A highly regioselective synthesis of 1‐n‐methyl‐spiro‐[2,3′“]‐oxindole‐spiro‐[3,2”]indane‐1“, 3”‐dione‐4‐arylpyrrolidines through 1,3‐dipolar cycloaddition protocol

2‐Arylidene‐1,3‐indanediones undergo a regioselective 1,3‐dipolar cycloaddition reaction with the azomethine ylide derived from isatin and sarcosine by decarboxylative route affording a series of 1‐N‐methyl — spiro[2.3′“]oxindole‐spiro[3.2”]indane‐1“,3”‐diones‐4‐aryl pyrrolidines. The structures were established by spectroscopic techniques as well as single crystal X‐ray analysis. Density functional theory at B3L YP/6‐31G^* and the semi empirical AM₁ calculations were employed to rationalize the observed results. The experimental regioselectivity of 1,3‐dipolar cycloadditions could be corroborated nicely with the computed Fukui frontier orbital energies and reaction energies.     

具有U构型的二{1-甲硫基-1-[1-苯基-1-(1-苯基-3-甲基-5-氧代-4,5二氢吡唑-4-烯)-甲氨基]亚氨甲基}二硫醚的晶体结构

The reaction of 1-phenyl-3-methyl-4-benzoyl-2,5-dihydro-1H-pyrazol-5-one (PMBP) and methyldithiocarbazate (mdtc) in methanol results in formation of a yellow crystalline solid, adduct of 1-phenyl-3-methyl-4benzoyl-2,5-dihydro-lH-pyrazol-5-one and methyldithiocarbazate. When the yellow solids were dissolved in a mixture of methanol and ether (1:4), a red crystal, which is an oxidation product of the former, was obtained by allowing solvent to evaporate for a few days at room temperature. The X-ray analysis of the red crystal indicates that it is a novel disulfide with a special structure like a “U” conformation in the solid state.     

Kristallstrukturen und spektroskopische Eigenschaften von 2λ3‐Phospha‐1, 3‐dionaten und 1, 3‐Dionaten des Calciums ‐ ein Vergleich am Beispiel der 1, 3‐Diphenyl‐ und 1, 3‐Di(tert‐butyl)‐Derivate

Crystal Structures and Spectroscopic Properties of 2λ³‐Phospha‐1, 3‐dionates and 1, 3‐Dionates of Calcium ‐ Comparative Studies on the 1, 3‐Diphenyl and 1, 3‐Di(tert‐butyl) Derivatives A hydrogen‐metal exchange between dibenzoylphosphane and calcium carbide in tetrahydrofuran (THF) followed by addition of the ligand 1, 3, 5‐trimethyl‐1, 3, 5‐triazinane (TMTA) furnishes the binuclear complex bis[(tmta‐N, N′, N″)calcium bis(dibenzoylphosphanide)] ( 1a ) co‐crystallizing with benzene. Similarly, reaction of bis(2, 2‐dimethylpropionyl)phosphane with bis(thf‐O)calcium bis[bis(trimethylsilyl)amide] in 1, 2‐dimethoxyethane (DME) gives bis(dme‐O, O′)calcium bis[bis(2, 2‐dimethylpropionyl)phosphanide] ( 1b ) in high yield. The carbon analogues 1, 3‐diphenylpropane‐1, 3‐dione (dibenzoylmethane) or 2, 2, 6, 6‐tetramethylheptane‐3, 5‐dione (dipivaloylmethane) and bis(thf‐O)calcium bis[tris(trimethylsilylmethyl)zincate] in DME afford bis(dme‐O, O′)calcium bis(dibenzoylmethanide) ( 2a ) and the binuclear complex (μ‐dme‐O, O′)bis[(dme‐O, O′)calcium bis(dipivaloylmethanide)] ( 2b ), respectively. Dialkylzinc formed during the metalation reaction shows no reactivity towards the 1, 3‐dionates 2a and 2b . Finally, from the reaction of the unsymmetrically substituted ligand 2‐(methoxycarbonyl)cyclopentanone and bis(thf‐O)calcium bis[bis(trimethylsilyl)amide] in toluene, the trinuclear complex 3 is obtained, co‐crystallizing with THF. The β‐ketoester anion bridges solely via the cyclopentanone unit.     

