Trans‐3,5‐dihydroperoxy‐3,5‐dimethyl‐1,2‐dioxalane/HBr System as New,Effective, Mild and Non‐toxic Reagent for Synthesis of 2‐Aryl‐1H‐benzothiazoles and 2‐Aryl‐1‐arylmethyl‐1H‐benzimidazoles

Ttrans‐3,5‐dihydroperoxy‐3,5‐dimethyl‐1,2‐dioxalane has been used as new, effective, solid, inexpensive and nontoxic oxidant for in situ generation of Br⁺ from HBr. This system has been applied as catalyst for synthesis of 2‐aryl‐1H‐benzothiazoles and 2‐aryl‐1‐arylmethyl‐1H‐benzimidazoles at room temperature in excellent yields and high purity.     

Syntheses,antitumor activities,and antiangiogenesis of exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidoethanoyl‐ 5‐fluorouracil and its polymers

A new monomer, exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidoethanoyl‐5‐fluorouracil (ETFU), was synthesized by the reaction of exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidoethanoyl chloride (ETPC) and 5‐fluorouracil (5‐FU). The homopolymer of ETFU and its copolymers with acrylic acid (AA) and vinyl acetate (VAc) were prepared via photopolymerizations with 2,2‐dimethoxy‐2‐phenylacetophenone at 25 °C for 48 h. The structures of the synthesized monomer and polymers were identified by Fourier transform infrared, ¹H NMR, and ¹³C NMR spectroscopy and elemental analysis. The ETFU contents in poly(ETFU‐co‐AA) and poly(ETFU‐co‐VAc) were 26 mol % and 26 mol %, respectively. The number‐average molecular weights of the polymers, as determined by gel permeation chromatography, ranged from 5600 to 17,000. The in vitro cytotoxicities of 5‐FU and the synthesized samples against mouse mammary carcinoma and human histiocytic lymphoma cancer cell lines increased in the following order: ETFU > 5‐FU > poly(ETFU‐co‐AA) > poly(ETFU) > poly(ETFU‐co‐VAc). The in vivo antitumor activities of the polymers against Balb/C mice bearing the sarcoma 180 tumor cells were greater than those of 5‐FU at all doses tested. The inhibitions of the samples for SV40 DNA replication and antiangiogenesis were much greater than the inhibition of the control. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4272–4281, 2000     

Synthesis of 2‐Thioxohydropyridine‐3‐Carbonitrile, 2‐Alkylthiopyridine,Thienopyridine, Pyrazolopyridine Derivatives and Their Theoretical Calculations

Cyanothioacetamide ( 1 ) reacted with but‐2‐enal ( 2 ) to give the corresponding 4‐methyl‐2‐sulfanylpyridine‐3‐carbonitrile ( 7 ) which was used as a good starting material for the synthesis of 1‐(3‐amino‐4‐methylthieno[2,3‐b]pyridin‐2‐yl)ethan‐1‐one ( 10 ), 3‐amino‐4‐methylthieno[2,3‐b]pyridine‐2‐carboxamide ( 15 ), 3‐amino‐4‐methylthieno[2,3‐b]pyridine‐2‐carboxylate ( 18 ) and 3‐amino‐4‐methylthieno[2,3‐b]pyridin‐2‐ylarylketone 25a‐c through its reactions with each of (1‐chloroacetone ( 8 ), 3‐chloropentane‐2,4‐dione ( 11 ) or ethyl 2‐chloro‐3‐oxo‐butanoate ( 19 )), 2‐chloroacetamide ( 13 ), ethyl 2‐chloroacetate ( 16 ) and 2‐bromo‐1‐arylethan‐ 1 ‐one 23a‐c , respectively. Considering the data of elemental analyses, IR, ¹HNMR, mass spectra and theoretical calculations, structures of the newly synthesized heterocyclic compounds were elucidated.     

