A facile synthesis and fungicidal activities of novel fluorine-containing pyrido[4,3-d]pyrimidin-4(3H)-ones

Sixteen novel 2-substituted-5,8,9-trimethyl-3-(4-fluoro-substituted)phenyl-thieno[3′,2′-5,6] pyrido[4,3-d]pyrimidin-4(3H)-ones 5a-5p were designed and have been successfully synthesized via tandem aza-Wittig and annulation reactions of the corresponding iminophosphorances 1, para-fluoro phenyl isocyanate, and substituted phenols or amines in 73-90% isolated yields. Their structures were clearly verified by IR, ¹H NMR, EI-MS spectroscopy and elemental analysis, and in the case of compound 5a, analyzed by single-crystal X-ray diffraction further. The results of preliminary bioassay indicated that some compounds possess inhibition activities against Rhizoctonia solani and Botrytis cinereapers at a dosage of 50 mg/L.     

Selective construction of indeno[1,2-b]phenothiazine and indeno[2,1-c]phenothiazine via tandem annulation reaction

AcOH promoted annulation reaction of 2-arylideneindane-1,3-diones with methyl 2-(benzo[b][1,4]thiazin-3-ylidene)acetate in refluxing ethanol afforded pentacyclic tetrahydroindeno [1,2-b]phenothiazine in satisfactory yields and with high diastereoselectivity according to the unexpected tandem annulation process. When the above reaction was carried out in refluxing acetic acid, isomeric dihydroindeno [1,2-b]phenothiazines and dihydroindeno [2,1-c]phenothiazines were obtained in comparable yields according to alternate tandem annulation process.     

γ-Selective allylic substitution reaction with Grignard reagents catalyzed by copper N-heterocyclic carbene complexes and its application to enantioselective synthesis

The reaction of allylic compounds with alkyl Grignard reagents in the presence of a catalytic amount of copper N-heterocyclic carbene (NHC) complexes proceeded predominantly in an S_N2′ reaction pathway to give γ-substituted product in excellent yield. The method was applied to asymmetric reaction by using optically active NHC ligands.     

A novel direct N-alkenylation of nitrogen-containing heterocycles with magnesium alkylidene carbenoids

Treatment of magnesium alkylidene carbenoids, which were generated from 1-chlorovinyl p-tolyl sulfoxides with isopropylmagnesium chloride at −78 °C in toluene, with N-lithio nitrogen-containing heterocycles (e.g., indole, indazole, phenothiazine, and phenoxazine) gave N-alkenylated products in moderate to good yields. The intermediate of this reaction was found to be the alkenyl anion, which could be trapped with iodoalkanes using CuI as a catalyst to give the heterocycles having fully substituted alkenes on the nitrogen. The alkenyl anion intermediate could be trapped also with benzoyl chloride and phenyl isocyanate. This reaction offers a quite novel and direct N-alkenylation of nitrogen-containing heterocycles.     

Anionic graft polymerization of lithiated poly(2,6-dimethyl-1,4-phenylene ether)

Lithiated poly(2,6-dimethyl-1,4-phenylene ether) has been used as an initiator for the graft polymerization of isoprene, methyl methacrylate, hexamethylcyclotrisiloxane, and phenyl isocyanate with the use of toluene and tetrahydrofuran as solvents. The products were examined by gel-permeation chromatography for evidence of homopolymerization and graft polymerization. The composition of the graft copolymers was determined by NMR, and for isoprene and hexamethylcyclotrisiloxane, termination by trialkylchlorosilanes enabled chain lengths to be determined by NMR. The use of toluene gave rise to some homopolymerization, but with tetrahydrofuran, only hexamethylcyclotrisiloxane gave homopolymer. In all cases, graft copolymers were formed. With isoprene and methyl methacrylate, soluble graft copolymers were formed in good yield. In the former case approximately 60% 3,4 and 40% 1,4 addition was found. In the latter case 1,1-diphenylethylene was used to reduce crosslinking, in its absence, methyl methacrylate gave only crosslinked gels in tetrahydrofuran. Hexamethylcyclotrisiloxane added only one molecule per lithium on the polymer, the remainder giving homopolymer. Phenyl isocyanate gave some soluble graft copolymer in toluene, but only crosslinked products were obtained when tetrahydrofuran was used as reaction solvent.     

