High-efficiency guided-mode resonance filter

A high-efficiency guided-mode resonance reflection filter is reported. The device consists of a surface-relief photoresist grating and an underlying HfO (2) waveguide layer deposited on a fused-silica substrate. The spectral response measured with a dye-laser beam at normal incidence exhibited a peak reflectance of 98% at a wavelength of 860 nm with sideband reflectance below ~5% extending over the wavelength range provided by the dye (800-900 nm). At normal incidence the filter linewidth was 2.2 nm. High-efficiency double-peak resonances occurred at nonnormal incidence, with the spectral locations of the maxima vayring with the incidence angle. The filter response at various angles of incidence agreed well with the theoretically calculated reflectance curves.     

基于导模共振的窄带可调谐滤波器

提出了一种分离的导模共振滤波器.该结构由光栅层和两个被空气薄层隔开的平板介质波导组成.使用时域有限差分法分析了该光栅结构在不同的结构参数下的光谱特性.研究表明,当TM偏振入射时改变空气薄层的厚度可以实现共振波长的可调谐,并且共振波长几乎随着空气薄层厚度线性变化.浅调制光栅被用于实现窄线宽特性.波长可调谐范围为1 515~1 558nm,半高全宽小于0.6nm.     

Ultranarrow band and high-quantum-efficiency photodetector with waveguide-grating structure and inclined top mirror

A new type of one-mirror inclined waveguide-grating photodetector, which combines a waveguide-grating filter and an inclined top mirror is proposed. Greatly improved spectral response is achieved by the integration of waveguide-grating into classical thin-film homogeneous layers. Comparison between the grating filter and Fabry-Perot filter demonstrates that this structure has two advantages over other photodetector devices. First, the inclined mirror can decouple the quantum efficiency from response speed and spectral response linewidth. Second, comparing the traditional photodetector with Fabry-Perot filter, this type of photodetector with the same materials requires significantly fewer layers while maintaining the same linewidth response, high peak efficiency and remarkably low sideband reflectivity. Thus, this type of photodetector device represents basic new optical features with a significant potential for practical applications.     

Design of single-material guided-mode resonance filter

In this letter, a guided-mode resonance （GMR） filter with the same material for both the grating layer and the waveguide layer is designed, and its optical properties are investigated. The GMR filter owns almost 100% reflection at the resonance wavelength of 800 nm with the full-width at half-maximum （FWHM） of 20 nm, and its sideband reflection from 700 to 1000 nm is less than 5%. As the resonance wavelength is influenced by more than one parameter during the fabrication process, GMR filter with the same resonance wavelength can be obtained by adjusting other parameters or even one parameter to deviate from the design value.     

Study on external-cavity semiconductor laser

In this paper, a narrow-band tunable external-cavity semiconductor laser with the Littman set-up is reported. The laser system consists of a semiconductor laser, a blazed grating and an external mirror. Its sideband suppression ratio over 20 dB was obtained. Conveniently tuning in wavelength region of 797.38 - 807.26 nm was achieved. The laser is operating in single frequency with narrow linewidth smaller than 0.06 nm. The output beam has good directional stability when tuned.     

Thermally fixed reflection gratings for infrared light in LiNbO(3):Ti:Fe channel waveguides

We present a narrow-bandwidth interference filter in an optical monomode LiNbO>(3):Ti:Fe channel waveguide operating in the infrared wavelength region around lambda = 1.55 microm . The filter consists of a thermally fixed refractive-index Bragg grating recorded with visible green light by use of a holographic technique. In a first approach we measure a reflectivity for the infrared light of 60% and a linewidth (FWHM) of 0.11 nm.     

Widely tunable monolithic narrowband grating filter for near-infrared radiation

We propose a monolithic narrowband guided-mode grating filter in fused silica that is widely tunable in the near-IR wavelength region. Based on a recently demonstrated approach for a monolithic reflector comprising an encapsulated grating, we theoretically investigate such a device by means of rigorous modeling aimed at a narrow linewidth. It is demonstrated that upon a spatial variation of the filter's grating period its resonance wavelength can be tuned in a remarkably wide range of near-IR radiation with 800 nm<λ(res)< 1600 nm by translating the laser beam relative to the grating area. The filter performance in terms of linewidth and contrast is essentially preserved over the entire tuning interval.     

