Ion-exchange high-performance liquid chromatography in the brewing industry

Isocratic HPLC methods using an ion-exchange column (Aminex HPX) for the determination of carbohydrates, organic acids, alcohols (methanol, ethanol, glycerol), 5-hydroxymethylfurfural and purines in wort, beer, wine and soft drinks are presented. The strategy for selecting the best column geometry, the appropriate counter ion and specific detection systems is discussed.     

The Effect of Sound Frequency and Intensity on Yeast Growth,Fermentation Performance and Volatile Composition of Beer

This study investigated the impact of varying sound conditions (frequency and intensity) on yeast growth, fermentation performance and production of volatile organic compounds (VOCs) in beer. Fermentations were carried out in plastic bags suspended in large water-filled containers fitted with underwater speakers. Ferments were subjected to either 200–800 or 800–2000 Hz at 124 and 140 dB @ 20 µPa. Headspace solid-phase microextraction (HS-SPME) coupled with gas chromatography-mass spectrometry (GC-MS) was used to identify and measure the relative abundance of the VOCs produced. Sound treatment had significant effects on the number of viable yeast cells in suspension at 10 and 24 h (p < 0.05), with control (silence) samples having the highest cell numbers. For wort gravity, there were significant differences between treatments at 24 and 48 h, with the silence control showing the lowest density before all ferments converged to the same final gravity at 140 h. A total of 33 VOCs were identified in the beer samples, including twelve esters, nine alcohols, three acids, three aldehydes, and six hop-derived compounds. Only the abundance of some alcohols showed any consistent response to the sound treatments. These results show that the application of audible sound via underwater transmission to a beer fermentation elicited limited changes to wort gravity and VOCs during fermentation.     

Optimisation of wort volatile analysis by headspace solid-phase microextraction in combination with gas chromatography and mass spectrometry

The aim of this study was to create a simple, solventless technique without derivatisation in order to analyze a broad range of volatiles in beer wort. A method was developed using headspace solid-phase microextraction coupled with gas chromatography and mass spectrometry. The procedure was optimised by selection of the appropriate fibre and optimisation of extraction temperature, extraction time, and salting-out. The detection limits were well below the actual wort concentrations of the selected volatiles, ranging from 12 ng/l for linalool to 0.53 microg/l for furfural. Moreover, the procedure showed a good linearity and was applied to the analysis of wort samples taken from a wort boiling process in an industrial brewery.     

Method optimization by solid-phase microextraction in combination with gas chromatography with mass spectrometry for analysis of beer volatile fraction

A simple and sensitive method for the analysis of beer volatile compounds was optimised using headspace solid-phase microextraction (SPME) and gas chromatography with mass detection. Headspace SPME using a 75 microm Carboxen-polydimethylsiloxane (CAR-PDMS) fiber provided effective sample enrichment and enabled extraction of a wide variety of compounds. The reproducibility depended on the compounds, with a mean value of 1.4% for alcohols, 3.3% for ethers, 6.7% for aldehydes, 3.4% for acids, 1.7% for aromatic compounds, 2.4% for esters, 7.4% for hydrocarbons, 1.8% for alicyclic compounds, and 3.4% for heterocyclic compounds. The optimised methodology can be used to compare volatile profile from different types of beers and eventually to study the evolution of a particular beer during aging.     

Simultaneous sampling of volatile and non-volatile analytes in beer for fast fingerprinting by extractive electrospray ionization mass spectrometry