New Pd-NHC-complexes for the Mizoroki-Heck reaction

The synthesis and structural characterization of novel chelating N-aryl substituted palladium(II)-biscarbene-complexes is reported: 1,1′-bis(4-bromophenyl)-3,3′-methylene-diimidazoline-2,2′-diylidene-palladium(II)-dibromide, 1,1′-bis(4-methoxyphenyl)-3,3′-methylene-diimidazoline-2,2′-diylidene-palladium(II)-dibromide and 1,1′-bis(4-n-butoxyphenyl)-3,3′-methylenediimidazoline-2,2′-diylidene-palladium(II)-dibromide have been synthesized in good yields. The catalytic activity of these 1,1′-aryl-3,3′-methylenediimidazoline-2,2′-diylidene-palladium(II)-dihalogenide complexes was tested for the Mizoroki-Heck reaction in comparison to 1,1′-(bis)methyl-3,3′-methylenediimidazoline-2,2′-diylidene-palladium(II)-dihalogenide complexes and to 1,1′-bis(phenyl)-3,3′-methylene-diimidazoline-2,2′-diylidene-palladium(II)-dibromide. The activity of the aryl substituted catalysts is significantly higher compared to the methyl substituted NHC complexes. They also allow the coupling of arylchlorides with olefins.     

Recyclable N-heterocyclic carbene/palladium catalyst on graphene oxide for the aqueous-phase Suzuki reaction

Graphene oxide (GO) was functionalized with a N-heterocyclic carbene (NHC) precursor, 3-(3-aminopropyl)-1-methylimidazolium bromide ([APMIm][Br]) for the immobilization of palladium catalyst. The GO-supported NHC precursor (IMGO) formed a stable complex with Pd(OAc)₂ (GO–NHC–Pd), which showed excellent catalytic activity and fast reaction kinetics in the aqueous-phase Suzuki reaction of aryl bromides and chlorides at relatively mild conditions (1 h at 50 °C). The GO–NHC–Pd catalyst was reused several times without any loss of its catalytic activity in the Suzuki reaction of aryl bromide.     

Acceleration of the imine base/isocyanate (IBI)‐mediated polymerization of MMA caused by ionic liquid traces

The brutto rate of the imine base/isocyanate (IBI)‐mediated radical polymerization of methyl methacrylate (MMA) can be significantly increased by use of ionic liquid (IL) traces. At least, catalytic amounts of IL influence both the value of the brutto polymerization rate ν_Br,0 and the necessary reaction temperature of the used IBI mixture. Combinations of 2‐phenyl‐2‐oxazoline (POX) or 1‐methyl pyrazole (1MP) with isocyanates are IBI systems that usually do not initiate MMA at room temperature. By adding traces of 1‐ethyl‐3‐methylimidazolium tris(pentafluoroethyl)trifluorophosphate ([Emim]FAP), polymethyl methacrylate (PMMA) with high average molecular weight can be obtained whereas the initiator mixture (imine base/isocyanate) concentration can be decreased by a factor of 10. The polymerization kinetics of several IBI combinations in the presence of ILs has been determined and a comparison to non‐IL containing initiator mixtures is given. Additionally, the temperature dependence of the IL‐containing polymerizations was measured. The interaction of the IL with MMA and the individual IBI initiator components is studied by means of attenuated total reflection Fourier transformation middle infrared spectroscopy (ATR FT MIR). Furthermore, the IBI brutto polymerization rate constants k_Br,0 were brought into relation to the IL hydrogen bond donating ability α. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Tetraphosphine/palladium-catalyzed Heck reactions of aryl halides with disubstituted alkenes

