On-line preconcentration and determination of cobalt by chelating microcolumns and flow injection atomic spectrometry

A simple and sensitive flow injection analysis-atomic absorption spectrometric procedure is described for the determination of cobalt. The method is based upon on-line preconcentration of cobalt on a microcolumn of 2-nitroso-1-naphthol immobilized on surfactant coated alumina. The trapped cobalt is then eluted with ethanol (250 μl) and determined by flame atomic absorption spectrometry. The analytical figures of merit for the determination of cobalt are as follows: detection limit (3 S), 0.02 ng ml⁻¹; precision (RSD), 2.8% for 20 ng ml⁻¹ and 1.7% for 70 ng ml⁻¹ of cobalt; enrichment factor, 125 (using 25 ml of sample). The method has been applied to the determination of cobalt in water samples, vitamin B₁₂ and B-complex ampoules and accuracy was assessed through recovery experiment and independent analysis by furnace AAS.     

Development a robust ionic liquid-based dispersive liquid-liquid microextraction against high concentration of salt combined with flame atomic absorption spectrometry using microsample introduction system for preconcentration and determination of cobalt in water and saline samples

A robust ionic liquid-based method for dispersive liquid-liquid microextraction was developed for the determination of cobalt in saline samples. Its robustness was increased by introducing a common ion of the IL into the sample solution. The concentration of cobalt in the settled phase of the ionic liquid was determined by the FAAS using a homemade microsample injection valve. Under the optimized conditions, the calibration graph was linear in the concentration range from 0.4 to 120 ??g L^?1 with the detection limit of 0.1 ??g L^?1. Accuracy was checked against the ISO standard method. The method was successfully applied to the determination of cobalt in water and saline samples.     

Spectrophotometric studies on complexation reactions of some water-soluble 5-nitro-2-pyridylhydrazones with cobalt. Spectrophotometric and derivative spectrophotometric determination of trace cobalt with 2-benzimidazolyl-3-sulphophenylmethanone 5-nitro-2-pyridylhydrazone

The complexation reactions of four water-soluble hydrazones, 2-quinolyl-3-sulphophenylmethanone 5-nitro-2-pyridylhydrazone, 3-sulphophenyl-2-thiazolylmethanone 5-nitro-2-pyridylhydrazone (STNPH), 2-benzothiazolyl-3-sulphophenylmethanone 5-nitro-2-pyridylhydrazone and 2-benzimidazolyl-3-sulphophenylmethanone 5-nitro-2-pyridylhydrazone (BISNPH), with cobalt(II) were studied spectrophotometrically. These hydrazones react with cobalt(II) to form stable 1:2 (metal:ligand) complexes, except for STNPH, which forms a 1:1 complex, with high molar absorptivities. A sensitive and selective spectrophotometric method for the determination of cobalt with BISNPH has been developed. The cobalt(II)-BISNPH complex is formed quantitatively in the pH range 2.7–9.4 and oxidized rapidly to give the corresponding cobalt(III) complex with an absorption maximum at 517 nm. Beer's law is obeyed over the range 0.02–1.0 μg ml^?1 and the apparent molar absorptivity of the cobalt(III) complex is 6.65 × 10⁴ l mol^?1 cm^?1 at 517 nm. The method was applied to the determination of cobalt in iron and steel samples with satisfactory results. The sensitivity is increased 11-fold by use of second-derivative spectrophotometry.     

Spectrophotometric determination of cobalt(II) with 2-(3′-sulfobenzoyl)pyridine benzoylhydrazone

A simple method has been described for the Spectrophotometric determination of cobalt(II) with 2-(3′-sulfobenzoyl)pyridine benzoylhydrazone (SBPBH). In aqueous solution, cobalt(II) reacts with SBPBH to form a yellow complex, which is not destroyed even by the addition of 3.8 M perchloric acid. The absorption maximum of the complex in 1.5 M perchloric acid medium was found to be 400 nm; the molar absorptivity was 2.17 × 10⁴ liters mol⁻¹ cm⁻¹. The proposed method is fairly selective and has been applied to the determination of cobalt in standard alloy steel samples.     