Reply to “Comment on Aromatic‐Backbone Interactions in Model α‐Helical Peptides”

In response to Van Mourik's comments on our paper (J Comput Chem 2007, 28, 1208.) we present an extended version of our rotation method. We also prove that intramolecular interaction energies as well the basis set superposition errors calculated with our rotation method are comparable with those obtained by the counterpoise method of Boys and Bernardi (Mol Phys 1970, 19, 533). In intramolecular interaction energy calculations, if the interacting groups are in proximity, our rotation method is recommended to avoid artificial interactions, which can be induced by fragmentation. © 2007 Wiley Periodicals, Inc.J Comput Chem, 2008     

Synthesis of meso‐Pyrrole‐Substituted 22‐Oxacorroles by a “3+2” Approach

Unsymmetrical 22‐oxacorrole containing two aryl groups and one pyrrole group at the meso position was synthesized by condensing one equivalent of 16‐oxatripyrrane with one equivalent of meso aryl dipyromethane under mild acid‐catalyzed conditions followed by oxidation with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ). This [3+2] condensation approach was expected to yield meso‐free 25‐oxasmaragdyrin but unexpectedly afforded unsymmetrical meso‐pyrrole‐substituted 22‐oxacorrole. We demonstrated the versatility of the reaction by synthesizing four new meso‐pyrrole‐substituted 22‐oxacorroles. The reactivity of α‐position of meso‐pyrrole was tested by carrying out various functionalization reactions such as bromination, formylation, and nitration and obtained the functionalized meso‐pyrrole‐substituted 22‐oxacorroles in decent yields. The X‐ray structure obtained for one of the functionalized meso‐pyrrole substituted 22‐oxacorrole revealed that the macrocycle was nearly planar and the meso‐pyrrole was in the perpendicular orientation with respect to the macrocyclic plane. The meso‐pyrrole‐substituted 22‐oxacorroles absorb strongly in 400–700 nm region with one strong Soret band and four weak Q bands. The 22‐oxacorroles are strongly fluorescent and showed emission maxima at ≈650 nm with decent quantum yields and singlet‐state lifetimes. The 22‐oxacorroles are redox‐active and exhibited three irreversible oxidations and one or two reversible reduction(s). A preliminary biological study indicated that meso‐pyrrole corroles are biocompatible.     

Heat‐Induced Supramolecular Organogels Composed of α‐Cyclodextrin and “Jellyfish‐Like” β‐Cyclodextrin–Poly(ε‐caprolactone)

In general, the complexation and gelation behavior between biocompatible poly(ε‐caprolactone) (PCL) derivatives and α‐cyclodextrin (α‐CD) is extensively studied in water, but not in organic solvents. In this article, the complexation and gelation behavior between α‐CD and multi‐arm polymer β‐cyclodextrin‐PCL (β‐CD‐PCL) with a unique “jellyfish‐like” structure are thoroughly investigated in organic solvent N,N‐dimethylformamide and a new heat‐induced organogel is obtained. However, PCL linear polymers cannot form organogels under the same condition. The complexation is characterized by rheological measurements, DSC, XRD, and SEM. The SEM images reveal that the complexes between β‐CD‐PCL and α‐CD present a novel topological helix porous structure which is distinctly different from the lamellar structure formed by PCL linear polymers and α‐CD, suggesting the unique “jellyfish‐like” structure of β‐CD‐PCL is crucial for the formation of the organogels. This research may provide insight into constructing new supramolecular organogels and potential for designing new functional biomaterials. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1598–1606     

Metalated 1, 3‐Azaphospholes: η1‐(1H‐1, 3‐Benzazaphosphole‐P)M(CO)5 and μ2‐[(1, 3‐Benzazaphospholide‐P)(cyclopentadienide)nickel] Complexes