Isocyanide‐Based Three‐Component Synthesis of Highly Substituted 1,6‐Dihydro‐6,6‐dimethylpyrazine‐2,3‐dicarbonitrile, 3,4‐Dihydrobenzo[g]quinoxalin‐2‐amine,and 3,4‐Dihydro‐3,3‐dimethyl‐quinoxalin‐2‐amine Derivatives

A novel and efficient isocyanide‐based multicomponent reaction between alkyl or aryl isocyanides 1 , 2,3‐diaminomaleonitrile ( 2 ), naphthalene‐2,3‐diamines ( 6 ) or benzene‐1,2‐diamine ( 9 ), and 3‐oxopentanedioic acid ( 3 ) or Meldrum's acid ( 4 ) or ketones 7 was developed for the ecologic synthesis, at room temperature under mild conditions, of 1,6‐dihydropyrazine‐2,3‐dicarbonitriles 5a – 5f in H₂O without using any catalyst, and of 3,4‐dihydrobenzo[g]quinoxalin‐2‐amine and 3,4‐dihydro‐3,3‐dimethyl‐quinoxalin‐2‐amine derivatives 8a – 8g and 10a – 10e , respectively, in the presence of a catalytic amount of p‐toluenesulfonic acid (TsOH) in EtOH, in good to excellent yields (Scheme 1).     

A Novel Conversion of 2, 4‐Diaryl‐2, 3‐dihydro‐1 H‐1, 5‐benzodiazepines into 2, 4‐Diaryl‐3 H‐1, 5‐benzodiazepines

A novel conversion of 2, 4‐diaryl‐2, 3‐dihydro‐1 H‐1, 5‐benzodiazepins into 2, 4‐diaryl‐3 H‐1, 5‐benzodiazepines by the reaction with m‐chloroperbenzoic acid (MCPBA) was reported.     

Preparation,Structural Characterization,and Antifungal Activities of Complexes of Group 12 Metals with 2‐Acetylpyridine‐ and 2‐Acetylpyridine‐N‐oxide‐4N‐phenylthiosemicarbazones

Reaction of group 12 metal dihalides in ethanolic media with 2‐acetylpyridine ⁴N‐phenylthiosemicarbazone ( H4PL ) and 2‐acetylpyridine‐N‐oxide ⁴N‐phenylthiosemicarbazone ( H4PLO ) afforded the compounds [M(H4PL)X₂] (X = Cl, Br, M = Zn, Cd, Hg; X = I, M = Zn, Cd) ( 1–8 ), [Hg(4PL)I]₂ ( 9 ) and [M(H4PLO)X₂] (X = Cl, Br, I, M = Zn, Cd, Hg) ( 10–18 ). H4PL , H4PLO and their complexes were characterized by elemental analysis and by IR and ¹H and ¹³C NMR spectroscopy (and the cadmium complexes by ¹¹³Cd NMR spectroscopy), and H4PL , H4PLO , ( 5 · DMSO) and ( 9 ) were additionally studied by X‐ray diffraction. H4PL is N,N,S‐tridentate in all its complexes, including 9 , in which it is deprotonated, and H4PLO is in all cases O,N,S‐tridentate. In all the complexes, the metal atoms are pentacoordinate and the coordination polyhedra are redistorted tetragonal pyramids. In assays of antifungal activity against Aspergillus niger and Paecilomyces variotii, the only compound to show any activity was [Hg(H4PLO)I₂] ( 18 ).     

Simple,Efficient, and Catalyst‐Free Synthesis of (2‐Amino‐4H‐1‐benzopyran‐4‐yl)phosphonates in Polyethylene Glycol

Several (2‐amino‐4H‐1‐benzopyran‐4‐yl)phosphonates were efficiently synthesized by employing a multicomponent protocol involving a salicylaldehyde, malononitrile or ethyl cyanoacetate, and a trialkyl phosphite in polyethylene glycol. The latter could be recovered and re‐used. No additional solvent or catalyst was required. To the best of our knowledge, this is the first report of the one‐pot preparation of (2‐amino‐4H‐1‐benzopyran‐4‐yl)phosphonic acid dimethyl esters.     