Dispersive liquid-liquid microextraction for simultaneous determination of cadmium, cobalt, lead and nickel in water samples by inductively coupled plasma optical emission spectrometry

We report on a new method for the dispersive liquid-liquid microextraction of Cd(II), Co(II), Pb(II) and Ni (II) from water samples prior to their simultaneous determination by inductively coupled plasma optical emission spectrometry (ICP-OES). The procedure is based on the injection of a ternary solvent system composed of appropriate quantities of extraction solvent (trichloroethylene), dispersive solvent (ethanol), and the chelating reagent 2-(2′-benzothiazolylazo)-p-cresol into the sample solution. The solution turns turbid immediately after injection, and the analytes are extracted into the droplets of the organic phase which was dried and dissolved in a mixture of Triton X-114, nitric acid, and ethanol. The metal ions in this mixture were quantified by ICP-OES. The detection limits under optimized conditions are 0.2, 0.3, 0.2 and 0.7?μg?L^?1 for Cd(II), Co(II), Pb(II) and Ni(II), respectively. The enrichment factors were also calculated for Cd (13), Co (11), Pb (11) and Ni (8). The procedure was applied to the determination of cadmium, cobalt, lead and nickel in certified reference material (waterway sediment) and water samples.

Activated carbon cloth filled pipette tip for solid phase extraction of nickel(II), lead(II), cadmium(II), copper(II) and cobalt(II) as 1,3,4-thiadiazole-2,5-dithiol chelates for ultra-trace detection by FAAS

A solid phase extraction method is established for preconcentration of nickel, lead, cadmium, copper and cobalt using pipette tip solid phase extraction. The presented process was dependent on chelation of analytes with 1,3,4-thiadiazole-2,5-dithiol, then allowing the solution to flow through an activated carbon cloth packed pipette tip. The adsorbed metal chelates on the surface of activated carbon cloth were eluted by 5 mL of 3 M HNO₃. The concentrations of nickel, lead, cadmium, copper and cobalt were detected using a flame atomic absorption spectrometer (FAAS). The pipette tip solid phase extraction exhibit a preconcentration factor of 120. The limit of detection values were 2.7, 1.7, 1.3, 2.0 and 2.9 µg L^?1 for Ni(II), Pb(II), Cd(II), Cu(II) and Co(II), respectively. Validation of the method was checked by the analysis of TMDA-53.3 and TMDA-64.2 certified reference materials. The method was successfully applied for water and fertiliser samples.     

Determination of trace amounts of lead, arsenic, nickel and cobalt in high-purity iron oxide pigment by inductively coupled plasma atomic emission spectrometry after iron matrix removal with extractant-contained resin

Inductively coupled plasma atomic emission spectrometry (ICP-AES) was applied to the determination of lead, arsenic, nickel and cobalt in high-purity iron oxide pigment. Samples were dissolved with hydrochloric acid and hydrogen peroxide. The digest was passed through a column, which was packed with a polymer resin containing a neutral organophosphorus extractant, tri-n-butylphosphate. Iron was sorbed selectively on the resin and the analytes of interest passed through the column, allowing the effective separation of them from the iron matrix. Conditions of separation were optimized. The detection limits (3σ) in solution were 10, 40, 7 and 5 μg L⁻¹, and in pigment were 0.2, 0.8, 0.14 and 0.1 mg kg⁻¹ for lead, arsenic, cobalt and nickel, respectively. The recoveries ranged from 95% to 107% when sample digests were spiked with 5 μg of the analytes of interest, and relative standard deviations (n = 6) were 1.5-17.6% for the determination of the spiked samples. The method was successfully applied to the determination of trace amounts of these elements in high-purity iron oxide pigment samples.     

