenic azocalix[4]arenemonoquinones and their binding with alkali metal cations

Five new chromogenic azocalix[4]arenemonoquinones have been synthesized, characterized and examined for their interaction with alkali metal cations (Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺) by UV-visible spectroscopic and cyclic voltammetric techniques. It has been determined that 4a selectively exhibits a significant bathochromic shift in its UV-visible spectrum on interaction with potassium ion in comparison to its treatment with other alkali metal cations. The binding stoichiometry of 4a and potassium ion was established to be 1:1 with an association constant of 3.27 × 10⁴ M^?1. Cyclic voltammetric experiments in 4:1 dichloromethane-acetonitrile also revealed a significant anodic shift (ΔE _(1/1′) = 115 mV) of the original redox waves of 4a on interaction with potassium ion.     

Eluent-Induced Separation of Inorganic Cations in Capillary Liquid Chromatography with Contactless Conductivity Detector

A non-suppressed contactless conductivity detector has been used as a capillary detector in a capillary ion chromatograph, combining a reversed-phase C30 column permanently modified with ionic surfactant. The C30 column (100 × 0.32 mm. id) was modified with sodium dodecyl sulfate (SDS) for the separation of inorganic cations. Monovalent cations could be separated by the proposed system, in which methanesulfonic acid (MSA) and SDS were employed as the mobile phase component, but divalent cations could not be eluted under this condition. As for the case of SDS used as the eluent, an H⁺-cation-exchange column was placed before the sample injector to convert the Na⁺ from the eluent into H⁺, and when the mixture of MSA and dodecyl sulfuric acid was used as the eluent, the retention of cations was improved and baseline separation of the cations was achieved within 23 min. The effect of the eluent composition on the retention behavior of inorganic cations was investigated. The repeatability of retention time and peak height varied from 0.39 to 0.58 and 2.21 to 3.25 % as relative standard deviation, respectively.

     

Kinetics and mechanism of the oxidation of tris(2,2′-bipyridine)iron(II) and tris(1,10-phenanthroline)iron(II) complexes by nitropentacyanocobaltate(III) in acidic aqueous medium

The kinetics of the oxidation of tris(2,2′-bipyridyl)iron(II) and tris(1,10-phenanthroline)iron(II) complexes ([Fe(LL)₃]²⁺, LL = bipy, phen) by nitropentacyanocobaltate(III) complex [Co(CN)₅NO₂]^3? was investigated in acidic aqueous solutions at ionic strength of I = 0.1 mol dm^?3 (HCl/NaCl). The reactions were carried out at fixed acid concentration ([H⁺] = 0.01 mol dm^?3) and the temperature maintained at 35.0 ± 0.1 °C. Spectroscopic evidence is presented for the protonated oxidant. Protonation constants of 360.43 and 563.82 dm³ mol^?1 were obtained for the monoprotonated and diprotonated Co(III) complexes respectively. Electron transfer rates were generally faster for [Fe(bipy)₃]²⁺ than [Fe(phen)₃]²⁺. The redox complexes formed ion-pairs with the oxidant with increasing concentration of the oxidant over that of the reductant. Ion-pair constants for these reaction were 160.31 and 131.9 dm³ mol^?1 for [Fe(bipy)₃]²⁺ and [Fe(phen)₃]^2+, respectively. The activation parameters measured for these systems have values as follows: ?H ^≠ (kJ K^?1 mol^?1) = +113.4 ± 0.4 and +119 ± 0.3; ?S ^≠ (J K^?1) = +107.6 ± 1.3 and 125.0 ± 1.6; ?G ^≠ (kJ K^?1) = +81 ± 0.4 and +82.4 ± 0.4; and E _a (kJ mol^?1) = 115.9 ± 0.5 and 122.3 ± 0.6 for LL = bipy and phen, respectively. Effect of added anions (Cl^?, $ {\text{SO}}_{4}^{2 - } $ and $ {\text{ClO}}_{4}^{ - } $ ) on the systems showed decrease in the electron transfer rate constant. An outer-sphere mechanism is proposed for the reaction.     

