A Sensitive Method for the Determination of Methadone in Biological Samples Using Nano-Structured α-Carboxy Polypyrrol as a Sorbent of SPME

Nano-structured α-carboxy polypyrrol (PPy- α-COOH) was used as a coating of solid-phase microextraction (SPME) fiber to increase the extraction efficiency of headspace solid phase microextraction (HS-SPME) of methadone (MDN) in biological samples. The carboxy-endcapped polypyrrole film was prepared via electrochemical deposition on a platinum wire. A nano-fibrous structure of PPy-α-COOH with a diameter of 120 nm was obtained. The porous surface structure of the film, revealed by scanning electron microscopy, provided high surface areas and allowed for high extraction efficiency of methadone. Then the analysis of the extracts was carried out by a gas chromatography-flame ionization detector. In order to achieve maximum extraction efficiency, different parameters affecting the extraction conditions were optimized. Under the optimized conditions, the limit of detections and the limit of quantifications of the method in the range of 0.02–0.035 and 0.06–0.10 μg L⁻¹ were obtained for different matrices. The relative recoveries in different samples were in the range of 95–97%. Finally, the feasibility of the proposed method was successfully confirmed by extraction and determination of MDN in human urine and plasma samples in the range of microgram per liter, and suitable results were obtained (RSDs <5.3%).

     

Development and Validation of a RP-HPLC–PDA Method for Determination of Curcuminoids in Microemulsions

A sensitive, specific and rapid high-performance liquid chromatography method was developed in an effort to quantify extremely low curcuminoid levels for the future transdermal experiments where the curcuminoids are incorporated with excipients such as microemulsion, liposomes, and micelles. The chromatographic separation was performed using a Symmetry^® C₁₈, 250 × 4.6 mm, 5-μm column, with a mobile phase composed of 5 mM acetonitrile:phosphoric acid (45:55, v/v) at a flow rate of 1.0 mL min⁻¹, it was sensitive with a low limit of quantitation for curcuminoids (0.626 ng mL⁻¹ for curcumin) and good linearity (r ² ≥ 0.999) over the range 1–100 ng mL⁻¹. All the validation data, such as accuracy and precision, were within the required limits from the ICH guideline. The assay method was successfully applied during forced degradation of curcuminoid solutions. The method retained its accuracy and precision when the standard addition technique was applied.

     

Development and Validation of a RP-HPLC–PDA Method for Determination of Curcuminoids in Microemulsions

A sensitive, specific and rapid high-performance liquid chromatography method was developed in an effort to quantify extremely low curcuminoid levels for the future transdermal experiments where the curcuminoids are incorporated with excipients such as microemulsion, liposomes, and micelles. The chromatographic separation was performed using a Symmetry^® C₁₈, 250 × 4.6 mm, 5-μm column, with a mobile phase composed of 5 mM acetonitrile:phosphoric acid (45:55, v/v) at a flow rate of 1.0 mL min^?1, it was sensitive with a low limit of quantitation for curcuminoids (0.626 ng mL^?1 for curcumin) and good linearity (r ² ≥ 0.999) over the range 1–100 ng mL^?1. All the validation data, such as accuracy and precision, were within the required limits from the ICH guideline. The assay method was successfully applied during forced degradation of curcuminoid solutions. The method retained its accuracy and precision when the standard addition technique was applied.     

Development and Validation of a HPLC Method for the Determination of Five Bioactive Compounds in the “Xuebijing” Injection

A reversed phase high performance liquid chromatographic (RP-HPLC) method with ultraviolet (UV) detector was developed for simultaneously determining five bioactive components (i.e., hydroxysafflor yellow A: HSYA; paeoniflorin, ferulic acid, benzoic acid, and danshensu) in “Xuebijing” (XBJ) injection, a widely used traditional Chinese medicine (TCM) for treating sepsis and multiple organ dysfunction syndrome. A Zorbox SB C₁₈ column was used with 0.2% phosphoric acid (V/V)-acetonitrile as the mobile phase under the condition of gradient elution. The five components were analyzed by using a timed wavelength measure according to their maximum absorption wavelength. The intraday and interday precisions of the five investigated compounds were less than 1.17% and the average recoveries ranged from 97.3% to 103.2%. There were good linear correlations between the concentrations of the five components and their chromatographic peak areas (R² ≥ 0.9998), the proposed method was successfully applied to determine the five components in different batches of XBJ injection products, the results indicated that the proposed method is simple, stable, and accurate and could be readily utilized as a quality control method for manufacturing process of XBJ injection.     

Development and Validation of a GC–MS Method for the Determination of Methyl and Ethyl Camphorsulfonates in Esomeprazole Magnesium

A rapid gas chromatography–mass spectrometry method for the identification and determination of two carcinogenic impurities viz. methyl camphorsulfonate (MCS) and ethyl camphorsulfonate (ECS) in esomeprazole magnesium (EOM) is developed for the first time. The factors affecting method development and the fragmentation patterns of MCS and ECS based on the mass spectral analysis are described. The limit of detection and limit of quantitation values for both compounds were established as 3 and 10 ppm, respectively with respect to 50 mg mL^?1 of EOM. The method is linear within the range of 10–120 ppm and found to be precise, accurate, specific and robust.     

