反相气相色谱法表征聚丁二烯橡胶的表面性质

采用反相气相色谱技术测定了聚丁二烯橡胶的表面性质。以正己烷、正庚烷、正辛烷、正壬烷作为非极性探针测定其表面色散自由能,以二氯甲烷、三氯甲烷、丙酮、乙酸乙酯、乙醚和四氢呋喃作为极性探针测定其路易斯酸碱常数。经计算得出聚丁二烯橡胶在303、313、323、333和343 K的表面色散自由能分别为47.07、46.46、45.85、45.60和45.09 mJ/m2。结果表明,聚丁二烯橡胶表面色散自由能随着温度的升高呈线性降低,路易斯酸常数Ka为0.34,碱常数Kb为1.77,总酸碱作用能力2.11,该聚合物为弱碱性Lewis两性聚合物材料。此外还计算出聚丁二烯橡胶的酸碱作用吸附自由能（~ΔGsa）和吸附焓（~ΔHsa）。     

Solid surface mapping by inverse gas chromatography

Inverse gas chromatography (IGC) at infinite dilution, is a technique for characterising solid surfaces. Current practice is the injection of n-alkane homologous series to obtain the free energy of adsorption of the CH2 group, from which the London component of the solid surface free energy, gamma(d)s, is calculated. A value around 40 mJ/m2 is obtained for poly(ethylene), and 30 mJ/m2 for a clean glass fibre, while the potential surface interactivity of a glass fibre is far greater than that of poly(ethylene). A specific component of the surface, in mJ/m2, should be calculated in order to obtain significant parameters. As applied up to date, when calculating the specific component of the surface energy, the fact that W(sp)a energy values are in a totally different scale than AN or DN values is a major drawback. Consequently, Ka and Kb values obtained are in arbitrary energy units, different from those of the London component measured by injecting the n-alkane series. This paper proposes a method to obtain Ka and Kb values of the surface in the same energetic scale than the London component. The method enables us to correct the traditional London component of a solid, obtaining a new value, where the amount of WaCH2 accounting for Debye interactions with polar sites, is excluded. As a result, an approach to surface mapping is performed in several different substrate materials. We show results obtained on different solid surfaces: poly(ethylene), clean glass fibre, glass beads, chemically modified glass beads and carbon fibre.     

Characterization of surface thermodynamic properties of p-toluene sulfonate-doped polypyrrole by inverse gas chromatography

Summary p-Toluene sulfonate-doped polypyrrole (PPyTos) powder has been characterized by inverse gas chromatography at various temperatures. We have used apolar n-alkanes and polar probes of differing acidity and basicity to interrogate the London dispersive and Lewis acid-base properties of PPyTos, respectively. We have found that the London component of the surface energy (γs^d) is about 90 mJ · m⁻² at 25°C and the acid-base contribution to the free energy of adsorption (ΔG_a ^AB) for Lewis bases is higher than 8 kJ · mol⁻¹. These results show that PPyTos is a high energy material and is capable of very strong specific acid-base interactions. Lewis acidity is, however, dominant and is shown to increase with temperature. The determination of the heats of adsorption for tetrahydrofuran and ethyl acetate enabled us to determine Drago’s E_A, C_A, E_B and C_B parameters. Whilst E_A and C_A are similar to those published for chloride-doped polypyrrole and rank PPyTos as a hard acidic species, the E_B and C_B values suggest that PPyTos is a very soft Lewis base.     

A study of the surface properties of cotton fibers by inverse gas chromatography

In the present study, the potential relationships between the microstructure and the surface properties of different cotton fibers are analyzed by inverse gas chromatography (IGC) at infinite dilution. By measuring the retention time of polar and nonpolar gaseous probes into a column containing the fibers, surface characteristics of these fibers, in particular the dispersive component of their surface energy and their surface morphological index, were determined. It is clearly shown that the presence of natural waxes on cotton fibers plays a major role on their thermodynamic surface properties, affecting the surface energy and the acid-base character as well as the morphological aspects of such fibers. Finally, it appeared that IGC is a well appropriate method for the evaluation of the surface characteristics of cotton fibers.     

Aspects of polymer surface characterization by inverse gas chromatography

The inverse gas chromatographic method has been used to evaluate dispersive surface energies and acid/base interaction values for a styrene/maleic anhydride copolymer over a substantial temperature range. Surface energy calculations require knowledge of the dimensions of adsorbed molecules; conventional values of these for linear alkanes result in reliable surface energy data at near-ambient temperatures. Above about 60°C, however, more reliable surface energy data are obtained when the dimensions of the adsorbed species are corrected by density/temperature variations of the vapors. The copolymer studied was shown to be amphoteric, but with an appreciable prevalence of basic surface sites. © 1994 John Wiley & Sons, Inc.     