Some Thermodynamic Properties of Aqueous 2-Mercaptopyridine-N-Oxide (Pyrithione) Solutions

The thermodynamic properties of 2-mercaptopyridine-N-oxide (pyrithione, PT) were studied potentiometrically in NaCl aqueous solutions at different ionic strengths and temperatures. A set of protonation constants is provided, together with distribution (water/2-methyl-1-propanol) and solubility data. The total and the specific solubility (solubility of neutral species) values of pyrithione were determined and, for example, are 0.0561 and 0.0518 mol·dm^?3 at c _NaCl = 0.244 mol·dm^?3 and T = 298.15 K. By fitting the distribution and solubility results against the ionic strength, the Setschenow coefficient and the activity coefficients of the neutral species were determined. In pure water, the specific solubility is log₁₀ \( S_{m 0}^{0} = \, {-} 1. 20 \, \pm \, 0.0 4 \) . To determine the activity coefficient of the charged species and the protonation constant at infinite dilution, the data were analyzed by different models, namely the Debye–Hückel type equation, the SIT (Specific ion Interaction Theory) and the Pitzer approach. The interaction coefficient of the deprotonated pyrithione species was determined [ε(Na⁺, PT^?) = ?0.105 ± 0.002]. The protonation enthalpy was also determined, is slightly positive, and the protonation process is entropic in nature. At infinite dilution and T = 298.15 K, log₁₀ K ^H0 = 4.620 ± 0.002, ΔG ⁰ = –26.4 ± 0.1 kJ·mol^?1, ΔH ⁰ = 2.1 ± 0.5 kJ·mol^?1 and TΔS ⁰ = 28.5 ± 0.5 kJ·mol^?1. The electrochemical behavior of pyrithione was studied in NaCl solutions at T = 298.15 K. It was found that voltammetry can be used to study the binding ability of pyrithione towards metal cations. The results of this work are in agreement with literature findings and improve the knowledge of the chemistry of pyrithione in aqueous solutions.     

Synthesis and characterization of anhydrous conducting polyimide/ionic liquid complex membranes via a new route for high‐temperature fuel cells

The paper deals with the synthesis and characterization of a new series of anhydrous conducting acid‐doped complex membranes based on polyimide (PI) and ionic liquid (IL) for high‐temperature fuel cells via a new route. For this purpose, three imidazolium‐based ILs (RIm⁺BF₄^?) with different alkyl chain lengths (R=methyl, ethyl, and butyl) are added into polyamic acid (PAA) intermediate prepared from the reaction of benzophenonetetracarboxylic dianhydride and diaminodiphenylsulfone in different –COOH/imidazolium molar ratios (n = 0.5, 1, and 2). Then, the thermally imidized complex membrane was doped with H₂SO₄. The conductivities of acid‐doped PI/IL complex membranes prepared by taking n of 1 are found to be in the range of 10^?4?10^?5 S cm^?1 at 180°C, whereas the acid‐free PI/IL complex membranes show the conductivity at around 10^?9?10^?10 S cm^?1. Thermogravimetric analysis results reveal that the acid‐doped PI/IL complex membranes are thermally stable up to 250°C. Dynamic mechanical analysis results of the acid‐doped ionically interacted complex membrane show that the mechanical strengths of the PI/IL complex membranes including 1‐methyl imidazolium tetrafluoroborate (MeIm‐BF₄) and 1‐ethyl 3‐methyl imidazolium tetrafluoroborate (EtIm‐BF₄) are comparable with those of pristine PI until 200°C. Furthermore, it can be clearly emphasized that the ionic interaction between carboxylic acid groups of PAA's and IL's cations offers a positive role in long‐term conductivity stability by preventing the IL migration at high temperatures. On the other hand, preliminary methanol permeability tests of the acid‐doped membranes show that they can also be considered as an alternative for direct methanol fuel cells. Copyright © 2011 John Wiley & Sons, Ltd.     