Resonant Brewster filters with absentee layers

A method for lowering the sideband levels associated with the spectral response of resonant waveguide-grating filters is presented. With a TM-polarized incident wave near the Brewster angle, the filter sidebands are suppressed by application of a half-wavelength absentee waveguide layer and an arbitrary-thickness grating layer. Adjusting the thickness of the grating layer permits control of the filter linewidth without appreciably affecting the sideband features. To verify the theoretical prediction, we fabricated and tested a double-layer waveguide-grating filter. It exhibited a peak efficiency of 82.4%, with sideband reflection levels below 0.6%, over a 95-nm spectral range.     

Wavelength tunable ultra-short pulses based on a flat broadband spectrum generated in a nonlinear ytterbium-doped fiber amplifier

We present a nonlinear ytterbium-doped fiber amplifier based on enhanced nonlinear effects that can produce a flat broadband spectrum ranging from 1050–1225 nm with a maximum average output power of 7.8 W at 14 W pump power.Its repetition rate is 89 MHz. Using a pair of gratings and two knife edges as a filter, wavelength tunable picosecond pulses of tens to hundreds of milliwatts can be obtained in the broadband spectrum range. The output power, pulse width, and spectrum(center wavelength and linewidth) are adjusted by tuning the distance of the grating pair and/or the knife edges.Fixing the distance between the two gratings at 15 mm and keeping the output spectrum linewidth at approximately 20 nm,the shortest pulse width obtained is less than 1 ps centered at 1080 nm. The longest wavelength of the short pulses is around1200 nm, and its output power and pulse width are 40 m W and 5.79 ps, respectively. The generation of a flat broadband spectrum is also discussed in this paper.     

基于低散射和高增益全息液晶/聚合物光栅的分布反馈式激光器

利用低官能度的丙烯酸酯单体进行全息液晶/聚合物光栅的制备, 获得了具有聚合物支撑形貌的光栅结构. 由于这种光栅内部不存在液晶微滴, 当作为分布反馈式激光器的谐振腔时, 可以有效降低光栅内部的散射损失(<4%), 降低激光腔损耗. 此外, 选用的高折射率单体提升了光栅的折射率调制量, 增强了光栅的反馈增益. 在以上两种因素的共同作用下, 采用染料DCM为激光工作物质, 以532 nm的Nd:YAG脉冲激光器作为抽运光源, 最终获得了中心波长为635 nm, 转化效率为1.2%的高性能激光, 在以阈值能量0.8 μJ/pulse抽运下获得激光线宽0.3 nm, 较之国内外同类激光器的报道, 在阈值、线宽、转化效率三方面均有不同程度提升.     

Tunable guided-mode resonance filter based on dielectric elastomer actuators

A tunable guided-mode resonant (GMR) reflection filter based on dielectric elastomer actuators (DEA) is designed. Simulating the characteristics of the filter with rigorous coupled wave analysis, it is shown that the resonant wavelength of the kind of GMR filter can be tuned from 1442.8 nm to 1644.6 nm by applying voltage on the dielectric elastomer actuators which changes the period of the grating layer of the GMR filter conveniently. Furthermore, there is an almost perfect linear relationship of resonant wavelength tuned and the period varied with negligible effect on the linewidth.     

Photonic mm-Wave Generation Using a Double Passband Fiber Bragg Grating Filter

We report a simplified version of a mm-wave generator employing the sideband filtering technique which uses a single optical sideband filter. Instead of using a Mach-Zehnder-like fiber network to select a pair of sidebands, we employ a single Fabry-Perot fiber Bragg grating with a pair of passbands separated by the mm-wave frequency. Using a single filter eliminated the need for polarization control and pathlength matching that was required by the former interferometer-like arrangement. We describe a 30 GHz generator design and present its mm-wave signal spectrum showing an instrument-limited linewidth of ~20 Hz. The generation of such an extremely narrow signal spectrum from a laser with a 1 MHz linewidth demonstrates the remarkable laser frequency noise cancellation property of the sideband filtering technique.     

850 nm centered wavelength-swept laser based on a wavelength selection galvo filter

A wavelength-swept laser is constructed using a free space external cavity configuration coupled with a fiberbased ring cavity at the 850 nm region. The external cavity filter employs a galvo-mirror scanner with a diffraction grating for wavelength selection. The filter is connected to a ring cavity through an optical circulator.The ring cavity contains a broadband semiconductor optical amplifier with a high optical output. The performance of this laser is demonstrated with broad bandwidths and narrow linewidths. The 3 dB linewidth and the bandwidth of this source are 0.05 nm(~20 GHz) and 48 nm, respectively. The maximum output power is 26 m W at 160 m A current.     