1H‐1, 3‐Benzazaphospholes react with M(CO)₅(THF) (M = Cr, Mo, W) to give thermally and relatively air stable η¹‐(1H‐1, 3‐Benzazaphosphole‐P)M(CO)₅ complexes. The ¹H‐ and ¹³C‐NMR‐data are in accordance with the preservation of the phosphaaromatic π‐system of the ligand. The strong upfield ³¹P coordination shift, particularly of the Mo and W complexes, forms a contrast to the downfield‐shifts of phosphine‐M(CO)₅ complexes and classifies benzazaphospholes as weak donor but efficient acceptor ligands. Nickelocene reacts as organometallic species with metalation of the NH‐function. The resulting ambident 1, 3‐benzazaphospholide anions prefer a μ₂‐coordination of the η⁵‐CpNi‐fragment at phosphorus to coordination at nitrogen or a η³‐heteroallyl‐η⁵‐CpNi‐semisandwich structure. This is shown by characteristic NMR data and the crystal structure analysis of a η⁵‐CpNi‐benzazaphospholide. The latter is a P‐bridging dimer with a planar Ni₂P₂ ring and trans‐configuration of the two planar heterocyclic phosphido ligands arranged perpendicular to the four‐membered ring.     

Preparation of “Si‐Centered” Chiral Silanes by Direct α‐Lithiation of Methylsilanes

The direct α‐lithiation of methyl‐substituted silanes as an efficient method for the preparation and elaboration of Si‐chiral compounds is reported. Deprotonation of chiral oligosilanes occurs selectively and with high yields at the methyl group of the stereogenic silicon center, even in the presence of multiple methylsilyl or methylgermyl substituents. Computational studies have confirmed this preference as a consequence of pre‐coordination of the lithiating agent by the amino side‐arm and repulsion effects in the corresponding transition state. This complexation is also obvious from X‐ray structure analyses of the α‐lithiated silanes, which exhibit intriguing structure formation patterns differing in the type of aggregation and the amount of alkyllithium used. An alternative route to Si‐chiral compounds is also presented, which involves desymmetrization of dimethylsilanes mediated by a chiral side‐arm. Structure analyses and computational studies have shown that the diastereoselectivity of this α‐lithiation is influenced by the selectivity of the formation of the stereogenic nitrogen upon complexation of the alkyllithium.     

Reaktionen von 1,1,3,3‐Tetrakis(dimethylamino)‐1 λ5, 3 λ5‐diphosphet mit 5‐Cyano‐1‐pentin und mit 2‐(Cyanmethyl)‐1‐methylpyrrol

Diphosphabenzenes. VII. Reactions of 1,1,3,3‐Tetrakis(dimethylamino)‐1 λ⁵, 3 λ⁵‐diphosphete with 5‐Cyano‐1‐pentine and 2‐(Cyanomethyl)‐1‐methylpyrrol 5‐Cyano‐1‐pentine reacts with the equimolar amount of the λ⁵‐diphosphete 1 to give the λ⁵‐diphosphinine (λ⁵‐diphosphabenzene) ( 3 ), while reaction with the double equimolar amount of 1 yields the λ⁵‐diphosphinine ( 4 ). The acyclic compount 6 is the main product of the reaction between 1 and 2‐(cyanomethyl)‐1‐methylpyrrol, 5 . Melting points of 4 · CH₃CN and 6 , and mass, nmr and ir spectra of 3 , 4 , and 6 are reported. The crystal structure of 4 · CH₃CN shows an open‐chain ylidic CPCP‐sequence, which is linked to a λ⁵‐diphosphinine via an ethylene bridge. The X‐ray structure analysis of 6 confirms the existence as an acyclic conjugated double ylid.     

The Chemistry of Tetrafluoroallene： One－pot Synthesis of Trifluoromethylindolizines from 1,3－Diiodo－1,1,3,3－tetrafluoropropane by 1,3－Dipolar Cycloaddition

Heating a mixture of 1, 3-diiodo-1, 1, 3, 3-tetrafluoropropane (2), K2CO3, pyridinium bromides (3) in CH3CN at 65℃ for 10 h gives the corresponding trifluoromethylindolizines.     