A procedure for determination of cobalt in water samples after dispersive liquid–liquid microextraction

In this work, a procedure for preconcentration of cobalt using dispersive liquid–liquid microextraction (DLLME) with the reagent Br-TAO as complexing reagent was developed. The procedure is based on a ternary system of solvents, where appropriate amounts of the extraction solvent, disperser solvent and the chelating agent Br-TAO are directly injected into an aqueous solution containing Co(II). A cloudy mixture is formed and the ions are extracted in the fine droplets of the extraction solvent. After extraction, the phase separation is performed with a rapid centrifugation, and cobalt is determined in the enriched phase by FAAS. Under the optimized conditions, the detection limit obtained was 0.9 µg L^{− 1}. The enrichment factor and the consumptive index were 16 and 0.31 mL, respectively. The accuracy of the method was tested by the determination of cobalt in certified reference material of spinach leaves, NIST 1570a. The proposed procedure was successfully applied to the determination of cobalt in water samples.     

Preconcentration of trace lead by adsorption onto a tantalum wire for electrothermal atomization atomic absorption spectrometry with a tungsten tube atomizer

A preconcentration method of lead in waters by adsorption on a tantalum wire was developed for electrothermal atomization atomic absorption spectrometry with a tungsten tube atomizer. After the preconcentration, the tantalum wire was directly inserted into the tungsten tube atomizer. In the preconcentration (adsorption) process for lead, the optimal immersing time was 90 s and the best pH was 4. Under the optimal conditions, the detection limit for lead by the tantalum wire preconcentration method was 6.0 pg mL^− 1 (3S/N) and the relative standard deviation was 6.1%. The influences of large amounts of concomitants on the preconcentration of lead were evaluated. Even though 10³ to 10⁴-fold excess of matrix elements existed in aqueous solution, the lead absorption signal was not significantly affected by the matrix elements. The method with preconcentration on a tantalum wire was applied to the determination of lead in river waters and proved to be sensitive, simple, and convenient. Because this preconcentration method can be utilized in the in-situ treatment of trace lead in environmental water samples, it was unnecessary to carry the water samples to the analytical work place. The present technique was shown to be useful for the determination of lead in environmental water samples at 0.1−1 μg L^− 1.     

Dispersive liquid–liquid microextraction and spectrophotometric determination of cobalt in water samples

A new simple and rapid dispersive liquid–liquid microextraction has been applied to preconcentrate trace levels of cobalt as a prior step to its determination by spectrophotometric detection. In this method a small amount of chloroform as the extraction solvent was dissolved in pure ethanol as the disperser solvent, then the binary solution was rapidly injected by a syringe into the water sample containing cobalt ions complexed by 1-(2-pyridylazo)-2-naphthol (PAN). This forms a cloudy solution. The cloudy state was the result of chloroform fine droplets formation, which has been dispersed in bulk aqueous sample. Therefore, Co-PAN complex was extracted into the fine chloroform droplets. After centrifugation (2 min at 5000 rpm) these droplets were sedimented at the bottom of conical test tube (about 100 µL) and then the whole of complex enriched extracted phase was determined by a spectrophotometer at 577 nm. Complex formation and extraction are usually affected by some parameters, such as the types and volumes of extraction solvent and disperser solvent, salt effect, pH and the concentration of chelating agent, which have been optimised for the presented method. Under optimum conditions, the enhancement factor (as the ratio of slope of preconcentrated sample to that obtained without preconcentration) of 125 was obtained from 50 mL of water sample, and the limit of detection (LOD) of the method was 0.5 µg L^?1and the relative standard deviation (RSD, n = 5) for 50 µg L^?1 of cobalt was 2.5%. The method was applied to the determination of cobalt in tap and river water samples.     

Ligandless,Task-Specific Ionic Liquid-Based Ultrasound-Assisted Dispersive Liquid–Liquid Microextraction for the Determination of Cobalt Ions by Electrothermal Atomic Absorption Spectrometry