Synthesis,solid‐state,and charge‐transport properties of conjugated polythiophene‐S,S‐dioxides

An alkylated semiconducting polymer comprising alternating bithiophene‐[all]‐S,S‐dioxide and aromatic monothiophene units in the polymer backbone was synthesized with the intent of modifying the energy gap and lowest unoccupied molecular orbital for use as a stable n‐type semiconductor. Films spun from this semiconducting polymer were characterized utilizing X‐ray scattering, near edge X‐ray absorption fine structure spectroscopy, ultraviolet photoelectron spectroscopy, and thin‐film field effect transistors to determine how oxidation of the thiophene ring systems impacts the structural and electronic properties of the polymer. The thiophene‐S,S‐dioxide polymers have lower optical and electrical band gaps than corresponding thiophene polymers. X‐ray scattering results indicate that the polymers are well ordered with the π–π stacking distances increased by 0.4 Å relative to analogous thiophene polymers. The electrical stability of these polymers is poor in transistors with a drop in the field effect mobility by approximately one order of magnitude upon addition of just 5% of the thiophene‐S,S‐dioxide unit in a copolymer with thiophene. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Synthesis,Characterization and Crystal Structure of Some Novel 1‐Aryl‐2‐Thioxo‐2,3‐Dihydro‐1H‐Quinazolin‐4‐Ones

The base catalyzed intramolecular nucleophilic cyclization of 1‐(2‐haloaroyl)‐3‐aryl thioureas ( 1a‐i ), in the presence of DMF afforded the 1‐aryl‐2‐thioxo‐2,3‐dihydro‐1H‐quinazolin‐4‐ones ( 2a‐i ). The structures were confirmed by spectroscopic data, elemental analyses and in case of the 2c by single crystal X‐ray diffraction data. The mechanistic studies support an intramolecular nucleophilic substitution (S_NAr mechanism) rather than intramolecular aromatic substitution (S_RN1 mechanism).     

Synthesis and Crystal Structure of 3,3,6,6‐Tetramethylmorpholine‐2,5‐dione,and Its 5‐Monothioxo and 2,5‐Dithioxo Derivatives

The synthesis of 3,3‐dimethylmorpholine‐2,5‐diones 4a was achieved conveniently via the ‘direct amide cyclization’ of the linear precursors of type 3 , which were prepared by coupling of 2,2‐dimethyl‐2H‐azirin‐3‐amines 2 with 2‐hydroxyalkanoic acids 1 . Thionation of 4a with Lawesson's reagent yielded the corresponding 5‐thioxomorpholin‐2‐ones 10 and morpholine‐2,5‐dithiones 11 , respectively, depending on the reaction conditions. The structures of 3aa, 4aa, 10a , and 11a were established by X‐ray crystallography. All attempts to prepare S‐containing morpholine‐2,5‐dione analogs or thiomorpholine‐2,5‐diones by cyclization of corresponding S‐containing precursors were unsuccessful and led to various other products. The structures of some of them have also been established by X‐ray crystallography.     

Three‐component One‐pot Synthetic Route to Functionalized N‐Phenyl‐ and N,N‐(1,4‐phenylene)‐2‐alkylimino‐2,3‐dihydrothiazoles under Mild,Solvent‐ and Catalyst‐free Conditions

A simple and efficient one‐pot synthesis of alkyl‐2‐(alkylimino)‐4‐methyl‐3‐phenyl‐2,3‐dihydrothiazole‐5‐carboxylate and dialkyl 3,3′‐(1,4‐phenylene)‐bis‐[2‐(alkylimino)‐4‐methyl‐2,3‐dihydrothiazole‐5‐carboxylate] derivatives from the reaction of phenylisothiocyanate (and also 1,4‐phenylene diisothiocyanate) and primary alkylamines in the presence of 2‐chloro‐1,3‐dicarbonyl compounds is described. This new protocol has several advantages such as lack of necessity of the catalyst and solvent, good yields,mild conditions and short times for reaction.     