A “One Pot,” Environmentally Friendly,Multicomponent Synthesis of 2‐Amino‐5‐cyano‐4‐[(2‐aryl)‐1H‐indol‐3‐yl]‐6‐hydroxypyrimidines and Their Antimicrobial Activity

A series of multifunctional 2‐amino‐5‐cyano‐4‐[(2‐aryl)‐1H‐indol‐3‐yl]‐6‐hydroxypyrimidines ( 4a , 4b , 4c , 4d , 4e , 4f ) was synthesized by multicomponent reaction of 3‐formylindole ( 1 ), cyanoethylacetate ( 2 ), and guanidine hydrochloride ( 3 ) with NaOH by using green chemical techniques, viz. microwave irradiation and grindstone technology. The same reactants when refluxed in ethanol also gave titled compounds ( 4a , 4b , 4c , 4d , 4e , 4f ). Compared with conventional procedure, the reaction can be carried out under milder conditions, requiring a shorter reaction time and giving higher yields following the green chemistry methodology. All the synthesized compounds have been characterized on the basis of elemental analyses and spectral data (IR, ¹H NMR, ¹³C NMR, and mass). All synthesized compounds were also evaluated for their antimicrobial activity against nine pathogenic bacteria, antifungal activity against Rhizopus stolonifer, Aspergillus flavus, and Fusarium oxysporum and antibacterial activity against Escherichia coli and Pseudomonas aeruginosa at different concentrations. Most of the compounds showed mild to moderate activity.     

Crystal structures of the “two” 4‐aminofurazan‐3‐carboxylic acids

The crystal structures of the two compounds reported to be 4‐aminofurazan‐3‐carboxylic acid have been determined. The compound reported by Sheremetev et al. (J Heterocycl Chem 2005, 42, 519) is the actual 4‐aminofurazan‐3‐carboxylic acid. The compound reported by Meyer (Org Prep Proced Int 2004, 36, 361) is the interesting complex formed from a molecule of the acid and a molecule of the potassium salt of the acid. J. Heterocyclic Chem., (2012).     

“Twin” phosphorous atoms of tetraethyl 2‐methyl‐piperyd‐1‐ylmethylenebisphosphonates

Recently, bisaminophosphonates found applications as therapeutic agents for curing bone disorders. When trying to relate the structures of substituted piperid‐1‐ylmethylenebisphosphonic with their biological properties, non‐typical findings that in ³¹P NMR spectra of 2‐methyl‐piperid‐1‐ylmethylenebisphosphonic and 2‐ethyl‐piperid‐1‐ylmethylenebisphosphonic acids, two separate singlets from each of the phosphonic groups were observed, while their analogues bearing substituent in position 3 exhibit only one signal. Their presence was explained by freezing of the molecular motions by strong hydrogen bonding between NH and P = O atoms. In this work, synthesis as well as spectroscopic and theoretical investigations of the tetraethyl esters of 2‐methyl‐piperid‐1‐ylmethylenebisphosphonic in its racemic and enatiomerically pure forms are reported. Their ³¹P NMR spectra revealed two sets of dublets, which indicate the presence of two non‐equivalent phosphorous atoms. More detailed NMR and theoretical studies indicated that the nonequivalent phosphorous signals in ³¹P NMR spectra may results from the absence of C₂ symmetry of the molecule along with the presence of large ester groups blocking the internal molecular motion around C—N bond, and thus blocking the interchange of ring conformation. © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:774–781, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20349     

Poly[(μ4‐adamantane‐1,3‐dicarboxylato‐κ5O1:O1′:O3,O3′:O3′)(μ3‐adamantane‐1,3‐dicarboxylato‐κ5O1,O1′:O3,O3′:O3′)dimagnesium]: a layered coordination polymer

The title compound, [Mg₂(C₁₂H₁₄O₄)₂]_n, is the first example of an s‐block metal adamantanedicarboxylate coordination polymer. The asymmetric unit comprises two crystallographically unique Mg^II centers and two adamantane‐1,3‐dicarboxylate ligands. The compound is constructed from a combination of chains of corner‐sharing magnesium‐centered polyhedra, parallel to the a axis, connected by organic linkers to form a layered polymer. The two Mg^II centers are present in distorted tetrahedral and octahedral coordination environments derived from carboxylate O atoms. Tetrahedrally coordinated Mg^II centers have been reported in organometallic compounds, but this is the first time that such coordination has been observed in a magnesium‐based coordination polymer. The bond valance sums of the two Mg^II centers are 2.05 and 2.11 valence units, matching well with the expected value of 2.