By gently bubbling nitrogen gas through beer, an effervescent beverage, both volatile and non-volatile compounds can be simultaneously sampled in the form of aerosol. This allows for fast (within seconds) fingerprinting by extractive electrospray ionization mass spectrometry (EESI-MS) in both negative and positive ion mode, without the need for any sample pre-treatment such as degassing and dilution. Trace analytes such as volatile esters (e.g., ethyl acetate and isoamyl acetate), free fatty acids (e.g., caproic acid, caprylic acid, and capric acid), semi/non-volatile organic/inorganic acids (e.g., lactic acid), and various amino acids, commonly present in beer at the low parts per million or at sub-ppm levels, were detected and identified based on tandem MS data. Furthermore, the appearance of solvent cluster ions in the mass spectra gives insight into the sampling and ionization mechanisms: aerosol droplets containing semi/non-volatile substances are thought to be generated via bubble bursting at the surface of the liquid; these neutral aerosol droplets then collide with the charged primary electrospray ionization droplets, followed by analyte extraction, desolvation, ionization, and MS detection. With principal component analysis, several beer samples were successfully differentiated. Therefore, the present study successfully extends the applicability of EESI-MS to the direct analysis of complex liquid samples with high gas content.

Comparison of four extraction methods for analysis of volatile hop‐derived aroma compounds in beer

The volatile organic compound profile in beer is derived from hops, malt, yeast, and interactions between the ingredients, making it very diverse and complex. Due to the range and diversity of the volatile organic compounds present, the choice of the extraction method is extremely important for optimal sensitivity and selectivity. This study compared four extraction methods for hop‐derived compounds in beer late hopped with Nelson Sauvin. Extraction capacity and variation were compared for headspace solid‐phase micro extraction, stir bar sorptive extraction, headspace sorptive extraction, and solvent‐assisted flavor evaporation. Generally, stir bar sorptive extraction was better suited for acids, headspace sorptive extraction for esters and aldehydes, while headspace solid‐phase microextraction was less sensitive overall, extracting 40% fewer compounds. Solvent‐assisted flavor evaporation with dichloromethane was not suitable for the extraction of hop‐derived volatile organic compounds in beer, as the profile was strongly skewed towards alcohols and acids. Overall, headspace sorptive extraction is found to be best suited, closely followed by stir bar sorptive extraction.     

高效阴离子交换色谱-脉冲安培检测法分析啤酒和麦汁中的糖

建立了高效阴离子交换色谱-脉冲安培检测(HPAEC-PAD)同时测定单糖、二糖和多种低聚糖的方法。采用水、0.25 mmol/L NaOH溶液和1 mol/L NaAc溶液三元梯度淋洗,在CarboPac PA-100色谱柱上,11种糖在40 min内达到良好分离;采用积分脉冲安培检测方法,无需对样品进行复杂的前处理或衍生反应便可直接检测。11种糖的检出限(S/N=3)在13～88 pg范围内。将该方法用于啤酒和麦汁样品中单糖、二糖及低聚糖的分析取得了很好的结果,样品中的加标回收率为81%～107%。     

Preparation of novel solid-phase microextraction fibers by sol-gel technology for headspace solid-phase microextraction-gas chromatographic analysis of aroma compounds in beer

3-(Trimethoxysilyl)propyl methacrylate (TMSPMA) was first used as precursor as well as selective stationary phase to prepare the sol-gel-derived TMSPMA-hydroxyl-terminated silicone oil (TMSPMA-OH-TSO) solid-phase mircroextraction (SPME) fibers for the analysis of aroma compounds in beer. TMSPMA-OH-TSO was a medium polarity coating, and was found to be very effective in carrying out simultaneous extraction of both polar alcohols and fatty acids and nonpolar esters in beer. The extraction temperature, extraction time, and ionic strength of the sample matrix were modified to allow for maximium sorption of the analytes onto the fiber. Desorption temperature and time were optimized to avoid the carryover effects. To check the matrix effects, several different matrices, including distilled water, 4% ethanol/water (v/v) solution, a concentrated synthetic beer, a "volatile-free" beer and a real beer were investigated. Matrix effects were compensated for by using 4-methyl-2-pentanol as internal standard and selecting the "volatile-free" beer as working standard. The method proposed in this study showed satisfactory linearity, precision and detection limits and accuracy. The established headspace SPME-gas chromatography (GC) method was then used for determination of volatile compounds in four beer varieties. The recoveries obtained ranged from 92.8 to 105.8%. The relative standard deviations (RSD, n = 5) for all analytes were below 10%. The major aroma contributing substances of each variety were identified via aroma indexes.     