Electro-optic properties of switchable gratings made of polymer and nematic liquid-crystal slices

We report the diffraction properties at wavelengths of 632.8 and 1550 nm for volume transmission gratings made of a sequence of continuously aligned nematic liquid-crystal layers separated by isotropic polymer slices. The gratings are generated by holographically curing a solution of liquid crystal diluted in an isotropic prepolymer by means of a laser beam at a wavelength of 352 nm with a total intensity of approximately 10 mW/cm2. A diffraction efficiency of 98% was measured, and an electric field as low as 5 V/microm switches off the phase grating. Measured angular spectra are fitted by use of the modified coupled-mode theory including the effects of grating birefringence.     

Design of internal Brewster guided-mode resonance filter

An internal Brewster guided-mode resonance （GMR） filter is designed. For this kind of GMR filter, the Brewster reflection occurs at the interface of grating/waveguide layers rather than at the interface of air/grating layers. At Brewster angle of 60~, the GMR filter owns almost 100% reflection at the resonance wavelength of 800 nm with the full-width at half-maximum （FWHM） of 0.2 nm. Its angle response changing with the fabrication deviation is also discussed.     

基于透射式液晶/聚合物光栅的分布反馈式激光器的研究

本文研究了染料掺杂透射式液晶/聚合物光栅的制备以及基于透射式液晶/聚合物光栅的分布反馈式激光器的激光特性.实验选取DCM作为激光染料,制备了周期为586 nm的掺杂DCM的透射式液晶/聚合物光栅;使用532 nm输出的Nd ∶YAG倍频脉冲激光器作为抽运光源对染料掺杂液晶/聚合物光栅进行侧面抽运,得到了中心波长为603 nm的窄线宽、低阈值激光输出.激光线宽为1.4 nm、阈值能量约为17.3 μJ,与之前国外的报道相比,阈值能量有了很大幅度的降低. 关键词： 液晶/聚合物光栅 分布反馈式激光器 阈值 线宽     

Tunable Ytterbium-Doped Fiber Laser Based on a Mechanically Induced Long Period Holey Fiber Grating

We describe a tunable double-clad Yb-doped fiber laser based on a long period fiber grating mechanically induced in a section of single mode holey fiber inserted into the laser cavity. The mechanically induced long period holey fiber grating acts as a wavelength-selective fiber filter whose central wavelength, linewidth, and strength can be tuned by changing the period, the length of the grating, and the applied pressure. The fiber laser gives a ∼12.6 nm tuning range, from ∼1079:4–1092nm, with slope efficiencies of 18.7–26.3% at this wavelength range, with respect to the launched pump power.     

Widely tunable,narrow linewidth Tm: YAG ceramic laser with a volume Bragg grating

We report on a widely tunable, narrow linewidth operation of a Tm:YAG ceramic laser. A volume Bragg grating is used in the cavity as a folding mirror for wavelength selection. The wavelength is tuned from 1956.2 to1995 nm, leading to a total tuning range of 38.7 nm. The linewidth is around 0.1 nm over the whole tuning range. A maximum output power of 1.51 W at 1990.5 nm is achieved at 37.8 W absorbed pump power.Different saturation behaviors are observed in the laser performances at different wavelengths.     

Spatial and spectral filtering of tapered lasers by using tapered distributed Bragg reflector grating

A 1040 nm tapered laser with tapered distributed Bragg reflector (DBR) grating is designed and fabricated. By designing the grating with tapered layout, the tapered DBR grating exhibits the scattering effect on side backward-traveling waves, thus achieving additional suppression of parasitic oscillation. Under the suppression of parasitic oscillation, the spatial and spectral characteristics of the tapered laser are improved. The experimental results show that a near-Gaussian far-field distribution and a kink-free P-I characteristics are achieved, and a single peak emission with a wavelength of 1046.84 nm and a linewidth of 56 pm is obtained.     

Thermal tuning of a fixed Bragg grating for IR light fabricated in a LiNbO3:Ti channel waveguide

We investigate a thermally tunable integrated narrow-bandwidth interference filter for light in the infrared wavelength region around 5=1550 nm fabricated in a channel waveguide in lithium niobate. The filter is based on a holographically recorded and thermally fixed refractive-index Bragg grating. The device is connected to optical single-mode fibers and works polarization-independent. We measure a peak reflectivity of 95% and a linewidth (FWHM) of 0.09 nm. By temperature-controlling the peak wavelength of the filter is tuned. For the linear thermal expansion coefficient of lithium niobate along the c axis the value !₃₃=(4.5ǂ.5)᎒^-6 K^-1 is obtained. Permanent illumination of the filter with incoherent light allows us to adjust the peak reflectivity. Dedicated to Prof. K. Ringhofer on the occasion of his 60th birthday.