Characterization of the surface properties of heavy residues of oil distillation by inverse gas chromatography

Summary Heavy residues from the distillation of oils (SAFANYA) have been analyzed by inverse gas chromatography (IGC). The dispersive components of the surface energies of the residues could readily be determined. Acid/base characteristics could be appreciated using an original method developed in this Laboratory.     

Determination of the surface properties of untreated and chemically treated kaolinites by inverse gas chromatography

Inverse gas chromatography is used to study the surface properties of the untreated and chemically treated kaolinite samples. Changes in the enthalpy of adsorption for a variety of probes and in the surface energy of clays are measured and the effect of modification of the natural clay after chemical treatment with Na₂CO₃ is determined. The surface energy of the natural clay increased by the modification due to an increase in the surface area. It can be concluded that the dispersive component of surface free energy, γ _s ^d , decreases with temperature in the 200–275°C temperature range for both samples. Temperature coefficients of γ _s ^d for untreated and modified kaolinites are −0.1185 and −0.3966 mJ/(m² °C) with the correlation coefficients (R ²) of 0.8479 and 0.965, respectively. From the retention data for polar probes at infinite dilution, information on the accessibility of surface sites to the probes and on the acid-base character of the surface is obtained. The specific free energy of adsorption, the specific enthalpy of adsorption (ΔH ^sp), and the specific entropy of adsorption of polar probes on initial and modified kaolinites are determined. The ΔH ^sp values correlated with the donor numbers and modified acceptor numbers of the probes to quantify the acidity (K _A) and basicity (K _D) parameters of clay surfaces. The values of K _A and K _D for initial and modified kaolinites are determined to be 0.1202 and 0.2803; 0.0130 and 0.0408 with the correlation coefficients of −0.9805 and −0.9782, respectively. The unmodified clay sample indicated a more acidic character, while the modified clay sample conferred a largely basic character. Consequently, the predominant surface basicity of the modified kaolinite agrees with expectation, bearing in mind the treatment with Na₂CO₃, taking into consideration that such a modification contributes to a decrease in the hydrophilicity of the surface and also results in the surface showing only weak Lewis acidity. The text was submitted by the authors in English.     

Effect of acid treatment on surface properties evolution of attapulgite clay: An application of inverse gas chromatography

In this paper, the evolution of structural, textural and surface properties of attapulgite after treatment with increasing concentrations of hydrochloric acid (0.5, 1, 3 and 5 M) is reported. The solids obtained were characterized by SEM, XRD, FTIR and BET analysis. The surface properties were also evaluated using inverse gas chromatography at infinite dilution (IGC-ID) and finite concentration (IGC-FC). The IGC analysis permitted us to reach several parameters such as: specific surface area, BET constant with organic probes and the distribution functions of the adsorption energy sites on the solid surface. At dilute concentrations of acid, carbonates are eliminated and the specific surface area increases. However, the morphology and crystal structure of attapulgite are preserved. At higher concentrations of acid, dissolution of octahedral sheets and at the same time formation of an amorphous silica from the tetrahedral sheets occur. However, the fibrous morphology is still preserved. The calculation of distribution functions reveals a clear evolution in the heterogeneity of the surface during the acid treatment, the appearance of shoulders is attributed to the development of strong specific interactions between the injected polar probe and silanol groups on the surface of amorphous silica formed during the acid treatment.     

反气相色谱法测定锌镁铝类水滑石的表面性能

采用水热合成法制备了锌镁铝类水滑石(ZnMgAl-HTLC),利用X射线衍射仪(XRD)对ZnMgAl-HTLC的晶体结构进行了表征,并以一系列非极性和极性分子为探针分子,采用反气相色谱法(IGC)研究了ZnMgAl-HTLC的表面性能.结果表明:XRD特征衍射峰窄、尖、高,水热合成法能够制得纯度较高的ZnMgAl-HTLC; ZnMgAl-HTLC表面吸附自由能小于零,表面色散自由能最大为6.02 mJ/m²,酸碱作用自由能最大为5.33 kJ/mol,吸附焓为43.6 kJ/mol,吸附熵为0.15 kJ/mol.本文的反气相色谱方法对研究锌镁铝类水滑石的表面性能具有重要的指导意义.     