Development and Validation of a Sensitive LC–Tandem-MS Method for the Quantitative Determination of Picroside II in Rat Plasma

A rapid and sensitive method for the quantitative determination of picroside II in rat plasma was developed and validated using liquid chromatographic separation with tandem mass spectrometric detection. The analytes of interest were extracted from rat plasma samples by ethyl acetate after acidification with 1.0% acetic acid solution. Chromatographic separation was achieved on a Hypersil GOLD column (50 × 2.1 mm I.D., 5 μm) using a mobile phase consisting of acetonitrile–0.1% formic acid solution (30:70, v/v) at a flow rate of 0.2 mL min^?1. Detection was performed on a triple quadrupole tandem mass spectrometer by selected reaction monitoring (SRM) mode via electrospray ionization (ESI). The calibration curve was linear in the concentration range of 1.00–400 ng mL^?1 in rat plasma, with a 1.00 ng mL^?1 lower limit of quantification (LLOQ). Satisfactory results were achieved for intraday repeatability [relative standard deviation (RSD) = 6.4–12.4%] and inter-day precision (RSD = 6.8–14.7%). The accuracy in terms of relative error ranged from ?2.1 to 10.0%. The extraction recoveries of picroside II and icariin (internal standard) were 80.0 and 89.3%, respectively. The developed method was successfully employed to determine picroside II plasma concentrations after oral administration to Wistar rats.     

Chemometric Resolution for Rapid Determination of Prometryn in Leek Samples Using GC–MS

Much effort has been made to analyze the pesticides in foods or vegetables due to the interferences in the sample matrix. In this work, taking the determination of prometryn in leek samples as an example, a simple method is proposed for fast analysis of the components in real samples using GC–MS and chemometric resolution. The purification step in preparing the samples was simplified, and a short capillary column and fast temperature program were employed in GC–MS measurement. Although the measured signal is composed of overlapped peaks with the interferences and background, the signal of prometryn can be extracted by chemometric resolution. Six leek samples from different markets were analyzed within an elution time of 6 min. Compared with the results by the standard method, the results by the proposed method were found to be reliable.

     

Chemometric Resolution for Rapid Determination of Prometryn in Leek Samples Using GC–MS

Much effort has been made to analyze the pesticides in foods or vegetables due to the interferences in the sample matrix. In this work, taking the determination of prometryn in leek samples as an example, a simple method is proposed for fast analysis of the components in real samples using GC–MS and chemometric resolution. The purification step in preparing the samples was simplified, and a short capillary column and fast temperature program were employed in GC–MS measurement. Although the measured signal is composed of overlapped peaks with the interferences and background, the signal of prometryn can be extracted by chemometric resolution. Six leek samples from different markets were analyzed within an elution time of 6 min. Compared with the results by the standard method, the results by the proposed method were found to be reliable.     

Development of a Solid‐Phase Extraction‐Enzyme‐Linked Immunosorbent Assay Method with a New Sorbent of Multiwall Carbon Nanotube for the Determination of Estrone in Water

Abstract

A sensitive solid‐phase extraction‐enzyme‐linked immunosorbent assay (SPE‐ELISA) method was developed to analyze the estrone in environmental water. A new SPE sorbent of the multiwall carbon nanotube was tested and proved to have similar adsorbability for estrone comparing to the commercial C₁₈ SPE. A specific polyclonal antibody for estrone (A‐E1) and a broad‐spectrum antibody for estrone, estradiol and estriol (A‐E2) were produced. For A‐E1, the limit detection of estrone was 0.04 µg/l and for A‐E2 were 0.07, 0.04 and 0.2 µg/l of estrone, estradiol and estriol, respectively. Different river water samples were analyzed by ELISA and HPLC method.     

New Method for the Synthesis of 5‐Hydroxycamptothecin Derivatives

Abstract

An efficient hydroxylation at the 5‐position of the C ring of camptothecins was accomplished with the complex of CuI and organic amines as catalyst in the presence of oxygen at room temperature in dimethyl formate (DMF). To be successfully hydroxylated, the insoluble camptothecin analogue was transformed to the corresponding 20 carbonates.     

Simple and New Method for the Synthesis of β-Acetamido Ketones on a Solid Surface

Diels–Alder reactions of 3-vinylindoles were carried out with methyl acrylate and N-phenylmaleimide as dienophiles under microwave conditions to furnish unreported tetrahydrocarbazoles regio- and stereoselectively in good yields. Further dehydrogenation resulted in new substituted carbazoles.     