cis,cis,cis-1,2,3,4-Tetrakis(diphenylphosphinomethyl)cyclopentane/[PdCl(C₃H₅)]₂ efficiently catalyses the Heck reaction of disubstituted alkenes such as methyl crotonate, ethyl cinnamate, methyl methacrylate or α-methylstyrene with a variety of aryl halides. In the presence of 1,2-disubstituted alkenes the stereoselectivities of the reactions strongly depend on the substituents of the alkenes. Selectivities up to 97% in favor of E-isomers can be obtained for the addition to methyl crotonate. With the 1,1-disubstituted alkenes methyl methacrylate or α-methylstyrene mixtures of products are obtained.     

Grafting to Vinylpyrrolidone Polymers and Copolymers by the Ceric lon Method

Polymers and copolymers of vinylpyrrolidone were investigated as grafting substrates for methyl methacrylate using the ceric ion method. Ceric ion readily initiates methyl methacrylate grafting to commercial poly (vinylpyrrolidone) (PVP) of 360,000 nominal molecular weight. The resulting graft copolymer was surprisingly found to be an ABA triblock system with PVP in the center block. This conclusion is supported by three key pieces of evidence: first, selective degradation of the PVP/MMA graft copolymer showed two PMMA grafts per PVP chain: second, blocking of what are apparently hydroxylic or glycolic PVP end groups by reaction with phenyl isocyanate rendered the PVP unreactive to ceric ion grafting; third, if the PVP is prepared by methods which preclude formation of hydroxylic end groups, the PVP is unreactive to ceric ion grafting.

Vinylpyrrolidone polymers can be made graftable via ceric ion if N-methacryloyl-D-glucosamine (NMAG) is incorporated as a comonomer in the PVP backbone. Regardless of the method of preparation, incorporation of NMAG provides grafting sites which are highly reactive to ceric ion. At copolymer compositions up to 10 mole % NMAG, the methyl methacrylate graft copolymers are soluble in organic solvents. Above 10 mole % NMAG, the grafting reaction leads to cross-linking and formation of intractable gels.     

A density functional theory study on mechanisms of [4 + 2] annulation of enal with α-methylene cycloalkanone catalyzed by N-heterocyclic carbene

Density functional theory was used to study the reaction mechanisms of the N-heterocyclic carbene (NHC)-catalyzed [4 + 2] annulation reaction between enal and α-methylene cycloalkanone for the formation of tricyclic benzopyran-2-one. The simulations suggest that the energy-favorable catalytic cycle includes five steps: (a) the nucleophilic addition of enal by NHC catalyst; (b) [1, 2]-proton transfer for the formation of Breslow intermediate; (c) [1, 4]-proton transfer for the formation of enolate intermediate; (d) the [4 + 2] cycloaddition process, product formation; and (e) catalyst regeneration. The proton transfer process was particularly designed in two independent ways, the direct proton transfer and the Brønsted acid DBU∙H⁺-mediated proton transfer. Our study reveals that [1, 2]-proton transfer process is the rate-determining step with the accessible energy barrier, which agrees with the experimental observation. Further analysis of the global reaction index confirmed that NHC was primary used as a Lewis base during the reaction processes. The frontier molecular orbital (FMO) analysis indicates that the introduction of the NHC catalyst facilitates the reaction to occur due to the narrower energy gap of FMO.     

PEPPSI-Pd-NHC catalyzed Suzuki-Miyaura cross-coupling reactions in aqueous media

A series of unsymmetrical 1,3-disubstituted benzimidazolium chlorides were synthesized as N-heterocyclic carbene (NHC) precursors. These compounds were used to synthesize of the PEPPSI-type palladium NHC complexes. The structures of all compounds were characterized by ¹H NMR, ¹³C NMR, FT-IR spectroscopy and elemental analyses. The catalytic activity of the PEPPSI-type palladium–NHC complexes has been evaluated with respect to the Suzuki-Miyaura cross-coupling reactions of phenyl boronic acid with various aryl halides in aqueous media.     