Acid–Base Properties, Solubility, Activity Coefficients and Na+ Ion Pair Formation of Complexons in NaCl(aq) at Different Ionic Strengths

The protonation constants and solubilities of three complexons [ethylenediamine-N,N′-disuccinic acid (EDDS), ethylene glycol bis(2-aminoethyl ether)-N,N,N′,N′-tetraacetic acid (EGTA) and 1,2-cyclohexanediamine-N,N,N′,N′-tetraacetic acid (CDTA)] are reported in aqueous solutions of NaCl with different ionic strength values (0 ≤ I ≤ 4.8 mol·L^?1) and, in the case of CDTA, in (CH₃)₄NCl (0.1 ≤ I ≤ 2.7 mol·L^?1). The dependence on ionic strength of the protonation constants of these three complexons and four other complexons that were previously reported (NTA, EDTA, DTPA and TTHA), is analyzed in NaCl solution; the ionic strength influences quite strongly the protonation constants (as an example for CDTA, log₁₀ K ₁ = 10.54 and 9.25 at I = 0.1 and 1 mol·L^?1, respectively), while the effect of (CH₃)₄NCl concentration is lower. Based on the total solubility S ^T and the protonation constant data at different salt concentrations, the solubility of the neutral species S ⁰ and the solubility products K _S0 are obtained. The Setschenow coefficients k _m and the solubility values S ₀ ⁰ in pure water are also reported (S ₀ ⁰  = 0.55, 0.21 and 0.75 mmol·kg^?1 for EDDS, EGTA and CDTA, respectively). The dependence of the protonation constants on ionic strength is also interpreted in terms of ion pair formation, and the formation constants of Na⁺ species are reported.     

Eluent-Induced Separation of Inorganic Cations in Capillary Liquid Chromatography with Contactless Conductivity Detector

A non-suppressed contactless conductivity detector has been used as a capillary detector in a capillary ion chromatograph, combining a reversed-phase C30 column permanently modified with ionic surfactant. The C30 column (100 × 0.32 mm. id) was modified with sodium dodecyl sulfate (SDS) for the separation of inorganic cations. Monovalent cations could be separated by the proposed system, in which methanesulfonic acid (MSA) and SDS were employed as the mobile phase component, but divalent cations could not be eluted under this condition. As for the case of SDS used as the eluent, an H⁺-cation-exchange column was placed before the sample injector to convert the Na⁺ from the eluent into H⁺, and when the mixture of MSA and dodecyl sulfuric acid was used as the eluent, the retention of cations was improved and baseline separation of the cations was achieved within 23 min. The effect of the eluent composition on the retention behavior of inorganic cations was investigated. The repeatability of retention time and peak height varied from 0.39 to 0.58 and 2.21 to 3.25 % as relative standard deviation, respectively.     

Ion chromatography with the indirect ultraviolet detection of alkali metal ions and ammonium using imidazolium ionic liquid as ultraviolet absorption reagent and eluent

Indirect ultraviolet detection was conducted in ultraviolet‐absorption‐agent‐added mobile phase to complete the detection of the absence of ultraviolet absorption functional group in analytes. Compared with precolumn derivatization or postcolumn derivatization, this method can be widely used, has the advantages of simple operation and good linear relationship. Chromatographic separation of Li⁺, Na⁺, K⁺, and NH₄⁺ was performed on a carboxylic acid base cation exchange column using imidazolium ionic liquid/acid/organic solvent as the mobile phase, in which imidazolium ionic liquids acted as ultraviolet absorption reagent and eluting agent. The retention behaviors of four kinds of cations are discussed, and the mechanism of separation and detection are described. The main factors influencing the separation and detection were the background ultraviolet absorption reagent and the concentration of hydrogen ion in the ion chromatography‐indirect ultraviolet detection. The successful separation and detection of Li⁺, Na⁺, K⁺, and NH₄⁺ within 13 min was achieved using the selected chromatographic conditions, and the detection limits (S/N = 3) were 0.02, 0.11, 0.30, and 0.06 mg/L, respectively. A new separation and analysis method of alkali metal ions and ammonium by ion chromatography with indirect ultraviolet detection method was developed, and the application range of ionic liquid was expanded.     