Ligandless, task-specific ionic liquid based ultrasound-assisted dispersive liquid–liquid microextraction (TSIL-USA-DLLME) was used for preconcentration of cobalt ions in food and water samples and in vitamin supplements before analysis by electrothermal atomic absorption spectrometry. The reported method is free of toxic volatile organic solvents and does not require the use of a back-extraction step. The dispersion of extractant was achieved with the use of ultrasound. A TSIL, trioctylmethylammonium thiosalicylate (TOMATS), was served as both the extraction and complexing agent. After microextraction, the TOMATS phase was separated by centrifugation and dissolved in ethanol before analysis. Selected parameters affecting the microextraction including the pH of the sample, the volume of the ionic liquid, the ultrasonication time, centrifugation parameters, and the influence of ionic strength were optimized. The limit of detection was 0.011?ng?mL^?1 for cobalt ions. The achieved preconcentration factor was 24. The relative standard deviations for the determination of analyte in the real samples were 3–24%. The accuracy of this method was evaluated by the extraction and determination of the analyte in several certified reference materials including INCT-SBF-4 (soya bean flour), INCT-TL-1 (tea leaves), ERM-CAO11b (hard drinking water), INCT-MPH-2 (mixed Polish herbs), TMDA-54.5 (Lake Ontario Water), and NIST 1643e. The measured cobalt contents were in satisfactory agreement with the certified concentrations based on Student’s t-test at the 95% confidence level. The presented method has been successfully applied for the determination of analyte in real samples that include tea, lake water, and vitamin supplements.     

Optimization and validation of an automated voltammetric stripping technique for ultratrace metal analysis

A new automated batch method for the determination of ultratrace metals (nanogram per liter level) was developed and validated. Instrumental and chemical parameters affecting the performance of the method were carefully assessed and optimized. A wide range of voltammetric methods under different chemical conditions were tested. Cadmium, lead and copper were determined by anodic stripping voltammetry (ASV), while nickel, cobalt, rhodium and uranium by adsorptive cathodic stripping voltammetry (AdCSV). The figures of merit of all of these methods were determined: very good precision and accuracy were achieved, e.g. relative percentage standard deviation in the 4-13% for ASV and 2-5% for AdCSV.The stripping methods were applied to the determination of cadmium, lead, copper, nickel, cobalt, rhodium and uranium in lake water samples and the results were found to be comparable with ICP-MS data.     

Determination of trace iron in indium phosphide wafer by on-line matrix separation and inductively coupled plasma mass spectrometry

A method for the determination of iron in indium phosphide (InP) wafer is proposed. In the present experiment, an on-line matrix separation system using an ion exchange column was combined with inductively coupled plasma mass spectrometry (ICP-MS) for the determination of ng g⁻¹ level of iron. In the on-line matrix separation, indium and iron in the sample solution was passed through a strongly-basic anion exchange resin column with the 9 M HCl carrier solution, where indium was eluted from the column and iron was adsorbed on it. Then, iron was eluted with the carrier solution of 0.3 M HCl containing 1 ng ml⁻¹ cobalt, and it was directly introduced into the ICP-MS nebulizer. In ICP-MS measurement, cobalt in the carrier solution was used as an internal standard to correct the change in sensitivity due to matrix effect, and the peak area integration was performed to quantify iron and cobalt in the integration time range of 20-60 s from the start of the cobalt solution flow. The detection limit (3σ) for iron was 3 ng g⁻¹, and the recoveries for iron in the 0.8, 2.4, and 8.0% indium solutions were almost 100%. The method was applied to the determination of iron in commercially available iron-doped InP wafers. The obtained results for InP wafer samples with the high iron concentration were in good agreement with those obtained by graphite furnace atomic absorption spectrometry (GFAAS).     

On-line liquid phase micro-extraction based on drop-in-plug sequential injection lab-at-valve platform for metal determination

A novel automatic on-line liquid phase micro-extraction method based on drop-in-plug sequential injection lab-at-valve (LAV) platform was proposed for metal preconcentration and determination. A flow-through micro-extraction chamber mounted at the selection valve was adopted without the need of sophisticated lab-on-valve components. Coupled to flame atomic absorption spectrometry (FAAS), the potential of this lab-at-valve scheme is demonstrated for trace lead determination in environmental and biological water samples. A hydrophobic complex of lead with ammonium pyrrolidine dithiocarbamate (APDC) was formed on-line and subsequently extracted into an 80 μL plug of chloroform. The extraction procedure was performed by forming micro-droplets of aqueous phase into the plug of the extractant. All critical parameters that affect the efficiency of the system were studied and optimized. The proposed method offered good performance characteristics and high preconcentration ratios. For 10 mL sample consumption an enhancement factor of 125 was obtained. The detection limit was 1.8 μg L⁻¹ and the precision expressed as relative standard deviation (RSD) at 50.0 μg L⁻¹ of lead was 2.9%. The proposed method was evaluated by analyzing certified reference materials and applied for lead determination in natural waters and urine samples.     