Synthesis and Characterization of donor‐functionalized ansa‐Cyclopentadienyl‐Indenyl and ansa‐Indenyl‐Indenyl Complexes of Yttrium,Samarium, Thulium,and Lutetium

The stepwise reaction of Me₂SiCl₂ with K[C₅H₃ ^tBuMe‐3] or Li[C₉H₇] and then with K[C₉H₆CH₂CH₂‐ NMe₂‐1] followed by double deprotonation with NaH or LiBu, yields the two dimethylsilicon bridged cyclopentadienyl‐indenyl and indenyl‐indenyl donor‐functionalized ligand systems K₂[(C₅H₂ ^tBu‐3‐Me‐5)SiMe₂(1‐C₉H₅CH₂CH₂NMe₂‐3)] ( 1 ), and Li₂[(1‐C₉H₆)SiMe₂(1‐C₉H₅CH₂CH₂NMe₂‐3)] ( 2 ), respectively. Treatment of 1 with YCl₃(THF)₃, SmCl₃(THF)_1.77, TmI₃(DME)₃, and LuCl₃(THF)₃ gives the mixed ansa‐metallocenes [(C₅H₂ ^tBu‐3‐Me‐5)SiMe₂(1‐C₉H₅CH₂CH₂NMe₂‐3)]LnX (X = Cl, Ln = Y ( 3 ), Sm ( 4 ), Lu ( 5 ); X = I, Ln = Tm ( 6 )), respectively. The reaction of 2 with LuCl₃(THF)₃ yields [(1‐C₉H₆)SiMe₂(1‐C₉H₅CH₂CH₂NMe₂‐3)]LuCl ( 7 ). Compound 4 reacts with LiMe to give the corresponding alkyl derivative [(C₅H₂ ^tBu‐3‐Me‐5)SiMe₂(1‐C₉H₅CH₂CH₂NMe₂‐3)]Sm(CH₃) ( 8 ). The new complexes were characterized by elemental analyses, MS spectrometry, and NMR spectroscopy. The molecular structures of 5 and 6 were determined by single crystal X‐ray diffraction.     

Synthesis,Anticancer Evaluation,and Molecular Docking Studies of Novel (4‐Hydroxy‐2‐Thioxo‐3,4‐Dihydro‐2H‐[1,3]Thiazin‐6‐Yl)‐Chromen‐2‐Ones via a Multicomponent Approach

A series of coumarin‐substituted 1,3‐thiazine‐2‐thione derivatives ( 4a–m ) were synthesized via the multicomponent reaction of 3‐chloro‐3‐(2‐oxo‐2H‐chromen‐3‐yl)acrylaldehyde ( 1 ) carbon disulfide ( 2 ), and various primary amines ( 3 ), in presence of triethylamine and acetonitrile under stirring with good yields. The structures of all the synthesized compounds were characterized by analytical and spectral studies. Further, the synthesized compounds were screened for their in vitro antiproliferative activities against different cancer cell lines (A549, MDA‐MB‐231, MCF7, HeLa, and B16F10). Studies on the molecular interactions to recognize the hypothetical binding motif of the title compounds with the target Hsp 100 were carried out employing the Schrodinger software. Compounds 4a , 4c and 4m showed activity against all the five cell lines compared with the reference drug, and 4a exhibited the least IC₅₀ concentration of 7.56 ± 1.07 μg/mL against MCF7. This in vitro anticancer result was supported by in silico docking and in silico ADME (absorption, distribution, metabolism, and excretion) studies as well.     

Syntheses,Structures, and Electrochemical Properties of Two Bis‐triazole‐bis‐amide‐based Copper(II) Pyridine‐2,3‐dicarboxylate Coordination Polymers

Abstract. Two bis‐triazole‐bis‐amide‐based copper(II) pyridine‐2,3‐dicarboxylate coordination polymers (CPs), [Cu(2,3‐pydc)(dtb)_0.5(DMF)] · 2H₂O ( 1 ) and [Cu(2,3‐pydc)(dth)_0.5(DMF)] · 2H₂O ( 2 ) (2,3‐H₂pydc = pyridine‐2,3‐dicarboxylic acid, dtb = N,N′‐bis(4H‐1,2,4‐triazole)butanamide, and dth = N,N′‐bis(4H‐1,2,4‐triazole)hexanamide), were synthesized under solvothermal conditions. CPs 1 and 2 show similar two‐dimensional (2D) structures. In 1 , the 2,3‐pydc anions bridge the Cu^II ions into a one‐dimensional (1D) chain. Such 1D chains are linked by the dtb ligands to form a 2D layer. The adjacent 2D layers are extended into a three‐dimensional (3D) supramolecular architecture by hydrogen‐bonding interactions. The electrochemical properties of 1 and 2 were investigated.     