Analysis of Non-Aromatic Organic Acids in Beer by CE and Direct Detection Mode with Diode Array Detection

A method for the analysis of the main non-aromatic organic acids in beer using capillary electrophoresis is presented. In this work, malic, citric, succinic, pyruvic, acetic and lactic acids are separated using a sodium hydrogen phosphate background electrolyte with direct detection mode with a diode array detector. The separation exhibits lower sensitivity than equivalent methods with indirect detection mode, however, the risk of co-migration with unknown compounds in beer matrixes is significantly reduced. This is due to (i) a higher efficiency (250,000–400,000 theoretical plates), (ii) a higher selectivity than any equivalent method using an indirect detection mode, and (iii) the possibility to monitor other wavelengths in parallel (260 nm for example) to check for possible co-migration with phenolic or benzoic acids. This was critical when working with beer samples as an unknown compound absorbing at 200 and 260 nm was detected in the neighbourhood of malic, citric and succinic acids. Such co-migration will not have been detected using single wavelength detection below 200 nm or indirect detection mode.     

Comparison of headspace and direct single-drop microextraction and headspace solid-phase microextraction for the measurement of volatile sulfur compounds in beer and beverage by gas chromatography with flame photometric detection

Three approaches based on headspace single-drop microextraction (HS-SDME), direct single-drop microextraction (Direct-SDME), and headspace solid-phase microextraction (HS-SPME), have been compared for analyzing volatile sulphur compounds (VSCs) in beer and beverage. Procedures and performance of the three methods have been contrasted through the determination of extraction efficiencies, precision, linearity and limits of detection. The overall process of HS-SDME and HS-SPME was applied to GC-FPD determination of five VSCs in beer and beverage.     

Gas chromatographic determination of pesticide residues in malt, spent grains, wort, and beer with electron capture detection and mass spectrometry

A method for the simultaneous determination of 9 pesticides (dinitroanilines, organophosphorus, triazoles, and pyrimidines) in several products (malt, spent grains, wort, and beer) of the beer industry is reported. Solid samples (malt and spent grains) are extracted by homogenization with a water-hexane mixture, and the pesticides are partitioned with dichloromethane. Liquid samples (wort and beer) are extracted by sonication with a hexane-dichloromethane mixture. Determination of pesticide residues was made by capillary gas chromatography with an electron capture detector (ECD). Confirmation of the compounds was performed by gas chromatography/ion trap mass spectrometry in the selected ion monitoring mode. Detection limits for GC-ECD varied from 0.2 to 5.5 pg for trifluralin and malathion, respectively. Recoveries of the pesticides from spiked samples ranged from 81.2 to 113.7% with a relative standard deviation between 3.4-7.5%. The method presents good linearity over the studied range (0.005-2 microg/mL). The proposed method is rapid and reliable and can be useful for routine monitoring during brewing.     

Quantitative Determination of Hydroxycoric Acids and the Analysis of the Dynamics of Their Accumulation in Malus sylvestris Leaves

Abstract—The presence of hydroxycinnamic acids in the leaves of Malus sylvestris Mill. and Malus domestica Borkh. is established by using HPLC analysis. The quantitative determination of hydroxycinnamic acids is carried out by spectrophotometric analysis. It is found that the maximum amount of hydroxycinnamic acids accumulates in the plant during the fruiting phase.     

Purification and Characterization of a New Metallo-Neutral Protease for Beer Brewing from Bacillus amyloliquefaciens SYB-001

The increased additive amount of adjuncts in the raw materials of Chinese beer requires the usage of protease to release more water-soluble proteins. Here, a metallo-neutral protease suited for brewing industry was purified from Bacillus amyloliquefaciens SYB-001. A 5.6-fold purification of the neutral protease was achieved with a 4-step procedure including ammonium sulfate precipitation, ion-exchange, hydrophobic interaction, and gel-filtration chromatography. The molecular mass of the enzyme was estimated to be 36.8 kDa. The protease was active and stable at a wide range of pH from 6.0–10.0 with an optimum at pH 7.0. The highest activity of the purified enzyme was found at 50 °C. The existence of manganese ion would specifically enhance the protease activity. Comparing with other commercial neutral proteases in China, adding the new neutral protease during mashing process would release more amino acids from wort such as aspartic acid, arginine, methione, and histidine, resulting in a better amino acid profile in wort. Moreover, the wort processed with the new neutral protease had a higher α-amino nitrogen concentration, which would ensure a vigorous yeast growth and better flavor. The study of the enzyme could lay a foundation for its industrial application and further research.     