Imidazolium‐based polymerized ionic liquid crystals containing fluorinated cholesteryl mesogens

A series of polymerized ionic liquid crystals (PILCs) bearing fluorinated cholesteryl mesogens were synthesized in this work, which include polymerized imidazolium bromides (PIBs) and polymerized imidazolium hexafluorophosphates (PIHs). The PIBs were synthesized using alkyl bromine‐containing polysiloxanes and 1‐butyl‐1H‐imidazole, and the PIHs were synthesized by anion metathesis reaction using the corresponding PIBs and KPF₆. The chemical structures, liquid crystalline (LC) properties, and electrorheological (ER) effect of these PILCs were characterized by use of various experimental techniques. All the PILCs showed smectic A mesophase on heating and cooling cycles. The smectic layer structure of these PILCs are originated from the rigid fluorinated cholesteryl mesogens and the flexible moieties in the LC phase, but the ion pairs (imidazolium cations–PF₆^?, Im⁺–PF₆^?; or imidazolium cations–Br^?, Im⁺–Br^?) can disperse in the polysiloxane matrix and expand the d‐spacing in the smectic layers. The PIHs show lower T_g and T_i than the corresponding precursor PIBs, which is due to the larger ion volume of Im⁺–PF₆^? for PIHs than that of Im⁺–Br^? for PIBs. A series of 40 V% ER fluids were prepared by mixing the PILCs with polydimethylsiloxane (PDMS), and the ER behaviors were studied. All the PILC/PDMS fluids showed ER effect, and the PIH/PDMS fluids show a little greater ER effect than the PIB/PDMS fluids. The PILC droplets in the ER fluids become deformed owing to both the orientation of fluorinated cholesteryl mesogens and the suppression of ionic migration when a DC electric field was applied, resulting in the occurrence of ER effect. Copyright © 2015 John Wiley & Sons, Ltd.     

Hydrogen gas yields in irradiated room-temperature ionic liquids

Yields of H₂ produced by electron beam irradiation were investigated in a series of room-temperature ionic liquids comprising 1-hexyl-3-methylimidazolium, 1-hexyl-4-(dimethylamino)pyridinium, 1-butyl-1-methylpyrrolidinium, triethylammonium or trioctyl(tetradecyl)phosphonium cations associated with bis(trifluoromethylsulfonyl)imide anion. The G(H₂) values ranged from 2.6×10⁻⁸ mol/J for the imidazolium and pyridinium-based ionic liquids to 2.5×10⁻⁷ mol/J for the phosphonium liquid. These results correlate well with yields of gaseous hydrogen in studies of nonionic aliphatic and aromatic organic compounds.     

Vinyl-functionalized imidazolium ionic liquids as new electrolyte additives for high-voltage Li-ion batteries

Four functionalized ionic liquids based on imidazolium cations with vinyl or alllyl group and TFSI^? anion were synthesized as electrolyte additives for high-voltage Li-ion battery to stabilize carbonate-based electrolytes on the surface of 5 V class cathode materials. The electrochemical behaviors and surface morphology of LiNi_0.5Mn_1.5O₄ cathode had been investigated by cyclic voltammetry, charge–discharge test, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM), respectively. Cycle life and rate performance of the Li/LiNi_0.5Mn_1.5O₄ cells containing 1.2 M LiPF₆ in ethylene carbonate/ethyl methyl carbonate can be improved by adding 1-allyl-3-vinyl imidazolium bis(trifluoromethanesulphonyl)imide ([AVIm][TFSI]). The addition of 3 wt.% [AVIm][TFSI] results in high discharge capacity of above 130 mAh g^?1. Surface analysis of the cathode material (XPS and SEM) suggested that a stable and compact polymer film was formed on the LiNi_0.5Mn_1.5O₄ cathode by electroinitiated polymerization of imidazolium cation with vinyl and allyl group.     

Interaction of Molybdenum(VI) Oxyanions with +2 Metal Cations

The association of molybdenum(VI) oxyanions with metal cations was investigated in solutions of low ionic strength, such as those prevailing in most natural waters. Potentiometric titrations were carried out for the systems containing molybdenum(VI) anions and divalent metal cations (M = Mg, Ca, Sr, Ba, Mn, Fe, Co, Ni, Cu, Zn, Cd, Hg and Pb). This selection includes the major cations and some other cations of high environmental relevance. The interaction of iron(III) with Mo(VI) anions was also studied. At neutral and basic pH values and for those systems where the solubility of the molybdate salt is high enough, ionic species pairs such as [M(MoO₄)] predominate. At acidic pH values, [M(HMoO₄)]⁺ and [M(Mo₇O₂₄)]^4– are formed, the latter species are only relevant for total molybdenum concentrations higher than 1 mmol·L^?1. These results provide the basis for molybdenum speciation in natural aquatic systems, on which the environmental fate, bioavailability and toxicity of the element depend.