Synthesis,Spectroscopy, and Structures of Mono‐ and Dinuclear Copper(I) Halide Complexes with 1,3‐Imidazolidine‐2‐thiones

Copper(I) halides with triphenyl phosphine and imidaozlidine‐2‐thiones (L ‐NMe, L ‐NEt, and L ‐NPh) in acetonitrile/methanol (or dichloromethane) yielded copper(I) mixed‐ligand complexes: mononuclear, namely, [CuCl(κ¹‐S‐L ‐NMe)(PPh₃)₂] ( 1 ), [CuBr(κ¹‐S‐L ‐NMe)(PPh₃)₂] ( 2 ), [CuBr(κ¹‐S‐L ‐NEt)(PPh₃)₂] ( 5 ), [CuI(κ¹‐S‐L ‐NEt)(PPh₃)₂] ( 6 ), [CuCl(κ¹‐S‐L ‐NPh)(PPh₃)₂] ( 7 ), and [CuBr(κ¹‐S‐L ‐NPh)(PPh₃)₂] ( 8 ), and dinuclear, [Cu₂(κ¹‐I)₂(μ‐S‐L ‐NMe)₂(PPh₃)₂] ( 3 ) and [Cu₂(μ‐Cl)₂(κ¹‐S‐L ‐NEt)₂(PPh₃)₂] ( 4 ). All complexes were characterized with analytical data, IR and NMR spectroscopy, and X‐ray crystallography. Complexes 2 – 4 , 7 , and 8 each formed crystals in the triclinic system with P$\bar{1}$ space group, whereas complexes 1 , 5 , and 6 crystallized in the monoclinic crystal system with space groups P2₁/c, C2/c, and P2₁/n, respectively. Complex 2 has shown two independent molecules, [(CuBr(κ¹‐S‐L ‐NMe)(PPh₃)₂] and [CuBr(PPh₃)₂] in the unit cell. For X = Cl, the thio‐ligand bonded to metal as terminal in complex 4 , whereas for X = I it is sulfur‐bridged in complex 3 .     

Design,Synthesis, Antifungal Activities and SARs of (R)‐2‐Aryl‐4,5‐dihydrothiazole‐4‐carboxylic Acid Derivatives

Based on the structure of natural product 2‐aryl‐4,5‐dihydrothiazole‐4‐carboxylic acid, a series of novel (R)‐2‐aryl‐4,5‐dihydrothiazole‐4‐carboxylic acid derivatives were designed and synthesized. Their structures were characterized by ¹H NMR, ¹³C NMR and HRMS. The single crystal structure of compound 9b was determined by X‐ray diffraction analysis. The antifungal activities were evaluated for the first time. The bioassay results indicated that most compounds exhibited moderate to good antifungal activities. The antifungal activities of compound 13a (against Cercospora arachidicola Hori), 13d (against Alternaria solani), and 16e (against Cercospora arachidicola Hori) were 61.9%, 67.3% and 61.9%, respectively, which are higher than those of the commercial fungicides chlorothalonil and carbendazim. Moreover, compound 13d exhibited excellent antifungal activities against 7 kinds of the fungi tested (66.7%, 77.3%, 63.0%, 87.9%, 70.0%, 70.0% and 80.0% at 50 µg?mL). Therefore, 13d can be used as a new lead structure for the development of antifungal agents.     