Beer: An Ancient Yet Modern Biotechnology

The brewing of beer is a complex process that draws on a diversity of sciences and technology, of which chemistry is but one. This paper focuses on the chemistry of the brewing process and of the finished product. It examines each of the main classes of molecule found in beer, considers their contribution to quality and their origins in the brewing process. The study of beer and its production provides an excellent illustrative example for teaching how raw materials and the manner by which they are processed determine the acceptability of a product. Beer, whilst 90%+ water, contains a wide range of chemical species which establish its properties. Apart from ethanol (the common denominator amongst all alcoholic beverages), beer contains substances that determine its flavor, foam, and color. The flavorsome components of beer include the bitter iso-a-acids and aromatic essential oils from hops, along with esters, acids, sulfur-containing compounds and vicinal diketones from yeast. The foaminess of beer depends on the presence of carbon dioxide but also of surface-active materials like amphipathic polypeptides from malt and the bitter substances from hops. The color is due to Maillard reaction products generated largely during the kilning of malt. The malting and brewing processes (which are briefly described) are designed to maximize the extraction and digestion of barley starch and protein, yielding highly fermentable wort. The processes are also designed to eliminate materials that can have an adverse effect on beer quality, such as the haze-forming polyphenol from barley and hops and the lipids and oxygen that, together, can cause beer to stale.     

Quantification of organic acids in beer by nuclear magnetic resonance (NMR)-based methods

The organic acids present in beer provide important information on the product's quality and history, determining organoleptic properties and being useful indicators of fermentation performance. NMR spectroscopy may be used for rapid quantification of organic acids in beer and different NMR-based methodologies are hereby compared for the six main acids found in beer (acetic, citric, lactic, malic, pyruvic and succinic). The use of partial least squares (PLS) regression enables faster quantification, compared to traditional integration methods, and the performance of PLS models built using different reference methods (capillary electrophoresis (CE), both with direct and indirect UV detection, and enzymatic essays) was investigated. The best multivariate models were obtained using CE/indirect detection and enzymatic essays as reference and their response was compared with NMR integration, either using an internal reference or an electrical reference signal (Electronic REference To access In vivo Concentrations, ERETIC). NMR integration results generally agree with those obtained by PLS, with some overestimation for malic and pyruvic acids, probably due to peak overlap and subsequent integral errors, and an apparent relative underestimation for citric acid. Overall, these results make the PLS-NMR method an interesting choice for organic acid quantification in beer.     

Optimisation of gradient HPLC analysis of phenolic compounds and flavonoids in beer using a coularray detector

A method was developed for simultaneous analysis of natural antioxidants in beer using multichannel electrochemical detection with a CoulArray detector, which enables selective and sensitive antioxidant detection in gradient HPLC and facilitates the identification of analytes based on the ratios of signals recorded at different potentials applied to the detection cells arranged in series. The separation conditions were optimised for 27 phenolic compounds including derivatives of benzoic and cinnamic acids, flavones, and a few related glycosides identified in beer samples. Separation selectivities of 11 columns with different stationary phase chemistries were compared, and the pH and gradient programs were optimised for the individual columns to provide best resolution and high number of resolved peaks, using the window-diagram approach. The effects of pH on the sensitivity of electrochemical coulometric detection were considered in the optimisation approach. The optimised conditions were applied to the analysis of real beer samples.     