Preconcentration of trace amounts of cobalt (II) ions in water and agricultural products samples using of 5-(4-dimethylaminobenzylidene) rhodanin modified SBA-15 sorbent prior to FAAS determination

In the present study, the ?5-(4-dimethylaminobenzylidene)rhodanin-modified SBA-15? was applied as stable solid sorbent for the separation and preconcentration of trace amounts of cobalt ions in aqueous solution. SBA-15 was modified by ?5-(4-dimethylaminobenzylidene)rhodanin reagent. The sorption of Co²⁺ ions was done onto modified sorbent in the pH range of 6.8–7.9 and desorption occurred in 5.0 mL of 3.0 mol L^?1 HNO₃. The results exhibit a linear dynamic range from 0.01 to 6.0 mg L^?1 for cobalt. Intra-day (repeatability) and inter-day (reproducibility) for 10 replicated determination of 0.06 mg L^?1 of cobalt was ±1.82% and ?±1.97%?. Detection limit was 4.2 µg L^?1 (3S_b, n = 5) and preconcentration factor was 80. The effects of the experimental parameters, including the sample pH, flow rates of sample and eluent solution, eluent type and interference ions were studied for the preconcentration of Co²⁺. The proposed method was applied for the determination of cobalt in standard samples, water samples and agricultural products.     

Kinetic spectrophotometric method for the determination of urinary cobalt based on its catalytic effect on the oxidation of -adrenaline hydrochloride by hydrogen peroxide

A catalytic for determination of nanomolar concentrations of Co(II), i.e., oxidation of -adrenaline hydrochloride with H₂O² in alkaline medium, is proposed. The reaction gives a low limit of detection of 2.5 × 10 ⁻⁹ M Co(II) in the reaction mixture, good reproducibility with a relative standard deviation (R.S.D.) of 4−5% in the Co(II) concentration range 8.0 × 10⁻⁹−8.0 × 10⁻⁸M and good selectivity. On the basis of this indicator reaction, a catalytic-spectrophotometric method for the determination of cobalt in small urine samples (5.00 ml) was elaborated. The analysis of 17 urine samples, taken from healthy persons of different ages, gave cobalt concentrations in the range 0.20–1.50 μmol 1⁻¹. The R.S.D. for ten replicate analyses of a urine sample with an average cobalt content of 0.63 μmol 1⁻¹ was 5.6%. The reliability of the method was verified by a comparative photometric method (r = 0.9755) and by a determination based on known additions of cobalt (r = 0.9894).     

A rapid spectrophotometric method for the determination of cobalt in industrial, environmental, biological, pharmaceutical and soil samples using bis(5-bromosalicylaldehyde)orthophenylenediamine

A very simple, ultra-sensitive and fairly selective spectrophotometric method is presented for the determination of cobalt at trace levels using bis(5-bromosalicylaldehyde)orthophenylenediamine (BBSOPD). The method is based on the reaction of nonabsorbent BBSOPD in a slightly acidic (0.001–0.0025 M H₂SO₄ or pH 3.4–4.0) and 50% N,N-dimethylformamide media with cobalt(II) to produce a highly absorbent orange colored chelate-product with an absorption maximum at 473 nm. The reaction is instantaneous and the absorption remains stable for 24 h. The average molar absorption coefficient and Sandell’s sensitivity were found to be 5.84 × 10⁴ l mol^-1 cm^-1 and 9.0 ng cm^-2 of cobalt(II), respectively. Linear calibration graphs were obtained for 0.02–4.0 mg l^-1 of Co(II). The stoichiometric composition of the chelate is 1:1 (Co(II):BBSOPD). A large excess of over 50 cations, anions and complexing agents do not interfere in the determination. The method was successfully used for the determination of cobalt in several standard reference materials (steels and alloys), environmental waters (potable and polluted), biological samples (human blood and urine), pharmaceutical and soil samples and solutions containing both cobalt(II) and cobalt(III) as well as some complex synthetic mixtures. The method has high precision and accuracy.     