茂基稀土胺化物的合成及其作为单组份引发剂引发极 性单体聚合的研究

综述了近年来我们在茂基稀土胺化物的合成、结构及其催化极性单体,包括甲基丙烯酸甲酯、甲基丙烯酸N,N-二甲氮乙酯、异氰酸苯酯的聚合和ε-己内酯开环聚合的研究结果。讨论了茂基稀土胺化物的结构与催化活性的关系,提出了可能的聚合反应机理。     

A novel synthesis and herbicidal activity of fluorine-containing pyrazolo[3,4-d]pyrimidin-4-one derivatives

The 6-(4-alkoxycarbonylalkoxy)phenoxy-3-alkylthio-5-(fluoro-substituted)phenyl-1-phenylpyrazolo[3,4-d]pyrimidin-4-ones 6 have been successfully synthesized via a tandem aza-Wittig and annulation reactions of the corresponding iminophosphorances 4, aromatic isocyanate, and substituted phenols 2 in 59-69% isolated yields using actonitrile as solvent. These novel compounds 6 could be oxidized to sulfones 7 by hydrogen peroxide in satisfactory yields (57-93%). Their structures were clearly verified by spectroscopic data (IR, ¹H NMR, ¹³C NMR, MS, Elemental analysis or X-ray diffraction crystallography). The results of preliminary bioassay indicated that these compounds possess herbicidal activity against the root of rape and barnyard grass.     

Synthesis of the repeating trisaccharide unit of the cell wall lipopolysaccharide of Escherichia coli type 8

NIS/TfOH mediated glycosidation of methyl 3,4,6-tri-O-benzyl-α-d-mannopyranoside with phenyl 2-O-acetyl-3,4,6-tri-O-benzyl-1-thio-α-d-mannopyranoside furnished the corresponding disaccharide derivative in excellent yield and α-selectivity. Zémplen deacetylation of the same followed by reaction with BSP/Tf₂O-preactivated phenyl 4,6-O-benzylidene-2,3-di-O-benzyl-1-thio-α-d-mannopyranoside generated methyl 4,6-O-benzylidene-2,3-di-O-benzyl-β-d-mannopyranosyl-(1→2)-3,4,6-tri-O-benzyl-α-d-mannopyranosyl-(1→2)-3,4,6-tri-O-benzyl-α-d-mannopyranoside in very good yield and excellent β-selectivity. Pd/C catalyzed hydrogenation of the latter finally afforded the repeating trisaccharide of Escherichia coli 8 O-antigen as its methyl glycoside.     

Effect of isocyanate structure on deblocking and cure reaction of N-methylaniline-blocked diisocyanates and polyisocyanates

Two series of N-methylaniline-blocked isocyanates based on monomeric diisocyanates such as 4,4′-methylene bis(phenyl isocyanate), toluene-2,4-diisocyanate, isophorone diisocyanate and 1,6-diisocyanato hexane and their NCO terminated polyurethane prepolymer (polyisocyanates) were prepared and characterized thoroughly by FTIR, ¹H NMR, ¹³C NMR and EI-Mass spectroscopic methods. The blocking reaction of N-methylaniline with aromatic isocyanates and aromatic polyisocyanates occur faster when compared to the aliphatic isocyanates. The deblocking reactions of blocked isocyanates were carried out under dynamic and isothermal conditions using hot-stage FTIR spectrophotometer. The dynamic method was used to determine the deblocking temperature, and the isothermal method was used to calculate kinetics and thermodynamics parameters. Cure reactions of blocked isocyanates with hydroxyl-terminated polybutadiene were also followed to establish the structure-property relationship of the N-methylaniline-blocked isocyanates. The deblocking studies of blocked isocyanates reveal that the aromatic isocyanates undergo deblocking easily compared to aliphatic isocyanates. The rate of deblocking reaction of N-methylaniline-blocked aromatic polyisocyanates was found to be higher compared to N-methylaniline-blocked aromatic monomeric diisocyanate adducts. On the other hand, this trend was just reverse in the cure-reaction studies. The dissolution behavior of N-methylaniline-blocked isocyanates in Terathane-2000, polypropylene glycol-2000, polycaprolactone diol-2000 and hydroxyl-terminated polybutadiene-2500 was also studied and found that all adducts are soluble in these polyols.     