Determination of Tetracycline in Bovine and Breast Milk Using a Graphite–Polyurethane Composite Electrode

A bare graphite–polyurethane composite electrode (60% graphite, m/m) was used for the determination of tetracycline in bovine and breast milk. Limits of detection as low as 2.6?µmol?L^?1 were obtained in pH 2.3 phosphate buffer using optimized differential pulse voltammetric parameters at the graphite–polyurethane composite electrode. The milk treatment consisted of acidification with 80% trichloroacetic acid, centrifugation to remove solid phase from milk, the isolation of the antibiotic from the whey using solid-phase extraction, and direct analysis in pH 2.3 phosphate buffer. Recoveries between 83 and 99% and 97% were obtained for tetracycline fortified in bovine and breast milk, suggesting that this approach is a promising screening procedure.     

A New Flow‐Injection Chemiluminescence Method for the Determination of Acyclovir and Gancyclovir

Abstract

A rapid and sensitive flow‐injection chemiluminescence (FI‐CL) method, which is based on the CL intensity that generated from the redox reaction of Ce(IV)‐rhodamine B in H₂SO₄ medium, for the determination of acyclovir and gancyclovir is described. For acyclovir, the determination range is 3×10^?8 g mL^?1–7×10^?5 g mL^?1, with 1.56×10^?8 g mL^?1 as its determination limit. During 11 repeated measurements for 1×10^?6 g mL^?1 acyclovir, the relative standard deviation was 2.08%. For gancyclovir, the determination range was 5×10^?8 g mL^?1–7×10^?5 g mL^?1, with 2.35×10^?8 g mL^?1 as its determination limit. The relative standard deviation is 2.83% with 11 repeated measurements of 1×10^?6 g mL^?1 gancyclovir. This method can be successfully used to determine the content of acyclovir and gancyclovir in injections, acyclovir in eye drops, and, maybe, also for other ciclovirs.     

Highly Sensitive Determination of Traces of Co(II) in Pharmaceutical and Urine Samples Using Kinetic–Spectrophotometric Method

Abstract

A high sensitive, accurate and simple kinetic method has been developed for determination of trace of Co(II) ions, based on its strongly catalytic effect in the reaction oxidation of disodium-6-hydroxy-5-[(4-sulfophenyl)azo]-2-naphtalenesulfonic acid (artificial color, Sunset Yellow FCF, E110 in text selected as SY) by hydrogen peroxide in borate buffer at pH of 9.5, by monitoring the rate of disappearance of SY. Reaction rate was monitored spectrophotometrically, at λ_max of the SY at 478.4 nm. The optimum operating conditions regarding reagents concentration and temperature were established. The tangent method was adopted for constructing the calibration curve, which was found to be linear over the concentration range 1.18–17.67 ng ml^?1 and 17.67–58.90 ng ml^?1 of Co(II). The limit of detection (3σ) is 0.15 ng ml^?1, and limit of quantification (10σ) is 0.5 ng ml^?1. The effects of the other ions on the reaction rate were determined for an assessment of the selectivity of the method. The developed kinetic procedure was successfully applied for the determination of Co(II) in pharmaceutical and urine samples. The unique features of this procedure are that the determination can be performed at room temperature, and the analysis time is short. The newly developed method is high sensitive, simple, inexpensive and efficient for use in the analysis of a large number of samples.     

Development and Validation of a Chiral Liquid Chromatographic Method for Quantitative Determination of (+)-OTX015 in (−)-OTX015

A simple, rapid and robust enantioselective method was developed and validated for the quantitation of OTX015 enantiomers [(−)-OTX015 and (+)-OTX015] with ultrahigh-performance liquid chromatography (UHPLC) as per ICH guidelines. The active [(−)-OTX015] and inactive [(+)-OTX015] enantiomers were resolved on a Chiralpak-IA column using methanol consisting of 0.1 % diethyl amine at a flow rate of 1.0 mL min⁻¹. The resolution between the enantiomers was found to be more than 3.7 in the optimized method. The developed method was extensively validated and proven to be robust. The calibration curve for (+)-OTX015 showed excellent linearity over the concentration range of 10–100 µg mL⁻¹. The limit of detection and the limit on quantitation for (+)-OTX015 were 5 and 10 µg mL⁻¹, respectively. The recovery for (+)-OTX015 ranged between 100.7 and 102.5 % in the bulk drug sample of (−)-OTX015. The proposed method was found to be suitable and accurate for quantitative determination of (+)-OTX015 in bulk drug.

     

Anticipation on the Development of Polycarbonate Production Technology by Using Ester-interchange Method in China

Polycarbonate (hereinafter referred to as “ PC ”) is the sole product having good transparency among the 5 major engineering plastics. In 2000, the worldwide PC production capacity was reached up to 2,800,000 tons of several hundreds of brands of various grades. It is estimated that the global PC production capacity will exceed 3,500,000 tons in 2005. The global demand for PC was 1,900,000 tons in 2000, which will reach to 2,600,000 tons and more than 3,000,000 tons in 2003 and 2005 respe…     

Multiwalled Carbon Nanotubes β-Cyclodextrin Modified Electrode for Electrochemical Determination of Bisphenol S in Water Samples

Russian Journal of Electrochemistry - A voltammetric sensor for the determination of bisphenol S (BPS) in aqueous samples was fabricated by immobilization of β-cyclodextrin/multiwalled carbon...