抗菌聚合物纳米纤维的研究进展

静电纺丝技术是制备功能聚合物纳米纤维的一种简单而有效的方法。由电纺纳米纤维堆砌而成的无纺织物具有巨大的比表面积,赋予其广泛的应用前景。通过在电纺聚合物纳米纤维中添加各类抗菌剂或对其表面进行化学改性,制备具有优异抗菌性能的新型功能聚合物纳米材料,将进一步拓展电纺纳米纤维在生物医学、过滤、精密制造等领域的应用。本文基于抗菌纳米纤维的分类进行总结,介绍国内外抗菌聚合物纳米纤维的研究现状,并对抗菌纳米纤维的未来发展进行了探讨。     

静电纺丝——从无规纳米纤维膜到取向连续长纱

静电纺丝是通过对聚合物溶液或熔体施加外电场制造纳米纤维的有效方法.电纺过程中,在静电力作用下聚合物射流快速鞭动,形成的纳米纤维无规堆砌,得到无纺布状的无规纳米纤维膜.这种纳米纤维膜具有极大的比表面积,已用于超高效过滤,在刨伤修复、组织工程、水处理等领域有广泛的应用前景.为了进一步拓展纳米纤维在纤维工业、纺织品、微制造等领域的应用,电纺纳米纤维的取向和连续长纱的制备研究受到科学家的重视,文献报道了多种纳米纤维取向方法.本文分析了纳米纤维膜无规堆砌结构的形成机理,总结了纳米纤维取向研究和连续长纱制备研究进展,特别介绍了基于静电作用分析提出的共轭电纺方法,讨论了取向纳米纤维的应用以及纳米纤维未来的研究方向.     

静电纺羟基磷灰石/明胶微纳复合纤维

本文从仿生角度出发,模拟细胞外基质独特结构,采用静电纺丝法成功制备出HA均匀分布的HA/Gelatin复合纤维。根据影响静电纺丝的主要因素,分别考察了聚合物浓度、无机物含量、溶剂浓度、电纺电压等因素对纤维形貌和结构的影响。研究结果表明:聚合物浓度是制备复合纤维的首要影响因素,影响复合纤维的直径;无机物的添加使聚合物中的氢键减少,降低了电纺液的粘度,影响复合纤维中珠状物的形成;制备分布均匀的电纺纤维,溶剂起很大的作用,影响纤维的粘联;电纺电压增大使电场力过大,聚合物被强力拉伸,单根纤维出现卷曲。     

离子浓度对电纺纤维沉积形态及表面形貌的影响

通过采用传统电纺丝装置(接收板接地或连接负压电源)、逆向电场及非接触式电纺丝装置等4种不同的电纺丝装置,在相同电压、接收距离、纺针直径、温湿度条件下,对20%的聚乙烯醇溶液进行电纺丝实验,观察不同装置中制得的纤维的沉积形态与形貌.还采用ANSYS有限元模拟对电纺丝装置的场强分布进行分析,并引入电化学理论解释了采用不同电纺装置时离子浓度的不同对所得电纺纤维形貌的影响,分析了产生差异的原因.     

刺激响应性电纺纳米纤维

采用静电纺丝法制备的、平均直径通常小于1000 nm的刺激响应性电纺纳米纤维是一种可响应外界刺激而发生物理化学性能改变的智能聚合物纤维,由它形成的纤维膜具有比表面积大、孔隙率高、对外界刺激产生响应速度快等优点,因此在诸多领域显示出诱人的应用前景,是近年来受到国内外高度关注的一种智能纳米材料。本文首先归纳了制备刺激响应性电纺纳米纤维的三种方法。然后从成纤聚合物的合成或选用、纺丝液配制、静电纺丝和后处理4个方面讨论了制备过程中影响纳米纤维尺寸、结构和刺激响应性等性能的主要因素。接下来重点述评了除电场外的其他各种刺激响应性电纺纳米纤维的设计及其构建研究进展,另外介绍了这些刺激响应性电纺纳米纤维膜在分离与纯化、药物控制释放、伤口敷料、细胞培养、传感器与检测等方面的应用研究情况。最后,就它们的未来研究方向进行了展望。     

聚合物的静电纺丝

静电纺丝法是聚合物溶液或熔体在静电作用下进行喷射拉伸而获得纳米级纤维的纺丝方法.由纳米纤维制得的无纺布,具有孔隙率高、比表面积大、纤维精细程度与均一性高、长径比大等优点,从而赋予了静电纺丝纤维广泛的应用前景,它已在国内外引起了广泛的关注.本文介绍了静电纺丝的装置、基本原理及静电纺丝制备纳米纤维的研究进展,同时也叙述了其在各个领域的应用,最后展望了静电纺丝制备纳米纤维的发展方向及前景.     

静电纺丝制备图案化无机纳米纤维

静电纺丝技术近几年在制备纳米纤维领域得到了广泛的应用,被认为是批量制备纳米纤维材料最简单有效的方法。本文综述了近几年高压静电纺丝技术制备图案化无机物纳米纤维的纺丝装置和过程,特别详细综述了纺丝过程中纤维直径的变化,利用带电流体动力学(EHD)理论推导出纤维直径变化的运动方程,并对方程进行一定程度的修订,以符合电纺无机物纳米纤维直径的变化;并综述了取向纳米纤维、中空纳米纤维、壳-核结构纳米纤维、纳米线、纳米带、纳米管及多层次结构纳米纤维的构建及其基本性能。最后对电纺制备图案化无机纳米纤维未来发展方向,特别是功能化多层次结构电纺无机纳米纤维制备进行了展望。     

电纺法及其在制备聚合物纳米纤维中的应用

在介绍电纺法的基础上,对电纺法制备聚合物和导电聚合物纳米纤维的影响参数和电纺纤维的应用研究进行了综述,同时展望了该方法在制备聚合物纳米纤维方面存在的挑战和机遇。     

静电纺丝纳米纤维基凝胶聚合物电解质的研究进展

凝胶聚合物电解质(GPEs)可以解决传统电池的漏液问题和低能量密度问题,提高电池的安全性能,使电池轻便化,薄型化和外形多样化。静电纺丝技术可以控制纤维的直径和孔隙率,平衡GPEs离子电导率和力学性能,实现两者的共同提高,引起众多学者的研究兴趣。重点对聚偏氟乙烯(PVDF)电纺膜基凝胶聚合物电解质和聚丙烯腈(PAN)电纺膜基凝胶聚合物电解质的制备工艺和性能的研究进展进行了介绍,并对静电纺丝纳米纤维基凝胶聚合物电解质存在的问题和研究方向进行了探讨。     

电纺法制备聚合物纳米纤维的研究进展

电纺技术是一种制备聚合物纳米纤维的新方法,它可制备出直径为纳米级的超细纤维,最小直径可至1nm.电纺法制备聚合物纳米纤维具有设备简单、操作容易以及高效等优点,它是目前能直接、连续制备聚合物纳米纤维的有效方法.本文介绍了电纺过程、原理及影响纤维性能的主要因素,综述了电纺技术在生物医学材料,复合增强纤维,无机纳米纤维,导电纳米纤维等方面的应用进展,最后对电纺技术在制备聚合物纳米纤维方面的发展前景作出了展望.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.