Towards the Use of Adsorption Methods for the Removal of Purines from Beer

Beer corresponds to a fermented alcoholic beverage composed of several components, including purine compounds. These molecules, when ingested by humans, can be catabolized into uric acid, contributing to uric acid’s level increase in serum, which may lead to hyperuricemia and gout. To assure a proper management of this disease, physicians recommend restrictive dietary measures, particularly by avoiding the consumption of beer. Therefore, it is of relevance to develop efficient methods to remove purine compounds from alcoholic beverages such as beer. In this review, we provide an introduction on fermented alcoholic beverages, with emphasis on beer, as well as its purine compounds and their role in uric acid metabolism in the human body in relation to hyperuricemia and gout development. The several reported enzymatic, biological and adsorption methods envisaging purine compounds’ removal are then reviewed. Some enzymatic and biological methods present drawbacks, which can be overcome by adsorption methods. Within adsorption methods, adsorbent materials, such as activated carbon or charcoal, have been reported and applied to beer or wort samples, showing an excellent capacity for adsorbing and removing purine compounds. Although the main topic of this review is on the removal of purine compounds from beer, other studies involving other matrices rather than beer or wort that are rich in purines are included, since they provide relevant clues on designing efficient removal processes. By ensuring the selective removal of purine compounds from this beverage, beer can be taken by hyperuricemic and gouty patients, avoiding restrictive dietary measures, while decreasing the related healthcare economic burden.     

Analysis of methyl and ethyl esters of hydroxybenzoic and hydroxycinnamic acids in plant material

A method is described for the extraction and purification of methyl and ethyl esters of hydroxybenzoic and hydroxycinnamic acids from plant material. The esters were analyzed as trimethylsilyl derivatives by glass capillary gas chromatography (OV-1, OV-73, Dexsil 300) and gas chromatography-mass spectrometry. The method has been applied to analysis of methyl and ethyl esters of hydroxybenzoic and hydroxycinnamic acids in vegetables and potato peels.     

Banana as Adjunct in Beer Production: Applicability and Performance of Fermentative Parameters

Traditionally, the raw materials for beer production are barley, hops, water, and yeast, but most brewers use also different adjuncts. During the alcoholic fermentation, the contribution of aroma compounds from other ingredients to the final beer flavor depends on the wort composition, on the yeast strain, and mainly on the process conditions. In this context, banana can also be a raw material favorable to alcoholic fermentation being rich in carbohydrates and minerals and providing low acidity. In this work, the objective was to evaluate the performance of wort adjusted with banana juice in different concentrations. For this, static fermentations were conducted at 15 °C at pilot scale (140 L of medium). The addition of banana that changed the concentration of all-malt wort from 10 °P to 12 and 15 °P were evaluated (°P is the weight of the extract or the sugar equivalent in 100 g solution, at 20 °C). The results showed an increase in ethanol production, with approximately 0.4 g/g ethanol yield and 0.6 g/L h volumetric productivity after 84 h of processing when concentrated wort was used. Thus, it was concluded that banana can be used as an adjunct in brewing methods, helping in the development of new products as well as in obtaining concentrated worts.     

Determination of cadmium,aluminium, and copper in beer and products used in its manufacture by electrothermal atomic absorption spectrometry

Procedures were developed for determining cadmium, aluminium, and copper in beer and the products used in its manufacture by electrothermal atomic absorption spectrometry. Beer samples were injected into the furnace and solid samples were introduced as suspensions after preparation in a medium containing hydrogen peroxide, nitric acid, and ammonium dihydrogen phosphate for cadmium atomization. Calibration was performed with aqueous standards, and characteristic masses and detection limits were, respectively, 1 and 0.3 pg for cadmium, 18 and 5.4 pg for aluminium, and 5.6 and 6.8 pg for copper. Different samples of beer, wort, brewer's yeast, malt, raw grain, and hops were analyzed by the proposed procedures. Cadmium was found in low concentrations (0.001-0.08 microg/g and 0-1.3 ng/mL); copper (3-13 microg/g and 25-137 ng/mL) and aluminium (0.6-9 microg/g and 0.1-2 microg/mL) were found at higher levels. The reliability of the procedure was confirmed by comparing the results obtained with others based on microwave oven sample digestion, and by analyzing several certified reference materials.