反相气相色谱法表征1-烯丙基-3-甲基氯代咪唑离子液体的表面性质

采用反相气相色谱(IGC)技术研究了不同温度下1-烯丙基-3-甲基氯代咪唑(［AMIM］Cl)的表面性质。以正己烷、正庚烷、正辛烷和正壬烷作为非极性探针分子测定［AMIM］Cl在343.15、353.15、363.15和373.15 K温度下的表面色散自由能;以二氯甲烷、三氯甲烷、丙酮、乙酸乙酯、四氢呋喃作为极性探针分子测定离子液体Lewis酸碱性质,并测定了吸附自由能和吸附自由焓变等热动力学参数。实验结果表明,［AMIM］Cl的酸解离平衡常数Ka为0.34,碱解离平衡常数Kb为1.68,其表面呈Lewis两性偏碱性特点。在343.15、353.15、363.15和373.15 K温度下,［AMIM］Cl的表面色散自由能分别为52.26、50.82、46.08和42.05 mJ/m2。这一结果对研究离子液体的表面性质及应用有指导作用。     

The surface properties of cellulose and lignocellulosic materials assessed by inverse gas chromatography: a review

The physicochemical surface properties of cellulose and lignocellulosic materials are of major importance in the context of the production of composites, in papermaking, and textile area. These properties can be evaluated by using inverse gas chromatography (IGC), a particularly suitable technique for the characterization of the surface properties of fibrous materials and powders. At infinite dilution conditions of appropriate gas probes, IGC may provide important parameters including the dispersive component of the surface energy of the material under analysis, thermodynamic data on the adsorption of specific probes, and Lewis acid–base interaction parameters between the matrix and the filler of composite materials. This paper critically reviews the most relevant results available in the literature concerning the characterization of cellulose and lignocellulosic materials using IGC. Emphasis will be put into the cellulose and nanocellulose surface properties, changes in the surface properties of cellulose and lignocellulosic materials after chemical and physical modifications, and in the compatibility of cellulose-based materials with polymeric matrices. The surface properties of non-woody fibers will also be considered. Before discussing the results available in the literature, the theoretical background and the main approaches used for the calculation of parameters accessed by IGC will be given. It is expected that this review can contribute to a better knowledge of the physicochemical surface properties of cellulosics.     

Determination of surface heterogeneity profiles on graphite by finite concentration inverse gas chromatography

Inverse gas chromatography (IGC) is an established tool in the determination of the adsorption potential distribution function. This function reflects the energetic heterogeneity profile of a surface and therefore provides interesting information on the nature and population of different surface sites. IGC is shown to be a fast and accurate technique for the determination of the adsorption potential distribution function of two different graphite samples. In this paper the adsorption of acidic and basic organic vapours is studied. Unlike heterogeneity profiles determined by nitrogen measurements, experiments with polar vapours can provide additional information on the adsorption mechanism and polar sorption sites. The heterogeneity profiles of all probes used are significantly different from one another and allow discreet energy levels to be distinguished. Chemically different probes reveal different adsorption mechanisms for the graphite surface.     

Surface Lewis acid-base properties of polymers measured by inverse gas chromatography

Surface Lewis acid-base properties are significant for polymers materials. The acid constant, K(a) and base constant, K(b) of many polymers were characterized by some researchers with inverse gas chromatography (IGC) in recent years. In this paper, the surface acid-base constants, K(a) and K(b) of 20 kinds of polymers measured by IGC in recent years are summarized and discussed, including seven polymers characterized in this work. After plotting K(b) versus K(a), it is found that the polymers can be encircled by a triangle. They scatter in two regions of the triangle. Four polymers exist in region I. K(b)/K(a) of the polymers in region I are 1.4-2.1. The other polymers exist in region II. Most of the polymers are relative basic materials.     

Estimation of the surface energetic heterogeneity of fillers by inverse gas chromatography

The surface properties of the fillers are determining for obtaining high performance filled polymers. Yet, their determination is most difficult. This paper proposes to use inverse gas chromatography, either at infinite dilution or finite concentration conditions, to estimate surface energy and nanomorphological characteristics, but also surface heterogeneity of different clays, talcs of various origins and ground muscovites.     

Characterisation of the surface Lewis acid-base properties of poly(butylene terephthalate) by inverse gas chromatography

Two modes of high-speed counter-current chromatography (HSCCC) were applied to separate 3- and 4-sulfophthalic acid from a mixture. Conventional HSCCC was useful for the separation of up to several hundred milligram quantities of these positional isomers, while pH-zone-refining CCC was implemented successfully to separations at the multigram level. The conventional HSCCC separations were performed with a standard J-type HSCCC system that has a superior resolution but a lower level of retention of the stationary phase of the biphasic solvent system used (acidified n-butanol-water). The pH-zone-refining CCC separations were performed with an X-type HSCCC system (a cross-axis system) that has a higher capability for retention of the stationary phase. The purified positional isomers (over 99% pure as determined by HPLC) were characterized by 1H NMR and negative ion electrospray ionization mass spectrometry.     

Effect of column material on sorption isotherms obtained by inverse gas chromatography

The dependence of sucrose sorption isotherm data obtained by inverse gas chromatography on column material was studied. Columns made of polyamide glass, copper and stainless steel were used. The results obtained indicate that the interaction between water vapour and the column wall cannot be ignored when products with very low equilibrium moisture content are considered.