Design,Synthesis, and Insecticidal Activity of 1,5‐Diphenyl‐1‐pentanone Analogues

Three series of novel 1,5‐diphenyl‐1‐pentanone derivatives were designed and synthesized. Their structures were characterized by IR, ¹H NMR techniques, and elemental analysis. The insecticidal activities of the new compounds were preliminarily evaluated. The bioassay results indicated that the compounds X11 – X30 displayed better aphicidal activity against Aphis gossypii than compounds X1 – X10 and the lead compound (E)‐1,5‐diphenyl‐1‐penten‐1‐one ( A ). The inhibitory rates of compounds X6 and X29 were 100% against Plutella xylostella (L.) at 600 mg·L^?1. Compounds X12 , X13, X19 , X24, X25 , X26 and X27 showed higher insecticidal activity against Tetranychus cinnabarinus (Boisduval) at 600 mg·L^?1 than the lead compound ( A ).     

1,2,3-三唑取代的1,4-二氢-4-氧代-1,5-二氮杂萘-3-羧酸衍生物的设计、合成与HIV整合酶抑制活性评价

一价铜催化端炔与叠氮化物的1, 3-环加成反应是一种快速构建小分子库并筛选其可能性质的的主要方法。本文报道了1,2,3-三唑取代的1,4-二氢-4-氧代-1,5-二氮杂萘-3-羧酸衍生物的设计与合成。在该类化合物中,疏水性与亲水性片段通过Click反应有效地连接。所设计化合物8和12的结构通过光谱手段进行了表征;其可能的HIV整合酶抑制活性也进行了筛选。     

New Substituted 1‐Aryl‐4,4,6‐Trimethyl‐3,4‐Dihydropyrimidine‐2‐(1H)Thiones; A Metal‐Free and Solvent‐Free Synthesis,Characterization, and Lymphoid Tyrosine Phosphatase Inhibition Studies

A series of fourteen 3,4‐dihydropyrimidine‐2‐thiones ( 3a–n ) were synthesized by a green protocol, and their structures were characterized by spectroanalytical data. The compounds were obtained in high yields by efficient annulation of mesityl oxide (4‐methylpent‐3‐en‐2‐one) with anilines in the presence of potassium thiocyanate. The reaction is essentially metal‐catalyst‐ and solvent‐free, as mesityl oxide itself is the solvent as well as the reactant. The compounds were tested for their ability to inhibit the lymphoid tyrosine phosphatase PTPN22, and 5 of the 14 compounds exhibited IC₅₀ values in the mid‐micromolar range, with the most potent hit being the compound 3d , having a methoxy substituent at the 2‐position of the phenyl ring with an IC₅₀ = 18 ± 1 μM, and second most potent compound ( 3c ) with an IC₅₀ value of 45 ± 3 μM, having methyl substituents at both 2‐ and 4‐position of the phenyl ring.     

Microwave‐assisted extraction and high‐throughput monolithic‐polymer‐based micro‐solid‐phase extraction of organophosphorus,triazole, and organochlorine residues in apple

A high‐throughput micro‐solid‐phase extraction device based on a 96‐well plate was constructed and applied to the determination of pesticide residues in various apple samples. Butyl methacrylate and ethylene glycol dimethacrylate were copolymerized as a monolithic polymer and placed in the cylindrically shaped stainless‐steel meshes of 96‐micro‐solid‐phase extraction device and used as an extracting unit. Before the micro‐solid‐phase extraction, microwave‐assisted extraction was employed to facilitate the transfer of the pesticide residues from the apple matrix to liquid media. Then, 1 mL of the aquatic samples was transferred into the 96‐well plate and the 96‐micro‐solid‐phase extraction device was applied for the extraction of the selected pesticides. Influential parameters, such as sorbent‐to‐sorbent reproducibility, microwave‐assisted extraction time, ionic strength and micro‐solid‐phase extraction time, were optimized. The limits of quantitation were below 120 μg/kg, which are lower than the maximum residue limits. The developed method was successfully implemented for the extraction and determination of the selected pesticides from 20 different apple samples gathered from local markets. Phosalone was identified and quantified at the concentration level of 147 (±16.4) μg/kg in one of the samples.