Functional polymethacrylates as bacteriostatic polymers

Two copolymers, P(PCEMA-co-MMA) and P(t-BMA-block-PCEMA), were prepared via ATRP using 2-(phenoxycarbonyloxy)ethyl methacrylate (PCEMA) as reactive monomer and methyl methacrylate (MMA) or tert-butyl methacrylate (t-BMA) as co-monomers. Alternatively phenoxycarbonyloxy decorated polymethacrylates were obtained via polymer analogous reaction: P(HEMA) was reacted with phenyl chloroformate to yield P(PCEMA). The highly reactive phenoxycarbonyloxy groups were used for polymer analogous reactions with nucleophiles to obtain polymers with ionic/hydrophilic and hydrophobic side groups. Different amines with long alkyl chains or tertiary amine groups were reacted with phenoxycarbonyloxy decorated polymers and subsequently reacted with methyl iodide to obtain amphipathic polymers with bacteriostatic properties.     

NHC-catalysed retro-aldol/aldol cascade reaction enabling solvent-controlled stereodivergent synthesis of spirooxindoles

An N-heterocyclic carbene (NHC)-catalysed retro-aldol/aldol cascade reaction of spirooxindole-based β-hydroxyaldehyde has been developed. The ring opening-closure process enables the diastereodivergent synthesis of spirocyclopentaneoxindole products with four consecutive stereocenters by simply changing the reaction solvents (THF or DCE). The Michael/aldol/retro-aldol/aldol sequential protocol allows the diastereodivergent synthesis of spirocyclopentaneoxindoles from 3-substituted oxindole and α,β-unsaturated aldehyde under the relay catalysis of a chiral secondary amine and an NHC catalyst. Moreover, four stereoisomers of the product can be selectively provided by using different combinations of a chiral secondary amine and a solvent.     

Some Reactions of Vinyl Isocyanate and Its Copolymers∗

Linear, soluble copolymers of vinyl isocyanate with styrene and methyl methacrylate were obtained when the comonomer:vinyl isocyanate ratio in the copolymer was greater than 9:1. When the comonomer to isocyanate ratio was less than 2:1, the copolymers were insoluble. Infrared evidence indicated that spontaneous cross-linking through the isocyanate function occurred by a mechanism similar to the known reaction by which isocyanates undergo dimerization and trimerization. The soluble copolymers retained the reactive isocyanate moeity as was shown by their reactivity with n-butylamine and ethanol to produce, respectively, the corresponding polyurea and polycarbamate, and with ethylenediamine and water to produce cross-linked polymers. The intrinsic viscosity [η] for the 9:1 methyl methacrylate: vinyl isocyanate copolymer was 0.22 dl/g while that for the corresponding ethyl carbamate was 0.24 dl/g.     

Copper-free Sonogashira cross-coupling reaction catalyzed by polymer-supported N-heterocyclic carbene palladium complex

A core-shell type of polymer-supported N-heterocyclic carbene (NHC) palladium catalyst was applied to Sonogashira cross-coupling reactions without copper cocatalyst under ambient atmosphere. This supported NHC-palladium complex efficiently catalyzed the copper-free Sonogashira reaction of various aryl iodides and bromides with terminal alkynes; the reaction exhibited high dependency on the temperature and the amount of base as well as its nature. In addition, this heterogeneous catalyst exhibited good reusability for the copper-free Sonogashira reaction.