Liquid chromatographic determination of chelates of cobalt (II), copper (II) and iron (II) with 2-thiophonaldehyde-4-phenyl-3-thiosemicarbazone

Summary A new chelating reagent 2-thiophenaldehyde-4-phenyl-3-thiosemicarbazone (TAPT) has been examined for high performance liquid chromatographic (HPLC) separations of cobalt (II), copper(II) and iron (II) or cobalt (II), nickel (II), iron (II), copper (II) and mercury (II) as metal chelates on a C₁₈, 5μm column (250×4 mm i.d.) The chelates were eluted isocratically with methanol: acetonitrile: water containing sodium acetate and tetrabutylammonium bromide (TBA), and detected at 254 nm. A solvent extraction procedure was developed for simultaneous determination of the metals with detection limits within 0.02–2.5 μ g.mL⁻¹. The method was applied to the determination of copper, cobalt and iron in natural waters.     

Solid-phase extraction and atomic absorption spectrometric determination of cobalt using an octadecyl bonded silica membrane disk modified with Cyanex 272

A simple SPE method for determination of cobalt(II) using a C18 bonded silica membrane disk impregnated with Cyanex 272 has been developed. Cobalt(II) was quantitatively sorbed at pH 6.0 from a sample solution and eluted using 10.0 mL 1.0 M HNO3 prior to its flame atomic absorption spectrometric determination. The influence of eluting agents, the minimum volume and maximum flow rate of the eluent, and interfering ions on cobalt(II) was studied. The method developed for cobalt(II) had an LOD of 1.4 microg/L, and a preconcentration factor > 200 with an RSD of 0.6%. The reusability of the modified disk was for 40 cycles. The method was applied for the determination of cobalt in certified samples, urine, and industrial sludge samples.     

Synthesis of New Reagent 2,6‐Diacetylpyridine Bis‐4‐Phenyl‐3‐Thiosemicarbazone (2,6‐DAPBPTSC): Selective,Sensitive and Extractive Spectrophotometric Determination of Co(II) in Vegetable,Soil, Pharmaceutical and Alloy Samples

New synthesized reagent 2,6‐diacetylpyridine bis‐4‐phenyl‐3‐thiosemicarbazone (2,6‐DAPBPTSC) is proposed as a sensitive and selective analytical reagent for the extractive spectrophotometric determination of cobalt(II). Cobalt(II) forms a reddish brown colored complex with 2,6‐DAPBPTSC, which is extracted into isoamylalcohol, under optimum conditions. The maximum absorption of the isoamylalcohol extract is measured at 400 nm. Beer's law is applied in the range 0.6‐6.0 ppm of cobalt(II). The molar absorptivity and Sandell's sensitivity of the complex is calculated as 2.2 × 10⁴ L mol^?1 cm^?1 and 2.68 × 10^?3 μg cm^?2, respectively. An adequate linearity with a correlation coefficient value of 0.969 is obtained for the Co(II)‐2,6‐DAPBPTSC complex. The instability constant of the complex, calculated from Asmus' method is 3.75 × 10^?4 The precision and accuracy of the method is checked with calculation of relative standard deviation (n = 5), 0.388 and the detection limit a value is 0.0028 μg mL^?1. The method is successfully employed for the determination of cobalt(II) in real samples, such as vegetables, soil, water samples, standard alloy samples, and the performance of the present method was evaluated in terms of Student ‘t’ test and Variance ‘f’ test, which indicates the significance of the present method is an inter comparison of the experimental values, using atomic absorption spectrometer (AAS).